Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Upscale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Reservoir-scale model of geologic hydrogen production from serpentinization: Cyclic injection in a dual-permeability fracture-matrix system

Geologic hydrogen (GeoH 2 ) from serpentinization is a promising low-carbon resource, but its reservoir-scale behavior remains poorly understood. We develop a dual-permeability reactive transport model for an injector–producer well pair in ultramafic rock that couples multiphase flow, heat transfer, geochemistry, and porosity–permeability evolution. Here, the model is calibrated to olivine flow-through experiments and upscaled to two-year long simulations with continuous injection and cyclic injection with shut-in-to-injection ratios (SIR = 1, 0.5, 0.1). Olivine reacts along high-flux pathways to form lizardite and magnetite, increasing pH; H 2 (aq) and H 2 (g) peak early and then decline as exsolution and advective export outpace local generation. Continuous injection yields the highest cumulative H 2 but the lowest water-use efficiency (1.138 x 10 –6 mol/kgw). Cyclic injection increases this ratio to 1.35 x 10 –6 , 1.377 x 10 –6 , and 1.182 x 10 –6 mol/kgw for SIR = 1, 0.5, and 0.1, respectively; SIR = 0.5 provides a ~20% improvement over continuous injection and the best compromise for pilot design.

08 HYDROGEN↗
DOE OSTI2024

A non-isothermal breakage-damage model for plastic-bonded granular materials incorporating temperature, pressure, and rate dependencies

Plastic-bonded granular materials (PBM) are widely used in industrial sectors, including building construction, abrasive applications, and defense applications such as plastic-bonded explosives. The mechanical behavior of PBM is highly nonlinear, irreversible, rate dependent, and temperature sensitive governed by various micromechanical attributions such as grain crushing and binder damage. This paper presents a thermodynamically consistent, microstructure-informed constitutive model to capture these characteristic behaviors of PBM. Key features of the model include a breakage internal variable to upscale the grain-scale information to the continuum level and to predict grain size evolution under mechanical loading. In addition, a damage internal state variable is introduced to account for the damage, deterioration, and debonding of the binder matrix upon loading. Temperature is taken as a fundamental external state variable to handle non-isothermal loading paths. The proposed model is able to capture with good accuracy several important aspects of the mechanical properties of PBM, such as pressure-dependent elasticity, pressure-dependent yield strength, brittle-to-ductile transition, temperature dependency, and rate dependency in the post-yielding regime. Furthermore, the model is validated against multiple published datasets obtained from confined and unconfined compression tests, covering various PBM compositions, confining pressures, temperatures, and strain rates.

Breakage↗
DOE OSTI2024

Enhanced joining strength in additive-manufactured polylactic-acid structures fused by embedded heated metallic meshes

Additively manufactured thermoplastic polymers, such as polylactic acid (PLA), hold significant promise for sustainable engineering structures, including wind turbine blades. Upscaling these structures beyond the limitations of 3D printer build volumes is a challenge; fusion joining presents a potential solution. This paper introduces a displacement-controlled resistance welding process for PLA, as an alternative to the typical force-controlled methods. Here, we investigated the bonding quality of resistance-welded and adhesive-bonded PLA beams through three-point bending and measured the surface deformations using digital image correlation. Different metal meshes (30%/0.11 mm Ni—Cu, 34%/0.07 mm Ni—Cu, and 36%/0.25 mm Co—Ni) served as heating elements. The process parameters were varied for the 34%/0.07 mm Ni—Cu mesh to identify an optimum set of parameters. Results showed that this optimized displacement-controlled welding achieved 94% of the original strength of monolithic samples. This indicates that the new welding process not only ensures high-quality bonding and fine surface finishing but also promotes sustainability, recyclability, and economic efficiency in various polymer and composite structural applications.

