Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tb”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Thermal Testing and Model Correlation of the Magnetospheric Multiscale (MMS) Observatories

International Conference on Envronmental Systems (ICES), Seattle WA NCTS 20964-15. The Magnetospheric Multiscale (MMS) mission is a Solar Terrestrial Probes mission comprising four identically instrumented spacecraft that will use Earths magnetosphere as a laboratory tostudy the microphysics of three fundamental plasma processes: magnetic reconnection, energetic particle acceleration, and turbulence. This paper presents the complete thermal balance (TB) test performed on the first of four observatories to go through thermal vacuum (TV) and the minibalance testing that was performed on the subsequent observatories to provide a comparison of all four. The TV and TB tests were conducted in a thermal vacuum chamber at the Naval Research Laboratory (NRL) in Washington, D.C. with the vacuum level higher than 1.3 x 10-4 Pa (10-6 torr)and the surrounding temperature achieving -180 C. Three TB test cases were performed that included hot operational science, cold operational science and a cold survival case. In addition to the three balance cases a two hour eclipse and a four hour eclipse simulation was performed during the TV test to provide additional transient data points that represent the orbit in eclipse (or Earth's shadow) The goal was to perform testing such that the flight orbital environments could be simulated as closely as possible. A thermal model correlation between the thermal analysis and the test results was completed. Over 400 1-Wire temperature sensors, 200 thermocouples and 125 flight thermistor temperature sensors recorded data during TV and TB testing. These temperatureversus time profiles and their agreements with the analytical results obtained using Thermal Desktop and SINDAFLUINT are discussed. The model correlation for the thermal mathematical model (TMM) is conducted based on the numerical analysis results and the test data. The philosophy of model correlation was to correlate the model to within 3 C of the test data using the standard deviation and mean deviation error calculation. Individual temperature error goal is to be within 5 C and the heater power goal is to be within 5 of test data. The results of the model correlation are discussed and the effect of some material and interface parameters on the temperature profiles are presented.

Thermal↗
NASA NTRS2015

Thermal Testing and Model Correlation of the Magnetospheric Multiscale (MMS) Observatories

The Magnetospheric Multiscale (MMS) mission is a Solar Terrestrial Probes mission comprising four identically instrumented spacecraft that will use Earth's magnetosphere as a laboratory to study the microphysics of three fundamental plasma processes: magnetic reconnection, energetic particle acceleration, and turbulence. This paper presents the complete thermal balance (TB) test performed on the first of four observatories to go through thermal vacuum (TV) and the minibalance testing that was performed on the subsequent observatories to provide a comparison of all four. The TV and TB tests were conducted in a thermal vacuum chamber at the Naval Research Laboratory (NRL) in Washington, D.C. with the vacuum level higher than 1.3 x 10 (sup -4) pascals (10 (sup -6) torr) and the surrounding temperature achieving -180 degrees Centigrade. Three TB test cases were performed that included hot operational science, cold operational science and a cold survival case. In addition to the three balance cases a two hour eclipse and a four hour eclipse simulation was performed during the TV test to provide additional transient data points that represent the orbit in eclipse (or Earth's shadow) The goal was to perform testing such that the flight orbital environments could be simulated as closely as possible. A thermal model correlation between the thermal analysis and the test results was completed. Over 400 1-Wire temperature sensors, 200 thermocouples and 125 flight thermistor temperature sensors recorded data during TV and TB testing. These temperature versus time profiles and their agreements with the analytical results obtained using Thermal Desktop and SINDA/FLUINT are discussed. The model correlation for the thermal mathematical model (TMM) is conducted based on the numerical analysis results and the test data. The philosophy of model correlation was to correlate the model to within 3 degrees Centigrade of the test data using the standard deviation and mean deviation error calculation. Individual temperature error goal is to be within 5 degrees Centigrade and the heater power goal is to be within 5 percent of test data. The results of the model correlation are discussed and the effect of some material and interface parameters on the temperature profiles are presented.

Correlation↗
NASA NTRS2017

Assimilation of Global Radar Backscatter and Radiometer Brightness Temperature Observations to Improve Soil Moisture and Land Evaporation Estimates

Active radar backscatter (s◦) observations from the Advanced Scatterometer (ASCAT) and passive radiometer brightness temperature (TB) observations from the Soil Moisture Ocean Salinity (SMOS) mission are assimilated either individually or jointly into the Global Land Evaporation Amsterdam Model (GLEAM) to improve its simulations of soil moisture and land evaporation. To enable s◦ and TB assimilation, GLEAM is coupled to the Water Cloud Model and the L-band Microwave Emission from the Biosphere (L-MEB) model. The innovations, i.e. differences between observations and simulations, are mapped onto the model soil moisture states through an Ensemble Kalman Filter. The validation of surface (0-10 cm) soil moisture simulations over the period 2010-2014 against in situ measurements from the International Soil Moisture Network (ISMN) shows that assimilating s◦ or TB alone improves the average correlation of seasonal anomalies (Ran) from 0.514 to 0.547 and 0.548, respectively. The joint assimilation further improves Ran to 0.559. Associated enhancements in daily evaporative flux simulations by GLEAM are validated based on measurements from 22 FLUXNET stations. Again, the singular assimilation improves Ran from 0.502 to 0.536 and 0.533, respectively for s◦ and TB, whereas the best performance is observed for the joint assimilation (Ran = 0.546). These results demonstrate the complementary value of assimilating radar backscatter observations together with brightness temperatures for improving estimates of hydrological variables, as their joint assimilation outperforms the assimilation of each observation type separately.

