Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Topological defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Evidence of topological charge polarization at active-passive interfaces in acoustically powered active liquid crystals

Theoretical and computational studies predict topological charge separation at active-passive interfaces in active nematics, but reliable experimental validation has been lacking. We utilize a synthetic acoustically energized liquid crystal to experimentally investigate the dynamics of topological defects across an active-passive interface. The interference pattern induced by the acoustic wave inside the experimental cell creates a spatial distribution of activity, resulting in the formation of active-passive interfaces with the liquid-crystalline director field aligned parallel to those interfaces. The activity gradient drives the reorientation of positively charged topological defects along its direction, causing them to migrate into the passive zone and form a layer with net topological charge. That layer “discharges” upon cessation of activity through annihilation of positive and negative topological charges, resembling the discharge of a capacitor.

Active defects↗
DOE OSTI2021

The mesoscale order of nacreous pearls

A pearl’s distinguished beauty and toughness are attributable to the periodic stacking of aragonite tablets known as nacre. Nacre has naturally occurring mesoscale periodicity that remarkably arises in the absence of discrete translational symmetry. Gleaning the inspiring biomineral design of a pearl requires quantifying its structural coherence and understanding the stochastic processes that influence formation. By characterizing the entire structure of pearls (~3 mm) in a cross-section at high resolution, we show that nacre has medium-range mesoscale periodicity. Self-correcting growth mechanisms actively remedy disorder and topological defects of the tablets and act as a countervailing process to long-range disorder. Nacre has a correlation length of roughly 16 tablets (~5.5 µm) despite persistent fluctuations and topological defects. For longer distances (>25 tablets ~8.5 µm), the frequency spectrum of nacre tablets follows f –1.5 behavior, suggesting that growth is coupled to external stochastic processes—a universality found across disparate natural phenomena, which now includes pearls.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fabrication of Arrays of Topological Solitons in Patterned Chiral Liquid Crystals for Real-Time Observation of Morphogenesis

Topological solitons have knotted continuous field configurations embedded in a uniform background, and occur in cosmology, biology, and electromagnetism. However, real-time observation of their morphogenesis and dynamics is still challenging because their size and timescale are enormously large or tiny. Liquid crystal (LC) structures are promising candidates for a model-system to study the morphogenesis of topological solitons, enabling direct visualization due to the proper size and timescale. We report a new way is found to rationalize the real-time observation of the generation and transformation of topological solitons using cholesteric LCs confined in patterned substrates. The experimental demonstration shows the topologically protected structures arise via the transformation of topological defects. Numerical modeling based on minimization of free energy closely reconstructs the experimental findings. The fundamental insights obtained from the direct observations pose new theoretical challenges in understanding the morphogenesis of different types of topological solitons within a broad range of scales.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Emergent electric field induced by dissipative sliding dynamics of domain walls in a Weyl magnet

The dynamic motion of topological defects in magnets induces an emergent electric field, as exemplified by the continuous flow of skyrmion vortices. However, the electrodynamics underlying this emergent field remains poorly understood. In this context, magnetic domain walls—one-dimensional topological defects with two collective modes, sliding and spin-tilt—offer a promising platform for exploration. Here we demonstrate that the dissipative motion of domain walls under oscillatory current excitation generates an emergent electric field. We image domain patterns and quantify the domain-wall length under applied magnetic fields in mesoscopic devices based on the magnetic Weyl semimetal NdAlSi. These devices exhibit exceptionally strong domain-wall scattering and a pronounced emergent electric field, as observed in the imaginary component of the complex impedance. Spin dynamics simulations reveal that domain-wall sliding dominates over spin-tilting, in which the phase delay of the domain-wall motion with respect to the driving force impacts the emergent electric field. Our findings establish domain-wall dynamics as a platform for studying emergent electromagnetic fields and motivate further investigations of the coupled motion of magnetic solitons and conduction electrons.

Yamada, Rinsuke [The University of Tokyo, Japan]↗
DOE OSTI2025

Fractional magnetic charges and channeling of Faraday lines by disclinations in artificial spin ice

We have studied the magnetic moments of artificial spin ice arrays of nanomagnets in both undistorted square arrays and in arrays with a topological defect induced by a single disclination. We confirm that the disclination induces global, macroscopic changes in the low-energy collective states of the nanomagnet moment configuration. Specifically, the disclination leads to Faraday lines of effective magnetic flux that run from the center all the way to the edge of the arrays. Moreover, the geometric deformation, induced by the topological defect, curves the geometry such that these Faraday lines are channeled preferentially by the arrays’ curved geometry. Our results demonstrate how the intentional combination of topology and geometry can be designed to control magnetic charges and the flow of local magnetization and thus manipulate associated collective excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Kibble–Zurek mechanism of Ising domains

