SEARCH · Engineering Papers

Results for “TmS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Space Station thermal management system development status and plans

The manned Space Station, as currently designed, contains a baseline thermal management system (TMS) which uses components and subsystems never before employed in manned spacecraft. The basis for the technology used in the TMS design is the result of a long-term TMS Technology Development Plan which was initiated in 1979. Rankin and Marshall (1983) have discussed the history and progress of that plan from its beginnings to early 1983. The present paper is concerned with the status of activities conducted at the NASA Lyndon B. Johnson Space Center (JSC) under this plan since 1983, taking into account also a summary of activities planned for the next several years.

Rankin, J. G.↗

NASA NTRS1986

Lithologic mapping in a forested region using remotely sensed data

Forest canopies over different sedimentary lithologies of valleys and ridges are composed of different dominant species and have significantly different reflectance and emittance. In a botanical survey of eighty-seven forest sites, sedimentary lithologies were found to differ in the species which dominate the forest canopy. Sandstone sites had abundant chestnut oak (Quercus prinus), black oak (Q. velutina), and northern red oak (Q. rubra). On shale sites chestnut oak, white oak (Q. alba), northern red oak and red pine (Pinus resinosa) were dominant. Limestone sites had a variable species composition with the most common species, northern red oak, white oak, and black locust (Robinia pseudocacia) accounting for only 30 percent of the total trees. Thematic Mapper Simulator (TMS) data obtained during the growing season were analyzed to determine if sandstones, shales, and limestones could be distinguished on the basis of forest-canopy reflectance. The observations compared in the analysis were means of the eight TMS bands for 10 x 10-pixel test sites selected from areas with complete canopy closure. In August imagery the three lithologies were separable based on differences in TMS band 3 (630-690 nm) and band 8 (10.4-12.5 microns).

Masuoka, E.↗

NASA NTRS1992

A high-fidelity batch simulation environment for integrated batch and piloted air combat simulation analysis

A batch air combat simulation environment known as the Tactical Maneuvering Simulator (TMS) is presented. The TMS serves as a tool for developing and evaluating tactical maneuvering logics and to evaluate the tactical implications of perturbations to aircraft performance or supporting systems. The TMS is capable of simulating air combat between any number of engagement participants, with practical limits imposed by computer memory and processing power. Aircraft are modeled using equations of motion, control laws, aerodynamics and propulsive characteristics, and databases representative of a modern high-performance aircraft with and without thrust-vectoring capability are included. A Tactical Autopilot is implemented in the aircraft simulation model to convert guidance commands issued by computerized maneuvering logics in the form of desired angle-of-attack and wind axis-bank angle into inputs to the inner-loop control augmentation system of the aircraft.

Goodrich, Kenneth H.↗

NASA NTRS2020

Multidisciplinary Systems Analysis of a Six Passenger Quadrotor Urban Air Mobility Vehicle Powertrain

There is a high degree of research interest in the design space for electric vertical takeoff and landing (eVTOL) vehicles, because these vehicles are seen as key enablers for urban air mobility (UAM). This work further explores the eVTOL design space, by presenting analysis of a six-passenger eVTOL quadrotor powertrain, with integrated power, propulsion, and thermal management systems modeled using the Numerical Propulsion System Simulation (NPSS) and the NPSS Power System Library. Four architectures are modeled at the same design point and compared over a design mission. Results from an architecture comparison study show that a hybrid architecture performs best in terms of cruise range, however, the hybrid needs batteries with high specific energy and specific power in order to obtain a benefit vs turboelectric architectures. Sensitivity studies are conducted to show correlations between component parameters and system metrics. This data provides useful indicators for further technological improvement. Lastly, an initial TMS model is presented, and sensitivity studies on TMS design parameters are presented as well, to show high level TMS design trends.

electrified propulsion↗

NASA NTRSDate not supplied

Multidisciplinary Systems Analysis of a Six Passenger Quadrotor Urban Air Mobility Vehicle Powertrain

evtol↗

NASA NTRSDate not supplied

Thermal Management System Sizing and Mission Analysis for the SUSAN Electrofan Aircraft

This paper will detail the design, sizing, and mission analysis for the thermal management system (TMS) for the Subsonic Single Aft eNgine (SUSAN) aircraft. Previous work has defined key performance parameters (KPPs) for the electrical power system on SUSAN. These KPPs, efficiency and specific power, were assigned values for each power system component at minimum, nominal, and maximum levels of technology development. The values were based on NASA’s research in Electrified Aircraft Propulsion (EAP) technology. A similar approach was taken in this work, defining and assigning values for KPPs for each component of the TMS. These KPPs are used as inputs to the TMS analysis and sizing and establish targets for future technology development. The minimum level is based on the current state of the art, using available data on commercial off-the-shelf products from suppliers, datasheets, or testing. The nominal level is based on recent published research and on-going NASA-funded work. The maximum level represents a projection of technology performance into the future.

