Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Te”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Structural heterogeneity in non-crystalline Te x Se1−x thin films

Rapid crystallization behavior of amorphous TexSe1−x thin films limits the use of these alloys as coatings and in optoelectronic devices. Understanding the short- and medium-range ordering of the amorphous structure and the fundamental physics governing the crystallization of the films is crucial. Although the lack of long range crystalline order restricts the characterization of the amorphous films, electron microscopy offers a way to extract information about the nanoscale ordering. In this paper, the local ordering of amorphous TexSe1−x thin films with x=0.22, 0.61, 0.70, 0.90, and 1 grown by thermal evaporation is investigated using radial distribution function (RDF) and fluctuation electron microscopy (FEM) analysis. RDF results show that the nearest-neighbor distances of selenium (Se) and tellurium (Te) in their crystalline structure are preserved, and their bond lengths increase with the addition of Te. Density functional theory (DFT) calculations predict structures with interatomic distances similar to those measured experimentally. Additionally, fluctuations in atomic coordination are analyzed. Medium range order (MRO) analysis obtained from FEM and DFT calculations suggests that there are at least two populations within the chain network structure, which are close to the Se–Se and Te–Te intrachain distances. For the binary alloy with x > 0.61, TexSe1−x, Te–Te like populations increase and Te fragments might form, suggesting that the glass forming ability decreases rapidly.

Sari, Bengisu (ORCID:0000000244217098)↗
DOE OSTI2020

Materials Data on Te(S2O7)2 by Materials Project

Te(S2O7)2 is gamma plutonium-like structured and crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of two Te(S2O7)2 clusters. In one of the Te(S2O7)2 clusters, Te4+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Te–O bond distances ranging from 1.99–2.13 Å. There are four inequivalent S6+ sites. In the first S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.61 Å. In the second S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.71 Å. In the third S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.69 Å. In the fourth S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.62 Å. There are fourteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the second O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the third O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the fourth O2- site, O2- is bonded in a bent 120 degrees geometry to one Te4+ and one S6+ atom. In the fifth O2- site, O2- is bonded in a bent 120 degrees geometry to two S6+ atoms. In the sixth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the seventh O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Te4+ and one S6+ atom. In the eighth O2- site, O2- is bonded in a 2-coordinate geometry to one Te4+ and one S6+ atom. In the ninth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the tenth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the eleventh O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the twelfth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one Te4+ and one S6+ atom. In the thirteenth O2- site, O2- is bonded in a bent 120 degrees geometry to two S6+ atoms. In the fourteenth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In one of the Te(S2O7)2 clusters, Te4+ is bonded in a 4-coordinate geometry to four O2- atoms. There are a spread of Te–O bond distances ranging from 2.00–2.11 Å. There are four inequivalent S6+ sites. In the first S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.61 Å. In the second S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.70 Å. In the third S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.70 Å. In the fourth S6+ site, S6+ is bonded to four O2- atoms to form corner-sharing SO4 tetrahedra. There are a spread of S–O bond distances ranging from 1.42–1.61 Å. There are fourteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 120 degrees geometry to one Te4+ and one S6+ atom. In the second O2- site, O2- is bonded in a bent 120 degrees geometry to two S6+ atoms. In the third O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the fourth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the fifth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the sixth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the seventh O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the eighth O2- site, O2- is bonded in a bent 120 degrees geometry to one Te4+ and one S6+ atom. In the ninth O2- site, O2- is bonded in a bent 120 degrees geometry to two S6+ atoms. In the tenth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the eleventh O2- site, O2- is bonded in a single-bond geometry to one S6+ atom. In the twelfth O2- site, O2- is bonded in a 2-coordinate geometry to one Te4+ and one S6+ atom. In the thirteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one Te4+ and one S6+ atom. In the fourteenth O2- site, O2- is bonded in a single-bond geometry to one S6+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Te by Materials Project

Te is alpha Selenium structured and crystallizes in the trigonal P3_121 space group. The structure is one-dimensional and consists of one Te ribbon oriented in the (0, 0, 1) direction. Te is bonded in a distorted water-like geometry to two equivalent Te atoms. Both Te–Te bond lengths are 2.89 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Te by Materials Project

