Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Timescale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The Effect of Pressure on NO x Entitlement and Reaction Timescales in a Premixed Axial Jet-In-Crossflow

This paper investigates the pressure dependency of a lean premixed jet injected into a lean vitiated crossflow with an experimentally verified detailed chemistry computational fluid dynamics (CFD) model and 53 species considered. Experimental data were taken in an axially staged combustor with an optically accessible test section, allowing the use of particle image velocimetry (PIV) and CH* chemiluminescence techniques as well as point measurement of species concentration, temperature, and pressure. The experimental data cases at one, three, and five atmospheres were selected to describe the flame stabilization dependency on pressure and gain the required knowledge for an extrapolation to engine condition. Simulated exit nitrogen oxide levels were validated with experimental emission data, and a global emission trend for the NO reduction at elevated pressure and constant turbine inlet temperature level was defined. The nitrogen oxide benefit at elevated operating pressure was justified with the significantly smaller flame surface area: the analysis of the simulated spanwise and top-view profiles showed a relatively short receded core flame with nitrogen oxide production in the center at high pressure relative to a longer and larger shear layer flame at atmospheric condition that produced NO toward the inner and outer side of the flame. Furthermore, decomposition of the Damköhler number revealed the strong influence of the reaction timescales with higher reaction rates at elevated pressure, along with a moderate influence of the turbulent timescales, showing higher turbulence intensity in the lee-side recirculation zone at lower pressure.

03 NATURAL GAS↗
DOE OSTI2022

Dynamic wavelength control of laser pulse profiles at picosecond to nanosecond timescales

We report on a novel combined laser pulse shaping and dynamic wavelength encoding capability based on a simple architecture implementing direct space to time mapping. There are several potential applications that can be enabled by the ability to control the instantaneous intensity or wavelength of an optical waveform on a picosecond-to-nanosecond timescale. To our knowledge, no known methods can access this temporal regime with a practical architecture. Here, we demonstrate an extension of the Space–Time Induced Linearly Encoded Transcription for Temporal Optimization (STILETTO) technique that can generate optical waveforms with a programmable instantaneous wavelength vs. time. We experimentally demonstrate the technique by generating self-gated spectrograms and show that it can encode dynamic wavelength vs time profiles at timescales not achievable by any other known method.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Abbreviated Technical Report: Experimentally Interrogating Detonation Chemistry on Sub-Nanosecond to Nanosecond Timescales

Direct experimental measurement of chemical reactions during high explosive detonation remains challenging. Theory and modeling have long preceded experiment in the fundamental physical and chemical kinetic properties of detonation, and experimentation at the relevant timescales are needed to both validate models and provide fundamental understanding of detonation. In this LDRD-ER project, two approaches, x-ray diffraction and core-level x-ray Raman, were developed and used to further experimental capabilities to address this gap. We further developed dynamic x-ray diffraction to directly detect nanodiamond formation during detonation, providing experimental data towards resolving longstanding controversy in the scientific literature, and although the full kinetics have not yet been fully mapped, diamond diffraction appears on the same timescales as detonation soot formation. In the second research thrust, we have developed core-level x-ray Raman for use with high explosives. This technique provides information analogous to x-ray absorption spectroscopy and electron energy loss spectroscopy, but uses inelastic scattering of hard x-rays that can interrogate chemistry around light elements much deeper into the material. The low cross section and requisite high solid angle collection have hindered its use for ultra-fast spectroscopy. We developed and tested a high-q spectrometer which will substantially increase cross section and signal-to-noise, showing this method will also not dramatically alter, compared to x-ray absorption, the most discriminating spectral features of C, N, and O from various high explosives and expected detonation products. We have also used x-ray Raman combined with OCEAN electronic structure calculations to explore dynamic photodegradation mechanisms in PETN and CL-20 explosives. This provides a pathway towards implementing capability to dynamically explore chemistry at an x-ray free electron laser.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multi-Period Optimization of Multi-Timescale Energy Systems: Application to Solid-Oxide Electrolysis Cells

A presentation detailing the recent progress in the optimization of Solid-Oxide Cells under Chemical Degradation. The existing methods typically involve a quasi-steady state assumption to make this large-scale problem tractable. Here, we introduce an extension to this method that allows for adaptive coupling of degradation with the fast-timescale process based on a variety of error thresholds. This reduces the error accumulated during long-term optimization of the SOC under degradation and allows for decision making at multiple timescales. The results presented include long-term operating profiles of the SOC under degradation with both steady-state and fluctuating day to day operation.