GLEAM↗
NASA NTRS2017

Evaluating a Priori Ozone Profile Information Used in TEMPO (Tropospheric Emissions: Monitoring of Pollution) Tropospheric Ozone Retrievals

A primary objective for TOLNet is the evaluation and validation of space-based tropospheric O3 retrievals from future systems such as the Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite. This study is designed to evaluate the tropopause-based O3 climatology (TB-Clim) dataset which will be used as the a priori profile information in TEMPO O3 retrievals. This study also evaluates model simulated O3 profiles, which could potentially serve as a priori O3 profile information in TEMPO retrievals, from near-real-time (NRT) data assimilation model products (NASA Global Modeling and Assimilation Office (GMAO) Goddard Earth Observing System (GEOS-5) Forward Processing (FP) and Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA2)) and full chemical transport model (CTM), GEOS-Chem, simulations. The TB-Clim dataset and model products are evaluated with surface (0-2 km) and tropospheric (0-10 km) TOLNet observations to demonstrate the accuracy of the suggested a priori dataset and information which could potentially be used in TEMPO O3 algorithms. This study also presents the impact of individual a priori profile sources on the accuracy of theoretical TEMPO O3 retrievals in the troposphere and at the surface. Preliminary results indicate that while the TB-Clim climatological dataset can replicate seasonally-averaged tropospheric O3 profiles observed by TOLNet, model-simulated profiles from a full CTM (GEOS-Chem is used as a proxy for CTM O3 predictions) resulted in more accurate tropospheric and surface-level O3 retrievals from TEMPO when compared to hourly (diurnal cycle evaluation) and daily-averaged (daily variability evaluation) TOLNet observations. Furthermore, it was determined that when large daily-averaged surface O3 mixing ratios are observed (65 ppb), which are important for air quality purposes, TEMPO retrieval values at the surface display higher correlations and less bias when applying CTM a priori profile information compared to all other data products. The primary reason for this is that CTM predictions better capture the spatio-temporal variability of the vertical profiles of observed tropospheric O3 compared to the TB-Clim dataset and other NRT data assimilation models evaluated during this study.

Pollution↗
NASA NTRS2018

Global Assessment of the SMAP Level-4 Soil Moisture Product Using Assimilation Diagnostics

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx. 2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

Reichle, Rolf↗
NASA NTRS2018

Using Data Assimilation Diagnostics to Assess the SMAP Level-4 Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission Level-4 Soil Moisture (L4_SM) product provides 3-hourly, 9-km resolution, global estimates of surface (0-5 cm) and root-zone (0-100 cm) soil moisture and related land surface variables from 31 March 2015 to present with approx.2.5-day latency. The ensemble-based L4_SM algorithm assimilates SMAP brightness temperature (Tb) observations into the Catchment land surface model. This study describes the spatially distributed L4_SM analysis and assesses the observation-minus-forecast (O-F) Tb residuals and the soil moisture and temperature analysis increments. Owing to the climatological rescaling of the Tb observations prior to assimilation, the analysis is essentially unbiased, with global mean values of approx. 0.37 K for the O-F Tb residuals and practically zero for the soil moisture and temperature increments. There are, however, modest regional (absolute) biases in the O-F residuals (under approx. 3 K), the soil moisture increments (under approx. 0.01 cu m/cu m), and the surface soil temperature increments (under approx. 1 K). Typical instantaneous values are approx. 6 K for O-F residuals, approx. 0.01 (approx. 0.003) cu m/cu m for surface (root-zone) soil moisture increments, and approx. 0.6 K for surface soil temperature increments. The O-F diagnostics indicate that the actual errors in the system are overestimated in deserts and densely vegetated regions and underestimated in agricultural regions and transition zones between dry and wet climates. The O-F auto-correlations suggest that the SMAP observations are used efficiently in western North America, the Sahel, and Australia, but not in many forested regions and the high northern latitudes. A case study in Australia demonstrates that assimilating SMAP observations successfully corrects short-term errors in the L4_SM rainfall forcing.

