Results for “angle” — Page 4

DOE OSTI2024

Electronic angle focusing for neutron time-of-flight powder diffractometers

A neutron time-of-flight (TOF) powder diffractometer with a continuous wide-angle array of detectors can be electronically focused to make a single pseudo-constant wavelength diffraction pattern, thus facilitating angle-dependent intensity corrections. The resulting powder diffraction peak profiles are affected by the neutron source emission profile and resemble the function currently used for TOF diffraction.

electronic focusing↗

DOE OSTI2026

Correlation-aware binning for small-angle neutron scattering via Gaussian-process inference

Binning in small-angle neutron scattering (SANS) is typically performed empirically, with fixed parameters chosen for convenience rather than statistical optimality. Such practices often fail to balance statistical precision and spatial resolution, leading to inconsistencies across instruments and datasets. Here we establish a correlation-aware framework that determines the optimal bin width from first principles by extending the classical Freedman–Diaconis (FD) rule to account for inter-bin correlations with a Gaussian process. In this formulation, the scattering intensity is treated as a smooth stochastic field whose statistical coherence is described by a covariance matrix. Analytical expressions of errors derived from this model yield closed-form criteria that separate the total deviation into contributions from counting noise, aliasing distortion and curvature-dependent correlation effects. Expressed in reduced variables, the resulting dimensionless error surface reveals a continuous transition from the uncorrelated FD regime to the correlation-dominated limit, providing a unified description of noise suppression and resolution control. Because the formulation depends only on the profile characteristics of scattering intensity I(Q), specifically its average intensity and first- and second-order derivatives, it applies generally to any SANS measurement regardless of sample, instrument or geometry. Experimental validation using small- and ultra-small-angle neutron scattering data confirms the predicted scaling behavior, demonstrating that correlation-aware inference systematically reduces mean-squared error and enables information-efficient reproducible data reduction across materials and instruments.

Tung, Chi-Huan [ORNL] (ORCID:0000000221972074)↗

DOE OSTI2026

Analytical desmearing of Bonse–Hart ultra-small-angle neutron scattering data via truncated Abel inversion

A non-iterative analytical framework based on the truncated Abel inversion is developed for desmearing Bonse–Hart ultra-small-angle neutron scattering (USANS) data. The method directly inverts the slit-averaged intensity without empirical extrapolation or iterative regularization, establishing a closed-form relationship between the measured and intrinsic scattering profiles. Numerical benchmarks on representative models, including a rigid-line form factor, a Lorentzian function and a fractal structural model, demonstrate quantitative recovery of the ground-truth intensity across the full Q range. Application to a deuterated polystyrene/poly(2-vinylpyridine) blend further confirms that the approach yields smooth continuous profiles consistent with companion small-angle neutron scattering data. The truncated Abel inversion thus provides a stable, model-independent and physically transparent route for accurate desmearing of Bonse–Hart USANS measurements.

Huang, Guan-Rong [National Tsing Hua University, T↗

DOE OSTI2026

Feasibility of Correlation-Aware Inference and Universal Precision Scaling in Bonse–Hart Ultra-Small-Angle Neutron Scattering

Bonse–Hart ultra-small-angle neutron scattering (USANS) provides access to micrometre-scale structure, but useful measurements often require long counting times. In this work, we test whether the expected smoothness of the scattering profile can be exploited to improve data quality at lower counting statistics. We apply a Gaussian-process-based method to Bonse–Hart USANS data and evaluate its performance on pseudo-measurements generated from high-statistics experiments under Poisson statistics. This provides a stringent test of how well the underlying I(Q) profile can be reconstructed when the available counts are substantially reduced. We further show that, in the counting-limited regime, the reconstruction error follows a universal scaling behaviour that differs from the usual independent-counting expectation. At higher counts, the improvement crosses over to a resolution-limited regime set by analyser-angle discretization and rocking-curve width. These results clarify when correlation-aware inference is useful in USANS and provide a practical basis for improving measurement efficiency and beam-time usage.

