Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tearing instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Three-dimensional spontaneous magnetic reconnection

Magnetic reconnection is best known from observations of the Sun where it causes solar flares. Observations estimate the reconnection rate as a small, but non-negligible fraction of the Alfvén speed, so-called fast reconnection. Until recently, the prevailing pictures of reconnection were either of resistivity or plasma microscopic effects, which was contradictory to the observed rates. Alternative pictures were either of reconnection due to the stochasticity of magnetic field lines in turbulence or the tearing instability of the thin current sheet. In this paper we simulate long-term three-dimensional nonlinear evolution of a thin, planar current sheet subject to a fast oblique tearing instability using direct numerical simulations of resistive-viscous magnetohydrodynamics. The late-time evolution resembles generic turbulence with a −5/3 power spectrum and scale-dependent anisotropy, so we conclude that the tearing-driven reconnection becomes turbulent reconnection. The turbulence is local in scale, so microscopic diffusivity should not affect large-scale quantities. This is confirmed by convergence of the reconnection rate toward ∼0.015v{sub A} with increasing Lundquist number. In this spontaneous reconnection, with mean field and without driving, the dissipation rate per unit area also converges to ∼0.006ρv{sub A}{sup 3}, and the dimensionless constants 0.015 and 0.006 are governed only by self-driven nonlinear dynamics of the sheared magnetic field. Remarkably, this also means that a thin current sheet has a universal fluid resistance depending only on its length to width ratio and to v{sub A}/c.

79 ASTRONOMY AND ASTROPHYSICS↗

Nonlinear evolution of resistive tearing mode instability with shear flow and viscosity

The effect of shear flow on the nonlinear evolution of the tearing mode is investigated via numerical solutions of the resistive MHD equations in slab geometry, using a finite-difference alternative-direction implicit method. It was found that, when the shear flow is small (V less than 0.3), the tearing mode saturates within one resistive time, whereas for larger flows the nonlinear saturation develops on longer time scales. The magnetic energy release decreases and the saturation time increases with increasing values of V for both small and large resistivity. Shear flow was found to decrease the saturated magnetic island width and to generate currents far from the tearing layer. Results suggest that equilibrium shear flow may improve the confinement of tokamak plasma.

Ofman, L.↗

Fast Dissipation of Colliding Alfvén Waves in a Magnetically Dominated Plasma

Magnetic energy around compact objects often dominates over plasma rest mass, and its dissipation can power the object's luminosity. We describe a dissipation mechanism that works faster than magnetic reconnection. The mechanism involves two strong Alfvén waves with anti-aligned magnetic fields B 1 and B 2 that propagate in opposite directions along the background magnetic field B 0 and collide. The collision forms a thin current sheet perpendicular to B 0 , which absorbs the incoming waves. The current sheet is sustained by an electric field E breaking the magnetohydrodynamic condition E < B and accelerating particles to high energies. We demonstrate this mechanism with kinetic plasma simulations using a simple setup of two symmetric plane waves with amplitude A = B 1 / B 0 = B 2 /B 0 propagating in a uniform B 0 . The mechanism is activated when A > 1/2. It dissipates a large fraction of the wave energy, † = (2A - 1)/A 2 , reaching 100% when A = 1. The plane geometry allows one to see the dissipation process in a one-dimensional simulation. We also perform two-dimensional simulations, enabling spontaneous breaking of the plane symmetry by the tearing instability of the current sheet. At moderate A of main interest, the tearing instability is suppressed. Dissipation transitions to normal, slower, magnetic reconnection at A $\gg$ 1. The fast dissipation described in this paper may occur in various objects with perturbed magnetic fields, including magnetars, jets from accreting black holes, and pulsar wind nebulae.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTIPLE CURRENT SHEET SYSTEMS IN THE OUTER HELIOSPHERE: ENERGY RELEASE AND TURBULENCE

In the outer heliosphere, beyond the solar wind termination shock, it is expected that the warped heliospheric current sheet forms a region of closely packed, multiple, thin current sheets. Such a system may be subject to the ion-kinetic tearing instability, and hence may generate magnetic islands and hot populations of ions associated with magnetic reconnection. Reconnection processes in this environment have important implications for local particle transport, and for particle acceleration at reconnection sites and in turbulence. We study this complex environment by means of three-dimensional hybrid simulations over long timescales, in order to capture the evolution from linear growth of the tearing instability to a fully developed turbulent state at late times. The final state develops from the highly ordered initial state via both forward and inverse cascades. Component and spectral anisotropy in the magnetic fluctuations is present when a guide field is included. The inclusion of a population of newborn interstellar pickup protons does not strongly affect these results. Finally, we conclude that reconnection between multiple current sheets can act as an important source of turbulence in the outer heliosphere, with implications for energetic particle acceleration and propagation.

