Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “active defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Proton Effects and Test Issues for Satellite Designers: Displacement Effects - Section 4

Microelectronic and photonic systems in the natural space environment are bombarded by a variety of charged particles including electrons, trapped protons, cosmic rays, and solar particles (protons and other heavy ions). These incident particles cause both ionizing and non-ionizing effects when traversing a device, and the effects can be either transient or permanent. The vast majority of the kinetic energy of an incident proton is lost to ionization, creating the single event effects (SEES) and total ionizing dose (TID) effects described in section IVA. However, the small portion of energy lost in non-ionizing processes causes atoms to be removed from their lattice sites and form permanent electrically active defects in semiconductor materials. These defects, i.e., "displacement damage," can significantly degrade device performance. In general, most of the displacement damage effects in the natural space environment can be attributed to protons since they are plentiful and extremely energetic (and therefore not readily shielded against). For this reason, we consider only proton induced displacement damage in this course. (Nevertheless, we identify solar cells as an important example of a case where both electron and proton damage can be important since only very light shielding is feasible.) The interested reader is encouraged to explore the three previous NSREC and RADECS short courses [Srou88a, Summ92, Hopk97] which also treat displacement damage issues for satellite applications. Part A of this segment of the short course introduces the space environment, proton shielding issues, and requirements specifications for proton-rich environments. In order to exercise the displacement damage analysis tools for on-orbit performance predictions, the requirements document must provide the relevant proton spectra in addition to the usual total ionizing dose-depth curves.

Marshall, Cheryl J.↗
NASA NTRS1999

Proton Effects and Test Issues for Satellite Designers

Microelectronic and photonic systems in the natural space environment are bombarded by a variety of charged particles including electrons, trapped protons, cosmic rays, and solar particles (protons and other heavy ions). These incident particles cause both ionizing and non-ionizing effects when traversing a device, and the effects can be either transient or permanent. The vast majority of the kinetic energy of an incident proton is lost to ionization, creating the single event effects (SEES) and total ionizing dose (TID) effects. However, the small portion of energy lost in non-ionizing processes causes atoms to be removed from their lattice sites and form permanent electrically active defects in semiconductor materials. These defects, i.e., "displacement damage," can significantly degrade device performance. In general, most of the displacement damage effects in the natural space environment can be attributed to protons since they are plentiful and extremely energetic (and therefore not readily shielded against). For this reason, we consider only proton induced displacement damage in this course. (Nevertheless, we identify solar cells as an important example of a case where both electron and proton damage can be important since only very light shielding is feasible.) The interested reader is encouraged to explore the three previous NSREC and RADECS short courses which also treat displacement damage issues for satellite applications. Part A of this segment of the short course introduces the space environment, proton shielding issues, and requirements specifications for proton-rich environments. In order to exercise the displacement damage analysis tools for on-orbit performance predictions, the requirements document must provide the relevant proton spectra in addition to the usual total ionizing dose-depth curves. Ion-solid interactions and the nature of the displacement damage they generate have been studied extensively for over half a century, yet they still remain a subject of investigation. In this section, a description of the mechanisms by which displacement damage is produced will be followed by a summary of the major consequences for device performance in a space environment. Often the degradation of a device parameter can be characterized by a damage factor (measured in a laboratory using monoenergetic protons) that is simply the change in a particular electrical or optical parameter per unit proton fluence. In addition, we will describe the concept of a non-ionizing energy loss rate (NIEL) which quantifies that portion of the energy lost by an incident ion that goes into displacements. It has been calculated as a function of proton energy, and is analogous to (and has the same units as) the linear energy transfer (LET) for ionizing energy. We will discover that, to first order, the calculated NIEL describes the energy dependence of the measured device damage factors. This observation provides the basis for predicting proton induced device degradation in a space environment based on both the calculated NIEL and relatively few laboratory test measurements. The methodology of such on-orbit device performance predictions will be described, as well as the limitations. Several classes of devices for which displacement damage is a significant (if not the dominant) mode of radiation induced degradation will be presented.

