Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Unconditionally stable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Compact high order schemes for the Euler equations

An implicit approximate factorization (AF) algorithm is constructed which has the following characteistics. In 2-D: The scheme is unconditionally stable, has a 3 x 3 stencil and at steady state has a fourth order spatial accuracy. The temporal evolution is time accurate either to first or second order through choice of parameter. In 3-D: The scheme has almost the same properties as in 2-D except that it is now only conditionally stable, with the stability condition (the CFL number) being dependent on the cell aspect ratios, delta y/delta x and delta z/delta x. The stencil is still compact and fourth order accuracy at steady state is maintained. Numerical experiments on a 2-D shock-reflection problem show the expected improvement over lower order schemes, not only in accuracy (measured by the L sub 2 error) but also in the dispersion. It is also shown how the same technique is immediately extendable to Runge-Kutta type schemes resulting in improved stability in addition to the enhanced accuracy.

Abarbanel, Saul↗
NASA NTRS1988

Extensions of the CSCM methodology for nonequilibrium reacting gas flows

The paper describes the extension of the CSCM flux difference splitting to produce conservative unconditionally stable implicit upwind methods for the extended equation set. The CSCM-S single data level relaxation algorithm is argued to be particularly advantageous for efficiently solving the set of equations. Attention is given to issues of alternative state variable representations and to complementary thermodynamic relations that parameterize and need to be effectively coupled with the solution procedure for the partial differential equations. Within the framework of iteration, consideration is given to more efficient approximate solution procedures than the full block coupled LU decomposition. Results of early numerical experiments are given to illustrate the developments.

Lombard, C. K.↗
NASA NTRS1988

Compact high-order schemes for the Euler equations

An implicit approximate factorization (AF) algorithm is constructed which has the following characteristics. In 2-D: the scheme is unconditionally stable, has a 3 x 3 stencil and at steady state has a fourth order spatial accuracy. The temporal evolution is time accurate either to first or second order through choice of parameter. In 3-D: the scheme has almost the same properties as in 2-D except that it is now only conditionally stable, with the stability condition (the CFL number) being dependent on the cell aspect ratios, delta y/delta x and delta z/delta x. The stencil is still compact and fourth order accuracy at steady state is maintained.

Abarbanel, Saul↗
NASA NTRS1991

Asymptotic integration algorithms for nonhomogeneous, nonlinear, first order, ordinary differential equations

New methods for integrating systems of stiff, nonlinear, first order, ordinary differential equations are developed by casting the differential equations into integral form. Nonlinear recursive relations are obtained that allow the solution to a system of equations at time t plus delta t to be obtained in terms of the solution at time t in explicit and implicit forms. Examples of accuracy obtained with the new technique are given by considering systems of nonlinear, first order equations which arise in the study of unified models of viscoplastic behaviors, the spread of the AIDS virus, and predator-prey populations. In general, the new implicit algorithm is unconditionally stable, and has a Jacobian of smaller dimension than that which is acquired by current implicit methods, such as the Euler backward difference algorithm; yet, it gives superior accuracy. The asymptotic explicit and implicit algorithms are suitable for solutions that are of the growing and decaying exponential kinds, respectively, whilst the implicit Euler-Maclaurin algorithm is superior when the solution oscillates, i.e., when there are regions in which both growing and decaying exponential solutions exist.

Walker, K. P.↗
NASA NTRS1990

A finite element solver for 3-D compressible viscous flows

Computation of the flow field inside a space shuttle main engine (SSME) requires the application of state of the art computational fluid dynamic (CFD) technology. Several computer codes are under development to solve 3-D flow through the hot gas manifold. Some algorithms were designed to solve the unsteady compressible Navier-Stokes equations, either by implicit or explicit factorization methods, using several hundred or thousands of time steps to reach a steady state solution. A new iterative algorithm is being developed for the solution of the implicit finite element equations without assembling global matrices. It is an efficient iteration scheme based on a modified nonlinear Gauss-Seidel iteration with symmetric sweeps. The algorithm is analyzed for a model equation and is shown to be unconditionally stable. Results from a series of test problems are presented. The finite element code was tested for couette flow, which is flow under a pressure gradient between two parallel plates in relative motion. Another problem that was solved is viscous laminar flow over a flat plate. The general 3-D finite element code was used to compute the flow in an axisymmetric turnaround duct at low Mach numbers.

