Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Y”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Epitaxial (Al x Ga 1-x-y In y ) 2 O 3 Alloys Lattice Matched to Monoclinic Ga 2 O 3 Substrates

We have epitaxially stabilized a series of monoclinic (Al x Ga 1-x-y In y ) 2 O 3 alloys by careful choice of molecular beam epitaxy growth conditions, which balance alloy growth with suboxide desorption. The films are pseudomorphic to (010) β-Ga 2 O 3 substrates at thicknesses up to 150 nm with compositions ranging from (Al 0.01 Ga 0.83 In 0.16 ) 2 O 3 to (Al 0.24 Ga 0.75 In 0.03 ) 2 O 3 . The absorption edge shifts from approximately 4.62-5.14 eV with coincidently increasing Al and decreasing In mole fractions. J-V measurements reveal an increase in resistivity over four orders of magnitude with a maximum value of 4.2 x 10 5 Ω-cm for (Al 0.17 Ga 0.76 In 0.07 ) 2 O 3 , which has nearly identical lattice parameters (both in-plane and out-of-plane) to the underlying β-Ga 2 O 3 . Scanning transmission electron microscopy of this sample reveals a mostly uniform and single crystalline film, though we identify areas of non-uniform In incorporation and some γ-phase inclusions. This work demonstrates the feasibility of thick layers lattice-matched to β-Ga 2 O 3 with increased bandgap compared to phase-separation limited (Al,Ga) 2 O 3 . These alloys can enable higher bandgap epitaxial dielectrics and high sheet charge density transistors by increasing the conduction band offset with respect to β-Ga 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Optical characterization of deep-level defects in n-type Al x In y Ga 1- x - y P for the development of solid-state photomultiplier analogs

Characterizing intrinsic defects is an essential step in evaluating materials for novel optoelectronic device applications. For photomultipliers, suppressing dark currents is critical, but a tradeoff is present between maximizing the band gap while remaining sensitive to the wavelength of interest and minimizing the incorporation of fresh defects by growing not-yet-optimized alloys. We present a series of capacitance-based measurements, including deep-level optical spectroscopy, steady-state photocapacitance, and illuminated capacitance-voltage, on photodiodes with lightly n-type Al x In y Ga 1−x−y P absorber regions. Several deep levels are identified, including one near the midgap. Although the inclusion of aluminum increases each trap density by approximately 10×, the hole capture cross-section also appears to decrease, suggesting that Shockley–Read–Hall dark currents may be suppressed. These materials may be good candidates for the development into silicon photomultiplier analogs with a wider bandgap for scintillator applications.

III–V↗
DOE OSTI2022

Correlating electronic properties with M-site composition in solid solution Ti y Nb 2- y CT x MXenes

High electrical conductivity is desired in MXene films for applications such as electromagnetic interference shielding, antennas, and electrodes for electrochemical energy storage and conversion applications. Due to the acid etching-based synthesis method, it is challenging to deconvolute the relative importance that factors such as chemical composition and flake size contribute to resistivity. To understand the intrinsic and extrinsic contributions to the macroscopic electronic transport properties, a systematic study controlling compositional and structural parameters was conducted with eight solid solutions in the Ti y Nb 2-y CT x system. Here, in particular, we investigated the different roles played by metal (M)-site composition, flake size, and d-spacing on macroscopic transport. Hard x-ray photoemission spectroscopy and spectroscopic ellipsometry revealed changes to electronic structure induced by the M-site alloying. Consistent with the spectroscopic results, the low- and room-temperature conductivities and effective carrier mobility are correlated with the Ti content, while the impact of flake size and d-spacing is most prominent in low-temperature transport. The results provide guidance for designing and engineering MXenes with a wide range of conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sr 1-x Ca x Fe 1-y Co y O 3-δ as facile and tunable oxygen sorbents for chemical looping air separation

Abstract Chemical looping air separation (CLAS) is a promising technology for oxygen generation with high efficiency. The key challenge for CLAS is to design robust oxygen sorbents with suitable redox properties and fast redox kinetics. In this work, perovskite-structured Sr 1-x Ca x Fe 1-y Co y O 3 oxygen sorbents were investigated and demonstrated for oxygen production with tunable redox properties, high redox rate, and excellent thermal/steam stability. Cobalt doping at B site was found to be highly effective, 33% improvement in oxygen productivity was observed at 500 °C. Moreover, it stabilizes the perovskite structure and prevents phase segregation under pressure swing conditions in the presence of steam. Scalable synthesis of Sr 0.8 Ca 0.2 Fe 0.4 Co 0.6 O 3 oxygen sorbents was carried out through solid state reaction, co-precipitation, and sol-gel methods. Both co-precipitation and sol-gel methods are capable of producing Sr 0.8 Ca 0.2 Fe 0.4 Co 0.6 O 3 sorbents with satisfactory phase purity, high oxygen capacity, and fast redox kinetics. Large scale evaluation of Sr 0.8 Ca 0.2 Fe 0.4 Co 0.6 O 3 , using an automated CLAS testbed with over 300 g sorbent loading, further demonstrated the effectiveness of the oxygen sorbent to produce 95% pure O 2 with a satisfactory productivity of 0.04 g O2 g sorbent −1 h −1 at 600 °C.