Tung, Chi-Huan [ORNL] (ORCID:0000000221972074)↗

DOE OSTI2024

Performance of the first mechanically-coupled twisting heliostat: encircled energy vs angle of incidence, and closed loop tracking

The first automatic twisting heliostat, with 8 m2 reflector, was completed and tested on-sun in January 2024. It was set up on a target-oriented dual-axis mount, with the target-axis aimed at a target 113 m to the west. The shape-twisting is purely automatic, made by a mechanical cam coupling to the cross-axis, which turns as the angle of incidence of the sun’s rays on the reflector. Three unsaturated images taken at different times of day were recorded of the sun on the target, reflected at angles of incidence of 5°, 49° and 68°. The measured FWHM of three images is very similar, about 1.09 m or 9.5 mrad, only slightly larger than an ideal solar disc, indicating that the different twisted reflector shapes are close to the ideal biconics needed to image the sun. The encircled energy measured for all three images was similar, 87% within approximately 1.30 m diameter. We report here also on a novel, tracking camera that employs a semitransparent beamsplitter fixed perpendicular to the mirror surface and to the plane of incidence. Over 2.5 hours of measurement of closed loop tracking, errors were ≤ 0.36 mrad rms, in both tracking axes.

14 SOLAR ENERGY↗

DOE OSTI2026

Dataset for the paper titled "Investigating the relationship between bolide entry angle and apparent direction of infrasound signal arrivals"

This dataset includes outputs generated for the journal publication titled: "Investigating the relationship between bolide entry angle and apparent direction of infrasound signal arrivals". The outputs include .csv files with model-generated synthetic trajectories of asteroids entering Earth at a variety of impact and approach (azimuthal) angles. All outputs are based on hypothetical but realistic scenarios.

Herrera, Natalie [Sandia National Laboratories (SN↗

DOE OSTI2025

Low blaze angle grating for fully dispersive x-ray spectroscopy

We demonstrate fabrication of an ultra-low blaze angle (LBA) grating designed for time-resolved spectroscopy in the x-ray region. A blaze angle of 0.12° was achieved by the groove depth reduction process providing a perfect saw-tooth shape of the grooves. The 200 lines/mm LBA grating exhibited high diffraction efficiency at a photon energy of 8 KeV. Use in a spectrometer would open up dispersive x-ray absorption spectroscopy across a wide energy range including the K edges of 3d transition metals, with much greater efficiency than traditional crystal spectrometers.

Voronov, D. L.↗

DOE OSTI2025

Autonomous Infrared and Small (Wide) Angle X-Ray Scattering (IR-S(W)AXS) Capability

Thin water films are 2-D, nanoconfined layers that form on solid surfaces exposed to humid atmospheres—environments ubiquitous across catalysis, corrosion science, soil science, and subsurface geochemistry. At relative humidity (RH) values below saturation, these films are Å–nm thick and exhibit properties that differ sharply from bulk water, including disrupted H-bonding and impeded mass transport. Owing to their high surface-to-volume ratio, dissolution of the solid can rapidly drive strong supersaturation with respect to secondary phases. Reactivity in thin water films is highly sensitive to film thickness, and critically, thickness evolves during reaction because the hygroscopicity of the interfacial system changes as ions accumulate or diminish in the film and as reaction products transform. To accurately probe and control these dynamics, a capability is needed that can measure and automatically maintain a constant water-film thickness while simultaneously monitoring solid dissolution, nucleation, and growth. This project developed an autonomous Infrared/Small Angle X-ray Scattering-Wide Angle X-ray Scattering (IR/(W)SAXS) for investigating reactivity in thin water films on solid surfaces exposed to humidified gases. The capability consists of an IR spectrometer, a (W)SAXS instrument, and a mass flow controller system for generating variably humidified gas flows to a custom reaction cell. Progress on each of the major components of the capability are detailed below.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2026

Constraining Cosmic Birefringence with Polarization Angle Calibration

The Cosmic Microwave Background (CMB) is a sensitive probe of cosmic birefringence, which, if detected, would imply physics beyond the standard model. For example, cosmic birefringence can be caused by axion-like pseudo scalar-fields coupling to photons via the Chern-Simons effect. These represent favored candidates for dark matter particles and are used in models to explain dark energy. However, measuring cosmic birefringence with CMB experiments requires exceptional polarization angle calibration to disentangle instrumental effects from this elusive signal. I will give an overview of the current state of the art in CMB polarization angle calibration on Simons Observatory and its implications for constraints on cosmic birefringence.

