Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBLE SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Speciation of technetium in carbonate media under helium ions and γ radiation

Technetium carbonates complexes produced by chemical, electrochemical and radiolytic methods have been studied by UV-Visible, X-ray Absorption Fine Structure (XAFS) and Density Functional Theory methods. The (NH 4 ) 2 TcCl 6 salt was dissolved in 2 M KHCO 3 . The resulting purple solution was analyzed by XAFS and UV-Visible spectroscopy. The UV-Visible spectra exhibits a band centered at 515 nm. The XAFS results were consistent with the presence of polymeric species containing the [Tc 2 (μ-O) 2 ] 4+ core coordinated to carbonate ligand. Concerning the electrochemical methods, the pertechnetate anion was electrochemically reduced in concentrated carbonate solution [(CO 3 2- )=5 M and (HCO 3 - )=0.5 M]. For the radiolytic reduction, the speciation of Tc under Helium ions particle beam and γ radiation was examined by UV-Visible and XAFS spectroscopy in high concentrated carbonate media. In concentrated carbonate solutions, pertechnetate as Tc(VII), was not reduced under irradiation due to the formation of carbonate radical which is a strong oxidant. Then, the solution proposed was the addition of formate to the solution which can scavenge hydroxyl radical 10 times faster than carbonate and prevent re-oxidation of reduced technetium. The XANES and EXAFS spectroscopies, approved by theoretical methods, revealed that the final product of the radiolytic reduction of pertechnetate is in the +IV oxidation state. The final structure of the reduced product by He 2+ radiolysis was the same as electrochemical reduction. From this complex determination and evolution vs. the dose, this study is reporting the solubility of the Tc(IV) complex.

Ghalei, Mohammad↗

Rocket-ultraviolet spectra of kappa, lambda, tau, and upsilon Scorpii

The present work describes high- and low-resolution rocket-ultraviolet spectra of kappa, lambda, tau, and upsilon Scorpii obtained in the range from 1160 to 1880 A. The Si IV resonance lines in tau Sco show asymmetries indicating outward mass motions of up to about 400 km/sec. The suitability of some of the lines observed for indication of luminosity or temperature is discussed. It is pointed out that the intrinsic strength and large changes of the lines of Si III and C IV may permit a more accurate spectral classification of stars between B0 and B3 than has been demonstrated in this same spectral type region using visible spectra.

Jenkins, E. B.↗

Light‐Gated Synthetic Protocells for Plasmon‐Enhanced Chemiosmotic Gradient Generation and ATP Synthesis

Abstract Herein, we present a light‐gated protocell model made of plasmonic colloidal capsules (CCs) assembled with bacteriorhodopsin for converting solar energy into electrochemical gradients to drive the synthesis of energy‐storage molecules. This synthetic protocell incorporated an important intrinsic property of noble metal colloidal particles, namely, plasmonic resonance. In particular, the near‐field coupling between adjacent metal nanoparticles gave rise to strongly localized electric fields and resulted in a broad absorption in the whole visible spectra, which in turn promoted the flux of photons to bacteriorhodopsin and accelerated the proton pumping kinetics. The cell‐like potential of this design was further demonstrated by leveraging the outward pumped protons as “chemical signals” for triggering ATP biosynthesis in a coexistent synthetic protocell population. Hereby, we lay the ground work for the engineering of colloidal supraparticle‐based synthetic protocells with higher‐order functionalities.