79 ASTRONOMY AND ASTROPHYSICS↗

Resistive magnetohydrodynamics simulations of the ideal tearing mode

We study the linear and nonlinear evolution of the tearing instability on thin current sheets by means of two-dimensional numerical simulations, within the framework of compressible, resistive MHD. In particular we analyze the behavior of current sheets whose inverse aspect ratio scales with the Lundquist number S as S{sup −1/3}. This scaling has been recently recognized to yield the threshold separating fast, ideal reconnection, with an evolution and growth that are independent of S provided this is high enough, as it should be natural having the ideal case as a limit for S→∞. Our simulations confirm that the tearing instability growth rate can be as fast as γ≈0.6 τ{sub A}{sup −1}, where τ{sub A} is the ideal Alfvénic time set by the macroscopic scales, for our least diffusive case with S=10{sup 7}. The expected instability dispersion relation and eigenmodes are also retrieved in the linear regime, for the values of S explored here. Moreover, in the nonlinear stage of the simulations we observe secondary events obeying the same critical scaling with S, here calculated on the local, much smaller lengths, leading to increasingly faster reconnection. These findings strongly support the idea that in a fully dynamic regime, as soon as current sheets develop, thin, and reach this critical threshold in their aspect ratio, the tearing mode is able to trigger plasmoid formation and reconnection on the local (ideal) Alfvénic timescales, as required to explain the explosive flaring activity often observed in solar and astrophysical plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of MHD stability and active mode control on KSTAR for high confinement, disruption-free plasma

Long-pulse plasma operation at high normalized beta, $β_N$, above the $\textit{n}$= 1 ideal MHD no-wall stability limit in KSTAR is presently limited by tearing instabilities rather than resistive wall modes. H-mode plasma operation during the recent KSTAR device campaign produced discharges having strong $\textit{m/n}$= 2/1 tearing instabilities at $β_N$ lower than the ideal MHD no-wall beta limit. The unstable tearing mode consequently reduced plasma confinement and toroidal plasma rotation significantly. We report the experiment confirmed that an extended duration of electron cyclotron heating (ECH) at the initial phase of the discharge plays a critical role in mode destabilization. To study destabilizing mechanisms that affect the mode growth, the stability of the observed tearing modes from plasmas with significantly different $β_N$ is computed by using the resistive DCON code and the M3D-C 1 code. Equilibrium reconstructions that include constraints from internal profile diagnostics, and computed fast particle pressure are used as input for reliable computation of stability. The classical tearing stability index, Δ', from resistive DCON is computed to be unstable when the island is fully saturated with large amplitude, while the unstable mode is not computed by M3D-C 1 . The modified Rutherford equation (MRE) describing the evolution of the island width has been constructed for KSTAR plasmas by using plasma parameters computed by the TRANSP code. The MRE model estimates a saturated island width corresponding to ~10% of the plasma minor radius for equilibrium at high $β_N$ 3 having a stable Δ' from the resistive DCON. In preparation for long-pulse plasma operation at higher beta utilizing increased plasma heating power, a resistive wall mode (RWM) active feedback control algorithm has been completed and enabled on KSTAR. To accurately determine the $\textit{n}$= 1component produced by RWMs, an algorithm has been developed that includes magnetic sensor compensation of the prompt applied field and the field from the induced current on the passive conductors. Use of multiple toroidal sensor arrays is enabled by modifying the sensor toroidal angles assumed in mode decomposition to include the effect of varied mode helicities in the outboard region where the mode measurement is made. This analysis on stability, transport, and control provides the required foundation for disruption prediction and avoidance research on KSTAR.