Reddy, K. C.↗
NASA NTRS1991

Numerical identification of boundary conditions on nonlinearly radiating inverse heat conduction problems

An explicit and unconditionally stable finite difference method for the solution of the transient inverse heat conduction problem in a semi-infinite or finite slab mediums subject to nonlinear radiation boundary conditions is presented. After measuring two interior temperature histories, the mollification method is used to determine the surface transient heat source if the energy radiation law is known. Alternatively, if the active surface is heated by a source at a rate proportional to a given function, the nonlinear surface radiation law is then recovered as a function of the interface temperature when the problem is feasible. Two typical examples corresponding to Newton cooling law and Stefan-Boltzmann radiation law respectively are illustrated. In all cases, the method predicts the surface conditions with an accuracy suitable for many practical purposes.

Murio, Diego A.↗
NASA NTRS1992

Numerical simulation of conservation laws

A new numerical framework for solving conservation laws is being developed. This new approach differs substantially from the well established methods, i.e., finite difference, finite volume, finite element and spectral methods, in both concept and methodology. The key features of the current scheme include: (1) direct discretization of the integral forms of conservation laws, (2) treating space and time on the same footing, (3) flux conservation in space and time, and (4) unified treatment of the convection and diffusion fluxes. The model equation considered in the initial study is the standard one dimensional unsteady constant-coefficient convection-diffusion equation. In a stability study, it is shown that the principal and spurious amplification factors of the current scheme, respectively, are structurally similar to those of the leapfrog/DuFort-Frankel scheme. As a result, the current scheme has no numerical diffusion in the special case of pure convection and is unconditionally stable in the special case of pure diffusion. Assuming smooth initial data, it will be shown theoretically and numerically that, by using an easily determined optimal time step, the accuracy of the current scheme may reach a level which is several orders of magnitude higher than that of the MacCormack scheme, with virtually identical operation count.

Chang, Sin-Chung↗
NASA NTRS1991

Numerical simulations of thermal detection of disbonds in lap joints

A 2D time-dependent FEM heat-transfer algorithm that is unconditionally stable and implicit is presently used to solve for the time-dependence of a structure's temperature. By examining data-reduction techniques in the framework of simulation data, the contrast enhancement afforded by a given technique can be evaluated without regard to experimental error. The present computational simulations demonstrate that the time-derivative technique can clearly delineate the substructure of lap-joint geometries; in addition, histograms of the front surface images are able to quantitatively measure contrast-enhancements for various inspection and data-reduction techniques.

Howell, P. A.↗
NASA NTRS1991

A new finite element formulation for computational fluid dynamics. X - The compressible Euler and Navier-Stokes equations

A space-time element method is presented for solving the compressible Euler and Navier-Stokes equations. The proposed formulation includes the variational equation, predictor multi-corrector algorithms and boundary conditions. The variational equation is based on the time-discontinuous Galerkin method, in which the physical entropy variables are employed. A least-squares operator and a discontinuity-capturing operator are added, resulting in a high-order accurate and unconditionally stable method. Implicit/explicit predictor multi-corrector algorithms, applicable to steady as well as unsteady problems, are presented; techniques are developed to enhance their efficiency. Implementation of boundary conditions is addressed; in particular, a technique is introduced to satisfy nonlinear essential boundary conditions, and a consistent method is presented to calculate boundary fluxes. Numerical results are presented to demonstrate the performance of the method.