Te is alpha Selenium structured and crystallizes in the trigonal P3_221 space group. The structure is one-dimensional and consists of one Te ribbon oriented in the (0, 0, 1) direction. Te is bonded in a distorted water-like geometry to two equivalent Te atoms. Both Te–Te bond lengths are 2.89 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Te by Materials Project

Te crystallizes in the orthorhombic Imma space group. The structure is two-dimensional and consists of two Te sheets oriented in the (0, 0, 1) direction. Te is bonded in a square co-planar geometry to four equivalent Te atoms. There are two shorter (2.99 Å) and two longer (3.01 Å) Te–Te bond lengths.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Te by Materials Project

Te is High Pressure (4-7GPa) Tellurium structured and crystallizes in the orthorhombic P2_12_12 space group. The structure is one-dimensional and consists of two Te ribbons oriented in the (1, 0, 0) direction. Te is bonded in a T-shaped geometry to three equivalent Te atoms. There are one shorter (2.81 Å) and two longer (3.11 Å) Te–Te bond lengths.

36 MATERIALS SCIENCE↗
NASA NTRS2021

Physics and Chemistry of Te and HgTe-based Ternary Melts

Historically, the theoretical treatment of the liquid phases has always been more difficult and complicated than that for solid and gas phases. A liquid has no lattice structure as crystalline solids and the atoms/molecules in the liquid can migrate through it relatively rapidly. On the other hand, it is also interacting with many other atoms/molecules so that the simplifications of the kinetic theory of gases cannot be employed. For more complicated liquids, such as the liquids of high ionicity and those containing hydrogen bonds and electric dipoles, the understanding is far from complete. At the same time, accurate information on the physics and chemistry of semiconductor melts is needed for the quantitative descriptions of the process of crystal growth from melt. The pre-crystallization phenomena in the liquid phase are critical because the properties of the grown crystals depend on the state and structure of the melt as well as the thermal history of the melt during solidification process. However, the data on the liquid phase, such as thermophysical properties of semiconductor melts are scarce, especially for the HgTe-based II-VI ternary compound semiconductors because of their high vapor pressure and extreme toxicity. Analysis of the thermophysical properties of the melt can provide information about structural transitions of the melt during the solidification process. From a broader point of view, the structure of liquids is much more complicated than the crystalline solids, especially the relaxation behavior through different thermal histories. The theory of hetero-phase fluctuations of liquids is applicable to any many-body systems including condensed-matter physics, field theory, physics of nuclear-matter, cosmology, biology and even sociology. This book summarizes the physics and chemistry from the experimental measurements and theoretical analyses of phase diagram, thermodynamic properties, density, thermal conductivity, viscosity, and electrical conductivity on the binary, pseudo-binary and ternary melts of the most advanced IR-detector material systems of HgCdTe and HgZnTe as well as the analyses of these results. The main objectives of this study are: (1) to provide the phase diagrams and thermodynamic properties of Hg-Cd-Te and Hg-Zn-Te systems through quantitatively fitting the experimental data by assuming an associated solution model for the liquid phase, (2) to experimentally measure the thermophysical properties of the Hg-Cd-Te and Hg-Zn-Te melts, including density, viscosity, electrical conductivity and thermal conductivity as functions of temperature and composition and (3) to enhance the fundamental knowledge of hetero-phase fluctuations and relaxation phenomena in the melts and extend our understanding of the solidification process in order to interpret the experimental results of crystal growth so as to improve the melt growth processes of the compound semiconductor. The physics and chemistry of Te and HgTe-based ternary melts were explored through the studies of the structural transformation during melting, the supercooling during solidification, the relaxation phenomena after rapid cooling of the melts and the metal-semiconductor transition in the melts through the analyses of electrical conductivity and Lorenz number. An in-depth study on the thermophysical properties and their time-dependent structural dynamic processes taking place in the vicinity of the solid-liquid phase transition of the narrow homogeneity range HgTe-based ternary semiconductors as well as the analysis of the homogenization process in the melt will also be presented.

