SEARCH · Engineering Papers

Results for “UT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2019

Post-Perihelion Volatile Production and Release from Jupiter-Family Comet 45P/Honda-Mrkos-Pajdušáková

High-resolution infrared spectra of Jupiter-family comet 45P/Honda-Mrkos-Pajdušáková were obtained with NIRSPEC at the W. M. Keck Observatory on two post- perihelion dates (UT 2017 February 13 and 19), when the comet was at heliocentric distances of 1.01 and 1.10 AU, respectively. On UT February 13, H2O was measured simultaneously with six trace parent molecules: CH3OH, C2H6, HCN, NH3, C2H2, and H2CO. On UT February 19, CH4 and CO were also targeted in addition to the species measured on UT February 13. Abundances of CO, CH4, and C2H2 relative to H2O are consistent with values obtained from IRTF/iSHELL observations of 45P in early January 2017 just after perihelion when the heliocentric distance was 0.55–0.56 AU. Differences are seen in H2CO/H2O, C2H6/H2O, CH3OH/H2O, and HCN/H2O in February compared to January. Additionally, NH3 abundances appear highly variable during the February measurements, suggesting possible fluctuations of a factor of ten; however, there is significant uncertainty in quantifying NH3 owing to the marginal detections of only one or two lines on each of the two dates. Combining all infrared spectroscopic observations of 45P in January and February 2017, a post-perihelion relationship of Q(H2O) = (2.81 ± 0.25) × 10(exp 27) [R(sub h) (sup −3.83 ± 0.18)] molecules/s is derived. However, all measurements suggest significant variability in H O production on timescales of hours and days. Compared to other comets, volatile abundances relative to H2O in 45P are as follows: CO (depleted relative to all measured comets), CH3OH (enriched/all comets), CH4 and C2H6 (typical/all comets, enriched/Jupiter-family comets), C2H2 (depleted/all comets, typical/Jupiter-family comets), H2CO (January: typical, February depleted/all comets), HCN (January: severely depleted, February: typical/Jupiter-family comets). The small geocentric distances of the comet in February 2017 provide high spatial resolution in the coma of 45P (~12 and 19 km/pixel on February 13 and 19, respectively). Overall, the spatial distributions of volatiles and dust suggest a relatively symmetric and uniform coma during the UT February 13 and 19 observations, with small spatial differences noted between some volatile species. Measured C2H2 and HCN abundances are consistent with HCN as the primary parent of CN and C2H2 as a significant but not primary parent for C2, based on C2 and CN 2017 and previous apparitions. Extracted spectra show an increase in the dust-to-gas ratio in 45P from February 13 to 19 in agreement with contemporaneous narrowband optical measurements.

Russo, Neil Dello↗

NASA NTRS1985

Morphology of thermospheric composition variations in the quiet polar thermosphere from Dynamics Explorer measurements

Composition data obtained by the Neutral Atmosphere Composition Spectrometer carried aboard the Dynamics Explorer 2 satellite have been examined for variations in the polar regions during magnetically quiet conditions. A persistent enhancement of N2 density and a depletion of He density are present in the vicinity of the magnetic poles with maximum density response in the morning hours (magnetic) on average. A universal time (UT) variation in average density levels is evident near both the geographic and magnetic poles. There are systematic morphology changes with UT and between summer and winter which are qualitatively consistent with the shifting and spreading of thermospheric heating effects by the global circulation systems driven by EUV and magnetospheric sources. The magnitude of the UT variations is larger in the southern hemisphere on average, and the UT variations are larger in local winter than summer.

Hedin, A. E.↗

NASA NTRS1992

Gamma ray and microwave emission from 1991 June events

The Sun showed unprecedented microwave activities in Jun. 1991, which produced four major and numerous weaker bursts and gamma ray emission measured by the Gamma Ray Observatory. The 4 Jun. 1991 event shows a sharp maximum around 03:41 UT and weak emission a few minutes before the maximum in the gamma ray record of the Burst and Transient Source Experiment (BATSE), with a preliminary estimated energy of 5 MeV. Although the 80-GHz and possible 35-GHz records show more prominent emission in the pre-maximum stage. This strongly suggests the first observational evidence for gamma ray and mm-wave emission from relativistic electrons. Comparisons of the other three major events on 6 Jun. at 01:00 UT, 9 Jun. at 01:34 UT, and 11 Jun. at 01:51 UT between gamma ray and microwave emission are also in progress.