Shakib, Farzin↗
NASA NTRS1992

Finite element developments for two dimensional multiple-interface phase change problems

Finite element developments for multiple phase change problems in two-dimensional models are presented for the first time. The enthalpy method is used to simulate latent heat release in conjunction with fixed grid techniques. An unconditionally stable implicit method is used for the time integration. The effects of boundary conditions and the different phase regions on the multiple phase front developments are examined for numerous examples. Discussions and conclusions are appropriately addressed.

Ouyang, Tianhong↗
NASA NTRS1993

Computational solution of the defect stream-function equation for nonequilibrium turbulent boundary layers

The derivation of the accurate, second-order, almost linear, approximate equation governing the defect stream function for nonequilibrium compressible turbulent boundary layers is reviewed. The similarity of this equation to the heat conduction equation is exploited in the development of an unconditionally stable, tridiagonal computational method which is second-order accurate in the marching direction and fourth-order accurate in the surface-normal direction. Results compare well with experimental data. Nonlinear effects are shown to be small. This two-dimensional method is simple and has been implemented on a programmable calculator.

Barnwell, Richard W.↗
NASA NTRS1993

On the spectral stability of time integration algorithms for a class of constrained dynamics problems

Incomplete field formulations have recently been the subject of intense research because of their potential in coupled analysis of independently modeled substructures, adaptive refinement, domain decomposition, and parallel processing. This paper discusses the design and analysis of time-integration algorithms for these formulations and emphasizes the treatment of their inter-subdomain constraint equations. These constraints are shown to introduce a destabilizing effect in the dynamic system that can be analyzed by investigating the behavior of the time-integration algorithm at infinite and zero frequencies. Three different approaches for constructing penalty-free unconditionally stable second-order accurate solution procedures for this class of hybrid formulations are presented, discussed and illustrated with numerical examples. The theoretical results presented in this paper also apply to a large family of nonlinear multibody dynamics formulations. Some of the algorithms outlined herein are important alternatives to the popular technique consisting of transforming differential/algebraic equations into ordinary differential equations via the introduction of a stabilization term that depends on arbitrary constants and that influences the computed so1ution.

Farhat, Charbel↗
NASA NTRS1993

A piezoelectric transformer

This work describes a modeling and design method whereby a piezoelectric system is formulated by two sets of second-order equations, one for the mechanical system, and the other for the electrical system, coupled through the piezoelectric effect. The solution to this electromechanical coupled system gives a physical interpretation of the piezoelectric effect as a piezoelectric transformer that is a part of the piezoelectric system, which transfers the applied mechanical force into a force-controlled current source, and short circuit mechanical compliance into capacitance. It also transfers the voltage source into a voltage-controlled relative velocity input, and free motional capacitance into mechanical compliance. The formulation and interpretation simplify the modeling of smart structures and lead to physical insight that aids the designer. Due to its physical realization, the smart structural system can be unconditional stable and effectively control responses. This new concept has been demonstrated in three numerical examples for a simple piezoelectric system.

Won, C. C.↗
NASA NTRS1993

A transient FETI methodology for large-scale parallel implicit computations in structural mechanics, part 2

Explicit codes are often used to simulate the nonlinear dynamics of large-scale structural systems, even for low frequency response, because the storage and CPU requirements entailed by the repeated factorizations traditionally found in implicit codes rapidly overwhelm the available computing resources. With the advent of parallel processing, this trend is accelerating because explicit schemes are also easier to parallellize than implicit ones. However, the time step restriction imposed by the Courant stability condition on all explicit schemes cannot yet and perhaps will never be offset by the speed of parallel hardware. Therefore, it is essential to develop efficient and robust alternatives to direct methods that are also amenable to massively parallel processing because implicit codes using unconditionally stable time-integration algorithms are computationally more efficient than explicit codes when simulating low-frequency dynamics. Here we present a domain decomposition method for implicit schemes that requires significantly less storage than factorization algorithms, that is several times faster than other popular direct and iterative methods, that can be easily implemented on both shared and local memory parallel processors, and that is both computationally and communication-wise efficient. The proposed transient domain decomposition method is an extension of the method of Finite Element Tearing and Interconnecting (FETI) developed by Farhat and Roux for the solution of static problems. Serial and parallel performance results on the CRAY Y-MP/8 and the iPSC-860/128 systems are reported and analyzed for realistic structural dynamics problems. These results establish the superiority of the FETI method over both the serial/parallel conjugate gradient algorithm with diagonal scaling and the serial/parallel direct method, and contrast the computational power of the iPSC-860/128 parallel processor with that of the CRAY Y-MP/8 system.