25 ENERGY STORAGE↗
DOE OSTI2021

Relationship of Chemical Composition and Moisture Sensitivity in LiNi x Mn y Co 1-x-y O 2 for Lithium-Ion Batteries

Chemical composition–moisture sensitivity relationship of LiNi x Mn y Co 1-x-y O 2 (NMC) cathode materials was investigated by exploring crystal structures, surface properties, and electrochemical performance behaviors of various commercial NMC powders: LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NMC111), LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622), and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811). The NMC powders were stored in different moisture conditions: moisture-free, humidified air, or immersed in water. Rietveld refinement analysis of X-ray diffraction (XRD) data and scanning electron microscopy (SEM) were used to characterize the crystal structure changes and the evolution of particle surfaces morphologies. The effect of moisture contamination on the electrochemical properties of NMC cathodes was studied by galvanostatic cycling and electrochemical impedance spectroscopy (EIS). The moisture contamination resulted in either structural disorder or unwanted surficial deposition products, which increased a charge-transfer impedance and consequent performance degradation of battery cells. The results showed that NMC’s moisture vulnerability increased with Ni content (x) despite protective coatings on commercial particles, which stressed the necessity of alternative surface passivation strategies of Ni-rich NMC for broad applications such as electric vehicles and electrified aircraft propulsion.

25 ENERGY STORAGE↗
DOE OSTI2023

Degradation in Ni-Rich LiNi 1– x – y Mn x Co y O 2 /Graphite Batteries: Impact of Charge Voltage and Ni Content

Ni-rich LiNi 1– x–y Mn x CoyO 2 (NMC) materials are attractive as cathodes for Li-ion batteries due to their high energy density and low Co content. However, these materials may display poor electrochemical reversibility relating to structural and interfacial instabilities. The influence of Ni content and level of delithiation during charge on degradation mechanisms and relevance to electrochemical cycling behavior are probed for LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode materials in a full cell configuration under two upper voltage limits (4.1 and 4.3 V). The combined use of dQ/dV analysis of electrochemical voltage profiles, operando XRD, and postcycling scanning electron microscopy (SEM) measurements indicates that a major contributor to capacity fade is the large anisotropic volume change from an H2 $\leftrightarrows$ H3 phase transition and associated mechanical degradation particularly for NMC811. Notably, transition metal dissolution and deposition on the negative electrode are found to correlate with the structural changes occurring in the cathode under high voltage charge. X-ray photoelectron spectroscopy (XPS) analyses of the cycled cathodes reveal a more organic-rich cathode–electrolyte interphase (CEI) when cycling to 4.3 V with lower relative amounts of LiF. Surface reconstruction is not a significant factor under these cycling conditions as determined by soft X-ray absorption spectroscopy (sXAS) analysis. The results emphasize the opportunity to match the electrochemical test parameters with the specific NMC active material to mitigate degradation and extend cycle life.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cascade Reaction of Ethanol to Butadiene over Ag-Promoted, Silica- or Zeolite-Supported Ta, Y, Pr, or La Oxide Catalysts

Ethanol converts to 1,3-butadiene in the presence of suitable multifunctional catalysts. In this work, Lewis acid cations Ta, Y, Pr, and La were dispersed on amorphous silica or beta zeolite, and after physically mixing with silica-supported Ag nanoparticles, were tested in the cascade reaction of ethanol to butadiene at 573 K. The Lewis acid catalysts were characterized by X-ray fluorescence, N 2 physisorption, scanning transmission electron microscopy (STEM), X-ray diffraction, diffuse reflectance (DR) UV-Vis and X-ray photoelectron spectroscopy. High-resolution STEM images confirmed the small oxide cluster size on the silica support. Results from DR UV-Vis spectroscopy showed zeolite-supported Ta and Pr catalysts had a smaller metal oxide cluster size, relative to their SiO 2 counterparts. X-ray photoelectron spectroscopy confirmed the oxidation state of the cations supported on the zeolite remained the same as that of their SiO 2 -supported analogues. The selectivity of the C 4 coupling products toward butadiene relative to butanol correlated with acid strength of the Lewis acid cations, as evaluated by the 2-propanol decomposition reaction to propene and acetone, with Ta being the most selective. In conclusion, the rate of C-C coupling over the zeolite-supported cations was enhanced by an order of magnitude compared to those cations supported on amorphous SiO 2 .