Giridhar, Nishant↗
DOE OSTI2020

Lyapunov and Clearing Timescales in Planetary Chaotic Zones

Debris disks in planetary systems are known to possess gaps “opened” by planets in their close-to-coorbital neighborhoods; the gaps are free from low-mass material such as planetesimals. We consider the escape process of the initially zero-eccentric particles from the gap zone in a scenario consisting of two basic consequent stages: (1) the particle orbit's eccentricity is inflated, while its specific energy is relatively constant, and (2) the particle orbit's semimajor axis is inflated, while its specific angular momentum is relatively constant. During the first stage, the chaotic transport (diffusion) proceeds along the “staircase” of (p + 1):p (with integer p ≫ 1) overlapping particle–planet resonances, and during the second stage, it proceeds along the p:1 particle–planet resonance staircase. A specialized two-dimensional area-preserving map (a “tokamap” version) is derived to describe the first stage, while a multiharmonic Kepler map theory is used to describe the second stage. We derive the μ (mass parameter) scaling for the clearing timescale in the planetary chaotic zone. At small μ, it turns out to be inverse-quadratic in μ. The μ scaling for the Lyapunov timescale inside the gap is also derived. The derived scalings are in qualitative agreement with available numerical-experimental data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Multicolor Variability of Young Stars in the Lagoon Nebula: Driving Causes and Intrinsic Timescales

Space observatories have provided unprecedented depictions of the many variability behaviors typical of low-mass, young stars. However, those studies have so far largely omitted more massive objects (~2 M {sub ⊙} to 4–5 M {sub ⊙}) and were limited by the absence of simultaneous, multiwavelength information. We present a new study of young star variability in the ~1–2 Myr old, massive Lagoon Nebula region. Our sample encompasses 278 young, late B to K-type stars, monitored with Kepler/K2. Auxiliary u, g, r, i, Hα time-series photometry, simultaneous with K2, was acquired at the Paranal Observatory. We employed this comprehensive data set and archival infrared photometry to determine individual stellar parameters, assess the presence of circumstellar disks, and tie the variability behaviors to inner disk dynamics. We found significant mass-dependent trends in variability properties, with B/A stars displaying substantially reduced levels of variability compared to G/K stars for any light-curve morphology. These properties suggest different magnetic field structures at the surface of early-type and later-type stars. We also detected a dearth of some disk-driven variability behaviors, particularly dippers, among stars earlier than G. This indicates that their higher surface temperatures and more chaotic magnetic fields prevent the formation and survival of inner disk dust structures corotating with the star. Finally, we examined the characteristic variability timescales within each light curve and determined that the day-to-week timescales are predominant over the K2 time series. These reflect distinct processes and locations in the inner disk environment, from intense accretion triggered by instabilities in the innermost disk regions to variable accretion efficiency in the outer magnetosphere.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

The Variability of the Black Hole Image in M87 at the Dynamical Timescale

The black hole images obtained with the Event Horizon Telescope (EHT) are expected to be variable at the dynamical timescale near their horizons. For the black hole at the center of the M87 galaxy, this timescale (5–61 days) is comparable to the 6 day extent of the 2017 EHT observations. Closure phases along baseline triangles are robust interferometric observables that are sensitive to the expected structural changes of the images but are free of station-based atmospheric and instrumental errors. We explored the day-to-day variability in closure-phase measurements on all six linearly independent nontrivial baseline triangles that can be formed from the 2017 observations. We showed that three triangles exhibit very low day-to-day variability, with a dispersion of ∼3°–5°. The only triangles that exhibit substantially higher variability (∼90°–180°) are the ones with baselines that cross the visibility amplitude minima on the u–v plane, as expected from theoretical modeling. We used two sets of general relativistic magnetohydrodynamic simulations to explore the dependence of the predicted variability on various black hole and accretion-flow parameters. We found that changing the magnetic field configuration, electron temperature model, or black hole spin has a marginal effect on the model consistency with the observed level of variability. On the other hand, the most discriminating image characteristic of models is the fractional width of the bright ring of emission. Models that best reproduce the observed small level of variability are characterized by thin ring-like images with structures dominated by gravitational lensing effects and thus least affected by turbulence in the accreting plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Ab-initio General-relativistic Neutrino-radiation Hydrodynamics Simulations of Long-lived Neutron Star Merger Remnants to Neutrino Cooling Timescales