resistive wall mode (RWM)↗

Multi-scale structures of turbulent magnetic reconnection

We have analyzed data from a series of 3D fully kinetic simulations of turbulent magnetic reconnection with a guide field. A new concept of the guide filed reconnection process has recently been proposed, in which the secondary tearing instability and the resulting formation of oblique, small scale flux ropes largely disturb the structure of the primary reconnection layer and lead to 3D turbulent features [W. Daughton et al., Nat. Phys. 7, 539 (2011)]. In this paper, we further investigate the multi-scale physics in this turbulent, guide field reconnection process by introducing a wave number band-pass filter (k-BPF) technique in which modes for the small scale (less than ion scale) fluctuations and the background large scale (more than ion scale) variations are separately reconstructed from the wave number domain to the spatial domain in the inverse Fourier transform process. Combining with the Fourier based analyses in the wave number domain, we successfully identify spatial and temporal development of the multi-scale structures in the turbulent reconnection process. When considering a strong guide field, the small scale tearing mode and the resulting flux ropes develop over a specific range of oblique angles mainly along the edge of the primary ion scale flux ropes and reconnection separatrix. The rapid merging of these small scale modes leads to a smooth energy spectrum connecting ion and electron scales. When the guide field is sufficiently weak, the background current sheet is strongly kinked and oblique angles for the small scale modes are widely scattered at the kinked regions. Similar approaches handling both the wave number and spatial domains will be applicable to the data from multipoint, high-resolution spacecraft observations such as the NASA magnetospheric multiscale (MMS) mission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear growth rates of resistive tearing modes with sub-Alfvénic streaming flow

The tearing instability with sub-Alfvénic streaming flow along the external magnetic field is investigated using resistive MHD simulation. It is found that the growth rate of the tearing mode instability is larger than that without the streaming flow. With the streaming flow, there exist two Alfvén resonance layers near the central current sheet. The larger perturbation of the magnetic field in two closer Alfvén resonance layers could lead to formation of the observed cone structure and can largely enhance the development of the tearing mode for a narrower streaming flow. For a broader streaming flow, a larger separation of Alfvén resonance layers reduces the magnetic reconnection. The linear growth rate decreases with increase of the streaming flow thickness. The growth rate of the tearing instability also depends on the plasma beta (β). When the streaming flow is embedded in the current sheet, the growth rate increases with β if β < β{sub s}, but decreases if β > β{sub s}. The existence of the specific value β{sub s} can be attributed to competition between the suppressing effect of β and the enhancing effect of the streaming flow on the magnetic reconnection. The critical value β{sub s} increases with increase of the streaming flow strength.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamic Turbulence Mediated by Reconnection

Magnetic field fluctuations in magnetohydrodynamic turbulence can be viewed as current sheets that are progressively more anisotropic at smaller scales. As suggested by Loureiro and Boldyrev and Mallet et al., below a certain critical thickness, λ{sub c}, such current sheets become tearing-unstable. We propose that the tearing instability changes the effective alignment of the magnetic field lines in such a way as to balance the eddy turnover rate at all scales smaller than λ{sub c}. As a result, turbulent fluctuations become progressively less anisotropic at smaller scales, with the alignment angle increasing as θ∼(λ/λ{sub ∗}){sup −4/5+β}, where λ{sub ∗}∼L{sub 0}S{sub 0}{sup −3/4} is the resistive dissipation scale. Here L {sub 0} is the outer scale of the turbulence, S {sub 0} is the corresponding Lundquist number, and 0⩽β<4/5 is a parameter. The resulting Fourier energy spectrum is E(k{sub ⊥})∝k{sub ⊥}{sup −11/5+2β/3}, where k{sub ⊥} is the wavenumber normal to the local mean magnetic field, and the critical scale is λ{sub c}∼S{sub L}{sup −(4−5β)/(7−20β/3)}. The simplest model corresponds to β = 0, in which case the predicted scaling formally agrees with one of the solutions obtained in Mallet et al. from a discrete hierarchical model of abruptly collapsing current sheets, an approach different from and complementary to ours. We also show that the reconnection-mediated interval is non-universal with respect to the dissipation mechanism. Hyper-resistivity of the form η-tilde k{sup 2+2s} leads (in the simplest case of β = 0) to the different transition scale λ{sub c}∼L{sub 0} S-tilde {sub 0}{sup −4/(7+9s)} and the energy spectrum E(k{sub ⊥})∝k{sub ⊥}{sup −(11+9s)/(5+3s)}, where S-tilde {sub 0} is the corresponding hyper-resistive Lundquist number.