Marshall, Cheryl J.↗
DOE OSTI2020

Thallium Bromide Semiconductor Radiation Materials and Detectors Characterization Studies

Two overarching requirements of crucial importance for the commercial and scientific establishment of semiconductor radiation detectors are: (1) exceptionally high-purity crystals with impurity concentrations less than 1 part-per-billion and (2) single crystals that are relatively free from subgrain boundaries, secondary phases, dislocations, and other electrically-active defects. We investigated the properties of thallium bromide (TlBr) material that affect its performance with the goal of increasing the material's commercial viability for radiation detection applications. For this purpose, we used beamlines at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL), performing Micron-scale X-ray Detector Mapping, White Beam X-ray Diffraction Topography, and Micron-scale X-ray Fluorescence. These characterization methods improve the industry's understanding of TlBr and lead to the production of improved instrumentation. In this particular study we report electro-migration measurements of positive-ion Cu, Ag, and Au impurities in TlBr detectors under electric field strengths typically used for device operation. BNL improved TlBr detectors with an electrode design that corrects the response non-uniformities caused by crystal defects. This design can achieve improved energy resolution while using typical-grade, commercial crystals with relaxed quality requirements, thus reducing the overall cost of detectors. Additional characterization will be necessary to fully understand the structure and performance of TlBr with the ultimate goal to achieve the highest energy resolution. Our findings from past work will be presented along with our recommendations for additional investigation.

36 MATERIALS SCIENCE↗
NASA NTRS2022

Assurance Equations: A Cost and Criticality Model for Optimizing Quality Assurance Surveillance

The cost of quality vs cost of failure correction has been a long-running topic of discussion within the Aerospace community. It leads directly to concepts of “risk tolerance”, and risk-based decision-making. It would be valuable if there was a way to compute the optimal investment in customer-executed quality assurance activities using defect significance with respect to performance objectives, the activities’ defect detection effectiveness, and the cost-penalty for late discovery of impactful defects. This optimization is particularly of interest to projects whose budget constraints significantly limit their risk management options.The cost to fix defects (i.e., failure correction) escalates as the project matures. There have been studies attempting to determine the relative cost of fixing defects discovered during various phases of a project life cycle with important implications, all of which suggest growth factors are large. The commonly referred to 1:10:100 rule represents a cost multiplier for repair/rework across the Design to Fab to Test hardware development phases. Cost premiums for QA activities also accumulate when they are treated as mandatory (due to schedule drag) or are performed later than their assigned phase.This paper describes the modeling of development phase -dependencies in the conduct of typical customer-executed quality assurance activities. Our initial modeling encompasses:• Distinct phases of the production lifecycle• Multiple kinds of Defects, each with some a-priori likelihood of being present• Each defect’s impact on performance Objectives for a type of hardware• The cost and efficacy of assurance techniques at detecting such Defects• The costs of fixing those Defects detected in a given phase of the production lifecycleThe model captures assurance activities’ abilities to Detect defects. Upon detection it is assumed that the Defect is immediately fixed. Defects that “escape” detection by some activity may thereafter be detected by a later activity, but by then the cost of fixing the Defect may have escalated. Defects are related to the performance Objectives they would detract from, were those Defects to remain present in the operating system.We have constructed and are exploring, a model that relates the importance of hardware system elements to mission objectives, the impact of types of Defects on those hardware types, the cost of customer-executed assurance activities (i.e., supplier controls) and their effectiveness towards reducing an impactful quality escape, and the cost of Defect correction across production phase. We describe the approach taken to select the key model aspects, why they are relevant to our NASA mission, and our efforts to populate it with relevant and contemporary data. We use a notional example to illustrate model design and function.