Abstract We perform the first 3D ab-initio general-relativistic neutrino-radiation hydrodynamics of a long-lived neutron star merger remnant spanning a fraction of its cooling timescale. We find that neutrino cooling becomes the dominant energy loss mechanism after the gravitational-wave dominated phase (∼20 ms postmerger). Electron flavor antineutrino luminosity dominates over electron flavor neutrino luminosity at early times, resulting in a secular increase of the electron fraction in the outer layers of the remnant. However, the two luminosities become comparable ∼20–40 ms postmerger. A dense gas of electron antineutrinos is formed in the outer core of the remnant at densities ∼10 14.5 g cm −3 , corresponding to temperature hot spots. The neutrinos account for ∼10% of the lepton number in this region. Despite the negative radial temperature gradient, the radial entropy gradient remains positive, and the remnant is stably stratified according to the Ledoux criterion for convection. A massive accretion disk is formed from the material squeezed out of the collisional interface between the stars. The disk carries a large fraction of the angular momentum of the system, allowing the remnant massive neutron star to settle to a quasi-steady equilibrium within the region of possible, stable, rigidly rotating configurations. The remnant is differentially rotating, but it is stable against the magnetorotational instability. Other MHD mechanisms operating on longer timescales are likely responsible for the removal of the differential rotation. Our results indicate the remnant massive neutron star is thus qualitatively different from a protoneutron stars formed in core-collapse supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Assessment of WRF (v 4.2.1) dynamically downscaled precipitation on subdaily and daily timescales over CONUS

Abstract. This study analyzes the quality of simulated historical precipitation across the contiguous United States (CONUS) in a 12 km Weather Research and Forecasting model version 4.2.1 (WRF v 4.2.1)-based dynamical downscaling of the fifth-generation ECMWF atmospheric reanalysis (ERA5). This work addresses the following questions. First, how well are the 3 and 24 h precipitation characteristics (diurnal and annual cycles, precipitation frequency, annual and seasonal mean and maximum precipitation, and distribution of seasonal maximum precipitation) represented in the downscaled simulation, compared to ERA5? And second, how does the performance of the simulated WRF precipitation vary across seasons, regions, and timescales? Performance is measured against the National Centers for Environmental Prediction/Environmental Modeling Center (NCEP/EMC) 4 km Stage IV and Oregon State University Parameter-Elevation Regressions on Independent Slopes Model (PRISM) data on 3 and 24 h timescales, respectively. Our analysis suggests that the 12 km WRF exhibits biases typically found in other WRF simulations, including those at convection-permitting scales. In particular, WRF simulates both the timing and magnitude of the summer diurnal precipitation peak as well as ERA5 over most of the CONUS, except for a delayed diurnal peak over the Great Plains. As compared to ERA5, both the month and the magnitude of the precipitation peak annual cycle are remarkably improved in the downscaled WRF simulation. WRF slightly overestimates 3 and 24 h precipitation maximum over the CONUS, in contrast to ERA5, which generally underestimates these quantities mainly over the eastern half of the CONUS. Notably, WRF better captures the probability density distribution (PDF) of 3 and 24 h annual and seasonal maximum precipitation. WRF exhibits seasonally dependent precipitation biases across the CONUS, while ERA5's biases are relatively consistent year round over most of the CONUS. These results suggest that dynamical downscaling to a higher resolution improves upon some precipitation metrics but is susceptible to common regional climate model biases. Consequently, if used as input data for domain-specific models, we suggest moderate bias correction be applied to the dynamically downscaled product.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Gamma-ray burster recurrence timescales

Three optical transients have been found which are associated with gamma-ray bursters (GRBs). The deduced recurrence timescale for these optical transients (tau sub opt) will depend on the minimum brightness for which a flash would be detected. A detailed analysis using all available data of tau sub opt as a function of E(gamma)/E(opt) is given. For flashes similar to those found in the Harvard archives, the best estimate of tau sub opt is 0.74 years, with a 99% confidence interval from 0.23 years to 4.7 years. It is currently unclear whether the optical transients from GRBs also give rise to gamma-ray events. One way to test this association is to measure the recurrence timescale of gamma-ray events tau sub gamma. A total of 210 gamma-ray error boxes were examined and it was found that the number of observed overlaps is not significantly different from the number expected from chance coincidence. This observation can be used to place limits on tau sub gamma for an assumed luminosity function. It was found that tau sub gamma is approx. 10 yr if bursts are monoenergetic. However, if GRBs have a power law luminosity function with a wide dynamic range, then the limit is tau sub gamma 0.5 yr. Hence, the gamma-ray data do not require tau sub gamma and tau sub opt to be different.