Electrified Aircraft↗

NASA NTRSDate not supplied

Thermal Management Key Performance Parameter Development and System Analysis for the SUSAN Electrofan Aircraft

A set of key performance parameters (KPPs) for thermal management system (TMS) components was developed for use in system sizing and analysis. These KPPs were defined at three different levels of performance corresponding to different ranges of Technology Readiness Levels. KPP values were determined based on a large dataset that includes analysis and testing data from literature, NASA-funded research, and commercial product datasheets. These KPPs were then used to perform a TMS sizing and analysis of the SUbsonic Single Aft eNgine (SUSAN) aircraft. Total TMS mass, power consumption, and drag is quantified at each KPP level, showing decreasing trends as the level of technology improves.

thermal management↗

NASA NTRS1980

Upgrading the free flying rendezvous and docking simulator and the orbital servicer system

Recommendations are made for upgrading two teleoperator/robotics test and simulation systems based upon a review of latest technology advances in the involved disciplines. A second generation Free Flying Mobility Unit is recommended which adds a sixth degree of freedom and incorporates other improvements which greatly expand the center's capability to perform evaluation tests and demonstrations of advanced systems concepts for rendezvous and docking in support of the Teleoperator Maneuvering System (TMS) Program. The Orbital Servicer System provides the capability for testing and demonstrating concepts for on orbit servicing of compatibly designed satellites/payloads. The TMS is to be the transporting vehicle for the servicer. The manipulator arm of the Orbital service System is presently computer controlled in the trajectory portion of the module transfer operation. The ultimate objective is to fully automte its operation requiring additional capabilities in sensors, artificial intelligence, image analysis, communications, computer programming, pattern recognition, kinematics, and manipulator design. It is recommended that the Electronics and Control Laboratory move to acquire the basic competencies in robotics necessary to achieve full automation.

Eastman, R. M.↗

NASA NTRS1982

Analysis of thematic mapper simulator data collected over eastern North Dakota

The results of the analysis of aircraft-acquired thematic mapper simulator (TMS) data, collected to investigate the utility of thematic mapper data in crop area and land cover estimates, are discussed. Results of the analysis indicate that the seven-channel TMS data are capable of delineating the 13 crop types included in the study to an overall pixel classification accuracy of 80.97% correct, with relative efficiencies for four crop types examined between 1.62 and 26.61. Both supervised and unsupervised spectral signature development techniques were evaluated. The unsupervised methods proved to be inferior (based on analysis of variance) for the majority of crop types considered. Given the ground truth data set used for spectral signature development as well as evaluation of performance, it is possible to demonstrate which signature development technique would produce the highest percent correct classification for each crop type.

Anderson, J. E.↗

NASA NTRS1982

Teleoperator maneuvering system

The teleoperator maneuvering system (TMS), consisting of the vehicle, the shuttle orbiter bay cradle with airborne support equipment, and the aft flight deck control station, is described. The vehicle is a reusable remotely controlled free flying vehicle capable of a variety of missions including payload placement, retrieval, servicing, viewing, and large space systems assembly support. The TMS flies preprogrammed trajectories as well as being controlled or reprogrammed from the aft flight deck or the ground. A building block design philosophy is described which permits the evolution of capability as it is needed and delays cost as much as possible. Various mission operations are discussed.

Turner, J. R.↗

NASA NTRS1980

The use of thematic mapper simulator calibration data for assessment of data quality

In flight calibration data collected from the thematic mapper simulator (TMS) were used to assess the quality of Earth scan data. The following results are indicated: (1) based on limited samples, individual TMS channels have noise which varies from channel to channel, but remains constant within a channel; (2) short term variations of more than 5% in the average values of calibration source responses indicate problems; and (3) absolute radiometric calibration is unlikely to be meaningful in a temporal sense due to single point calibration methods used.

Forman, M. L.↗

NASA NTRS1981

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

A set of training statistics for the 30 meter resolution simulated thematic mapper MSS data was generated based on land use/land cover classes. In addition to this supervised data set, a nonsupervised multicluster block of training statistics is being defined in order to compare the classification results and evaluate the effect of the different training selection methods on classification performance. Two test data sets, defined using a stratified sampling procedure incorporating a grid system with dimensions of 50 lines by 50 columns, and another set based on an analyst supervised set of test fields were used to evaluate the classifications of the TMS data. The supervised training data set generated training statistics, and a per point Gaussian maximum likelihood classification of the 1979 TMS data was obtained. The August 1980 MSS data was radiometrically adjusted. The SAR data was redigitized and the SAR imagery was qualitatively analyzed.