Simon, Sara M. [Fermilab] (ORCID:0000000192217802)↗

DOE OSTI2026

Constraining Cosmic Birefringence with Polarization Angle Calibration

The Cosmic Microwave Background (CMB) is a sensitive probe of cosmic birefringence, which, if detected, would imply physics beyond the standard model. For example, cosmic birefringence can be caused by axion-like pseudo scalar-fields coupling to photons via the Chern-Simons effect. These represent favored candidates for dark matter particles and are used in models to explain dark energy. However, measuring cosmic birefringence with CMB experiments requires exceptional polarization angle calibration to disentangle instrumental effects from this elusive signal. I will give an overview of the current state of the art in CMB polarization angle calibration on Simons Observatory and its implications for constraints on cosmic birefringence.

Simon, Sara M. [Fermilab] (ORCID:0000000192217802)↗

DOE OSTI2024

Three-Dimensional Aerodynamics and Vortex-Shedding Characteristics of Wind Turbine Airfoils over 360-Degree Angles of Attack

In this work, we present the first three-dimensional (3D) computational investigation of wind turbine airfoils over 360° angles of attack to predict unsteady aerodynamic loads and vortex-shedding characteristics. To this end, static–airfoil simulations are performed for the FFA-W3 airfoil family at a Reynolds number of 107 with the Improved Delayed Detached Eddy Simulation turbulence model. Aerodynamic forces reveal that the onset of boundary-layer instabilities and flow separation does not necessarily coincide with the onset of stall. In addition, a comparison with two-dimensional simulation data and flat plate theory extension of airfoil polars, suggest that, in the deep stall regime, 3D effects remain critical for predicting both the unsteady loads and the vortex-shedding dynamics. For all airfoils, the vortex-shedding frequencies are found to be inversely proportional to the wake width. In the case of slender airfoils, the frequencies are nearly independent of the airfoil thickness, and their corresponding Strouhal number St is approximately 0.15. Based on the calculated St, the potential for shedding frequencies to coincide with the natural frequencies of the International Energy Agency 15 MW reference wind turbine blades is investigated. The analysis shows that vortex-induced vibrations occur primarily at angles of attack of around ±90° for all airfoils.

17 WIND ENERGY↗

DOE OSTI2025

A Quantum Computational Determination of the Weak Mixing Angle in the Standard Model

The weak mixing angle $s_W$ is a fundamental constant in the Standard Model (SM) and measured at the $Z$ boson mass to be $\widehat{s}^2_W(m_Z) = 0.23129 \pm 0.00004$ in the $\overline{\rm MS}$ renormalization scheme, where $m_Z=91.2\ \text{GeV}$. On the other hand, non-stabilizerness - the magic - characterizes the computational advantage of a quantum system over classical computers. We consider the production of magic from stabilizer initial states, which carry zero magic, in the 2-to-2 scattering of charged leptons in the SM at the tree level, which is mediated by the photon and the $Z$ boson. Using the second order stabilizer Rényi entropy, and averaging over all 60 initial stabilizer states and the scattering angle, we compute and minimize the magic production as a function of $s^2_W$ in the Møller scattering $e^-e^-\to e^-e^-$, which is free of kinematic thresholds. At the centre-of-mass energy $\sqrt{s}=m_Z$, there is a unique minimum in magic production at $\mathbf{s}^{2}_W(m_Z)=0.2317$, which agrees with the measured $\widehat{s}^2_W(m_Z)$ at the sub-percent level. At higher energies, the magic-minimizing $\mathbf{s}^{2}_W$ continues to agree with the empirical value at the percent level or better, up to 10 TeV. The finding suggests the electroweak sector of the SM tends to generate minimal quantum resources from the computational viewpoint.