Plante, Jeannette↗
DOE OSTI2022

Active and passive defects in tetragonal tungsten bronze relaxor ferroelectrics

Tetragonal tungsten bronze (TTB) based oxides constitute a large family of dielectric materials which are known to exhibit complex distortions producing incommensurately modulated superstructures as well as significant local deviations from their average symmetry. The local deviations produce diffuse scattering in diffraction experiments. The structure as well as the charge dynamics of these materials are anticipated to be sensitive to defects, such as cation or oxygen vacancies. In this work, in an effort to understand how the structural and charge dynamical properties respond to these two types of vacancy defects, we have performed measurements of dielectric susceptibilities and single crystal diffraction experiments of two types of TTB materials with both ‘filled’ (Ba 2 NdFeNb 4 O 15 and Ba 2 PrFeNb 4 O 15 ) and ‘unfilled’ (Sr 0.5 Ba 0.5 Nb 2 O 6 ) cation sublattices. We also perform these measurements before and after oxygen annealing, which alters the oxygen vacancy concentrations. Surprisingly, we find that many of the diffuse scattering features that are present in the unfilled structure are also present in the filled structure, suggesting that the random fields and disorder that are characteristic of the unfilled structure are not responsible for many of the local structural features that are reflected in the diffuse scattering. Furthermore, oxygen annealing clearly affected both color and dielectric properties, consistent with a diminishment of the oxygen vacancy concentration, but had little effect on observed diffuse patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Microdynamics of active particles in defect-rich colloidal crystals

Hypothesis. Because they are self-propulsive, active colloidal particles can interact with their environment in ways that differ from passive, Brownian particles. Here, we explore how interactions in different microstructural regions may contribute to colloidal crystal annealing. Experiments. We investigate active particles propagating in a quasi-2D colloidal crystal monolayer produced by alternating current electric fields (active-to-passive particle ratio ~ 1:720). The active particle is a platinum Janus sphere propelled by asymmetric decomposition of hydrogen peroxide. Crystals are characterized for changes in void properties. The mean-squared-displacement of Janus particles are measured to determine how active microdynamics depend on the local microstructure, which is comprised of void regions, void-adjacent regions (defined as within three particle diameters of a void), and interstitial regions. Findings. At active particle energy E A = 2.55 k B T, the average void size increases as much as three times and the average void anisotropy increases about 40% relative to the passive case. Further, the average microdynamical enhancement, <δ(t)>, of Janus particles in the crystal relative to an equivalent passive Janus particle is reduced compared to that of a free, active particle (<δ(t) > is 1.88 ± 0.04 and 2.66 ± 0.08, respectively). The concentration of active particles is enriched in void and void-adjacent regions. Active particles exhibit the greatest change in dynamics relative to the passive control in void-adjacent regions (<δ(t)> = 2.58 ± 0.06). The results support the conjecture that active particle microdynamical enhancement in crystal lattices is affected by local defect structure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis

The scarcity and high cost of PGM electrocatalysts are the key bottleneck in the mass-scale commercialization of many electrolysis technologies. Bifunctional single-atom electrocatalysts (SACs) are promising alternatives for PGM electrocatalysts in next-generation electrolysis technologies because of their superior intrinsic activity and perfect atom utilization. Regulating the coordination environment of platinum atomic sites identifies their electrocatalytic performance. Therefore, exploring more appropriate supports could facilitate the construction of active and durable electrocatalysts with ultralow noble metal content. Herein, we report on a reliable approach for producing a novel type of SACs composed of atomically dispersed Pt active sites stabilized on defective NiCo layered double hydroxide (Pt/D-NiCo LDH) nanosheets as an ultralow-Pt hybrid electrocatalyst for hydrogen evolution reaction (HER), urea oxidation reaction (UOR), and full urea-water electrolysis. The optimized Pt 1 /D NiCo LDH-24 SAC displays a remarkable HER and UOR performance where it yields a current density of 10 mA cm -2 at 37 mV and 1.25 V vs. RHE for HER and UOR, respectively. Finally, symmetrical urea electrolyzer constructed of Pt 1 /D-NiCo LDH-24 electrodes attains 10 mA cm -2 at a cell voltage of 1.32 V vs. RHE, demonstrating superior activity and durability over 60 h operation when compared to commercial Pt/C( + )||RuO 2 ( - ) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge‐hosted Fe−N 3 Sites