Hoffer, R. M.↗

NASA NTRS1982

Evaluation of SLAR and simulated thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

Kershaw County, South Carolina was selected as the study site for analyzing simulated thematic mapper MSS data and dual-polarized X-band synthetic aperture radar (SAR) data. The impact of the improved spatial and spectral characteristics of the LANDSAT D thematic mapper data on computer aided analysis for forest cover type mapping was examined as well as the value of synthetic aperture radar data for differentiating forest and other cover types. The utility of pattern recognition techniques for analyzing SAR data was assessed. Topics covered include: (1) collection and of TMS and reference data; (2) reformatting, geometric and radiometric rectification, and spatial resolution degradation of TMS data; (3) development of training statistics and test data sets; (4) evaluation of different numbers and combinations of wavelength bands on classification performance; (5) comparison among three classification algorithms; and (6) the effectiveness of the principal component transformation in data analysis. The collection, digitization, reformatting, and geometric adjustment of SAR data are also discussed. Image interpretation results and classification results are presented.

Hoffer, R. M.↗

NASA NTRS1983

Remote sensing research for agricultural applications

The thematic mapper simulator (TMS) flown by the U-2/ER-2 aircraft is being used as a surrogate for LANDSAT-4TM data. Progress is reported on spectral data acquisition including TMS, color infrared high altitude aerial photography, and LANDSAT 3 MSS and ground data collection to support classification and testing. A test site in San Joaquin County was selected for analysis.

Colwell, R. N.↗

NASA NTRS1983

Feature selection methodologies using simulated Thematic Mapper data

The present investigation is concerned with the determination of the intrinsic dimensionality of a simulated Thematic Mapper data set. In addition, the effectiveness and sensitivity of 'standard' statistics separability measures (i.e., transformed divergence) is evaluated in comparison to eigenvectors for identifying the optimum subset of the original Thematic Mapper Simulator (TMS) bands for classifying the various cover types. TMS data were collected on May 2, 1979 by NASA's NS001 aircraft multispectral scanner over a bottomland forested area in South Carolina near the city of Camden. It is found that the eigenvectors and eigenvalues of a covariance matrix from a multispectral scanner system (MSS) data set can be obtained without having to actually transform the data.

Dean, M. E.↗

NASA NTRS1982

An evaluation of thematic mapper simulator data for mapping forest cover

Computer-aided analysis techniques applied to Thematic Mapper Simulator (TMS) data were evaluated for the purpose of mapping forest cover types. Classification results obtained using a supervised set of training statistics and various combinations of three and four channel subsets of the seven available TMS channels are compared for the L2 (Minimum Euclidean Distance), GML (Gaussian Maximum Likelihood), and SECHO (Supervised Extraction and Classification of Homogeneous Objects) classification algorithms. SECHO performed significantly better than either of the two per-point classifiers for the untransformed data. Overall classification results of the Karhunen-Loeve transformation increased for the L2 algorithm, but decreased for both the GML and SECHO algorithms.

Dean, M. E.↗

NASA NTRS1984

Feature selection and the information content of Thematic Mapper simulator data for forest structural assessment

An assessment is made of the information content of Thematic Mapper Simulator (TMS) data for the case of a forested region, in order to determine the sensitivity of such data to forest crown closure and tree size class. Principal components analysis and Monte Carlo simulation indicated that channels 4, 7, 5 and 3 were optimal for four-channel forest structure analysis. As the number of channels supplied to the Monte Carlo feature selection routine increased, classification accuracy increased. The greatest sensitivity to the forest structural parameters, which included succession within clearcuts as well as crown closure and size class, was obtained from the 7-channel TMS data.

Spanner, M. A.↗

NASA NTRS1984

Statistical analysis of Thematic Mapper Simulator data for the geobotanical discrimination of rock types in southwest Oregon

An evaluation of Thematic Mapper Simulator (TMS) data for the geobotanical discrimination of rock types based on vegetative cover characteristics is addressed in this research. A methodology for accomplishing this evaluation utilizing univariate and multivariate techniques is presented. TMS data acquired with a Daedalus DEI-1260 multispectral scanner were integrated with vegetation and geologic information for subsequent statistical analyses, which included a chi-square test, an analysis of variance, stepwise discriminant analysis, and Duncan's multiple range test. Results indicate that ultramafic rock types are spectrally separable from nonultramafics based on vegetative cover through the use of statistical analyses.

Morrissey, L. A.↗