SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A vector analysis technique was adopted to test the standard reflectance model. A computational model was developed to determine the components of the observed spectra and an estimate of the illuminant was obtained without using a reference white standard. The accuracy of the standard model is evaluated.
The kinematic and trajectory planning is presented for a 6 DOF end-effector whose design was based on the Stewart Platform mechanism. The end-effector was used as a testbed for studying robotic assembly of NASA hardware with passive compliance. Vector analysis was employed to derive a closed-form solution for the end-effector inverse kinematic transformation. A computationally efficient numerical solution was obtained for the end-effector forward kinematic transformation using Newton-Raphson method. Three trajectory planning schemes, two for fine motion and one for gross motion, were developed for the end-effector. Experiments conducted to evaluate the performance of the trajectory planning schemes showed excellent tracking quality with minimal errors. Current activities focus on implementing the developed trajectory planning schemes on mating and demating space-rated connectors and using the compliant platform to acquire forces/torques applied on the end-effector during the assembly task.
We report the results of three campaigns in which the horizontal wind vector at cloud altitudes was measured using the holographic, conical-scan lidar HARLIE in its nadir-viewing mode. Measurements were made during the HOLO-1 and -2 tests in Utah and New Hampshire in March and June 1999, respectively, and at the DoE-ARM site in Oklahoma in September/October 2000. A novel algorithm facilitates the wind vector analysis of the HARLIE data. Observed wind velocity and direction were compared with radiosonde records and with other data obtained from video cloud imagery and independent lidar ranging. The results demonstrate good agreement between HARLIE data and the results of other methods. The conically scanning holographic lidar opens up new possibilities for obtaining the vertical profile of horizontal winds.
Strong localized radar echoes have been observed at decimeter wavelengths from the highlands of Venus since the earliest radar maps were obtained over 30 years ago. These echoes are some five to ten times stronger than those from the presumably basaltic rocks seen at lower altitudes elsewhere on Venus. Observations of thermal emission from the visible disk of Venus at wavelengths corresponding to those used in the radar mapping confirm that the regions of high reflectivity also exhibit low emissivity, as expected from considerations of detailed thermodynamic balance. Two possibilities have been put forward to explain this unexpected aspect of the Venus highlands: 1) surface materials of high effective dielectric constant, probably associated with finite electrical conductivity, and 2) volume scattering associated with multiple scattering from a layer of very-low-loss material containing voids and extending down a few hundred wavelengths beneath the surface. Analogs to these two mechanisms are found elsewhere in the solar system, and each is capable of explaining the basic observations. as of the early 1990's. In 1993, however, it became possible to carry out a bistatic observation of the anomalous highland regions using the Magellan spacecraft, then in orbit about Venus. In this experiment the on-board telemetry transmitter was aimed at the planet's surface with its linear S-band polarization vector oriented at 45 deg to the spacecraft-Venus-Earth scattering plane. The pointing of the transmitting antenna was adjusted so that the spacecraft-to-illuminated-surface incidence angle equalled the Earth-to-Venus-surface incidence angle. In this way, the experiment emphasized the specular scattering component. A full Stokes-Vector analysis of the reflected signal as received on Earth was carried out as the illuminated region scanned across the highland regions of Venus. From the observed position angle of the echo, it was possible to calculate the Fresnel reflectivity of a number of regions on Venus, including the high-altitude Maxwell Montes, and to show unequivocally that the complex dielectric constant of that anomalous area was 100 +/- 50i, as compared to 4.0 (real) for the typical lowland area. Thus this experiment was able to rule out definitively an hypothesis of volume scattering as the explanation for the anomalous scattering in the Venus highlands.
A tilted furnished room can induce strong visual reorientation illusions in stationary subjects. Supine subjects may perceive themselves upright when the room is tilted 90 degrees so that the visual polarity axis is kept aligned with the subject. This 'upright illusion' was used to induce roll tilt in a truly horizontal, but perceptually vertical, plane. A semistatic tilt profile was applied, in which the tilt angle gradually changed from 0 degrees to 90 degrees, and vice versa. This method produced larger illusory self-tilt than usually found with static tilt of a visual scene. Ten subjects indicated self-tilt by setting a tactile rod to perceived vertical. Six of them experienced the upright illusion and indicated illusory self-tilt with an average gain of about 0.5. This value is smaller than with true self-tilt (0.8), but comparable to the gain of visually induced self-tilt in erect subjects. Apparently, the contribution of nonvisual cues to gravity was independent of the subject's orientation to gravity itself. It therefore seems that the gain of visually induced self-tilt is smaller because of lacking, rather than conflicting, nonvisual cues. A vector analysis is used to discuss the results in terms of relative sensory weightings.
Modal regulators and deformation trackers are designed for an open-loop fluttering wing model. The regulators are designed with modal coordinate and accelerometer inputs respectively. The modal coordinates are estimated with simulated fiber optics. The robust stability of the closed-loop systems is compared in a structured singular-value vector analysis. Performance is evaluated and compared in a gust alleviation and flutter suppression simulation. For the same wing and flight condition two wing-shape-tracking control architectures are presented, which achieve deformation control at any point on the wing.
The use of an orthogonal set of specially selected Ritz vectors is shown to be very effective in reducing the cost of dynamic analysis by modal superposition. Several mechanical structures are examined, and the Ritz vector approach is compared to the classical eigenvector approach on the basis of cost, accuracy and elapsed analysis (throughput) time. Mathematical proof of the completeness of orthogonal Ritz vectors is provided for the case of a positive definite mass matrix and a symmetric stiffness matrix.