Schaefer, B. E.↗
NASA NTRS1987

Timescales for planetary accretion and the structure of the protoplanetary disk

Models of planetary accretion which assume the mass of condensable matter in the protoplanetary disk was equal to that present in the planets today predict accretion timescales for the outer planets approximately or less than 10 to the 8th years. Such timescales are inconsistent with observations of star forming regions, which suggest that most of the gas in disks around one solar mass is removed in a few x 10 to the 6th years. A unified scenario was outlined for solar system formation consistent with astrophysical constraints. Jupiter's core could have grown by runaway accretion of planetesimals to a mass sufficient to initiate rapid accretion of gas in times of order of 500,000 to 5,000,000 years, provided the surface density of solids in its accretion zone was at least 5 to 10 times greater than that required by minimum mass models of the protoplanetary disk. The inner planets and the asteroids can be accounted for in this picture if the surface density of the solar nebula was relatively uniform out to Jupiter's orbit. The formation of such a protoplanetary disk requires significant transport of mass and angular momentum, and is consistent with viscous accretion disk models of the solar nebula.

Lissauer, Jack J.↗
NASA NTRS1990

Global Models of Intermediate Timescale Variability on the Sun

In recent years a number of advances in both observation and theory have increased our understanding of the solar interior and how to model it. For climate studies, the timescale of interest for changes in the Sun ranges from decades to centuries. Some of the theoretical advances that will contribute to the building of global models of the Sun's variability on intermediate timescales are described. The current constraints on the important components are discussed. Finally a short discussion presenting some implications for input to climate modeling is presented.

Fox, Peter A.↗
NASA NTRS1992

Wind transport near the poles of Mars: Timescales of changes in deposition and erosion

Movement of sediment into and out of polar deposits is closely linked to the polar volatile budget and to changes in wind systems over the course of astronomically induced climate cycles. The present observations of the morphology of polar layered deposits, mantling sediments, dune fields, and variable surface features are the basis of inferences on the efficacy of polar sediment transport mechanisms. The time scales of formation of these features vary from days to perhaps 10(exp 6) yr, and latitudinal banding of dune fields near the poles may have been formed on timescales of 10(exp 7) yr. Orientations of intracrater dunes, dune crests, and wind streaks have been measured for latitudes -45 to -90 to compare features of likely different timescales of formation with models of wind flow from the south polar region. There is a complex variation with latitude of the indicated wind directions and of the efficacy of the resultant winds in orienting dune fields that suggests influence of frost cover on the ability of winds to move sediment in the spring and fall. Because of changes in the relative effectiveness of spring and fall winds expected with progression of the season of perihelion, the latitudinal variation in transport efficiency may mean that sediments at different latitudes dominantly respond to wind erosion and transport at different times during the perihelion cycle.

Thomas, Peter C.↗
NASA NTRS1995

Relativistic timescale analysis suggests lunar theory revision

The SI second of the atomic clock was calibrated to match the Ephemeris Time (ET) second in a mutual four year effort between the National Physical Laboratory (NPL) and the United States Naval Observatory (USNO). The ephemeris time is 'clocked' by observing the elapsed time it takes the Moon to cross two positions (usually occultation of stars relative to a position on Earth) and dividing that time span into the predicted seconds according to the lunar equations of motion. The last revision of the equations of motion was the Improved Lunar Ephemeris (ILE), which was based on E. W. Brown's lunar theory. Brown classically derived the lunar equations from a purely Newtonian gravity with no relativistic compensations. However, ET is very theory dependent and is affected by relativity, which was not included in the ILE. To investigate the relativistic effects, a new, noninertial metric for a gravitated, translationally accelerated and rotating reference frame has three sets of contributions, namely (1) Earth's velocity, (2) the static solar gravity field and (3) the centripetal acceleration from Earth's orbit. This last term can be characterized as a pseudogravitational acceleration. This metric predicts a time dilation calculated to be -0.787481 seconds in one year. The effect of this dilation would make the ET timescale run slower than had been originally determined. Interestingly, this value is within 2 percent of the average leap second insertion rate, which is the result of the divergence between International Atomic Time (TAI) and Earth's rotational time called Universal Time (UT or UTI). Because the predictions themselves are significant, regardless of the comparison to TAI and UT, the authors will be rederiving the lunar ephemeris model in the manner of Brown with the relativistic time dilation effects from the new metric to determine a revised, relativistic ephemeris timescale that could be used to determine UT free of leap second adjustments.