Chen, Zhaowei↗

Light-Gated Synthetic Protocells for Plasmon-Enhanced Chemiosmotic Gradient Generation and ATP Synthesis

We present a light-gated protocell model made of plasmonic colloidal capsules (CCs) assembled with bacteriorhodopsin for converting solar energy into electrochemical gradients to drive the synthesis of energy-storage molecules. This synthetic protocell incorporated an important intrinsic property of noble metal colloidal particles, namely, plasmonic resonance. In particular, the near-field coupling between adjacent metal nanoparticles gave rise to strongly localized electric fields and resulted in a broad absorption in the whole visible spectra, which in turn promoted the flux of photons to bacteriorhodopsin and accelerated the proton pumping kinetics. The cell-like potential of this design was further demonstrated by leveraging the outward pumped protons as “chemical signals” for triggering ATP biosynthesis in a coexistent synthetic protocell population. Hereby, we lay the ground work for the engineering of colloidal supraparticle-based synthetic protocells with higher-order functionalities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arabic Gum as Bio-Synthesizer for Ag–Au Bimetallic Nanocomposite Using Seed-Mediated Growth Technique and Its Biological Efficacy

Bio-synthesis of nanostructures is an ever green approach; therefore, the current work attempts to use Arabic gum as bio-synthesizer for manufacturing Ag–Au bimetallic nanocomposite, using seed-mediated growth technique. The relevance of the as-used natural gums for manufacturing of Ag–Au nanocomposite in quite simple, energy saving and cost effective methodology, has been successfully approved. Arabic gum acted concurrently as a reducer for metal ions to nano-sized structures and crystal growth modifier of the so-generated nanocomposite. Monitoring of interchanging in size distribution of the as-produced bimetallic nanocomposite by the effect of the gum concentration, concentration of nanometals precursors, their addition sequencing in reaction liquor, and reaction temperature, was illustrated and well characterized. UV–Visible spectra showed that the characteristic surface plasmon resonance peak for Ag–Au bimetallic nanocomposite was observed at 480–495 nm and XRD patterns confirmed the preparation of bimetallic nanostructures. According to zetasizer analyses and TEM micrographs, small sized (3.1 nm) Ag–Au bimetallic nanocomposite with narrow size distribution (1–7 nm) were obtained. The all prepared bimetallic nanocomposite showed good stability with polydispersity index ranged in 0.203–0.530. The mechanism of nanostructures’ generation was suggested and approved using FT-IR, 1HNMR and 13CNMR spectra. The prepared Ag–Au bimetallic nanocomposites showed excellent antibacterial activity against both of gram + ve and gram − ve strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microfluidic Fabrication of Nanoparticles Based on Ethyl Acrylate-Functionalized Chitosan for Adsorption of Methylene Blue from Aqueous Solutions

The adsorption of nanoparticle (NP)-based adsorbents especially those made of polymers to remove dyes as toxic substances from pollutants is yet remained as a critical issue. The objective of this work was to prepare microfluidic (MF) fabrication of NPs based on ethyl acrylate (EA)-functionalized chitosan (CS) for methylene blue (MB) dye removal from aqueous solutions. For this purpose, a series of experiments such as FTIR, SEM alongside DLS, and UV–vis spectrophotometry were carried out to investigate the physicochemical properties of the samples. The FTIR spectra showed that the amine (–NH{sub 2}) and hydroxyl (–OH) groups on CS structure were replaced with EA, appropriately. The SEM and DLS results depicted that EA-functionalized CS NPs fabricated using MF technique had uniform shapes, and the diameters as small as 70 nm compared to those samples produced via bulk mixing (BM) method (~ 300 nm). Moreover, the surface charge of MF-assisted CS NPs after functionalization exhibited the lower zeta potential value (~ + 11) than that of samples based on BM (~ + 14) due to occurring the laminar flow through the micro-channels embedded in the MF chip, leading to an increase in the MB adsorption. Subsequently, at the optimized amounts of the dye concentration (89.12 mg L{sup −1}), the adsorbent concentration (1.38 g L{sup −1}), and pH (10.58) by means of Box-Behnken design (BBD) method, the maximum percentage of MB removal by the use of MF-fabricated EA-functionalized CS NPs was 98.4%. By fitting the obtained adsorption data to the isotherm models such as Lagmuir, Freundlich, and Temkin, it has been found that the adsorption mechanism followed the Langmuir model (maximum capacity of the adsorption 384.61 mg/g), which assumed a monolayer coverage of MB molecules as adsorbates over a homogeneous adsorbent surface.