Enome, Shinzo↗

NASA NTRS1994

Aerosol particles in the upper troposphere and lower stratosphere: Elemental composition and morphology of individual particles in northern midlatitudes

Atmospheric particles were collected in the midlatitude upper troposphere (UT) and lower stratosphere (LS) by inetrial impaction for subsequent electron microscopy and individual particle element analysis. More than 97% of particles analyzed on impactor substrates exposed in the LS contained only O and S in detectable quantities; these particles are believed to be acidic sulfate. Nonsulfate materials seen in the remaining particles included soot, other c-rich substances and crustal materials. Although not predominantly sulfate, usually carried a sulfer-rich coating in the LS. Samples collected very near and just below the tropopause were also dominated by sulfates. The fraction of sulfate particles analyzed on impactor substrates exposed in the UT was 91-94% of the total particle concentration. Nonsulfate substances observed in the UT samples included crustal-type material, hydrated marine salts, carbon-rich materials of several types, and metal-containing substances of uncertain origin. Most of these UT particles were not coated with detectable quantitites of sulfate.

Sheridan, Patrick J.↗

NASA NTRS1994

Midtail plasma flows and the relationship to near-Earth substorm activity: A case study

Recent simulations of magnetotail reconnection have pointed to a link between plasma flows, dipolarization, and the substorm current wedge. In particular, Hesse and Birn (1991) have proposed that earthward jetting of plasma from the reconnection region transports flux into the near-Earth region. At the inner edge of the plasma sheet this flux piles up, producing a dipolarization of the magnetic field. The vorticity produced by the east-west deflection of the flow at the inner edge of the plasma sheet gives rise to field-aligned currents that have region 1 polarity. Thus in this scenario the earthward flow from the reconnection region produces the dipolarization ad the current wedge in a self-consistent fashion. In this study we examine observations made on April 8, 1985 by the Active Magnetospheric Particle Tracer Explorers (AMPTE)/Ion Release Module (IRM), the geosynchronous satellites 1979-053, 1983-019, and 1984-037, and Syowa station, as well as AE. This event is unique because IRM was located near the neutral sheet in the midnight sector for am extended period of time. Ground data show that there was ongoing activity in the IRM local time sector for several hours, beginning at 1800 UT and reaching a crescendo at 2300 UT. This activity was also accompanied by energetic particle variations, including injections, at geosynchronous orbit in the nighttime sector. Significantly, there were no fast flows at the neutral sheet until the great intensification of activity at 2300 UT. At that time, IRM recorded fast eartheard flow simultaneous with a dipolatization of the magetic field. We conclude that while the aforementioned scenario for the creation of the current wedge encounters serious problems explaining the earlier activity, the observations at 2300 UT are consistent with the scenario of Hesse and Birn (1191). On that basis it is argued that the physics of substorms is not exclusively rooted in the development of a global tearing mode. Processes at the inner edge of the cross-tail current that cause a disruption of the current and a consequent dipolarization and current wedge may be unrelated to the formation of a macroscale reconnection region. Thus the global evolution of a substorm is probably a complicated superposition of such processes operating on a very localized scale and a global macroscale process that allows for such things as releasing te energy stored in lobe flux and creation of plasmoids.

Lopez, R. E.↗

NASA NTRS1993

A multisatellite study of a pseudo-substorm onset in the near-Earth magnetotail

This paper reports the multisatellite and ground observations of two pseudo-substorm onset events that occurred successively at 0747 UT and 0811 UT, May 30, 1985, with more attention to the 0747 UT onset. The distinguishing features of the 0747 UT event are as follows. (1) The substorm-associated tail reconfiguration started in a very localized region in the near-Earth magnetotail. (2) The magnitude of the current disruption decreased markedly as the disruption region expanded tailward. (3) On the ground the onset of a very small negative bay (approx. 40 nT) was observed simultaneously with the onset of the current disruption, but over a much wider local time sector than the near-Earth tail reconfiguration. Positive bay onsets at mid-latitudes also had a longitudinally wide distribution. From these features we infer than in the present event the current disruption took place filamentarily near AMPTE/CCE at approx. 8.8 R(sub E). It is also inferred that pseudo-substorm onsets are distinguished from standard substorm onsets by the absence of a global expansion of the current disruption, and that the spatial scales of the onset region in the magnetosphere is not a major difference between the two. The present study suggests that the spatial distribution of the magnetic distortion before onsets is an important factor to determine the expansion scale of the current disruption. It is also suggested that the current disruption is basically an internal process of the magnetosphere.