Additive manufacturing↗
DOE OSTI2024

3-D Geological Modeling for Numerical Flow Simulation Studies of Gas Hydrate Reservoirs at the Kuparuk State 7-11-12 Pad in the Prudhoe Bay Unit on the Alaska North Slope

Accurate reservoir evaluation requires reliable three-dimensional (3-D) geological models. Here, this study conducted 3-D geological modeling for numerical flow simulation of the B1 sand gas hydrate reservoir at the Kuparuk State 7-11-12 pad, Prudhoe Bay Unit, Alaska North Slope. The model integrates well logs, core, and seismic data to address spatial heterogeneity in geological structures and reservoir properties. Two modeling types were performed: structural framework modeling and petrophysical property modeling. For structural framework modeling, seismic data and well log markers were used to reproduce subsurface structures characterized by a normal fault system. A volume-based modeling algorithm and stair-stepping grid were applied. The resulting 3-D model comprised 2,640,000 grid cells across 264 layers, including seven fault grids. For petrophysical property modeling, total porosity was initially modeled using sequential Gaussian simulation with collocated cokriging. To reproduce the upward coarsening of the B1 sand, upscaled log-derived total porosity and a three-dimensional (3-D) trend depicting total porosity variation were used as primary and secondary data, respectively. Gas hydrate saturation distribution was modeled similarly, with secondary data from estimated porosity distribution and seismic-derived acoustic impedance map enhancing accuracy. Results indicate higher gas hydrate saturation in the upper part of the B1 sand and areas with higher acoustic impedance. Intrinsic permeability was modeled from the total porosity and clay-bound water volume, and effective permeability was derived from the gas hydrate saturation and intrinsic permeability distributions based on the “Tokyo model”. Effective permeability distributions were influenced by the total porosity, gas hydrate saturation, and intrinsic permeability. Within the same layer, higher gas hydrate saturation leads to decreased effective permeability. In total, 100 sets of multiple scenarios were prepared, providing input data for dynamic flow simulations to evaluate the effects of lateral heterogeneity in reservoir properties and the hydraulic characteristics of faults on production behavior for preassessment before the long-term production test.

58 GEOSCIENCES↗
DOE OSTI2024

How Well Does the DOE Global Storm Resolving Model Simulate Clouds and Precipitation Over the Amazon?

This study assesses a 40-day 3.25-km global simulation of the Simple Cloud-Resolving E3SM Model (SCREAMv0) using high-resolution ground-based observations from the Atmospheric Radiation Measurement (ARM) Green Ocean Amazon (GoAmazon) field campaign. SCREAMv0 reasonably captures the diurnal timing of boundary layer clouds yet underestimates the boundary layer cloud fraction and mid-level congestus. SCREAMv0 well replicates the precipitation diurnal cycle, however it exhibits biases in the precipitation cluster size distribution compared to scanning radar observations. Specifically, SCREAMv0 overproduces clusters smaller than 128 km, and does not form enough large clusters. Such biases suggest an inhibition of convective upscale growth, preventing isolated deep convective clusters from evolving into larger mesoscale systems. This model bias is partially attributed to the misrepresentation of land-atmosphere coupling. This study highlights the potential use of high-resolution ground-based observations to diagnose convective processes in global storm resolving model simulations, identify key model deficiencies, and guide future process-oriented model sensitivity tests and detailed analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Shifts in Carbon Emissions Versus Sequestration From Hydropower Reservoirs in the Southeastern United States

Reservoirs are a significant source of carbon (C) to the atmosphere, but their emission rates vary in space and time. Here we compared C emissions via diffusive and ebullitive pathways at several stations in six large hydropower reservoirs in the southeastern US that were previously sampled in summer 2012. We found that carbon dioxide (CO 2 ) diffusion was the dominant flux pathway during 2012 and 2022, with only three exceptions where methane (CH 4 ) diffusion or CH 4 ebullition dominated. CH 4 diffusion rates were positively associated with water temperature. However, we found no clear predictors of CH 4 ebullition, which had extremely high variability, with rates ranging from 0 to 739 mg C m -2 day -1 . For CO 2 diffusion, the direction of the flux shifted between 2012 and 2022, where all but three stations across all reservoirs emitted CO 2 in summer 2012, but every station sequestered CO 2 in summer 2022. Here, indicators of greater algal production were associated with CO 2 sequestration, including surface chlorophyll- a concentration, surface dissolved oxygen saturation, and pH. Additional sampling campaigns outside the summer season highlighted the importance of seasonal phenology in primary production on the direction of CO 2 diffusive fluxes, which shifted to positive CO 2 fluxes by the end of August as productivity decreased. Our results demonstrate the importance of capturing CO 2 sequestration in field and modeling measurements and understanding the seasonal drivers of these estimates. Measuring C emissions from multiple pathways in reservoirs and understanding their spatiotemporal responses and variability are vital to reducing uncertainties in global upscaling efforts.