36 MATERIALS SCIENCE↗

A Facile and Environmentally Friendly One-Pot Synthesis of Pt Surface-Enriched Pt-Pd(x)/C Catalyst for Oxygen Reduction

Platinum surface-enriched bimetallic PtPd nanoparticles are synthesized via a facile and eco-friendly approach. Significantly different formation processes of single Pt, Pd, and bimetallic PtPd nanoparticles under various conditions have been monitored by UV-visible spectra. The size of the bimetallic Pt-Pd nanoparticles has been found to be significantly affected by the pH of the starting precursor solutions. Uniform bimetallic Pt-Pd nanoparticles with an average diameter of ~3 nm are formed in the basic solutions; however, the particle size can be as large as 11 nm when synthesized in acidic media. The detailed morphology, composition, and structure of the carbon-supported bimetallic Pt-Pd electrocatalysts have been extensively characterized and correlated with their electrochemical properties as evaluated using cyclic voltammetry and single-cell test. The formation of Pt surface-enriched Pt-Pd bimetallic nanoparticles has been confirmed by X-ray photoelectron spectroscopy and has been interpreted by the exclusively reduced Pt around the newly formed Pd nuclei due to the catalytic action of Pd, which in turn curbs the unfavorable growth of the bimetallic nanoparticles. The electrochemical tests indicate that the optimized Pt-Pd/C with reduced cost exhibits competitive catalytic performance toward oxygen reduction reaction and superior tolerance to methanol over the state-of-the-art Pt/C.

Chemistry↗

Coiled-coil forming peptides for the induction of silver nanoparticles

Biopolymers with defined sequence patterns offer an attractive alternative for the formation of silver nanoparticle (AgNP). A set of coiled-coil dimer forming peptides was tested for their AgNP formation ability. Seventeen of those peptides mediated the formation of AgNPs in aqueous solution at neutral pH, while the formation of a coiled-coil dimer inhibited the nanoparticle generation. A QSAR regression model on the relationship between sequence and function suggests that in this peptide type the patterns KXQQ and KXEE are favorable, whereas Ala residues appear to have an inhibitory effect. UV–VIS spectra of the obtained nanoparticles gave a peak at around 420 nm, typical for AgNPs in the size range around 40 nm, which was confirmed by dynamic light scattering and transmission electron microscopy. Peptide-induced AgNPs exhibited good antibacterial activity, even after a 15 min contact time, while they had low toxicity to human cells at the same concentrations. These results show that our designed peptides generate AgNPs with antibacterial activity at mild conditions and might be used for antibacterial coatings. - Highlights: • 17 of the 30 tested coiled-coil forming peptides induce AgNP formation. • Coiled-coil dimer formation suppresses AgNP generation of individual peptides. • Size of the peptide-induced silver nanoparticles is around 40 nm. • QSAR analysis points to the importance of KXQQ and KXEE motifs for AgNP generation. • Peptide-induced silver nanoparticles exhibit antibacterial activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical and dynamical characterization of hyperbolic comet C/2017 U7 (PANSTARRS)

Here we present here a dynamical and observational study of the comet C/2017 U7 (PANSTARRS). This comet was discovered in 2017 and found to have a hyperbolic orbit. Our dynamical analysis shows that the object has probably originated in the Oort cloud, however an interstellar origin cannot be discarded. The observations were obtained in 2018 and 2019 using the Goodman High Throughput Spectrograph (GHTS) at the SOAR telescope. We obtained visible spectra covering the wavelength range of 0.5 - 0.9 μm and also images in the SDSS filters system. Both the low-resolution reflectance spectrum and the reflectance spectra derived from the SDSS filters show an atypical band at ~ 0.595 μm. We conducted a comparative study of the colors and reflectance spectra of different small body populations (e.g., comets, Centaurs, and trans-Neptunian objects or TNOs) from the literature and concluded that the spectra and the colors of this comet are atypical, showing only some overlap with those of some known members of the TNOs and Centaurs, within the large uncertainties of the measurements of those populations. It is found that the feature and overall spectral shape can be reproduced by laboratory spectra of kerite, a template for aliphatic-rich hydrocarbons that has been previously identified in NIR cometary spectra absorptions. It is tentatively proposed that the unusual spectral shape is the result of a particle size distribution of dust grains in the coma or on the surface that has arisen due to a low grain ejection velocity from the surface and large nucleus size.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasma-parameter dependence of ro-vibrational temperatures for H 2 in LHD divertor