Ohtani, S.↗

NASA NTRS1997

POLAR-UVI and other Coordinated Observations of a Traveling Convection Vortex Event Observed on 24 July 1996

Coordinated analysis of data from the POLAR UVI instrument, ground magnetometers, incoherent scatter radar, solar wind monitors IMP-8 and WIND, and DMSP satellite is focused on a traveling convection vortex (TCV) event on 24 July 1966. Starting at 10:48 UT, ground magnetometers in Greenland and eastern Canada measure pulsations consistent with the passing overhead of a series of alternating TCV field-aligned current pairs. Sondrestrom incoherent scatter radar measures strong modulation of the strength and direction of ionospheric plasma flow, The magnetometer pulsations grow in magnitude over the next hour, peaking in intensity at 11:39 UT, at which time the UVI instrument measures a localized intensification of auroral emissions over central and western Greenland. Subsequent images show the intensification grow in strength and propagate westward (tailward) until approximately 11:58 UT at which time the emissions fade. These observations are consistent with the westward passage of two pairs of moderately intense TCVs over central Greenland followed by a third very intense TCV pair. The intensification of auroral emissions at 11:39 UT is associated with the trailing vortex of the third TCV pair, thought to be the result of an upward field-aligned current. Measurements of the solar wind suggest that a pressure change may be responsible for triggering the first two pairs of TCVS, and that a subsequent sudden change in orientation of the IMF may have produced the intensification of the third TCV pair and the associated aurora] brightening. DMSP particle data indicate that the TCVs occur on field lines which map to the boundary plasma sheet or outer edge of the low latitude boundary layer.

Clauer, C. R.↗

NASA NTRS1998

Multi-Instrument Analysis of a Traveling Convection Vortex Event on July 24, 1996 Coordinated with the Polar UVI

We present the analysis of a coordinated set of observations from the POLAR Ultraviolet Imager (UVI), ground magnetometers, incoherent scatter radar, solar wind monitors, DMSP and GOES satellites, focused on a traveling convection vortex (TCV) event on 24th July 1996. Starting at approximately 10:48 UT, around magnetometers in Greenland and northern Canada observe pulsations consistent with the passing overhead of a series of alternating TCV filed-aligned current pairs. Azimuthal scans by the Sondrestrom incoherent scatter radar located near Kangerlussuaq (formerly Sondrestrom), Greenland, at this time show strong modulation in the strength and direction of ionospheric plasma flow. The magnetometer pulsations grow in magnitude over the next hour, peaking in intensity at 11:39 UT, at which time images form the UVI instrument show a localized intensification of auroral emissions over central and western Greenland. Subsequent images show the intensification grow in strength and propagate westward (tailward) until approximately 11:58 UT at which time the intensification fades. These observations are consistent with the westward passage of two pairs of moderately intense TCVs over central Greenland followed by a third very intense TCV pair. The intensification of auroral emissions at 11:39 UT is associated with the trailing vortex of the third TCV pair, thought to be the result of an upward field aligned current. The modulated flow observed by the radar is the result of the strong electric fields associated with the impulsive TCV related field aligned current systems as they pass through the field of view of the radar. Measurements of the solar wind from the V;IND and IMP-8 spacecraft suggest that a pressure change may be responsible for triggering the first two pairs of TCVS, and that a subsequent sudden change in the orientation of the interplanetary magnetic field may have produced the intensification of the third TCV pair and the associated auroral brightening. Magnetometer data from the GOES satellite located over the eastern United States at geostationary orbit is consistent with a series of field-aligned moving tailward past the satellite. DMSP particle data indicated that the TCVs occur on field lines which map to the boundary plasma sheet (BPS).

Sitar, R. J.↗

NASA NTRS2001

Grain Properties of Comet C/1995 O1 (Hale-Bopp) Deduced Through Computational Techniques

We present the computational analysis of the 7.6 - 13.2 micrometer infrared (IR) spectrophotometry (R approximately equal to 120) of comet C/1995 O1 (Hale-Bopp) in conjunction with concurrent observations which extend the spectral energy distribution from the near-infrared to far-infrared wavelengths. The observations include temporal epochs pre-perihelion, (1996 October UT and 1997 February UT), near perihelion (1997 April UT), and postperihelion (1997 June UT). Through the computational modeling of small amorphous carbon, and crystalline and amorphous silicate grains in Hale-Bopp's coma, we find that as the comet approached perihelion, the grain size distribution (the Hanner modified power law) steepened (N = 3.4 pre-perihelion, to N = 3.7 near and post-perihelion) along with an increase in the fractal porosity of larger (greater than 1 micrometer) grains. The peak of the grain size distribution remained constant (ap = 0.2 micrometer) at each epoch. We attribute the emergence of the 9.3 micrometer peak near perihelion to crystalline orthopyroxeno grains released from inside the nucleus. Crystalline silicates (olivine and orthopyroxene) make up about 30% (by mass) of the submicron sized (less than 1 micrometer) dust grains in Hale-Bopp's coma during each epoch.