Deines, Steven D.↗
NASA NTRS2011

Timescale Correlation between Marine Atmospheric Exposure and Accelerated Corrosion Testing

Evaluation of metal-based structures has long relied on atmospheric exposure test sites to determine corrosion resistance in marine environments. Traditional accelerated corrosion testing relies on mimicking the exposure conditions, often incorporating salt spray and ultraviolet (UV) radiation, and exposing the metal to continuous or cyclic conditions of the corrosive environment. Their success for correlation to atmospheric exposure is often a concern when determining the timescale to which the accelerated tests can be related. Accelerated laboratory testing, which often focuses on the electrochemical reactions that occur during corrosion conditions, has yet to be universally accepted as a useful tool in predicting the long term service life of a metal despite its ability to rapidly induce corrosion. Although visual and mass loss methods of evaluating corrosion are the standard and their use is imperative, a method that correlates timescales from atmospheric exposure to accelerated testing would be very valuable. This work uses surface chemistry to interpret the chemical changes occurring on low carbon steel during atmospheric and accelerated corrosion conditions with the objective of finding a correlation between its accelerated and long-term corrosion performance. The current results of correlating data from marine atmospheric exposure conditions at the Kennedy Space Center beachside corrosion test site, alternating seawater spray, and immersion in typical electrochemical laboratory conditions, will be presented. Key words: atmospheric exposure, accelerated corrosion testing, alternating seawater spray, marine, correlation, seawater, carbon steel, long-term corrosion performance prediction, X-ray photoelectron spectroscopy.

Montgomery, Eliza L.↗
NASA NTRS2017

Discovery of Short-Timescale Oscillations in the Transition Region by CLASP

High cadence spectroscopic observations by CLASP reveal that intensity fluctuations of blue and red peaks of the hydrogen Lyman-alpha line (121.57 nm) recurrently appear in the quiet Sun at short timescale. The intensity fluctuations of the blue and red peaks are opposite in phase to each other: the blue peak is enhanced during the decease of the red peak, and vice versa. Similar intensity fluctuations also can be seen in Mg II h & k profiles observed with IRIS. It is suggested that the short-timescale oscillatory or torsional phenomena take place in the transition region or the upper chromosphere.

CLASP↗
NASA NTRS2018

Formation Timescales of Amosphous Rims on Lunar Grains Derived from ARTEMIS Observations

The weathering of airless bodies exposed to space is a fundamental process in the formation and evolution of planetary surfaces. At the Moon, space weathering induces a variety of physical, chemical, and optical changes including the formation of nanometer-sized amorphous rims on individual lunar grains. These rims are formed by vapor redeposition from micrometeoroid impacts and ion irradiation-induced amorphization of the crystalline matrix. For ion irradiation-induced rims, however, laboratory experiments of the depth and formation timescales of these rims stand in stark disagreement with observations of lunar soil grains. We use observations by the Acceleration, Reconnection, Turbulence, and Electrodynamics of the Moon's Interaction with the Sun (ARTEMIS) spacecraft in orbit around the Moon to compute the mean ion flux to the lunar surface between 10 eV and 5 MeV and convolve this flux with ion irradiation-induced vacancy production rates as a function of depth calculated using the Stopping Range of Ions in Matter model. By combining these results with laboratory measurements of the critical fluence for charged-particle amorphization in olivine, we can predict the formation timescale of amorphous rims as a function of depth in olivinic grains. This analysis resolves two outstanding issues: (1) the provenance of >100 nm amorphous rims on lunar grains and (2) the nature of the depth-age relationship for amorphous rims on lunar grains.