We analyzed a thousand visible spectra of Fulcher-α band measured for divertor plasmas in Large Helical Device. With a coronal model and Bayesian inference, the population distribution of hydrogen molecule in the electronic ground state was estimated. The non-thermal population distribution was recovered with a two-temperature model, which has two sets of rotational and vibrational temperatures, as well as their mixture coefficient. The lower rotational temperature significantly changes according to the plasma parameters. Its nearly linear dependence on the electron density was found, which is consistent with previous works. The lower vibrational temperature also shows a small density dependence, as reported by a previous work. On the other hand, the higher rotational and vibrational temperatures as well as the mixture coefficient only show slight changes over the broad range of plasma parameters. These population parameters show a significant correlation; with higher electron density, all the temperatures and the fraction of the higher-temperature component increase simultaneously. In conclusion, this suggests that the electron impact plays an important role to determine the population distribution.

42 ENGINEERING↗

Structural, magnetic and optical properties of ZnO nanostructures converted from ZnS nanoparticles

Graphical abstract: The phase conversion of ZnS to highly crystalline hexagonal ZnO was done by heat treatment. - Highlights: • Phase change of cubic ZnS to hexagonal ZnO via heat treatment. • Band gap was found to decrease with increasing calcinations temperature. • ZnO samples have higher magnetic moment than ZnS. • Blocking Temperature of the samples is well above room temperature. • Maximum negative%MR with saturation value ∼38% was found for sample calcined at 600° C. - Abstract: The present work concentrates on the synthesis of cubic ZnS and hexagonal ZnO semiconducting nanoparticle from same precursor via co-precipitation method. The phase conversion of ZnS to highly crystalline hexagonal ZnO was done by heat treatment. From the analysis of influence of calcination temperature on the structural, optical and vibrational properties of the samples, an optimum temperature was found for the total conversion of ZnS nanoparticles to ZnO. Role of quantum confinement due to finite size is evident from the blue shift of the fundamental absorption in UV–vis spectra only in the ZnS nanoparticles. The semiconducting nature of the prepared samples is confirmed from the UV–vis, PL study and transport study. From the magnetic and transport studies, pure ZnO phase was found to be more prone to magnetic field.

36 MATERIALS SCIENCE↗

Phosphides or nitrides for better NLO properties? A detailed comparative study of alkali metal doped nano-cages

Highlights: • Alkali metal doped boron and aluminum phosphide nano-cages are evaluated for NLO properties. • The NLO response of phosphide nano-cages is compared with nitride nano-cages. • Phosphide nano-cages show better NLO properties than the corresponding nitride nano-cages. • Conductivity of doped nano-cages is much higher than pristine nano-cages. • MAl{sub 11}P{sub 12} and MB{sub 11}P{sub 12} show monotonic increase in hyperpolarizability with size of alkali metal. - Abstract: Phosphide nano-cages of MX{sub 12}P{sub 11} and MX{sub 11}P{sub 12} (where X = B or Al, M = Li, Na, K) are investigated theoretically for geometric, electronic and nonlinear optical (NLO) properties. Alkali metal is doped by replacing (a) aluminum or boron atom and (b) phosphorus atom. Alkali metal doping can remarkably alter the electronic and NLO properties of the nano-cages, regardless of doping site. HOMO-LUMO gap is decreased whereas first hyperpolarizability is enhanced significantly in doped AlP and BP nano-cages. PDOS (partial density of states) analysis suggests that diffuse excess electrons from alkali metal play important role in boosting NLO properties of phosphide nano-cages. TD-DFT calculations are performed to study the effect of alkali metal doping on absorption spectra. Red shift is observed in the UV–vis spectra of all considered nano-cages. Comparison of phosphide nano-cages with nitride nano-cages indicated that doping nitride nano-cages with alkali metal leads to greater hyperpolarizability and NLO response than doping phosphide nano-cages.