Abstract Nitrogen‐doped, carbon‐supported transition metal catalysts are excellent for several reactions. Structural engineering of M−N x sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe−N 3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe−N 3 sites with varying Fe−N bond lengths distinguishable by X‐ray absorption spectroscopy. We investigate the CTH activity by density‐functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe−N 3 distortion, raises the Fe orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe−N bond length, an excellent activity descriptor. We elucidate the origin of the CTH activity and principles for high‐performing Fe−N−C catalysts by defect engineering.

Yang, Piaoping↗
DOE OSTI2023

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge–hosted Fe–N3 Sites

Nitrogen-doped, carbon-supported transition metal catalysts are excellent for several reactions. Structural engineering of metal-Nx sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe-N3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe-N3 sites with varying Fe-N bond lengths distinguishable by X-ray absorption spectroscopy. We investigate the CTH activity by density functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe-N3 distortion, raises the Fe [[EQUATION]]orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe-N bond length, an excellent activity descriptor. Furthermore, we elucidate the origin of the CTH activity and principles for high-performing Fe-N-C catalysts by defect engineering.

09 BIOMASS FUELS↗
DOE OSTI2022

Magnetic Imaging with Spin Defects in Hexagonal Boron Nitride

Optically active spin defects hosted in hexagonal boron nitride (ℎ-BN) are promising candidates for the development of a two-dimensional (2D) quantum sensing unit. Here, we demonstrate quantitative magnetic imaging with ℎ-BN flakes doped with negatively charged boron-vacancy ($V^{-}_{B}$) centers through neutron irradiation. As a proof-of-concept, we image the magnetic field produced by Cr⁢Te 2 , a van der Waals ferromagnet with a Curie temperature slightly above 300 K. Compared to other quantum sensors embedded in 3D materials, the advantages of the ℎ-BN-based magnetic sensor described in this work are its ease of use, high flexibility, and, more importantly, its ability to be placed in close proximity to a target sample. Further, such a sensing unit will likely find numerous applications in 2D materials research by offering a simple way to probe the physics of van der Waals heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Native Defects Hybridization and Electronic Transport in Cu 2 Se–CuGaSe 2 Hierarchical Composites

Engineering the energy distribution of electronic defects in semiconductors can afford the coexistence of degenerate and nondegenerate transport behavior. By leveraging native defects in Cu 2 Se and CuGaSe 2 phases, the tunability of the concentration and energy distribution of active electronic defects in hierarchical (1-x)Cu 2 Se-(x)CuGaSe 2 composites is demonstrated. This study found that the electrical conductivity of various composites decreases with rising temperature indicating degenerate semiconducting behavior, whereas the carrier density increases with temperature, which is consistent with non-degenerate semiconductivity. Remarkably, this study found that while the carrier density and electrical conductivity drop with the increasing CuGaSe 2 content for samples with x ≤ 0.45 is consistent with an increase in the activation energy of “active” electronic defects, the sudden increase by 140% in the electrical conductivity and by 109% in the carrier density for near equimolar composition suggests the formation of a large density of electronic defects with lower activation energy. This unusual behavior is understood within the context of the hybridization of coexisting native electronic defects to form degenerate hybrid acceptor states with lower activation energy. The reported unique electronic transport can be leveraged for the development of more versatile electronic and optoelectronic devices with superior performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pt-Ligand single-atom catalysts: tuning activity by oxide support defect density