13 HYDRO ENERGY↗
DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 1. Characterizing Thermal–Hydrological–Mechanical Processes

Abstract Bentonite clay is widely used in engineered barrier systems for the permanent disposal of high‐level radioactive waste due to its low permeability, high swelling capacity, and thermal stability. However, the complex thermal‐hydrological‐mechanical (THM) processes induced by heating from decaying radioactive waste and hydration from surrounding rock can lead to heterogeneous changes that are difficult to measure and predict. This study develops an Electrical Resistivity Tomography (ERT)‐based framework for monitoring THM processes, progressing from sample‐scale to bench‐scale tests, to inform field‐scale applications. Sample‐scale tests analyzed small bentonite samples under controlled variations in water content, temperature, and porosity to establish fundamental resistivity relationships. Bench‐scale tests involved larger bentonite columns subjected to heating (up to 200°C) and hydration under controlled pressure, simulating repository conditions. ERT measurements, complemented by X‐ray CT imaging, temperature monitoring, and tracing sensors, revealed coupled THM processes, such as hydration‐induced compression, swelling, and thermal gradients, leading to complex resistivity patterns. The results demonstrate the potential of ERT for capturing THM‐induced resistivity changes, though challenges remain in upscaling and quantitative analysis. This study evaluates laboratory test capabilities and proposes future improvements for understanding THM‐induced resistivity responses. A conceptual framework for ERT implementation in field‐scale monitoring is presented, synthesizing findings from both scales and exploring how ERT data can inform long‐term modeling and reduce prediction uncertainties. Overall, this ERT‐based framework offers a robust method for monitoring bentonite buffers, aiding in early issue detection and supporting the safe long‐term disposal of radioactive waste in geological repositories, while highlighting the need for future development. Plain Language Summary Bentonite clay is crucial in engineered barrier systems (EBS) for containing high‐level radioactive waste due to its ability to absorb water, swell, seal and remain stable under high temperatures. When bentonite absorbs water and heats up from radioactive decay, it experiences complex changes in its physical and mechanical properties. Understanding these changes is important for ensuring the long‐term safety and effectiveness of EBS. This study used Electrical Resistivity Tomography (ERT), a non‐invasive method that measures electrical conductivity to monitor these changes during laboratory experiments. The ERT data revealed significant variations in resistivity corresponding to changes in water content, temperature, and density, providing detailed spatial and temporal insights into the behavior of bentonite. These findings enhance our ability to predict the long‐term performance of bentonite barriers, ensuring the safe containment of radioactive waste. By improving our understanding of bentonite's behavior, this research supports the development of more reliable and effective barrier systems for radioactive waste disposal, protecting the environment and public health. Key Points ERT monitoring was employed to capture resistivity changes in bentonite during controlled heating and hydration experiments, providing insights into THM processes ERT data reveal significant resistivity changes correlated with water content, temperature, and mechanical effects, enhancing the understanding of THM dynamics in bentonite This study explores the potential of the framework for application in field‐scale EBS monitoring, emphasizing the need for integrating additional geophysical methods for comprehensive subsurface imaging

Chen, Hang↗
DOE OSTI2024

Empowering Machine Learning Forecasting of Labquake Using Event‐Based Features and Clustering Characteristics

Abstract Following recent advances of machine learning (ML), we present a novel approach to extract spatiotemporal seismo‐mechanical features from Acoustic Emission (AE) catalogs to empower ML‐based forecasting. The AE data were recorded during laboratory stick‐slip experiments on granite samples cut by rough faults. Based on the features computed for a past time window, a random forest (RF) classifier is used to forecast the occurrence of a large magnitude event ( M AE > 3.5) in the next time window. Event‐based features allow us to associate informative time‐space characteristics to each feature and nearest‐neighbor clustering analysis enables us to separate background and clustered seismicity and train individual models. The results show that the separation of AEs enhances the forecasting accuracy from 73.2% for the entire catalog up to 82.1% and 89.0% if background and clustered events are used separately. The presented new approach may be upscaled for applications to forecast tectonic earthquakes.