36 MATERIALS SCIENCE↗

Growth and characterization of ZnO nanostructure on TiO{sub 2}-ZnO films as a light scattering layer for dye sensitized solar cells

Graphical abstract: Pictorial representation of (a,b) electron transport path in nanoparticles and nanorods (red arrow marks), and (c,d) light scattering effect on TiO2-ZnO film without and with light scattering layer (blue, red and green arrow marks are incident, transmit and scattering light, respectively). - Abstract: In the present work, we studied the effect of light scattering layer on the performance of DSSCs. TiO{sub 2}-ZnO thin films were coated onto FTO glass substrate by spin coating technique as a photoanode for DSSCs. ZnO nanorods with flower structures were potentiostatically grown on TiO{sub 2}-ZnO films at various potentials from −1.1 to 1–1.3 V as a light scattering layer. XRD patterns reveal that as the deposition potentials increase the growth of ZnO nanorods increases along with (101) plane orientation. FE-SEM images display agglomerated grains and nanorods with flower structures for TiO{sub 2}-ZnO film, and ZnO has grown on TiO{sub 2}-ZnO film at a deposition potential of −1.3 V. UV–vis spectra confirm the TiO{sub 2}-ZnO with ZnO nanorods having a higher light scattering effect, absorbance and dye loading than that of another film. The efficiency of the DSSCs consisting of without and with scattering layer is estimated to be 0.79 and 1.81%, respectively.

36 MATERIALS SCIENCE↗

Nucleophilic substitution between polysulfides and binders unexpectedly stabilizing lithium sulfur battery

Polysulfide shuttling has been the primary cause of failure in lithium-sulfur (Li-S) battery cycling. In this paper, we demonstrate an nucleophilic substitution reaction between polysulfides and binder functional groups can unexpectedly immobilizes the polysulfides. The substitution reaction is verified by UV–visible spectra and X-ray photoelectron spectra. The immobilization of polysulfide is in situ monitored by synchrotron based sulfur K-edge X-ray absorption spectra. The resulting electrodes exhibit initial capacity up to 20.4 mAh/cm 2 , corresponding to 1199.1 mAh/g based on a micron-sulfur mass loading of 17.0 mg/cm 2 . The micron size sulfur transformed into nano layer coating on the cathode binder during cycling. Directly usage of nano-size sulfur promotes higher capacity of 33.7 mAh/cm 2 , which is the highest areal capacity reported in Li-S battery. Finally, this enhance performance is due to the reduced shuttle effect by covalently binding of the polysulfide with the polymer binder.

25 ENERGY STORAGE↗

Enhancing f -Element Separations with ADAAM-EH: The Impact of Phase Modifiers and a DGA Aqueous Complexant

Recent investigations have used a 2-ethylhexyl diamide amine (ADAAM-EH) for Am/Cm separations in combination with N,N,N ',N '-tetraethyldiglycolamide as an aqueous complexant to achieve an unprecedented separation factor of 41. The aim of this research effort is to understand the speciation of trivalent lanthanide (Ln) and actinide (An) ions in the organic phase of an ADAAM-EH extraction system, both with and without phase modifiers (PM) (1-octanol and tri-n-butyl phosphate (TBP)). Leveraging spectroscopic techniques in combination with distribution ratio measurements provides an understanding of organic phase f-element ligand complexation. In the absence of PM, Ln is extracted in a stoichiometric 1:1 [M(ADAAM-EH) 1 (NO 3 ) x (H 2 O) 1 ](NO 3 ) 3-x complex. The addition of 1-octanol at 20 vol % results in multiple species present. One of the species is the same as the no PM case, and the other species results in an increased -OH coordination to the inner sphere, potentially displacing some NO 3 . In the case of TBP, increasing concentration results in additional red-shifted bands in the UV-visible spectra, suggesting the complexation of additional ligands of either ADAAM-EH or TBP. Finally, the new system knowledge obtained by and spectroscopic experiments will provide benchmarking information for computational studies of the inner- and outer-sphere coordination environments of f-element cations and insights into ADAAM-EH adduct formation with PM, like 1-octanol and TBP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, Magnetic, and Optical Properties of A 3 V 4 (PO 4 ) 6 (A = Mg, Mn, Fe, Co, Ni)