Farhat, Charbel↗
NASA NTRS1993

Convergence acceleration of implicit schemes in the presence of high aspect ratio grid cells

The performance of Navier-Stokes codes are influenced by several phenomena. For example, the robustness of the code may be compromised by the lack of grid resolution, by a need for more precise initial conditions or because all or part of the flowfield lies outside the flow regime in which the algorithm converges efficiently. A primary example of the latter effect is the presence of extended low Mach number and/or low Reynolds number regions which cause convergence deterioration of time marching algorithms. Recent research into this problem by several workers including the present authors has largely negated this difficulty through the introduction of time-derivative preconditioning. In the present paper, we employ the preconditioned algorithm to address convergence difficulties arising from sensitivity to grid stretching and high aspect ratio grid cells. Strong grid stretching is particularly characteristic of turbulent flow calculations where the grid must be refined very tightly in the dimension normal to the wall, without a similar refinement in the tangential direction. High aspect ratio grid cells also arise in problems that involve high aspect ratio domains such as combustor coolant channels. In both situations, the high aspect ratio cells can lead to extreme deterioration in convergence. It is the purpose of the present paper to address the reasons for this adverse response to grid stretching and to suggest methods for enhancing convergence under such circumstances. Numerical algorithms typically possess a maximum allowable or optimum value for the time step size, expressed in non-dimensional terms as a CFL number or vonNeumann number (VNN). In the presence of high aspect ratio cells, the smallest dimension of the grid cell controls the time step size causing it to be extremely small, which in turn results in the deterioration of convergence behavior. For explicit schemes, this time step limitation cannot be exceeded without violating stability restrictions of the scheme. On the other hand, for implicit schemes, which are typically unconditionally stable, there appears to be room for improvement through careful tailoring of the time step definition based on results of linear stability analyses. In the present paper, we focus on the central-differenced alternating direction implicit (ADI) scheme. The understanding garnered from this analyses can then be applied to other implicit schemes. In order to systematically study the effects of aspect ratio and the methods of mitigating the associated problems, we use a two pronged approach. We use stability analyses as a tool for predicting numerical convergence behavior and numerical experiments on simple model problems to verify predicted trends. Based on these analyses, we determine that efficient convergence may be obtained at all aspect ratios by getting a combination of things right. Primary among these are the proper definition of the time step size, proper selection of viscous preconditioner and the precise treatment of boundary conditions. These algorithmic improvements are then applied to a variety of test cases to demonstrate uniform convergence at all aspect ratios.

Buelow, B. E. O.↗
NASA NTRS1995

Robust integration schemes for generalized viscoplasticity with internal-state variables. Part 1: Theoretical developments and applications