Amorphous Rims↗
NASA NTRSDate not supplied

SURFACE EXOSURE TIMESCALES OF APOLLO CORE SAMPLE 73002 SPACE WEATHERED GRAINS

Introduction: Space weathering causes the surface regolith on airless bodies like the Moon to be morphologically, microstructurally, and chemically altered due to micrometeoroid bombardment and solar wind irradiation[1]. These processes produce a multitude of microstructural and chemical changes in individual soil grains that accumulate as grains are exposed on the surface over time. One microstructural feature produced by exposure to the solar wind is the development of ion-damaged rims on regolith grains via H+ and He+ ion irradiation. Also present are solar energetic particle (SEP) tracks, which are nanoscale lineations of ionization damage within grain interiors formed by high energy solar flare ions(primarily Fe group nuclei) which penetrate millimeters below the surface [2]. Recent work has confirmed that the thickness of solar wind-damaged amorphous rims on anorthite grains, nanocrystalline rims on olivine grains, and their respective SEP track densities are correlated with their surface exposure ages [3].Core sample 73002, recently released under the Apollo Next Generation Sample Analysis (ANGSA) Program, has provided an opportunity to study material collected from the light mantle formation during Apollo 17. The light mantle is thought to have been deposited via a landslide originating from the neighboring South Massif [4]. Spectral profiles and ferromagnetic resonance measurements of bulk soils sampled at cm-intervals from 73002 indicate the existence of mature regolith extending ~8 cm below the surface, suggesting the presence of an in-situ reworking zone in the core[5,6].Here we present the distribution of SEP track densities, solar wind damaged rim widths, and the corresponding surface exposure ages of grains residing in the proposed in-situ reworking zone of core 73002. Methods: Bulk samples of regolith from the first eight intervals and every following fourth interval down the core (dissection Pass 2) were delivered to Purdue University as <45 μm size fractions. The first eight0.5 cm intervals, representing the top 4cmof regolith, were individually dry sieved to a<20 μm size fraction, and grains were prepared by ultramicrotomy for analysis in the scanning transmission electron microscope (STEM). Bright field (BF) and dark field (DF) STEM images of solar flare tracks and solar wind damaged rims were acquired on a JEOL 2500SE TEM, equipped with a 60 mm2ultra-thin window silicon drift energy dispersive X-ray (EDX) spectrometer at NASA John-son Space Center. Grain compositions were determined by EDX compositional spectrum imaging. SEP track densities and amorphous rim thicknesses were measured on BF and DF images. Results: The fraction of grains with discernable space weathering features decreased with depth, with 100% in the first interval exhibiting space weathering features as opposed to ~60% in Interval 8.BF and DF STEM images show splash-melt and vapor deposited rims on outermost grain margins with embedded Fe-bearing nanoparticles ranging in size up to ~10 nm in diameter. Images also show solar-wind damaged rims below the vapor deposits, and SEP tracks present in grain interiors. The rim thicknesses and SEP track densities were determined using the methods of [3] for 54grains spanning the top 4 cm. ~80% of the grains analyzed were anorthite and ~20% were olivine. The track production rate from[3] was used to estimate the surface exposure times of the grains in this study. The majority of exposure times are in the 1 -5 MY range for all intervals. The lowest value was 3.8x 10¬5years in Interval 8and the highest value was1.1x 107years in Interval 6. Grains with the highest solar wind damage rim thicknesses and SEP track densities are found in Interval 6.The highest rim thickness and track density observed for anorthiteis126.5 nm and4.7 x 1011tracks/cm2, while for olivine they are 98.6 nm and 1.83 x 1011tracks/cm2, respectively. Discussion: Intervals from the top 4 cm of 73002 show similar SEP track density and solar wind damaged rim thickness distributions. Spectral and ferromagnetic resonance measurements of 73002 indicate an in-situ reworking zone up to~8 cm below the surface[5,6].The depth analyzed in this work is within the core’s uppermost in-situ reworking zone and may serve as an explanation to the homogenous distribution of exposure ages. The decreasing abundance of space weathered features with depth is consistent with regolith mixing models showing an exponential decay in regolith maturity with depth over time[7].A maximum surface exposure age determined via SEP track density is approximately 10million years. This timescale is consistent with the lower estimate of surface exposure ages of the light mantle determined in previous studies, which can range from 10s to over 100 Ma [4].It also falls within the core regolith reworking development timescale of ~17 Ma [5,6]. Additional analysis will be performed for a further seven intervals in 73002.

J A McFadden↗