The support–metal interaction is an important element of heterogeneous catalyst design and is particularly critical for the rapidly growing field of single-atom catalysts (SACs). In this work, we investigate the impact of varying the defect density of the titania support on metal–organic Pt SACs for hydrosilylation reactions. Pt SACs are decorated on the powder titania support, employing a metal–ligand interaction with a dipyridyl-tetrazine ligand (DPTZ). The single-atom nature of Pt is verified by X-ray absorption spectroscopy (XAS) on both pristine and defective titania surfaces. These Pt species have a +2 oxidation state and are stabilized by bonding with DPTZ, surface oxygen, and residual chloride from the metal precursor. The catalytic activity is evaluated for the alkene hydrosilylation reaction and it is discovered that the activity of Pt-ligand is positively correlated with the defect density of the titania support. The turn-over number (TON) is calculated to be 12 530 for Pt SACs on a defective surface, which is significantly higher than Pt SACs on a pristine titania surface (830) for the same reaction period (10 min) under the same conditions (70 °C). We ascribe the high activity of Pt SACs on defective titania surfaces to two aspects: the coordination of Pt with more chloride than on pristine titania surfaces, which shortens the induction period of the reaction, and the preferential dispersion of Pt–DPTZ units on defective regions of titania surfaces, allowing facile contact between Pt sites and reactants. The supported Pt–DPTZ SACs show high stability through multiple cycles of batch reactions. This work demonstrates an efficient approach to improve the activity and stability of SACs by optimizing the metal–support interaction, which can also be applied to other oxide surfaces to further develop next-generation heterogeneous single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

First-Principles Framework for the Prediction of Intersystem Crossing Rates in Spin Defects: The Role of Electron Correlation

Optically active spin defects in solids are promising platforms for quantum technologies. In this work, we present a first-principles framework to investigate intersystem crossing processes, which represent crucial steps in the optical spin-polarization cycle used to address spin defects. Considering the nitrogen-vacancy center in diamond as a case study, we demonstrate that our framework effectively captures electron correlation effects in the calculation of many-body electronic states and their spin-orbit coupling and electron-phonon interactions, while systematically addressing finite-size effects. We validate our predictions by carrying out measurements of fluorescence lifetimes, finding excellent agreement between theory and experiments. The framework presented here provides a versatile and robust tool for exploring the optical cycle of varied spin defects entirely from first principles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

High Capacity Adsorption—Dominated Potassium and Sodium Ion Storage in Activated Crumpled Graphene

In this study, structurally and chemically defective activated-crumbled graphene (A-CG) is employed to achieve unique synergy of large reversible potassium (K) and sodium (Na) ion storage capacity with fast charging and extended cyclability. A-CG synthesis consists of low temperature spraying of graphene oxide slurry, followed by partial reduction annealing and air activation. For K storage, the reversible capacities are 340 mAh g -1 at 0.04 A g -1 , 261 mAh g -1 at 0.5 A g -1 , and 210 mAh g -1 at 2 A g -1 . For Na storage, the reversible capacities are 280 mAh g -1 at 0.04 A g -1 , 191 mAh g -1 at 0.5 A g -1 , and 151 mAh g -1 at 2 A g -1 . A-CG shows a stable intermediate rate (0.5 Ag -1 ) cycling with both K and Na, with minimal fade after 2800 and 8000 cycles. These are among the most favorable capacity—rate capability—cyclability combinations recorded for potassium-ion battery and sodium-ion battery carbons. Electroanalytical studies (cyclic voltammetry, galvanostatic intermittent titration technique, b -value) and density functional theory (DFT) reveal that enhanced electrochemical performance originates from ion adsorption at various defects, such as Stone–Wales defects. Moreover, DFT highlights enhanced thermodynamic stability of A-CG with adsorbed K versus with adsorbed Na, explaining the unexpected higher reversible capacity with the former.