Liu, Qiaofeng [Northwestern U.]↗

DOE OSTI2025

A Quantum Computational Determination of the Weak Mixing Angle in the Standard Model

The weak mixing angle $s_W$ is a fundamental constant in the Standard Model (SM) and measured at the $Z$ boson mass to be $\widehat{s}^2_W(m_Z) = 0.23129 \pm 0.00004$ in the $\overline{\rm MS}$ renormalization scheme, where $m_Z=91.2\ \text{GeV}$. On the other hand, non-stabilizerness - the magic - characterizes the computational advantage of a quantum system over classical computers. We consider the production of magic from stabilizer initial states, which carry zero magic, in the 2-to-2 scattering of charged leptons in the SM at the tree level, which is mediated by the photon and the $Z$ boson. Using the second order stabilizer Rényi entropy, and averaging over all 60 initial stabilizer states and the scattering angle, we compute and minimize the magic production as a function of $s^2_W$ in the Møller scattering $e^-e^-\to e^-e^-$, which is free of kinematic thresholds. At the centre-of-mass energy $\sqrt{s}=m_Z$, there is a unique minimum in magic production at $\mathbf{s}^{2}_W(m_Z)=0.2317$, which agrees with the measured $\widehat{s}^2_W(m_Z)$ at the sub-percent level. At higher energies, the magic-minimizing $\mathbf{s}^{2}_W$ continues to agree with the empirical value at the percent level or better, up to 10 TeV. The finding suggests the electroweak sector of the SM tends to generate minimal quantum resources from the computational viewpoint.

Liu, Qiaofeng [Northwestern U.]↗

DOE OSTI2025

A Quantum Computational Determination of the Weak Mixing Angle in the Standard Model

The weak mixing angle $s_W$ is a fundamental constant in the Standard Model (SM) and measured at the $Z$ boson mass to be $\widehat{s}^2_W(m_Z) = 0.23129 \pm 0.00004$ in the $\overline{\rm MS}$ renormalization scheme, where $m_Z=91.2\ \text{GeV}$. On the other hand, non-stabilizerness - the magic - characterizes the computational advantage of a quantum system over classical computers. We consider the production of magic from stabilizer initial states, which carry zero magic, in the 2-to-2 scattering of charged leptons in the SM at the tree level, which is mediated by the photon and the $Z$ boson. Using the second order stabilizer Rényi entropy, and averaging over all 60 initial stabilizer states and the scattering angle, we compute and minimize the magic production as a function of $s^2_W$ in the Møller scattering $e^-e^-\to e^-e^-$, which is free of kinematic thresholds. At the centre-of-mass energy $\sqrt{s}=m_Z$, there is a unique minimum in magic production at $\mathbf{s}^{2}_W(m_Z)=0.2317$, which agrees with the measured $\widehat{s}^2_W(m_Z)$ at the sub-percent level. At higher energies, the magic-minimizing $\mathbf{s}^{2}_W$ continues to agree with the empirical value at the percent level or better, up to 10 TeV. The finding suggests the electroweak sector of the SM tends to generate minimal quantum resources from the computational viewpoint.

Liu, Qiaofeng [Northwestern U.]↗

DOE OSTI2026

Polarization Angle Swings in Blazars Detected in the Millimeter-wave with the South Pole Telescope

We present the first systematic search for electric vector position angle (EVPA) swings in the millimeter-wave (mm-wave) emission of blazars, using five years of observations from the South Pole Telescope SPT-3G camera at 95 and 150 GHz, and investigate their connection to gamma-ray flares. Of the 168 bright sources in the ~1500 square degrees SPT-3G Main Field, eight have sufficient polarization signal-to-noise for reliable EVPA measurement, four of which have continuous Fermi LAT gamma-ray detections. We detect EVPA swings in all four gamma-ray-active blazars and in none of the remaining four, consistent with the established connection between EVPA swings and high-energy emission seen at optical wavelengths. The observed swing amplitudes and rotation rates are smaller than those found in optical studies, consistent with mm-wave EVPA variability being slower than at shorter wavelengths. Random walk simulations of the polarization angle using a multi-cell model fail to reproduce both the number, amplitude, and duration of the observed swings, suggesting that this mechanism is insufficient to explain the observed swing population. Analysis of EVPA variability on one-week timescales is consistent with the anti-correlation between polarization degree and EVPA rotation rate previously observed at optical wavelengths. Of the 14 detected swings, eight are within 30 days of a gamma-ray flare. While many individual swing-flare associations are found to have a very low probability of happening by chance, the full ensembles of 95 and 150 GHz swing time lags with respect to gamma-ray flares are found to be consistent with random coincidence.