This paper presents a parallel-vector algorithm for sensitivity calculations in linear structural dynamics. The proposed alternative formulation works efficiently with the reduced system of dynamic equations, since it eliminates the need for expensive and complicated based-vector derivatives, which are required in the conventional reduced system formulation. The relationship between the alternative formulation and the conventional reduced system formulation has been established, and it has been proven analytically that the two approaches are identical when all the mode shapes are included. This paper validates the proposed alternative algorithm through numerical experiments, where only a small number of mode shapes are used. In addition, a modified mode acceleration method is presented, thus not only the displacements but also the velocities and accelerations are shown to be improved.
Rocket engine cluster thrust and moment vectors analyzed statistically for thrust misalignment
Thrust vector deflection stability analysis for minimum control requirements of booster vehicles during atmospheric flight
The design of the vector magnetometer selected for analysis is capable of exceeding the required accuracy of 5 gamma per vector field component. The principal elements that assure this performance level are very low power dissipation triaxial feedback coils surrounding ring core flux-gates and temperature control of the critical components of two-loop feedback electronics. An analysis of the calibration problem points to the need for improved test facilities.
A novel algorithm is presented for adaptive learning of an unknown function that separates two regions of a domain.In the context of reliability analysis these two regions represent the failure domain, where a set of constraints or requirements are violated, and a safe domain where they are satisfied. The Limit State Function (LSF) separates these two regions. Evaluating the constraints for a given parameter point requires the evaluation of a computational model that may well be expensive. For this reason we wish to construct a meta-model that can estimate the LSFas accurately as possible, using only a limited amount of training data. This work presents an adaptive strategy employing a Support Vector Machine (SVM) as a meta-model to provide a semi-algebraic approximation of the LSF.We describe an optimization process that is used to select informative parameter points to add to training data at each iteration to improve the accuracy of this approximation. A formulation is introduced for bounding the predictions of the meta-model; in this way we seek to incorporate this aspect of Gaussian Process Models (GPMs) within anSVM meta-model. Finally, we apply our algorithm to two benchmark test cases, demonstrating performance that is comparable with, if not superior, to a standard technique for reliability analysis that employs GPMs
The dynamic solution vectors yielded by the present structure/load dependent-vectors method for large-scale linear structural dynamic analyses involving complex loadings can be used as starting vectors, so that both structure and load characteristics are encompassed by the basis vectors. The method is shown to entail fewer vectors than current alternatives for a given level of accuracy, especially in the cases of structures that have external concentrated masses. Numerical results are presented which illustrate the advantages of this dependent-vectors method relative to other reduction methods.
The dynamic analysis of large space structures is important in order to predict their behavior under operating conditions. Computer models of large space structures are characterized by having a large number of degrees of freedom, and the computational effort required to carry out the analysis is very large. Conventional methods of solution utilize a subset of the eigenvectors of the system, but for systems with many degrees of freedom, the solution of the eigenproblem is in many cases the most costly phase of the analysis. For this reason, alternate solution methods need to be considered. It is important that the method chosen for the analysis be efficient and that accurate results be obtainable. It is important that the method chosen for the analysis be efficient and that accurate results be obtainable. The load dependent Ritz vector method is presented as an alternative to the classical normal mode methods for obtaining dynamic responses of large space structures. A simplified model of a space station is used to compare results. Results show that the load dependent Ritz vector method predicts the dynamic response better than the classical normal mode method. Even though this alternate method is very promising, further studies are necessary to fully understand its attributes and limitations.
A Choleski method used to solve linear systems of equations that arise in large scale structural analyses is described. The method uses a novel variable-band storage scheme and is structured to exploit fast local memory caches while minimizing data access delays between main memory and vector registers. Several parallel implementations of this method are described for the CRAY-2 and CRAY Y-MP computers demonstrating the use of microtasking and autotasking directives. A portable parallel language, FORCE, is also used for two different parallel implementations, demonstrating the use of CRAY macrotasking. Results are presented comparing the matrix factorization times for three representative structural analysis problems from runs made in both dedicated and multi-user modes on both the CRAY-2 and CRAY Y-MP computers. CPU and wall clock timings are given for the various parallel methods and are compared to single processor timings of the same algorithm. Computation rates over 1 GIGAFLOP (1 billion floating point operations per second) on a four processor CRAY-2 and over 2 GIGAFLOPS on an eight processor CRAY Y-MP are demonstrated as measured by wall clock time in a dedicated environment. Reduced wall clock times for the parallel methods relative to the single processor implementation of the same Choleski algorithm are also demonstrated for runs made in multi-user mode.
The Multi-angle Imaging Spectro Radiometer (MISR) is one of a suite of five instruments onboard NASA's Terra EOS satellite, launched in December 1999. Typical satellite imagers view the earth from a single direction, but MISR's cameras image the earth simultaneously from nine different directions in four spectral bands. In this way, MISR provides unique multiangle information about solar radiation scattered from clouds, aerosols and other terrestrial surfaces. One of the primary goals of the MISR mission is to improve our understanding of how clouds and aerosols affect the earth's global energy balance.
A strategy to mitigate the impact of the trajectory design of the Jupiter Icy Moons Orbiter (JIMO) on the attitude control design is described in this paper. This paper shows how the thrust vectoring control torques, i.e. the torques required to steer the vehicle, depend on various parameters (thrust magnitude, thrust pod articulation angles, and thrust moment arms). Rather than using the entire reaction control system (RCS) system to steer the spacecraft, we investigate the potential utilization of only thrust vectoring of the main ion engines for the required attitude control to follow the representative trajectory. This study has identified some segments of the representative trajectory where the required control torque may exceed the designed ion engine capability, and how the proposed mitigation strategy succeeds in reducing the attitude control torques to within the existing capability.
Explore the source record for details and available documents.