25 ENERGY STORAGE↗
DOE OSTI2025

Defect Diffusion Graph Neural Networks for Materials Discovery in High-Temperature Energy Applications

Here, the migration of crystallographic defects dictates material properties and performance for a plethora of technological applications. Density functional theory (DFT)-based nudged elastic band (NEB) calculations are a powerful computational technique for predicting defect migration activation energy barriers, yet they become prohibitively expensive for high-throughput screening of defect diffusivities. Without introducing hand-crafted (i.e., chemistry- or structure-specific) descriptors, we propose a generalized deep learning approach to train surrogate models for NEB energies of vacancy migration by hybridizing graph neural networks with transformer encoders and simply using pristine host structures as input. With sufficient training data, computationally efficient and simultaneous inference of vacancy defect thermodynamics and migration activation energies can be obtained to compute temperature-dependent vacancy diffusivities and to down-select candidates for more thorough DFT analysis or experiments. Thus, as we specifically demonstrate for potential water-splitting materials, candidates with desired defect thermodynamics, kinetics, and host stability properties can be more rapidly targeted from open-source databases of experimentally validated or hypothetical materials.

14 SOLAR ENERGY↗
DOE OSTI2021

Photoluminescence spectra of point defects in semiconductors: Validation of first-principles calculations

Optically and magnetically active point defects in semiconductors are interesting platforms for the development of solid state quantum technologies. Their optical properties are usually probed by measuring photoluminescence spectra, which provide information on excitation energies and on the interaction of electrons with lattice vibrations. We present a combined computational and experimental study of photoluminescence spectra of defects in diamond and SiC, aimed at assessing the validity of theoretical and numerical approximations used in first-principles calculations, including the use of the Franck-Condon principle and the displaced harmonic oscillator approximation. We focus on prototypical examples of solid state qubits, the divacancy centers in SiC and the nitrogen-vacancy in diamond, and we report computed photoluminescence spectra as a function of temperature that are in very good agreement with the measured ones. As expected we find that the use of hybrid functionals leads to more accurate results than semilocal functionals. Interestingly our calculations show that constrained density functional theory (CDFT) and time-dependent hybrid DFT perform equally well in describing the excited state potential energy surface of triplet states; our findings indicate that CDFT, a relatively cheap computational approach, is sufficiently accurate for the calculations of photoluminescence spectra of the defects studied here. Finally, we find that only by correcting for finite-size effects and extrapolating to the dilute limit can one obtain a good agreement between theory and experiment. Our results provide a detailed validation protocol of first-principles calculations of photoluminescence spectra, necessary both for the interpretation of experiments and for robust predictions of the electronic properties of point defects in semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dissolution of Mg-enriched defects in implanted GaN and increased p-type dopant activation

Annealing Mg-implanted homoepitaxial GaN at temperatures above 1400 °C eliminates the formation of inversion domains and leads to improved dopant activation efficiency. Extended defects, in the form of inversion domains, contain electrically inactive Mg after post-implantation annealing at temperatures as high as 1300 °C (one GPa N 2 overpressure), which results in a low dopant activation efficiency. Triple-axis x-ray data reveal that implant-induced strain is fully relieved after annealing at 1300 °C for 10 min, indicating that strain-inducing point defects formed during implantation have reconfigured and inversion domains are formed. However, annealing at temperatures of 1400–1500 °C (one GPa N 2 overpressure) eliminates the presence of the inversion domains. While residual defects, such as dislocation loops, still exist after annealing at and above 1400 °C, chemical analysis at multiple dislocation loops shows no sign of Mg segregation. Meanwhile, an overall decreasing trend in the dislocation loop density is observed after annealing at the higher temperatures and longer times. Additionally, once inversion domains are formed and the samples are cooled to room temperature, they are shown to dissolve with subsequent annealing above 1400 °C. While such defects have been observed before, the important finding that such defects can be dissolved with a short, higher temperature step is key. Earlier work [Breckenridge et al., J. Appl. Phys. Lett. 118, 022101 (2021)] addressing electrical measurements of these types of samples showed that annealing at 1400 °C leads to a dopant activation efficiency that is an order of magnitude higher than that observed at 1300 °C. In conclusion, this work complements earlier work by identifying the inversion domains, which incorporate Mg, and points to the benefits, in terms of defect density and p-type dopant activation, of using higher temperature (>1400 °C) annealing cycles to activate Mg in GaN, even if the Mg-containing inversion domains had been formed during lower temperature annealing.

36 MATERIALS SCIENCE↗