C-C bond formation↗
DOE OSTI2021

Growth of Cd 0.9 Zn 0.1 Te 1-y Se y Single Crystals for Room Temperature Gamma-Ray Detection

Quaternary Cd 0.9 Zn 0.1 Te 1-y Sey (CZTS) single crystals, a novel room-temperature nuclear radiation detector semiconductor material, have been grown using a modified vertical Bridgman method (VBM) and a travelling heater method (THM). The percentage concentration of selenium in the VBM-grown crystal was 3% and that in the THM-grown crystal was 2%. While the THM Frisch collar detector (4.4 × 4.4 × 10.7 mm 3 ) produced a highly resolved pulse height spectra (PHS) with a resolution of ~1.06% for 662-keV gamma rays without any correction, the VBM-grown detector (10 × 10 × 2 mm 3 ) offered a high energy resolution of ~2% after application of a digital biparametric correction. The high-resolution performance of these detectors has been attributed to the addition of Se in the Cd 0.9 Zn 0.1 Te (CZT) matrix. Ab-initio calculations based on density functional theory (DFT) also confirmed that the addition of Se in the CZT matrix helps to reduce the formation of TeCd and the TeZn anti-sites. The VBM-grown crystals were characterized using powder x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS). While XRD results revealed sharp diffraction peaks confirming the crystalline nature of the grown crystal, the EDS results confirmed the targeted stoichiometry of the elemental composition. The bulk resistivity of the grown crystal was calculated to be ~3 × 10 10 Ω-cm from current-voltage characteristics recorded at room temperature in a planar configuration, ensuring that the grown CZTS crystals have low dark current as required for detector-grade crystals.

42 ENGINEERING↗
DOE OSTI2023

Origin of Rapid Delithiation In Secondary Particles Of LiNi 0.8 Co 0.15 Al 0.05 O 2 and LiNi y Mn z Co 1− y − z O 2 Cathodes

Abstract Most research on the electrochemical dynamics in materials for high‐energy Li‐ion batteries has focused on the global behavior of the electrode. This approach is susceptible to misleading analyses resulting from idiosyncratic kinetic conditions, such as surface impurities inducing an apparent two‐phase transformation within LiNi 0.8 Co 0.15 Al 0.05 O 2 . Here, nano‐focused X‐ray probes are used to measure delithiation operando at the scale of secondary particle agglomerates in layered cathode materials during charge. After an initial latent phase, individual secondary particles undergo rapid, stochastic, and largely uniform delithiation, which is in contrast with the gradual increase in cell potential. This behavior reproduces across several layered oxides. Operando X‐ray microdiffraction (‐XRD) leverages the relationship between Li content and lattice parameter to further reveal that rate acceleration occurs between Li‐site fraction ( x Li ) ≈0.9 and ≈0.5 for LiNi 0.8 Co 0.15 Al 0.05 O 2 . Physics‐based modeling shows that, to reproduce the experimental results, the exchange current density ( i 0 ) must depend on x Li , and that i 0 should increase rapidly over three orders of magnitude at the transition point. The specifics and implications of this jump in i 0 are crucial to understanding the charge‐storage reaction of Li‐ion battery cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Ag Alloying in Cu 2– y Ag y Ba(Ge,Sn)Se 4 Films and Photovoltaic Devices

Trigonal Cu 2 BaGe 1–x Sn x Se 4 (CBGTSe) has recently gained interest as a potential photovoltaic absorber to target mitigation of antisite defect formation in Cu 2 ZnSn(S,Se) 4 . This study examines partial substitution of Cu by Ag as a potential approach to tune the properties of Ag-incorporated CBGTSe in the following aspects: 1) phase stability and crystal structure as a function of Ag content; 2) film morphology and grain structure; 3) charge carrier properties; 4) band positions; and 5) charge carrier kinetics and recombination. Up to 20% of Cu can be substituted by Ag in CBGTSe, while above 20% a phase mixture appears. Increasing Ag content induces larger average grain size and reduced hole carrier densities. In contrast, photoelectron spectroscopy and photoluminescence measurements reveal negligible impact of Ag substitution on ionization potential (≈5.4 eV) and electron affinity (≈3.7 eV). Also, Ag content offers negligible impact on carrier lifetimes (few ns). Consistent with these fundamental properties, solar cells based on two different Ag/(Ag + Cu) ratios (≈0% and ≈20%) show comparable power conversion efficiencies (≈2.7–2.8%). Finally, these results indicate that CBGTSe films and solar cells may be less sensitive to Ag substitution compared to Cu 2 ZnSn(S,Se) 4 , at least at the current level of absorber and device optimization.

14 SOLAR ENERGY↗
DOE OSTI2025

cymyc: $\underline{C}$alabi-$\underline{Y}$au $\underline{M}$etrics, $\underline{Y}$ukawas, and $\underline{C}$urvature

We introduce cymyc, a high-performance Python library for numerical investigation of the geometry of a large class of string compactification manifolds and their associated moduli spaces. We develop a well-defined geometric ansatz to numerically model tensor fields of arbitrary degree on a large class of Calabi-Yau manifolds. cymyc includes a machine learning component which incorporates this ansatz to model tensor fields of interest on these spaces by finding an approximate solution to the system of partial differential equations they should satisfy.

differential and algebraic geometry↗