Thermophysical properties↗
DOE OSTI2020

Evaporated Se x Te 1-x Thin Films with Tunable Bandgaps for Short-Wave Infrared Photodetectors

Semiconducting absorbers in high-performance short-wave infrared (SWIR) photodetectors and imaging sensor arrays are dominated by single-crystalline germanium and III-V semiconductors. However, these materials require complex growth and device fabrication procedures. In this work, thermally evaporated Se x Te 1- x alloy thin films with tunable bandgaps for the fabrication of high-performance SWIR photodetectors are reported. From absorption measurements, it is shown that the bandgaps of Se x Te 1- x films can be tuned continuously from 0.31 eV (Te) to 1.87 eV (Se). Owing to their tunable bandgaps, the peak responsivity position and photoresponse edge of Se x Te 1- x film-based photoconductors can be tuned in the SWIR regime. By using an optical cavity substrate consisting of Au/Al 2 O 3 to enhance its absorption near the bandgap edge, the Se 0.32 Te 0.68 film (an optical bandgap of ≈0.8 eV)-based photoconductor exhibits a cut-off wavelength at ≈1.7 μm and gives a responsivity of 1.5 AW -1 and implied detectivity of 6.5 × 10 10 cm Hz 1/2 W -1 at 1.55 μm at room temperature. Importantly, the nature of the thermal evaporation process enables the fabrication of Se 0.32 Te 0.68 -based 42 × 42 focal plane arrays with good pixel uniformity, demonstrating the potential of this unique material system used for infrared imaging sensor systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Investigation of Sub‐Bandgap Emission and Unexpected n‐Type Behavior in Undoped Polycrystalline CdSe x Te 1‐x

Abstract Se alloying has enabled significantly higher carrier lifetimes and photocurrents in CdTe solar cells, but these benefits can be highly dependent on CdSe x Te 1‐x processing. This work evaluates the optoelectronic, chemical, and electronic properties of thick (3 µm) undoped CdSe x Te 1‐x of uniform composition and varied processing conditions (CdSe x Te 1‐x evaporation rate, CdCl 2 anneal, Se content) chosen to reflect various standard device processing conditions. Sub‐bandgap defect emission is observed, which increased as Se content increased and with “GrV‐optimized CdCl 2 ” (i.e., CdCl 2 anneal conditions used for group‐V‐doped devices). Low carrier lifetime is found for GrV‐optimized CdCl 2 , slow CdSe x Te 1‐x deposition, and low‐Se films. Interestingly, all films (including CdTe control) exhibited n‐type behavior, where electron density increased with Se up to an estimated ≈10 17 cm −3 . This behavior appears to originate during the CdCl 2 anneal, possibly from Se diffusion leading to anion vacancy (e.g., V Se , V Te ) and Cl Te generation.

14 SOLAR ENERGY↗
DOE OSTI2022

Codesigning Alloy Compositions of CdSe y Te 1− y Absorbers and Mg x Zn 1− x O Contacts to Increase Solar Cell Efficiency

Thin‐film solar cells such as CdTe are a major commercial photovoltaic technology, with more than 25 GW installed worldwide and levelized costs of electricity competitive with fossil fuels. Further progress may result from integrating CdSe y Te 1− y absorbers with Mg x Zn 1− x O contacts, but the device efficiency is difficult to maximize due to coupled dependence on chemical composition of both alloys. Herein, a high‐throughput approach is demonstrated to codesign chemical compositions in alloyed Mg x Zn 1− x O/CdSe y Te 1− y thin‐film solar cells, using combinatorial libraries of PV devices with orthogonal composition gradients in CdSe y Te 1− y absorbers and Mg x Zn 1− x O contacts. It is found that the solar cell performance is a strong and coupled function of both elemental compositions, with efficiency up to 17.7% ( V OC = 836 mV, fill factor = 69%, J SC = 30.6 mA cm −2 ) at atomic compositions of Mg/(Mg + Zn) ≈18% and average Se/(Se + Te) ≈4%. These performance trends among >100 devices are explained by >100 ns lifetime of photoexcited charge carriers at the Mg x Zn 1− x O/CdSe y Te 1− y interface where strong Se accumulation is also observed. This study reports the optimal compositions of the commercially relevant Mg x Zn 1− x O/CdSe y Te 1− y solar cells and demonstrates a general approach to codesigning performance of alloyed thin‐film solar cells and other optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2024