79 ASTRONOMY AND ASTROPHYSICS↗

Collisionless reconnection in two-dimensional magnetotail equilibria

A two-dimensional particle simulation model based on the Darwin approximation to Maxwell's equations for studying collisionless reconnection in the magnetotail has been developed. Simulations of the pure ion tearing mode in a thin current sheet with normal B(z) field component demonstrate that in this limit this mode grows more slowly than expected based on previous analytic estimates. The saturation level of the tearing instability greatly surpasses estimates based on a simple trapping argument. The effect of the normal field component on the evolution of the tearing instability is considered. It is found that a normal field of even a few percent on axis strongly inhibits the growth of the instability.

Pritchett, P. L.↗

Magnetotail instability

The stability of the geomagnetic tail is investigated on the basis of three dimensional resistive magnetohydrodynamic simulations, using different dynamic constraints and different initial equilibria. Different forms of the energy equation for isotropic pressure are found to have no significant effect on the dynamic growth of a resistive tearing instability, which is responsible for near Earth reconnection, plasmoid formation and ejection, and the generation of fast plasma flows. The constraints of a modified double adiabatic approach, however, can quench the tearing instability through the development of large, mirror type, anisotropies in the boundary regions of the plasma sheet, unless isotropization occurs on fast, nearly Alfvenic, time scales. The presence of a net cross tail magnetic field component B(sub yN) can reduce the growth of the instability without complete stabilization. An increase of B(sub z) from midnight toward the tail flanks, however, by more than a factor of about 3, apparently completely stabilizes the tearing mode. Stabilization and destabilization thus may depend on properties and constraints (and their release) in regions other than the neutral sheet where reconnection is initiated.

Birn, Joachim↗

Onset of fast “ideal” tearing in thin current sheets: Dependence on the equilibrium current profile

In this paper, we study the scaling relations for the triggering of the fast, or “ideal,” tearing instability starting from equilibrium configurations relevant to astrophysical as well as laboratory plasmas that differ from the simple Harris current sheet configuration. We present the linear tearing instability analysis for equilibrium magnetic fields which (a) go to zero at the boundary of the domain and (b) contain a double current sheet system (the latter previously studied as a Cartesian proxy for the m = 1 kink mode in cylindrical plasmas). More generally, we discuss the critical aspect ratio scalings at which the growth rates become independent of the Lundquist number S, in terms of the dependence of the Δ′ parameter on the wavenumber k of unstable modes. The scaling Δ′(k) with k at small k is found to categorize different equilibria broadly: the critical aspect ratios may be even smaller than L/a ∼ Sα with α = 1/3 originally found for the Harris current sheet, but there exists a general lower bound α ≥ 1/4.

Pucci, F.↗

MHD modeling of magnetotail instability for anisotropic pressure

Results of three-dimensional MHD simulations of magnetotail dynamics with anisotropic pressure are presented. The pressure tensor is assumed to be gyrotropic, satisfying a modified double adiabatic approximation including Ohmic heating. It is found that these constraints tend to stabilize the tail with respect to the resistive tearing instability. Including an increasing level of additional isotropization results in a gradual transition to the fast instability found in an isotropic model, which is discussed for comparison. Possible isotropization mechanisms yielding magnetotail instability are discussed also. The stabilizing anisotropies are found primarily in the plasma sheet boundary region. This fact indicates a possibly important role of isotropization mechanisms operating in this region in destabilizing the magnetotail and initiating a tearing instability without the necessity of changes in fluctuation levels in the neutral sheet.

Hesse, Michael↗

Beta-dependent Properties of Solar Wind Current Sheets at 1 au

We utilize plasma turbulence in interplanetary coronal mass ejections as a natural laboratory to analyze more than 4600 current sheets observed over a broad range of electron and proton beta values, 10 −2 ≲ β e ≲ 10 and 10 −3 ≲ β p ≲ 10. The analysis shows that the shear angle Δθ and the thickness λ CS of the current sheets depend on both electron and proton beta. Specifically, the dependencies on electron beta are Δθ ≈ 12.6° $β^{0.41}_{e}$ and, λ CS /λ p ≈ 1.9 $β^{0.26}_{e}$ where λ p is the local proton inertial length. We argue that the beta dependence of the shear angle is an intrinsic feature of solar wind turbulence arising from the natural correlation between turbulence intensity and plasma beta. In contrast, the beta dependence of current sheet scales is likely a general characteristic of plasma turbulence. According to recent theory, current sheets formed in turbulence are disrupted by the electron tearing instability once their thickness is smaller than a critical scale. We demonstrate that normalizing the thickness of current sheets by this critical scale eliminates the dependence on beta across the entire range of plasma beta. This observation not only supports the theory suggesting that current sheets mediate the transition from the inertial to the kinetic cascade through the electron tearing instability, but also demonstrates the plausibility of similar processes in astrophysical plasma. The presented results also indicate that the theory may be applicable beyond its formal limits, m e /m i ≪ β ≪ 1.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaporation-driven instability of the precorneal tear film