Harker, David E.↗

NASA NTRS2002

Architectures for High-Performance Ceramic Composites Being Improved

A major thrust of the Ultra-Efficient Engine Technology (UEET) Program at the NASA Glenn Research Center is to develop advanced hot-section engine components using SiC/SiC ceramic matrix composites (CMC's) with thermostructural capability to 2400 F (1315 C). In previous studies, UEET determined that the higher the ultimate tensile strength (UTS) of the as-fabricated CMC, the greater its structural performance at 2400 F. Thus efforts have been ongoing within UEET to understand and develop fiber architecture approaches that can improve the UTS of SiC/SiC CMC's. Under UEET, SiC/SiC test panels and demonstration engine components are currently produced by the multi-ply layup of two-dimensional fabric pieces. The fabric is typically formed of multifilament tows containing high-performance Sylramic (Dow Corning) SiC fiber that is woven into two-dimensional five-harness satin fabric with 20 ends per inch in the 0 degree and 90 degree directions. In some cases, fabric pieces containing woven Sylramic fiber tows are thermally treated at NASA to form Sylramic-iBN fibers that contain a very thin in-situ-grown boron nitride layer on their surfaces. The final SiC/SiC panels and components are fabricated at the CMC vendor by compressing the fabric pieces in tools and then depositing a thin BN interphase coating on the fibers by chemical vapor deposition. The last step at the vendor is to infiltrate the BN-coated fiber architecture with SiC and silicon matrix constituents to form a dense product. Because the as-produced Sylramic fiber tows are sized with a thin polymer coating to facilitate handling and weaving, the individual fibers within the tows and fabric are in close contact with each other. This contact is further increased during fabric compression. One important recent finding is that increasing Sylramic fiber tow width in a fabric increases the UTS of the final SiC/SiC CMC. This effect is presumably related to minimizing fiber/fiber contact, which can be detrimental to CMC strength because of the boron-rich chemistry and roughness of the Sylramic fiber surface. Tows can be spread by mechanically agitating the Sylramic fabric prior to CMC fabrication or by simply thermally treating the Sylramic fabric as in the formation of the Sylramic-iBN fibers. However, CMC's with the treated Sylramic-iBN fabric are even stronger than CMC's with mechanically spread Sylramic tows. The extra strength capability is presumably related to the in situ BN on the fiber surface, which adds compliance to the fiber surfaces and is more resistant to oxygen impurities introduced during the chemical vapor deposition BN process. As shown, another important finding is that the use of fabric with tows having less than the standard of 20 ends per inch provides advantages in terms of reduced ply height and increased ply and CMC strength. The reduced ply height provides more control of part thickness by allowing more plies for a given thickness and by reducing interlaminar residual stresses between plies. The increased ply strength is presumably related to a reduced number of interlaced 90 tows, which, in turn, reduces the crimp angle on the high-modulus fibers in the 0 degree tows. Also, as shown, although fabric with fewer ends per inch reduced the maximum fiber fraction in an eight-ply CMC panel; CMC UTS actually increased because of increased ply strength. Thus, using fabric with fewer ends per inch has several advantages, including providing a significantly higher strength per fiber fraction in the CMC. Consequently, ongoing UEET efforts will attempt to use architectural approaches for components that minimize fiber-fiber contacts and fiber bending within the final composite microstructure.

Yun, Hee Mann↗

NASA NTRS2006

RTF+SpeX Near-IR Images and Spectra of the Moon Pre-impact and at Impact of SMART-1

We present SpeX 0.8-2.5 micron spectra and Br-gamma or J H or K-band images of the Moon on 2006 July 10 UT, 2006 Sep 1 UT, and 2006 Sep 3 UT. The first two dates are data taken in preparation (near Full Moon and 1 st quarter Moon) for observing the impact of ESA's SMART-1 Lunar satellite on 2006 Sep 3 UT. We hope to be presenting images (about 1 arc minute by 1 arc minute), and low resolution (Prism mode) spectra of the SMART-1 impact to be taken with the 60 arc second long slit.