The formation of topological defects after a symmetry-breaking phase transition is an overarching phenomenon that encodes the underlying dynamics. The Kibble-Zurek mechanism (KZM) describes these non-equilibrium dynamics of second-order phase transitions and predicts a power-law relationship between the cooling rates and the density of topological defects. It has been verified as a successful model in a wide variety of physical systems, including structure formation in the early Universe and condensed-matter materials. However, it is uncertain if the KZM mechanism is also valid for topologically trivial Ising domains, one of the most common and fundamental types of domain in condensed-matter systems. Here we show that the cooling rate dependence of Ising domain density follows the KZM power law in two different three-dimensional structural Ising domains: ferro-rotation domains in NiTiO 3 and polar domains in BiTeI. However, although the KZM slope of NiTiO 3 agrees with the prediction of the 3D Ising model, the KZM slope of BiTeI exceeds the theoretical limit, providing an example of steepening KZM slope with long-range dipolar interactions. Finally, our results demonstrate the validity of KZM for Ising domains and reveal an enhancement of the power-law exponent for transitions of non-topological quantities with long-range interactions. The Kibble-Zurek mechanism is shown to apply to structural Ising domains in three-dimensional materials. Long-range interactions modify the critical exponents away from theoretical predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Defect Spirograph: Dynamical Behavior of Defects in Spatially Patterned Active Nematics

We report that topological defects in active liquid crystals can be confined by introducing gradients of activity. Here, we examine the dynamical behavior of two defects confined by a sharp gradient of activity that separates an active circular region and a surrounding passive nematic material. Continuum simulations are used to explain how the interplay among energy injection into the system, hydrodynamic interactions, and frictional forces governs the dynamics of topologically required self-propelling + 1/2 defects. Our findings are rationalized in terms of a phase diagram for the dynamical response of defects in terms of activity and frictional damping strength. Different regions of the underlying phase diagram correspond to distinct dynamical modes, namely immobile defects, steady rotation of defects, bouncing defects, bouncing-cruising defects, dancing defects, and multiple defects with irregular dynamics. These dynamic states raise the prospect of generating synchronized defect arrays for microfluidic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantum field theory of topological spin dynamics

Here, we develop a field theory of quantum magnets and magnetic (semi)metals, which is suitable for the analysis of their universal and topological properties. The systems of interest include collinear, coplanar, and general noncoplanar magnets. At the basic level, we describe the dynamics of magnetic moments using smooth vector fields in the continuum limit. Dzyaloshinskii-Moriya interaction is captured by a non-Abelian vector gauge field, and chiral spin couplings related to topological defects appear as higher-rank antisymmetric tensor gauge fields. We distinguish type-I and type-II magnets by their equilibrium response to the non-Abelian gauge flux, and characterize the resulting lattices of skyrmions and hedgehogs, the spectra of spin waves, and the chiral response to external perturbations. The general spin-orbit coupling of electrons is similarly described by non-Abelian gauge fields, including higher-rank tensors related to the electronic Berry flux. Itinerant electrons and local moments exchange their gauge fluxes through Kondo and Hund interactions. Hence, by utilizing gauge fields, this theory provides a unifying physical picture of “intrinsic” and “topological” anomalous Hall effects, spin-Hall effects, and other correlations between the topological properties of electrons and moments. We predict “topological” magnetoelectric effect in materials prone to hosting hedgehogs. Links to experiments and model calculations are provided by deriving the couplings and gauge fields from generic microscopic models, including the Hubbard model with spin-orbit interactions. Much of the formal analysis is generalized to d spatial dimensions in order to access the $π_{d–1}(S^{d–1})$ homotopy classification of the magnetic hedgehog topological defects, and establish the possibility of novel quantum spin liquids that exhibit a fractional magnetoelectric effect. However, we emphasize the form of all results in the physically relevant $\textit{d}$ = 3 dimensions, and discuss a few applications to topological magnetic conductors like Mn 3 Sn and Pr 2 Ir 2 O 7 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Organizing bacterial vortex lattices by periodic obstacle arrays

Recent experiments have shown that the complex spatio-temporal vortex structures emerging in active fluids are susceptible to weak geometrical constraints. This observation poses the fundamental question of how boundary effects stabilize a highly ordered pattern from seemingly turbulent motion. Here we show, by a combination of continuum theory and experiments on a bacterial suspension, how artificial obstacles guide the flow profile and reorganize topological defects, which enables the design of bacterial vortex lattices with tunable properties. To this end, the continuum model is extended by appropriate boundary conditions. Beyond the stabilization of square and hexagonal lattices, we also provide a striking example of a chiral, antiferromagnetic lattice exhibiting a net rotational flow, which is induced by arranging the obstacles in a Kagome-like array. Recent experiments showed that weak geometrical constraints can organize topological defects in turbulent bacterial suspensions. Here, the authors use a continuum model to study the connection between symmetry and stability of emergent vortex patterns and the geometry of constraining pillar arrays.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