This two-part report is concerned with the development of a general framework for the implicit time-stepping integrators for the flow and evolution equations in generalized viscoplastic models. The primary goal is to present a complete theoretical formulation, and to address in detail the algorithmic and numerical analysis aspects involved in its finite element implementation, as well as to critically assess the numerical performance of the developed schemes in a comprehensive set of test cases. On the theoretical side, the general framework is developed on the basis of the unconditionally-stable, backward-Euler difference scheme as a starting point. Its mathematical structure is of sufficient generality to allow a unified treatment of different classes of viscoplastic models with internal variables. In particular, two specific models of this type, which are representative of the present start-of-art in metal viscoplasticity, are considered in applications reported here; i.e., fully associative (GVIPS) and non-associative (NAV) models. The matrix forms developed for both these models are directly applicable for both initially isotropic and anisotropic materials, in general (three-dimensional) situations as well as subspace applications (i.e., plane stress/strain, axisymmetric, generalized plane stress in shells). On the computational side, issues related to efficiency and robustness are emphasized in developing the (local) interative algorithm. In particular, closed-form expressions for residual vectors and (consistent) material tangent stiffness arrays are given explicitly for both GVIPS and NAV models, with their maximum sizes 'optimized' to depend only on the number of independent stress components (but independent of the number of viscoplastic internal state parameters). Significant robustness of the local iterative solution is provided by complementing the basic Newton-Raphson scheme with a line-search strategy for convergence. In the present first part of the report, we focus on the theoretical developments, and discussions of the results of numerical-performance studies using the integration schemes for GVIPS and NAV models.

Saleeb, Atef F.↗
NASA NTRS1995

Robust integration schemes for generalized viscoplasticity with internal-state variables. Part 2: Algorithmic developments and implementation

This two-part report is concerned with the development of a general framework for the implicit time-stepping integrators for the flow and evolution equations in generalized viscoplastic models. The primary goal is to present a complete theoretical formulation, and to address in detail the algorithmic and numerical analysis aspects involved in its finite element implementation, as well as to critically assess the numerical performance of the developed schemes in a comprehensive set of test cases. On the theoretical side, the general framework is developed on the basis of the unconditionally-stable, backward-Euler difference scheme as a starting point. Its mathematical structure is of sufficient generality to allow a unified treatment of different classes of viscoplastic models with internal variables. In particular, two specific models of this type, which are representative of the present start-of-art in metal viscoplasticity, are considered in applications reported here; i.e., fully associative (GVIPS) and non-associative (NAV) models. The matrix forms developed for both these models are directly applicable for both initially isotropic and anisotropic materials, in general (three-dimensional) situations as well as subspace applications (i.e., plane stress/strain, axisymmetric, generalized plane stress in shells). On the computational side, issues related to efficiency and robustness are emphasized in developing the (local) interative algorithm. In particular, closed-form expressions for residual vectors and (consistent) material tangent stiffness arrays are given explicitly for both GVIPS and NAV models, with their maximum sizes 'optimized' to depend only on the number of independent stress components (but independent of the number of viscoplastic internal state parameters). Significant robustness of the local iterative solution is provided by complementing the basic Newton-Raphson scheme with a line-search strategy for convergence. In the present second part of the report, we focus on the specific details of the numerical schemes, and associated computer algorithms, for the finite-element implementation of GVIPS and NAV models.

Li, Wei↗
NASA NTRS1995

A turbulence module for the NPARC code

A turbulence module is developed for the 2D version of the NPARC code which is currently restricted to planar or axisymmetric flows without swirling. Four turbulence models have been built into the module: Baldwin-Lomax, Chien, Shih-Lumley and CMOTT models. The first is a mixing-length eddy-viscosity model which is mainly used for initialization of computational fields and the last three are the low Reynolds number two-equation models. Unlike chien's model, both the Shih-Lumley and CMOTT models do not involve the dimensionless wall distance y(sup +), an advantage for separated flow calculations. Contrary to the NPARC and most other compressible codes, the non-delta form of transport equations is used which leads to a simpler linearization and is more effective than using the delta form in ensuring the positiveness of the turbulent kinetic energy and its dissipation rate. To reduce numerical diffusion while maintaining necessary stability, a second-order accurate and bounded scheme is used for the convective terms of the turbulent transport equations. This scheme is implemented in a deferred correction manner so that the main coefficients of the resulting difference equations are always positive, thus making the numerical solutions process unconditionally stable. The system of equations is solved via a decoupled method and by the alternating direction TDMA of Thomas. The module can be easily linked to the NPARC code for turbulent flow calculations.

Zhu, J.↗