Simpson, A. [Chicago U., Astron. Astrophys. Ctr.; ↗

DOE OSTI2025

Selective deuteration of an RNA:RNA complex for structural analysis using small-angle scattering

The structures of RNA:RNA complexes regulate many biological processes. Despite their importance, protein-free RNA:RNA complexes represent a tiny fraction of experimentally determined structures. Here, we describe a joint small-angle X-ray and neutron scattering (SAXS/SANS) approach to structurally interrogate conformational changes in a model RNA:RNA complex. Using SAXS, we measured the solution structures of the individual RNAs and of the overall RNA:RNA complex. With SANS, we demonstrate, as a proof of principle, that isotope labeling and contrast matching (CM) can be combined to probe the bound state structure of an RNA within a selectively deuterated RNA:RNA complex. Furthermore, we show that experimental scattering data can validate and improve predicted AlphaFold 3 RNA:RNA complex structures to reflect its solution structure. In conclusion, our work demonstrates that in silico modeling, SAXS, and CM-SANS can be used in concert to directly analyze conformational changes within RNAs when in complex, enhancing our understanding of RNA structure in functional assemblies.

HIV-1 dimerization initiation site↗

DOE OSTI2025

Stimulating β -Series Precipitation in Mg–Nd Alloys Via Microalloying: A Comparison of Electron Microscopy and Small-Angle Scattering Techniques

The Mg–Nd alloy system is of particular interest in the development of high-strength, lightweight structural alloys due to the formation of strengthening metastable Mg–Nd β-series precipitates during heat treatment. The strengthening is primarily provided by a combination of the β''' and β 1 precipitation. It is therefore important to understand how the precipitation behavior can be enhanced by other common alloying elements. In this work, the effects of 0.2 wt pct Zn and Ca on β-series precipitation were studied. Small-angle/ultra-small-angle X-ray scattering (SAXS/USAXS) techniques in combination with scanning transmission electron microscopy (STEM) were used to study the evolution of precipitation microstructure. Here, it is found that the Zn additions refine the precipitates, leading to an increase in hardness with aging at 200 °C. On the other hand, the Ca additions result in an acceleration in the formation of larger β 1 precipitates and chains which provides less strengthening. The β 1 chains are surrounded by precipitate-free zones (PFZs) that further contribute to the decreases in hardness observed in the over-aged condition. This paper demonstrated that SAXS/USAXS provides a powerful tool for an in situ study of the early stages of precipitation in the Mg–Nd-based alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Interpretation of wide-angle x-ray diffraction patterns from mesophase pitch-based carbon fibers – a simulation and experimental study

Carbon fiber is a critical material in a wide range of industries, where it is highly valued for its high specific strength/stiffness, excellent wear resistance, efficient electrical and thermal transport properties, chemical resistance, and low coefficient of thermal expansion. The properties of a specific carbon fiber are closely tied to its structural characteristics at all length scales. Here, in this work, we applied wide-angle x-ray diffraction to a set of heat-treated mesophase pitch-based carbon fibers, with the goal of elucidating the crystalline structures as a function of fiber orientation. To assist with analysis and interpretation of the experimental data, we employed diffraction pattern simulations using the scalar and vector forms of the Debye scattering equation to determine the influence of basal plane orientation, crystalline ordering (turbostratic-graphitic), and basal plane asymmetry on the diffraction patterns. The results presented here suggest that growth of the transverse crystallites in mesophase pitch-based carbon fiber is fixed until graphitization temperatures are reached. The work completed here provides a framework for the analysis of carbon fiber and other oriented carbon-based materials via diffraction.

36 MATERIALS SCIENCE↗