Tear-film instability is widely believed to be a signature of eye health. When an interblink is prolonged, randomly distributed ruptures occur in the tear film. "Black spots" and/or "black streaks" appear in 15 to 40 s for normal individuals. For people who suffer from dry eye, tear-film breakup time (BUT) is typically less than a few seconds. To date, however, there is no satisfactory quantitative explanation for the origin of tear rupture. It was proposed recently that tear-film breakup is related to locally high evaporative thinning. A spatial variation in the thickness of the tear-film lipid layer (TFLL) may lead to locally elevated evaporation and subsequent tear-film breakup. We examine the local-evaporation-driven tear-film-rupture hypothesis in a one-dimensional (1-D) model for the evolution of a thin aqueous tear film overriding the cornea subject to locally elevated evaporation at its anterior surface and osmotic water influx at its posterior surface. Evaporation rate depends on mass transfer both through the coating lipid layer and through ambient air. We establish that evaporation-driven tear-film breakup can occur under normal conditions but only for higher aqueous evaporation rates. Predicted roles of environmental conditions, such as wind speed and relative humidity, on tear-film stability agree with clinical observations. More importantly, locally elevated evaporation leads to hyperosmolar spots in the tear film and, hence, vulnerability to epithelial irritation. In addition to evaporation rate, tear-film instability depends on the strength of healing flow from the neighboring region outside the breakup region, which is determined by the surface tension at the tear-film surface and by the repulsive thin-film disjoining pressure. This study provides a physically consistent and quantitative explanation for the formation of black streaks and spots in the human tear film during an interblink.

dry eye↗

Ion tearing in a magnetotail configuration with an embedded thin current sheet

The ion tearing instability is investigated in a magnetotail configuration that consists of a diffuse plasma sheet current and an embedded, thin current sheet with a strong current. For historical reasons, the thin embedded current sheet will be called a 'neutral sheet', even though the normal component of the magnetic field, Bn, is nonzero. In particular, we assume that the current within the thin current sheet is due to the acceleration of 'Speiserlike' ion trajectories by a cross-tail electric field Ey. It is found that the strong current within the neutral sheet is essentially unimportant to the growth rate of the tearing instability, and that the growth rate scales as (lambda(0)/Lz) squared, where Lz is the overall half thickness of the plasma sheet and lambda (0) is the ion inertial length. In the absence of the current outside the neutral sheet, current filamentation is stable.

Burkhart, G. R.↗

Impact of 3D Structure on Magnetic Reconnection

Results from 2.5D and 3D studies of the onset and development of the tearing instability are presented, using high fidelity resistive MHD simulations. A limited parameter study of the strength of the reconnecting field (or shear angle) was performed. An initially simple 1D equilibrium was used, consisting of a modified force-free current sheet, with periodic boundary conditions in all directions. In all cases, the linear and nonlinear evolution led to a primary current sheet between two large flux ropes. The global reconnection rate during this later stage was analyzed in all simulations. It was found that in 2.5D the primary current sheet fragmented owing to plasmoids, and as expected, the global reconnection rate, calculated using multiple methods, increases with the strength of the reconnecting field owing to a stronger Alfvén speed. In 3D, the presence of interacting oblique modes of the tearing instability complicates the simple 2.5D picture, entangling the magnetic field of the inflow and introducing a negative effect on the reconnection rate. The two competing effects of stronger Alfvén speed and entangling, which both increase with the strength of the reconnecting field, resulted in a decrease in the reconnection rate with increasing reconnecting field. For all simulations, the 3D rates were less than in 2.5D but suggest that as one goes to weak reconnecting field (or strong guide field) the system becomes more 2.5D-like and the 2.5D and 3D rates converge. These results have relevance to situations like nanoflare heating and flare current sheets in the corona.

Lars K S Daldorff↗