Karimpouli, Sadegh↗
DOE OSTI2026

Evaluation of top-down and bottom-up global terrestrial respiration estimates and their mismatch with model simulations

Terrestrial respiration is one of the most poorly understood processes in the global carbon cycle, making respiration predictions uncertain. However, expanding observations and machine learning approaches have led to a proliferation of estimates. We compiled total ecosystem and heterotrophic respiration estimates derived from top-down atmospheric inversions and bottom-up upscaling of ecosystem observations and compared them with dynamic vegetation models (DGVM) simulations over the 1980-2020 period. Our analysis revealed a convergence in mean annual global total ecosystem respiration estimates between top-down 97.1 (± SD 6.8) PgC yr-1 and bottom-up 98.5 (+/-13.4) PgC yr-1, which were both significantly lower than the ensemble mean from DGVMs estimates 133.7 (±4.7) PgC yr-1. We also found similar temporal trends between top-down estimates with a mean of 0.075 (±0.05) PgC yr-2, and bottom-up estimates of 0.05 (±0.05) PgC yr-2, which were 5 to 7 times smaller than the ensemble mean trend of 0.34 PgC yr-2 simulated by DGVMs. Global heterotrophic respiration showed much less agreement, ranging from top-down estimates of 42.7 (±4.0) PgC yr-1 to bottom-up estimates of 51.5 (±4.0) PgC yr-1 and a significantly larger ensemble model mean estimate of 60.8 PgC yr-1 (±1.9). The temporal trends in observation-based bottom-up estimates of heterotrophic respiration of 0.03 PgC yr-2 were five times lower than the model ensemble mean 0.15 PgC yr-2. Large regional disagreements in heterotrophic respiration estimates and simulations were evident in tropical and boreal latitudes. Therefore, improved regional and heterotrophic respiration estimates are necessary to reduce uncertainties regarding the future vulnerability of soil carbon.

Ballantyne, Ashley↗
DOE OSTI2025

Drivers and impacts of sediment deposition in Amazonian floodplains

Abstract The Amazon River carries enormous amounts of sediment from the Andes mountains, much of which is deposited in its floodplains. However, accurate quantification of the sediment sink at fine spatiotemporal scales is still challenging. Here, we present a high-resolution hydrodynamic-sediment model to simulate sediment deposition in a representative Amazon/Solimões floodplain. The process is found to be jointly driven by inundation, suspended sediment concentration in the Amazon River, and floodplain hydrodynamics and only weakly correlated with inundation level. By upscaling the sediment deposition rate (1.33 ± 0.24 kg m −2 yr −1 ), we estimate the trapping of 77.3 ± 13.9 Mt (or 6.1 ± 1%) of the Amazon River sediment by the Amazon/Solimões floodplains every year. Widespread deforestation would reduce the trapping efficiency of the floodplains over time, exacerbating downstream river aggradation. Additionally, we show that the deposition of sediment-associated organic carbon plays a minor role in fueling carbon dioxide and methane emissions in the Amazon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Global terrestrial nitrogen fixation and its modification by agriculture

Biological nitrogen fixation (BNF) is the largest natural source of new nitrogen (N) that supports terrestrial productivity, yet estimates of global terrestrial BNF remain highly uncertain. Here, in this study, we show that this uncertainty is partly because of sampling bias, as field BNF measurements in natural terrestrial ecosystems occur where N fixers are 17 times more prevalent than their mean abundances worldwide. To correct this bias, we develop new estimates of global terrestrial BNF by upscaling field BNF measurements using spatially explicit abundances of all major biogeochemical N-fixing niches. We find that natural biomes sustain lower BNF, 65 (52–77) Tg N yr −1 , than previous empirical bottom-up estimates, with most BNF occurring in tropical forests and drylands. We also find high agricultural BNF in croplands and cultivated pastures, 56 (54–58) Tg N yr −1 . Agricultural BNF has increased terrestrial BNF by 64% and total terrestrial N inputs from all sources by 60% over pre-industrial levels. Our results indicate that BNF may impose stronger constraints on the carbon sink in natural terrestrial biomes and represent a larger source of agricultural N than is generally considered in analyses of the global N cycle, with implications for proposed safe operating limits for N use.