In Situ Nanoscale Dynamics Imaging in a Proton‐Conducting Solid Oxide for Protonic Ceramic Fuel Cells

Abstract Hydrogen fuel cells and electrolyzers operating below 600 °C, ideally below 400 °C, are essential components in the clean energy transition. Yttrium‐doped barium zirconate BaZr 0.8 Y 0.2 O 3‐d (BZY) has attracted a lot of attention as a proton‐conducting solid oxide for electrochemical devices due to its high chemical stability and proton conductivity in the desired temperature range. Grain interfaces and topological defects modulate bulk proton conductivity and hydration, especially at low temperatures. Therefore, understanding the nanoscale crystal structure dynamics in situ is crucial to achieving high proton transport, material stability, and extending the operating range of proton‐conducting solid oxides. Here, Bragg coherent X‐ray diffractive imaging is applied to investigate in situ and in 3D nanoscale dynamics in BZY during hydration over 40 h at 200 °C, in the low‐temperature range. An unexpected activity of topological defects and subsequent cracking is found on a nanoscale covered by the macroscale stability. The rearrangements in structure correlate with emergent regions of different lattice constants, suggesting heterogeneous hydration. The results highlight the extent and impact of nanoscale processes in proton‐conducting solid oxides, informing future development of low‐temperature protonic ceramic electrochemical cells.

25 ENERGY STORAGE↗
DOE OSTI2025

Insights into distorted lamellar phases with small-angle scattering and machine learning

Lamellar phases are essential in various soft matter systems, with topological defects significantly influencing their mechanical properties. In this report, we present a machine-learning approach for quantitatively analyzing the structure and dynamics of distorted lamellar phases using scattering techniques. By leveraging the mathematical framework of Kolmogorov–Arnold networks, we demonstrate that the conformations of these distorted phases – expressed as superpositions of complex waves – can be reconstructed from small-angle scattering intensities. Through the contour analysis of wave field phase singularities, we obtain the statistics of the spatial distribution of topological defects. Furthermore, we establish that the temporal evolution of these defects can be derived from the time-dependent traveling wave field, informed by the dispersion relation of spectral components. This method opens new avenues for investigating the dynamics of distorted lamellar phases using various dynamic scattering techniques such as neutron spin echo and X-ray photon correlation spectroscopy. These findings enhance our microscopic understanding of how defects influence the physical properties of lamellar materials, with implications for both equilibrium and non-equilibrium states in general lamellar systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evidence for nitrogen binding to surface defects for topological insulator Bi 2 Se 3

Using scanning tunneling spectroscopy and theoretical simulations we have studied the effects of nitrogen gas exposure on the electronic density of states of Bi 2 Se 3 , a well-studied topological insulator. In carefully controlled measurements, Bi 2 Se 3 crystals were initially cleaved in a helium gas environment and then exposed to a 22 SCFH flow of ultra-high purity N 2 gas. We observe a resulting change in the spectral curves, with the exposure effect saturating after approximately 50 min, ultimately bringing the Dirac point about 50 meV closer to the Fermi level. Furthermore, these results are compared to density functional theory calculations, which support a picture of N 2 molecules physisorbing near Se vacancies. Furthermore, ab initio molecular dynamics simulations aided by a Blue Moon ensemble method reveal the dissociative adsorption of N 2 molecules which then bind strongly to Se vacancies at the surface. In this scenario, the binding of the N atom to a Se vacancy site removes the surface defect state created by the vacancy and changes the position of the Fermi energy with respect to the Dirac point.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nematic Colloidal Micro‐Robots as Physically Intelligent Systems

Abstract Physically intelligent micro‐robotic systems exploit information embedded in micro‐robots, their colloidal cargo, and their milieu to interact, assemble, and form functional structures. Nonlinear anisotropic fluids such as nematic liquid crystals (NLCs) provide untapped opportunities to embed interactions via their topological defects, complex elastic responses, and ability to dramatically restructure in dynamic settings. Here a four‐armed ferromagnetic micro‐robot is designed and fabricated to embed and dynamically reconfigure information in the nematic director field, generating a suite of physical interactions for cargo manipulation. The micro‐robot shape and surface chemistry are designed to generate a nemato‐elastic energy landscape in the domain that defines multiple modes of emergent, bottom‐up interactions with passive colloids. Micro‐robot rotation expands the ability to sculpt interactions; the energy landscape around a rotating micro‐robot is dynamically reconfigured by complex far‐from‐equilibrium dynamics of the micro‐robot's companion topological defect. These defect dynamics allow transient information to be programmed into the domain and exploited. Robust micro‐robotic manipulation strategies are demonstrated that exploit these diverse modes of nemato‐elastic interaction to achieve cargo docking, transport, release, and assembly of complex reconfigurable structures at multi‐stable sites. Such structures are of great interest to future developments of LC‐based advanced optical device and micro‐manufacturing in anisotropic environments.