Wooden, Diane H.↗

NASA NTRS2009

The Governing Processes and Timescales of Stratosphere-to-Troposphere Transport and its Contribution to Ozone in the Arctic Troposphere

We used the seasonality of a combination of atmospheric trace gases and idealized tracers to examine stratosphere-to-troposphere transport and its influence on tropospheric composition in the Arctic. Maximum stratosphere-to-troposphere transport of CFCs and O3 occurs in April as driven by the Brewer-Dobson circulation. Stratosphere-troposphere exchange (STE) occurs predominantly between 40 deg N to 80 deg N with stratospheric influx in the mid-latitudes (30-70 deg N) accounting for 67.81 percent of the air of stratospheric origin in the Northern Hemisphere extratropical troposphere. Transport from the lower stratosphere to the lower troposphere (LT) takes three months on average, one month to cross the tropopause, the second month to travel from the upper troposphere (UT) to the middle troposphere (MT), and the third month to reach the LT. During downward transport, the seasonality of a trace gas can be greatly impacted by wet removal and chemistry. A comparison of idealized tracers with varying lifetimes suggests that when initialized with the same concentrations and seasonal cycles at the tropopause, trace gases that have shorter lifetimes display lower concentrations, smaller amplitudes, and earlier seasonal maxima during transport to the LT. STE contributes to O3 in the Arctic troposphere directly from the transport of O3 and indirectly from the transport of NOy . Direct transport of O3 from the stratosphere accounts for 78 percent of O3 in the Arctic UT with maximum contributions occurring from March to May. The stratospheric contribution decreases significantly in the MT/LT (20.25 percent of total O3) and shows a very weak March.April maximum. Our NOx budget analysis in the Arctic UT shows that during spring and summer, the stratospheric injection of NO y-rich air increases NOx concentrations above the 20 pptv threshold level, thereby shifting the Arctic UT from a regime of net photochemical ozone loss to one of net production with rates as high as +16 ppbv/month.

Liang, Q.↗

NASA NTRS2010

Earth Glint Observations Conducted During the Deep Impact Spacecraft Flyby

We describe observations of Earth conducted using the High Resolution Instrument (HRI) - a 0.3 m f/35 telescope - on the Deep Impact (DI) spacecraft during its recent flybys. Earth was observed on five occasions: 2008-Mar-18 18:18 UT, 2008-May-28 20:05 UT, 2008-Jun-4 16:57 UT, 2009-Mar-27 16:19 and 2009-Oct-4 09:37 UT. Each set of observations was conducted over a full 24-hour rotation of Earth and a total of thirteen NIR spectra were taken on two-hour intervals during each observing period. Photometry in the 450, SSO, 650 and 8S0 nm filters was taken every fifteen minutes and every hour for the 350, 750 and 950 nm filters. The spacecraft was located over the equator for the three sets of observations in 2008, while the 2009- Mar and 2009-Oct were taken over the north and south Polar Regions, respectively. Observations of calibrator stars Canopus and Achernar were conducted on multiple occasions through all filters. The observations detected a strong specular glint not necessarily associated with a body of water. We describe spectroscopic characterization of the glint and evidence for the possibility of detection of reflection from high cirrus clouds. We describe implications for observations of extrasolar planets.