Thermally induced structural evolution and nanoscale interfacial dynamics in Bi-Sb-Te layered nanostructures

Layered chalcogenides, including Bi-Sb-Te ternary alloys and heterostructures, are renowned as thermoelectric and topological insulators and have recently been highlighted as plasmonic building blocks beyond noble metals. Here, we conduct joint in situ transmission electron microscopy and density functional theory calculations to investigate the temperature-dependent nanoscale dynamics and interfacial properties, identifying the role of native defects and edge configurations in the anisotropic sublimation of Bi 2 Te 3 -Sb 2 Te 3 heterostructures and Sb 2-x Bi x Te 3 alloys. We report structural dynamics, including edge evolution, layer-by-layer sublimation, and the formation and coalescence of thermally induced polygonal nanopores. These nanopores are initiated by preferential dissociation of tellurium, reducing thermal stability in heterostructures. Triangular and quasi-hexagonal configurations dominate nanopore structures in heterostructures. Our calculations reveal antisite defects (Te Sb and Te Bi ) as key players in defect-assisted sublimation. These findings enhance our understanding of nanoscale dynamics and assist in designing tunable low-dimensional chalcogenides.

Bi2Te3-Sb2Te3 heterostructure↗
DOE OSTI2025

A first principles study on the adsorbate-adsorbate interactions on the CdTe(111) surface with Cd, Te, Zn, and Se adatoms

The study of adsorbate-adsorbate interactions is essential to understanding early crystal growth dynamics. Here, we employ planewave density functional theory to study the binary adatom pair interactions between Cd-Cd, Te-Te, Zn-Zn, Se-Se, Cd-Te, Cd-Se, Cd-Zn, Te-Se, Te-Zn, and Se-Zn adatom pairs on two CdTe(111) surfaces. An analysis of the interaction energies between binary adatom pairs suggests repulsive interactions are common regardless of the relative distance between adatoms. For the CdTe(111)A surface, attractive interactions occur between neighboring chalcogen (i.e., Te and Se) and Group 12 (i.e., Cd and Zn) adatom pairs. For the CdTe(111)B surface, attractive interactions occur between neighboring Group 12 adatoms forming a surface dimer configuration. Furthermore, the formation energy of an adatom pair is decomposed in terms of the electronic, elastic, and adatom binding contributions. For smaller interatomic distances between the adatoms, the formation energy is primarily a function of the electronic interactions, with null contributions from the elastic and adatom binding interactions for Group 12-containing pairs. Because of the less favorable electronic interactions for larger interatomic distances between the adatoms, the formation energies are typically more positive. Lastly, neighboring adatoms significantly increase the barriers of migration on the CdTe(111)A surface relative to unary adatoms for the top-to-fcc and fcc-to-fcc sites, while the migration barriers on the CdTe(111)B surface only increases for the fcc-to-fcc migration of chalcogen species. From this analysis, we illustrate the role of adatom interactions during the early stages of the surface nucleation processes on CdTe(111) thin films.