Yao, Tianyi↗
DOE OSTI2024

Lieb-Schultz-Mattis anomalies as obstructions to gauging (non-on-site) symmetries

We study ’t Hooft anomalies of global symmetries in 1+1d lattice Hamiltonian systems. We consider anomalies in internal and lattice translation symmetries. We derive a microscopic formula for the “anomaly cocycle” using topological defects implementing twisted boundary conditions. The anomaly takes value in the cohomology group H^3(G,U(1)) × H^2(G,U(1)) H 3 ( G , U ( 1 ) ) × H 2 ( G , U ( 1 ) ) . The first factor captures the anomaly in the internal symmetry group G, and the second factor corresponds to a generalized Lieb-Schultz-Mattis anomaly involving G and lattice translation. We present a systematic procedure to gauge internal symmetries (that may not act on-site) on the lattice. We show that the anomaly cocycle is the obstruction to gauging the internal symmetry while preserving the lattice translation symmetry. As an application, we construct anomaly-free chiral lattice gauge theories. We demonstrate a one-to-one correspondence between (locality-preserving) symmetry operators and topological defects, which is essential for the results we prove. We also discuss the generalization to fermionic theories. Finally, we construct non-invertible lattice translation symmetries by gauging internal symmetries with a Lieb-Schultz-Mattis anomaly.

Physics↗
DOE OSTI2026

Two-dimensional non-equilibrium melting of charged colloids

Thermodynamic two-dimensional melting has been extensively studied in experiments and simulations, and is well predicted by theory. For systems in equilibrium, this transition is well described by the Kosterlitz–Thouless–Halperin–Nelson–Young theory, where melting is directly linked to the unbinding of topological defects. For driven, non-equilibrium melting and other non-equilibrium phase transitions, the picture is less clear. Here, in this work, we study the two-dimensional melting of a crystal of charged colloids. By randomly replacing some charged colloids with magnetic colloids, we can melt our system by rotating a fraction of the particles to create non-equilibrium, hydrodynamic random flows and local stresses. We can also melt it thermally by changing the particle number density. We find that an effective temperature approach cannot explain the results of our driven system. Rather, in both experiments and simulations, we observe that plotting the hexatic order parameter and the hexatic correlation’s exponent versus the density of disclinations and dislocations, respectively, yields universal curves. This implies that in our systems, two-dimensional melting depends directly on the density of topological defects and is independent of whether thermal or non-equilibrium forces generate them.

critical phenomena↗
DOE OSTI2025

Modeling active nematics via the nematic locking principle

Active nematic systems consist of rod-like internally driven subunits that interact with one another to form large-scale coherent flows. They are important examples of far-from-equilibrium fluids, which exhibit a wealth of nonlinear behavior. This includes active turbulence, in which topological defects in the nematic order braid around one another in a chaotic fashion. One of the most studied examples of active nematics consists of a dense two-dimensional layer of microtubules, crosslinked by kinesin molecular motors that inject extensile deformations into the fluid. Though numerous theoretical studies have modeled microtubule-based active nematics, no consensus has emerged on how to fully and quantitatively capture the features of the experimental system. Here, to better understand the theoretical foundations for modeling this system, we propose a fundamental principle we call the nematic locking principle—individual microtubules cannot rotate without all neighboring microtubules also rotating. Physically, this is justified by the high density of the microtubules, their elongated nature, and their corresponding steric interactions. We assert that the nematic locking principle holds throughout the majority of the material, but breaks down in the neighborhood of topological defects and other regions of low density. We derive the most general nematic transport equation consistent with this principle and also derive the most general term that violates it, introducing fracturing into the material. We then examine the standard Beris–Edwards approach, commonly used to model this system, and show that it violates the nematic locking principle throughout the majority of the material due to fracturing. We then propose a modification to the Beris–Edwards model that enforces nematic locking nearly everywhere. This modification shuts off fracturing except in regions where the order parameter (a proxy for density) is reduced. In these regions fracturing is turned on. The resulting simulations in turn show strong nematic locking throughout the bulk of the material, with narrow bands of fracturing, consistent with experimental observation. One additional advantage of enforcing nematic locking is that nontrivial stationary state solutions, common in Beris–Edwards simulations but not seen in experiments, are eliminated.

Mitchell, Kevin A. [Univ. of California, Merced, C↗