Barry, R. K.↗

NASA NTRS2011

Why Atens Enjoy Enhanced Accessibility For Human Space Flight

In the context of human space flight (HSF), the concept of near-Earth object (NEO) accessibility is highly subjective. Whether or not a particular NEO is accessible critically depends on mass, performance, and reliability of interplanetary HSF systems yet to be designed. Such systems would certainly include propulsion and crew life support with adequate shielding from both solar flares and galactic cosmic radiation. Equally critical architecture options are relevant to NEO accessibility. These options are also far from being determined and include the number of launches supporting an HSF mission, together with whether or not consumables are to be pre-emplaced at the destination. Until the unknowns of HSF to NEOs come into clearer focus, the notion of relative accessibility is of great utility. Imagine a group of NEOs, each with nearly equal HSF merit determined from their individual characteristics relating to crew safety, scientific return, resource utilization, and planetary defense. The more accessible members of this group are more likely to be explored first. A highly accessible NEO could conceivably be deferred in favor of a less accessible HSF destination because the latter is more accessible during a programmatically desirable launch compliant mission trajectory solutions detected in association with a specific NEO. The known NEO population is then surveyed to illustrate in which regions of heliocentric semi-major axis, eccentricity, and inclination (a, e, i) space NEOs with large n values are mapped. The (a, e, i) mapping is also formatted such that membership in each of four NEO orbit classifications, as defined below, is evident. Amors have orbits everywhere superior to (outside of) Earth's. An Amor is therefore defined to have perihelion between 1.017 astronomical units (AU) and the maximum NEO value of 1.3 AU. As of 0 hrs Universal Time on 1 January 2011 (UT epoch 2011.0), Amors numbered 2855 in the Jet Propulsion Laboratory (JPL) Small-Body Database (SBDB), comprising 37.7% of known NEOs. Apollos have orbits crossing Earth's with periods greater than Earth's. An Apollo is therefore defined to have perihelion less than 1.017 AU and a greater than 1.0 AU. As of 2011.0 UT, Apollos numbered 4080 in the SBDB, comprising 53.9% of known NEOs. Atens have orbits crossing Earth's with periods less than Earth's. An Aten is therefore defined to have aphelion greater than 0.983 AU and a less than 1.0 AU. As of 2011.0 UT, Atens numbered 618 in the SBDB, comprising 8.2% of known NEOs. Atiras have orbits everywhere inferior to (inside of) Earth's. An Atira is therefore defined to have aphelion less than 0.983 AU. As of 2011.0 UT, Atiras numbered 11 in the SBDB, comprising 0.1% of known NEOs. It is no surprise that the largest n values are chiefly associated with Apollos and Atens. Because these orbits cross Earth's, distance to be covered in a given round trip mission time delta-t can be far less than is possible for Amors or Atiras . This delta-t or the sum of mission propulsive impulse magnitudes delta-v can more frequently be minimized to enhance NHATS compliance for Apollos and Atens than is generally the case for Amors and Atiras. A less intuitive trend in NHATS results is that Atens nearly outnumber the more numerous Apollos among the most compliant NEOs as measured by n. This trend is completely out of proportion to the degree Atens are represented among the known NEO population. A theory based on geocentric NEO dynamics is presented by this paper to explain why Atens enjoy inherently greater accessibility than do Apollos. Another trend evident from mapping into (a, e, i) space is the dearth of known NEOs at low e when a < 1 AU. Underrepresentation of Atens and Atiras in the NEO catalog is at least in part attributable to observing exclusively from a perspective near Earth. Generally inferior Aten and Atira orbits are rarely, if ever, in Earth's night sky. Until a comprehensive NEO survey is conducted from an appropriateegion remote from Earth, the theory developed in this paper indicates a substantial fraction of the most accessible NEOs will remain unknown. season. Such a season is really yet another undetermined HSF architecture option. A launch season's duration will likely be measured in weeks, and it will be utilized at an indeterminate point almost certainly more than a decade in the future when HSF programmatic maturity is sufficient. Furthermore, current knowledge of the NEO population relevant to HSF is far from complete. In the 100-m-diameter class of greatest interest, only a few percent of the estimated NEO population is known [2, Figure 2.4]. Therefore, any known, lost, or fictitious NEO in a highly accessible orbit is a potential HSF destination of merit. Even if lost, fictitious, small, or hazardous, such a potential target (or another in a similar orbit) may ultimately prove to be an early HSF destination when the pertinent NEO population is more thoroughly catalogued and NEO orbits are more thoroughly maintained at high accuracy. This paper first reviews methodology and pertinent results from NASA-sponsored research performed in late 2010 and dubbed NEO HSF Accessible Targets Study (NHATS, pronounced as "gnats"). A useful accessibility metric developed during this study is n, the tally of NHATS-

Barbee, Brent↗

NASA NTRS2017

Detection and Interpretation of Long-lived X-Ray Quasi-Periodic Pulsations in the X-Class Solar Flare on 2013 May 14

Quasi-periodic pulsations (QPP) seen in the time derivative of the GOES soft X-ray light curves are analyzed for the X3.2 event on 2013 May 14. The pulsations are apparent for a total of at least two hours from the impulsive phase to well into the decay phase, with a total of 163 distinct pulses evident to the naked eye. A wavelet analysis shows that the characteristic timescale of these pulsations increases systematically from approx. 25 s at 01:10 UT, the time of the GOES peak, to approx. 100 s at 02:00 UT. A second ridge in the wavelet power spectrum, most likely associated with flaring emission from a different active region, shows an increase from approx. 40 s at 01:40 UT to approx. 100 s at 03:10 UT. We assume that the QPP that produced the first ridge result from vertical kink-mode oscillations of the newly formed loops following magnetic reconnection in the coronal current sheet. This allows us to estimate the magnetic field strength as a function of altitude given the density, loop length, and QPP timescale as functions of time determined from the GOES light curves and Ramaty High Energy Solar Spectroscopic Imager (RHESSI) images. The calculated magnetic field strength of the newly formed loops ranges from approx. 500 G at an altitude of 24Mm to a low value of approx. 10 G at 60 Mm, in general agreement with the expected values at these altitudes. Fast sausage-mode oscillations are also discussed and cannot be ruled out as an alternate mechanism for producing the QPP.