CdTe↗
DOE OSTI2026

Structural Phase Transitions in the van der Waals Ferromagnets Fe x Pd y Te 2

Two-dimensional van der Waals (vdW) magnets are attracting significant attention, both as platforms for studying fundamental magnetic interactions and for the exciting possibility of utilizing them as building blocks in devices and heterostructures, which may lead to new physical phenomena and functionalities. Here, we provide a detailed study of the crystal structure and physical properties of the recently discovered vdW ferromagnet FePd 2 Te 2 . We find this compound has a relatively wide width of formation, and grow single crystals with compositions Fe x Pd y Te 2 where x ranges from 0.9 to 1.1 and y from 1.8 to 2.5, respectively. Temperature-dependent X-ray diffraction and transport measurements reveal that a first-order structural transition occurs in the range of T = 360–420 K, where the critical temperature, modulation wave vector, and corresponding room-temperature crystal structures all depend on chemical composition. Above the transition, the compounds with Pd fraction y > 2 adopt a disordered derivative of the tetragonal FeTe structure, with the Fe layer showing mixed Fe/Pd occupancy and the extra Pd atoms partially occupying interstitial sites. Below 370 K, the structure is incommensurately modulated, likely associated with the complex ordering of Pd/Fe atoms in the metal layers or the interstitial Pd in the vdW gaps. For y < 2, the composition Fe 1.1 Pd 1.8 Te 2 has monoclinic symmetry at room temperature that is consistent with the reported structure of FePd 2 Te 2 . This phase undergoes a structural transition at 420 K for which the high temperature structure is yet to be determined; however, based on the similarities with the y > 2 compounds, we speculate that its T > 420 K structure is also tetragonal. Importantly, the high temperature, symmetry-breaking structural transition observed here provides a likely explanation for the origin of the structural domains previously observed in FePd 2 Te 2 . All compounds investigated in the Fe x Pd y Te 2 series show metallic behavior, with magnetic characterization indicating that they are easy-plane, hard, ferromagnets with T C spanning 98–180 K. Both the critical temperature for the structural transition and the Curie temperature are moderately suppressed with increasing Pd fraction y and corresponding decreasing Fe fraction x, indicating that synthetic control over x and y paves way for the further exploration of these compounds.

crystal structure↗
DOE OSTI2023

Interplay between Local Moment and Itinerant Magnetism in the Layered Metallic Antiferromagnet TaFe 1.14 Te 3

Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe 1+y Te 3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe 1+y Te 3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe 1.14 Te 3 reveal saturation magnetic fields ranging between 27-30 T with saturation magnetic moments of 2.05- 2.12 μ B . Magnetotransport measurements confirm TaFe 1.14 Te 3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. In conclusion, we demonstrate the ability to isolate few-layer sheets of TaFe 1.14 Te 3 , establishing TaFe 1.14 Te 3 as a potential platform for two-dimensional spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Atypical phase-change alloy Ga 2 Te 3 : atomic structure, incipient nanotectonic nuclei, and multilevel writing

Emerging brain-inspired computing, including artificial optical synapses, photonic tensor cores, neuromorphic networks, etc., needs phase-change materials (PCMs) of the next generation with lower energy consumption and a wider temperature range for reliable long-term operation. Gallium tellurides with higher melting and crystallization temperatures appear to be promising candidates and enable achieving the necessary requirements. Here, using high energy X-ray diffraction and Raman spectroscopy supported by first-principles simulations, we show that vitreous g-Ga 2 Te 3 films essentially have a tetrahedral local structure and sp 3 hybridization, similar to those in the stable fcc Ga 2 Te 3 polymorph and in contrast to a vast majority of typical PCMs. Nevertheless, optical pump–probe laser experiments revealed high-contrast, fast and reversible multilevel SET-RESET transitions raising a question related to the phase change mechanism. A recently observed nanotectonic compression in bulk glassy Ga–Te alloys seems to be responsible for the PCM performance. Incipient nanotectonic nuclei, reminiscent of monoclinic high-pressure HP-Te II and rhombohedral HP-Ga 2 Te 3 , are present as minorities (2–4%) in g-Ga 2 Te 3 but are suggested to grow dramatically with increasing temperature while interacting with appropriate laser pulses. This leads to co-crystallization of HP-polymorphs amplified by a high internal local pressure reaching 4–8 GPa. The metallic HP-forms provide an increasing optical and electrical contrast, favorable for reliable PCM operations, and higher energy efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Recent progress of MnBi 2 Te 4 epitaxial thin films as a platform for realising the quantum anomalous Hall effect