Combined synchrotron and neutron powder diffraction indicates that A 3 V 4 (PO 4 ) 6 (A = Mg, Mn, Fe, Co, Ni) compounds crystallize with triclinic $P\bar{1}$ symmetry. Lattice parameters expand as expected with successive increases in the ionic radius of the A 2+ ion. Cation disorder on the octahedral sites increases as the ionic radii of A 2+ ion decreases. Direct-current magnetic susceptibility measurements indicate that all compounds with magnetic A 2+ ions order anti-ferromagnetically with transition temperatures ranging from 12 to 15 K. Effective magnetic moments for A 3 V 4 (PO 4 ) 6 (A = Mg, Mn, Fe, Co, Ni) are 5.16, 11.04, 10.08, 9.76, and 7.96 μ B per formula unit, respectively, in line with calculated values for high-spin transition metal ions. With the exception of Co 3 V 4 (PO 4 ) 6 the ultraviolet–visible spectra are dominated by d–d transitions of the V 3+ ions. Here, the striking emerald green color of Co 3 V 4 (PO 4 ) 6 arises from the combined effects of d–d transitions involving both V 3+ and Co 2+ .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of Graphene Quantum Dots with Oligothiophene: A Comprehensive Theoretical Study

Graphene/polythiophene composites are widely used in a variety of optoelectronic devices and applications, e.g., as electrode materials in capacitors and solar cells, but the detailed molecular-level relationship between their structural and electronic properties is not well understood. We present a density functional theory study of these composites using model systems consisting of graphene nanosheets and nanoribbons sandwiched between oligothiophenes (up to 13 monomers in length). These systems are investigated by computing optical band gaps, UV–visible spectra, densities of states, and by analyzing noncovalent interactions in terms of the reduced density gradient. Frontier molecular orbital analysis reveals a significant decrease in the optical band gap upon increasing the concentration of graphene, which can be tuned by adjusting the proportion of graphene using larger nanoribbons. This finding has implications for device design in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

C–H Bond Activation via U(II) in the Reduction of Heteroleptic Bis(trimethylsilyl)amide U(III) Complexes

Reduction of (C 5 Me 5 ) 2 U III (NR 2 ) and (C 5 Me 5 )U III (NR 2 ) 2 (R = SiMe 3 ) with potassium graphite in the presence of 2.2.2-cryptand (crypt) generates dark solutions that have UV-visible spectra consistent with time-dependent density functional theory (TDDFT) calculations on the U(II) products, [(C 5 Me 5 ) 2 U II (NR 2 )] - and [(C 5 Me 5 )U II (NR 2 ) 2 ] - . However, the solutions quickly change color and form the U(III) C–H bond activation products [K(crypt)][(C 5 Me 5 ) 2 U III (CH 2 SiMe 2 NSiMe 3 –κC,κN)], 1, and [K(crypt)][(C 5 Me 5 )U III (NR 2 )(CH 2 SiMe 2 NSiMe 3 –κC,κN)], 2, that were identified by X-ray crystallography. DFT calculations on the putative [(C 5 Me 5 ) 2 U II (NR 2 )] - and [(C 5 Me 5 )U II (NR 2 ) 2 ] - complexes revealed 5f 3 6d 1 ground state electron configurations as previously found in isolable [(C 5 H 4 SiMe 3 ) 3 U II ] - , which indicated that these low symmetry heteroleptic complexes are reasonable precursors for new U(II) complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