Dennis, Brian R.↗

NASA NTRS2018

Nitrogen Oxides in the Global Upper Troposphere: Interpreting Cloud-Sliced NO2 Observations from the OMI Satellite Instrument

Nitrogen oxides (NOx≡NO+NO2) in the upper troposphere (UT) have a large impact on global tropospheric ozone and OH (the main atmospheric oxidant). New cloud-sliced observations of UT NO2 at 450–280 hPa (∼6–9 km) from the Ozone Monitoring Instrument (OMI) produced by NASA and the Royal Netherlands Meteorological Institute (KNMI) provide global coverage to test our understanding of the factors controlling UT NOx. We find that these products offer useful information when averaged over coarse scales (20°×32°, seasonal), and that the NASA product is more consistent with aircraft observations of UT NO2. Correlation with Lightning Imaging Sensor (LIS) and Optical Transient Detector (OTD) satellite observations of lightning flash frequencies suggests that lightning is the dominant source of NOx to the upper troposphere except for extratropical latitudes in winter. The NO2 background in the absence of lightning is 10–20 pptv. We infer a global mean NOx yield of 280±80 moles per lightning flash, with no significant difference between the tropics and midlatitudes, and a global lightning NOx source of 5.9±1.7 Tg N a(exp −1). There is indication that the NOx yield per flash increases with lightning flash footprint and with flash energy.

Marais, Eloise A.↗

NASA NTRSDate not supplied

In-Situ Detection of Process-Induced Porosity During Cure of Out-of-Autoclave Composites

Composite materials offer unique benefits in aerospace applications, including high strength-to-weight ratio, and are becoming increasingly used by industry manufacturers. Current manufacturing and processing methods can lead to defects in the composites, which are identified after fabrication using inspection methods. This study utilized a high-temperature ultrasonic inspection system to detect process-induced porosity in an out-of-autoclave (OOA) composite panel during cure. In order to perform ultrasonic scans in-situ during cure, the system needed to be able to operate at oven temperatures up to 200 °C. There are no commercially available ultrasonic scanning systems that can operate continuously at these temperatures, so an enclosure was fabricated to insulate the ultrasonic system in the curing oven. The enclosure housed a MISTRAS® motorized X-Y raster scanner and contact transducer (Olympus® X2002). The Olympus® X2002 contact transducer is a continuous high-temperature delay line transducer with a center frequency of 2.25 MHz. In order to prevent the inside of the enclosure from reaching high temperatures, a sparge pipe inside the cooling enclosure was connected to a liquid nitrogen (LN2) tank outside of the oven via insulated hoses. The cooling system was automatically controlled by a temperature controller that was programmed to open a solenoid valve along the hose at 31 ℃ and close at 28 ℃ inside the cooling enclosure. When the solenoid valve was open, LN2 would flow from the LN2 tank and vaporize prior to reaching cooling enclosure. A U-shaped sparge pipe had holes drilled along its length to uniformly introduce cold nitrogen gas into the cooling enclosure. This prevented the motors from ever reaching the maximum desired operating temperature of 38 ℃. In the bottom of the enclosure, the tool plate was placed with the composite facing the outside of the enclosure, exposing it to the temperatures of the oven. The tool plate was 63.5 mm thick borosilicate glass, which was chosen for its low ultrasonic attenuation and moderate thermal conductivity. A thin layer of ultrasonic couplant was placed on the tool plate. The transducer sent and received ultrasonic waves through the tool plate into the composite. A MISTRAS® Remote UT System performed all wave generation, analog to digital conversion, and data acquisition and processing. The transducer was connected directly to the Remote UT System via a high-temperature BNC cable (CD International, RG-316). Polyimide insulated copper wire was used to connect the scanner to a 2-axis motor drive, which was connected to the Remote UT System. The motor drive and Remote UT System were located outside the industrial oven. A diagram of the ultrasonic system is shown in Figure 1. Figure 1: Diagram of ultrasonic in-situ defect detection system. In this study, a porosity gradient was introduced into the carbon fiber reinforced polymer (CFRP) composite through a misfit of the part and caul plate. A 24-ply quasi-isotropic ([0/90, ±45]12S) composite panel was laid up using Newport® AS4C-M/NB321 out-of-autoclave (OOA) plain weave (PW) prepreg (42% resin content, 195 g/m2). The first 16 plies were 203 mm × 203 mm. Ply drops were incorporated into the panel by decreasing the length of plies 17-24. The sizes of each ply are included in Table 1. All plies were centered along their length (x-axis) creating a trapezoidal type cross-section. Table 1: Ply sizes Plies Length (mm) Width (mm) 1-16 203 203 17-18 102 203 19-20 85 203 21-22 68 203 23-24 51 203 A 15-5 stainless steel caul plate (Size: 203 × 203 × 1.2 mm) was placed on the laminate. The composite and caul plate were vacuum bagged to the tool plate. Per the product datasheet, Newport 321 can be cured between 121 °C and 149 °C, depending on service temperature, with a hold for 90-120 minutes. Based on prior thermal testing of the cooling enclosure, the desired composite temperature cycle could be attained when the air temperature of the oven was ramped to 160 °C at a rate of 1.7 °C/min with a 3 hour hold. The extended hold was not necessary to cure the composite, but did allow for additional scans at the cure temperature during preliminary testing. The composite panel was under vacuum pressure for the entire cure cycle. Under vacuum, the caul plate deformed causing high and low pressure regions. The low-pressure regions formed high porosity in the composite part. The ultrasonic data collected showed that the inspection system was able to monitor the evolution of porosity within the composite throughout the cure cycle. Fifty scans of a 203 mm × 51 mm (8 in. × 2 in.) area of the composite were completed throughout the cure cycle. The scan speed was set to 43 mm/s in the x-direction and 36 mm/s in the y-direction, with a 1.0 mm/pixel resolution in both directions. Each scan took approximately five minutes to complete. Figure 2 shows C-scan amplitude data (top view) from one scan during the cure cycle. The color map indicates the maximum amplitude (%) measured with a time gate that contains reflections from the back surface (furthest from the transducer in contact with the caul plate) of the composite. Because porosity in the composite increases the ultrasonic attenuation in the composite part, a higher amplitude (red) indicates low porosity and a lower amplitude (blue) indicates high porosity. The regions where the caul plate was applying increased pressure (center and ends of the panel) resulted in reduced porosity, whereas the ply drop regions had reduced pressure and thus had higher porosity. Figure 2: Amplitude C-scan (top view) of OOA composite from one scan during the 160 °C temperature hold. Higher amplitude (red) indicates low porosity. Lower amplitude (blue) indicates high porosity. A B-scan is a two-dimensional image plotting the ultrasonic signals from a single y-position at every x-location of the composite panel. The travel time (μs) of the ultrasonic wave (representing the through-thickness location) is plotted along the y-axis, and the ultrasonic wave signal is represented as a contour map. Based on the B-scan data, the location of the defects with respect to the composite thickness was able to be determined. The ply drop regions had high porosity near the front (tool plate) surface of the composite (Figure 3). Figure 3: B-scan (cross-section view) of OOA composite from one scan during the 160 °C temperature hold. Using the data obtained from amplitude C-scans and B-scans throughout the cure cycle, the high and low porosity regions within the composite laminate were detected and localized with high spatial resolution. This paper will discuss the evolution of porosity content in the OOA composite during cure. OOA tests aided the transition of this system to an autoclave, which is the primary method of curing aerospace-grade thermoset composites.