Since the first realisation of the quantum anomalous Hall effect (QAHE) in a dilute magnetic-doped topological insulator thin film in 2013, the quantisation temperature has been limited to less than 1 K due to magnetic disorder in dilute magnetic systems. With magnetic moments ordered into the crystal lattice, the intrinsic magnetic topological insulator MnBi 2 Te 4 has the potential to eliminate or significantly reduce magnetic disorder and improve the quantisation temperature. Surprisingly, to date, the QAHE has yet to be observed in molecular beam epitaxy (MBE)-grown MnBi 2 Te 4 thin films at zero magnetic field, and what leads to the difficulty in quantisation is still an active research area. Although bulk MnBi 2 Te 4 and exfoliated flakes have been well studied, revealing both the QAHE and axion insulator phases, experimental progress on MBE thin films has been slower. Furthermore, understanding how the breakdown of the QAHE occurs in MnBi 2 Te 4 thin films and finding solutions that will enable mass-produced millimetre-size QAHE devices operating at elevated temperatures are required. In this mini-review, we will summarise recent studies on the electronic and magnetic properties of MBE MnBi 2 Te 4 thin films and discuss mechanisms that could explain the failure of the QAHE from the aspects of defects, electronic structure, magnetic order, and consequences of their delicate interplay. Finally, we propose several strategies for realising the QAHE at elevated temperatures in MnBi 2 Te 4 thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

ZnGa 2 Te 4 thin-film absorbers for photoelectrochemical CO 2 reduction

Photoelectrochemical (PEC) carbon dioxide reduction reaction (CO 2 RR) has been considered as a promising route to convert and store solar energy into chemical fuels. It is crucial to find suitable photoelectrode materials that are photo-catalytically active and exhibit excellent photochemical stability. One of the promising contenders is ZnTe with the ∼2.26 eV band gap and prolonged stability under CO 2 RR PEC conditions. Herein, a new telluride based thin-film ZnGa 2 Te 4 photocathode with lower band gap and stronger visible light absorption compared to ZnTe is synthesized and characterized using a combinatorial sputtering technique. A two-step annealing method with excess Te supply is implemented to synthesize nearly stoichiometric ZnGa 2 Te 4 absorber material with a zincblende-derived tetragonal crystal structure confirmed by synchrotron X-ray and electron diffraction. Theoretical calculations show that ZnGa 2 Te 4 has suitable direct bandgap (∼1.86 eV) and high absorption coefficient ∼10 5 cm −1 , in agreement with experimentally prepared films. Transient absorption spectroscopy reveals the biexponential decay dynamics, with time constants, τ 1 ∼ 0.04, and τ 2 ∼ 0.65 μs in microsecond time scales and provides the optical transition pathways for this semiconductor thin film. PEC measurements show that the ZnGa 2 Te 4 photocurrent densities are comparable to the widely investigated ZnTe photocathodes or even surpass it under simulated sunlight condition. ZnGa 2 Te 4 samples demonstrate promising photoelectrochemical stability, maintaining consistent performance under illumination. The inclusion of diaryliodonium additive substantially increases its CO 2 RR selectivity to ∼60%. These findings open a new avenue for the synthesis of telluride-based thin-film photocathodes for further exploration and will motivate future research to integrate this potential photocathode material into PEC devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hydrazine-free precursor for solution-processed all-inorganic Se and Se 1− x Te x photovoltaics

Selenium (Se) has reemerged as a promising absorber material for indoor and tandem photovoltaics (PVs), and its alloys with Te (Se 1−x Te x ) offer a widely tunable bandgap. Solution processing of this materials system offers a route to low-cost fabrication. However, solution processing of Se has, thus far, only used hydrazine, which is an extremely hazardous solvent. In this work, we prepare and isolate propylammonium poly-Se and poly-Se–Te precursors from a safer thiol-amine solvent system. We formulate molecular inks by dissolving the precursor in dimethylformamide (DMF) with a monoethanolamine (EA) additive and process high-quality Se and Se 1−x Te x films with bandgaps ranging from 1.20 eV to 1.86 eV. We fabricate PVs from these films using TiO 2 and MoO 3 charge transport layers (CTLs) to achieve power conversion efficiencies as high as 2.73% for Se and 2.33% for Se 0.7 Te 0.3 under solar simulation. Se devices show excellent stability with no degradation after 1 month in air, enabled by the excellent stability of Se and the use of inorganic CTLs. This work represents an important step towards low-cost solution-phase processing of Se and Se 1−x Te x alloys for PVs and photodetectors with low toxicity and high bandgap tunability.

36 MATERIALS SCIENCE↗