Reis Ely, Carla R. [Oregon State Univ., Corvallis,↗
DOE OSTI2025

A global dataset of terrestrial biological nitrogen fixation

Biological nitrogen fixation (BNF) is the main natural source of new nitrogen inputs in terrestrial ecosystems, supporting terrestrial productivity, carbon uptake, and other Earth system processes. We assembled a comprehensive global dataset of field measurements of BNF in all major N-fixing niches across natural terrestrial biomes derived from the analysis of 376 BNF studies. The dataset comprises 32 variables, including site location, biome type, N-fixing niche, sampling year, quantification method, BNF rate (kg N ha −1 y −1 ), the percentage of nitrogen derived from the atmosphere (%N dfa ), N fixer or N-fixing substrate abundance, BNF rate per unit of N fixer abundance, and species identity. Overall, the dataset combines 1,207 BNF rates for trees, shrubs, herbs, soil, leaf litter, woody litter, dead wood, mosses, lichens, and biocrusts, 152 herb %N dfa values, 1,005 measurements of N fixer or N-fixing substrate abundance, and 762 BNF rates per unit of N fixer abundance for a total of 424 species across 66 countries. This dataset facilitates synthesis, meta-analysis, upscaling, and model benchmarking of BNF fluxes at multiple spatial scales.

Reis Ely, Carla R. [Oregon State Univ., Corvallis,↗
DOE OSTI2024

Scalable electrified cementitious materials production and recycling

The production of Portland cement, the industry-standard cement, contributes ~8% of global CO 2 emissions through fossil-fuel heating and decomposition of limestone (the primary cement raw material). Decarbonization, e.g., via direct electrification, of this 200-year-old liming routine is extremely challenging at the industry scale. We propose a scalable electrochemical decarbonization approach to circumvent the limestone use by switching to carbon-free calcium silicates from abundant minerals and recycled concrete. Water electrolysis produces protons and hydroxides to drive a pH gradient that accelerates Ca 2+ ion leaching from calcium silicates and captures atmospheric CO 2 to form carbon-negative CaCO 3 , which serves as the feedstock for cement manufacturing or as the carbon-mineralized product for cement substitution with permanent carbon storage. Value-added co-products amorphous silica and green H 2 further enhance cement performance and supplant fossil fuels for net-zero transition, respectively. The products readily meet present-day regulatory standards and demands, and the approach readily synergizes with business-as-usual cement manufacturing and concrete construction, which are important for upscaling and structural safety, promising ready reception by the public and industries. Blended Portland cement produced through our approach with carbon-negative CaCO 3 and silica demonstrates enhanced resilience and achieves carbon neutrality or negativity when incorporating storage or circulation of CO 2 from cement plant flue gas, respectively. This low-cost, electrochemical cement production approach using abundant ubiquitous raw materials enables electrification, transition to clean fuel, and decarbonization at a gigaton scale.

36 MATERIALS SCIENCE↗
DOE OSTI2025

From lignin to market: a technical and economic perspective of reductive depolymerization approaches

Lignin has grown into one of the main candidates to replace fossil-based resources as it is the largest renewable source of aromatic building blocks. The complex structure of polymeric lignin, however, requires depolymerization to simpler building blocks for the chemical industry. One of the most promising depolymerization approaches is reductive depolymerization of which two process configurations are currently studied in pilot scale installations for upscaling to industrial scale: (i) reductive catalytic fractionation (RCF), and (ii) reductive catalytic depolymerization (RCD). Both technical and techno-economic aspects will be covered within this review, discussing the advantages and challenges of both approaches regarding processing, production costs, product output, and applications. In this regard, RCF benefits from its decreased energy and solvent consumption linked with being a one-step process and delivers a product with a high monomer content (∼25–45 wt%). RCD, on the other hand, has the advantage of continuous processing and reduced catalyst fouling and delivers a product that mainly consists of oligomers (<10 wt% monomers). The complete overview of both processes presented here addresses their potential, and can guide future researchers, policy makers and companies to make thoughtful decisions on lignin valorization.