Tyler B. Hudson↗

NASA NTRS2020

A Double Disturbed Lunar Plasma Wake

Under nominal solar wind conditions, a tenuous wake forms downstream of the lunar nightside. However, the lunar plasma environment undergoes a transformation as the Moon passes through the Earth's magnetotail, with hot subsonic plasma causing the wake structure to disappear. We investigate the lunar wake response during a passing coronal mass ejection (CME) on March 8, 2012 while crossing the Earth's magnetotail using both a magnetohydrodynamic (MHD) model of the terrestrial magnetosphere and a three-dimensional hybrid plasma model of the lunar wake. The CME arrives at 1 AU around 10:30 UT and its impact is first detected inside the geomagnetic tail after 11:10 UT by the Acceleration, Reconnection, Turbulence and Electrodynamics of the Moon's Interaction with the Sun (THEMIS-ARTEMIS) satellites in lunar orbit. A global magnetospheric MHD simulation using Wind data for upstream conditions with the OpenGGCM model reveals the magnetosheath compression to the lunar position from 11:20–12:00 UT, accompanied by multiple flux rope or plasmoid-like features developing and propagating tailward. MHD results support plasma changes observed by the THEMIS-ARTEMIS satellites. Lunar-scale simulations using the Amitis hybrid code show a short and misaligned plasma wake during the Moon's brief entry into the magnetosheath at 11:20 UT, with plasma expansion into the void being aided by the higher plasma temperatures. Sharply accelerated flow speed and a compressed magnetic field lead to an enhanced electric field in the lunar wake capable of generating sudden changes to the nightside near-surface electric potential.

A. P. Rasca↗