09 BIOMASS FUELS↗
DOE OSTI2024

Scale translation yields insights into gas adsorption under nanoconfinement

This work describes a scale-translating simulation framework to investigate gas adsorption behavior in nanoconfined pores. The framework combines molecular simulations (MSs), equation of state (EoS), and lattice Boltzmann (LB) simulations. MSs reveal the physics of methane adsorption in nano-sized pores, where input values of fugacity coefficients are optimized based on EoS predictions. Then, an LB free-energy model, which incorporates a viral EoS, upscales intermolecular forces and estimates adsorption behavior via a proposed fluid–wall interaction model. Armed with the values of the LB interaction parameter as a function of pressure, the LB model is used to predict fluid behavior in irregular nanopores, and the results are validated against reference MS data. The LB model is then used to study adsorption behavior at a continuum scale in representative organic shale nanopores based on finely characterized Vaca Muerta shale samples. Furthermore, the results show that methane adsorption could significantly increase contained fluids by 10%–25% in pores smaller than 20 nm. However, in larger pores (40 nm to 90 nm), adsorption's impact diminishes to 2%–3%, suggesting sorption's negligible role beyond a 40 nm pore size.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Effect of helium bubbles on the mobility of edge dislocations in copper

Abstract Helium bubbles can form in materials upon exposure to irradiation. It is well known that the presence of helium bubbles can cause changes in the mechanical behavior of materials. To improve the lifetime of nuclear components, it is important to understand deformation mechanisms in helium-containing materials. In this work, we investigate the interactions between edge dislocations and helium bubbles in copper using molecular dynamics (MD) simulations. We focus on the effect of helium bubble pressure (equivalently, the helium-to-vacancy ratio) on the obstacle strength of helium bubbles and their interaction with dislocations. Our simulations predict significant differences in the interaction mechanisms as a function of helium bubble pressure. Specifically, bubbles with high internal pressure are found to exhibit weaker obstacle strength as compared to low-pressure bubbles of the same size due to the formation of super-jogs in the dislocation. Activation energies and rate constants extracted from the MD data confirm this transition in mechanism and enable upscaling of these phenomena to higher length-scale models.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Challenges in Rotor Aerodynamic Modeling for Non-Uniform Inflow Conditions

Within an international collaboration framework, the accuracy of rotor aerodynamic models used for design load calculations of wind turbines is being assessed. Where the use of high-fidelity computation fluid dynamics (CFD) and mid-fidelity free-vortex wake (FVW) models has become commonplace within the wind energy community, these still fail to meet the requirements in terms of execution time and computational cost needed for design load calculations. The fast but engineering fidelity blade-element/momentum (BEM) method can therefore still be considered the industry workhorse for design load simulations. At the same time, upscaling of wind turbine rotors makes inflow non-uniformities (e.g. shear, veer, turbulence) more important. The objective of this work is to assess model accuracy in non-uniform inflow conditions, which violate several BEM assumptions. Thereto a comparison in turbulent inflow has been executed including a wide variety of codes, focusing on the DanAero field measurements, where a 2.3-MW turbine was equipped with, among other sensors, a pressure measurement apparatus. The results indicate that, although average load patterns are in good agreement, this does not hold for the unsteady loads that drive fatigue damage and aero-elastic stability. A simplified comparison round in vertical shear was initiated to investigate the observed differences in a more controlled manner. A consistent offset in load amplitude was observed between CFD and free-vortex codes on the one hand and BEM-type codes on the other hand. To shed more light on the observations, dedicated efforts are ongoing to pinpoint the cause for these differences, in the end leading to guidelines for an improved BEM implementation.

17 WIND ENERGY↗
DOE OSTI2025

The Emergence and Promise of Functional Chemogeography of Organic Matter

Organisms in ecosystems continuously release a myriad of organic matter molecules that undergo microbial and abiotic transformation, processes that critically influence carbon storage and climate feedbacks. Yet, a systematic understanding of what determines the transformation and persistence of organic matter across spatiotemporal scales remains elusive. We propose an emerging framework, termed “functional chemogeography,” to understand transformation and persistence of organic matter based on the chemical traits of molecules. This framework extends beyond a sole focus on intrinsic traits, which remain relatively constant across spatiotemporal scales, to emphasize extrinsic traits such as biochemical transformations and environmental responses, which vary spatiotemporally and are shaped by both intrinsic traits and the environment. When upscaled to the assemblage level using functional diversity indices, these extrinsic traits reveal a significant, and in some cases superior, capacity than intrinsic traits to explain biogeochemical processes, as demonstrated through a case study of dissolved organic matter in China's lakes. In conclusion, by integrating trait-based perspectives into predictive models, this framework helps bridge chemical complexity with ecosystem biogeochemistry, thereby advancing our ability to predict the fate of global organic carbon under environmental change.

chemical traits↗