SMAP↗
NASA NTRS2018

Accounting for Static and Dynamic Open Water in the Modeling of SMAP Brightness Temperatures over Peatlands

Hydrological change in peatlands due to anthropogenic disturbance and global warming can release enormous amounts of greenhouse gas emissions. Passive microwave satellite observations are an opportunity to globally monitor these changes. Abundant static and dynamic open water surfaces in peatlands strongly affect observed brightness temperatures (Tb). Here, we account for these contributions in radiative transfer modeling using NASA's Goddard Earth Observing System Model version 5 (GEOS-5) static open water mask and, for the dynamic open water fraction, the simulated inundated area using a version of the GEOS-5 Catchment land surface model that has been modified for peatland areas (PEAT-CLSM). Modeled Tb is compared against two years of SMAP L-band Tb. Preliminary results indicate: (i) a bias reduction when including the static open water fraction in a simple RTM mixing model, and ii) significantly improved correlation between modeled and observed Tb when using land surface output from PEAT-CLSM instead of the operational CLSM.

passive microwave↗
NASA NTRS2019

Exploring the Utility of Machine Learning-Based Passive Microwave Brightness Temperature Data Assimilation over Terrestrial Snow in High Mountain Asia

This study explores the use of a support vector machine (SVM) as the observation operator within a passive microwave brightness temperature data assimilation framework (herein SVM-DA) to enhance the characterization of snow water equivalent (SWE) over High Mountain Asia (HMA). A series of synthetic twin experiments were conducted with the NASA Land Information System (LIS) at a number of locations across HMA. Overall, the SVM-DA framework is effective at improving SWE estimates (~70% reduction in RMSE relative to the Open Loop) for SWE depths less than 200 mm during dry snowpack conditions. The SVM-DA framework also improves SWE estimates in deep, wet snow (~45% reduction in RMSE) when snow liquid water is well estimated by the land surface model, but can lead to model degradation when snow liquid water estimates diverge from values used during SVM training. In particular, two key challenges of using the SVM-DA framework were observed over deep, wet snowpacks. First, variations in snow liquid water content dominate the brightness temperature spectral difference (TB) signal associated with emission from a wet snowpack, which can lead to abrupt changes in SWE during the analysis update. Second, the ensemble of SVM-based predictions can collapse (i.e., yield a near-zero standard deviation across the ensemble) when prior estimates of snow are outside the range of snow inputs used during the SVM training procedure. Such a scenario can lead to the presence of spurious error correlations between SWE and TB, and as a consequence, can result in degraded SWE estimates from the analysis update. These degraded analysis updates can be largely mitigated by applying rule-based approaches. For example, restricting the SWE update when the standard deviation of the predicted TB is greater than 0.05 K helps prevent the occurrence of filter divergence. Similarly, adding a thin layer (i.e., 5 mm) of SWE when the synthetic TB is larger than 5 K can improve SVM-DA performance in the presence of a precipitation dry bias. The study demonstrates that a carefully constructed SVM-DA framework cognizant of the inherent limitations of passive microwave-based SWE estimation holds promise for snow mass data assimilation.

Kwon, Yonghwan↗
NASA NTRS2019

Global Assimilation of L-Band Brightness Temperature Observations from SMAP and SMOS into the Catchment Land Surface Model and Contribution to the Skill of Soil Moisture Estimates

The Soil Moisture Active Passive (SMAP) and Soil Moisture Ocean Salinity (SMOS) missions provide global observations of L-band (1.4 GHz) passive microwave brightness temperature (Tb) observations at a resolution of ~40 km every 2-3 days. These observations have been available since 2015 from SMAP and since 2010 from SMOS.Soil moisture estimates from the separate assimilation of SMAP and SMOS Tb observations into land surface models were previously shown to improve over model-only estimates, thereby demonstrating the value of assimilating L-band Tb observations for soil moisture estimation. The assimilation experiments documented in the literature do not, however, establish whether the joint assimilation of SMAP and SMOS Tbs improves the skill of the resulting soil moisture estimates beyond what can be achieved with either set of observations alone. Moreover, because the published SMAP and SMOS results used different assimilation systems and configurations and applied different evaluation data and procedures, it is unclear whether the assimilation of SMAP-only or SMOS-only Tbs results in better soil moisture skill. In this presentation, we compare the results of three separate assimilation experiments for the period from April 2015 to present. The experiments utilize the SMAP Level-4 Soil Moisture (L4_SM) algorithm, which assimilates L-band Tb observations into the NASA Catchment land surface model using a spatially distributed ensemble Kalman filter. Specifically, the three experiments presented here assimilate (i) SMAP Tbs only, as in the L4_SM product, (ii) SMOS Tbs only, after interpolation of 40° incidence angle, and (iii) both SMAP and SMOS Tbs. In all other respects, the configuration of three experiments is identical, as is the validation of the output. Preliminary results suggest that the joint assimilation of SMAP and SMOS Tbs yields the most skillful soil moisture estimates when compared to independent in situ measurements. Moreover, the skill of the SMAP-only assimilation exceeds that of the SMOS-only assimilation. The presentation provides an in-depth evaluation of the skill of the assimilation estimates vs. independent in situ and satellite measurements and in terms of statistics of the observation-minus-forecast residuals and analysis increments.

Reichle, Rolf↗
NASA NTRS2019

Comparison of high-resolution airborne soil moisture retrievals to SMAP soil moisture during the SMAP validation experiment 2016 (SMAPVEX16)

The NASA's Soil Moisture Active Passive (SMAP) mission conducted a field experiment with its partners over two 40-km agricultural domains in Iowa and Manitoba in the summer of 2016 to address concerns observed in SMAP soil moisture (SM) retrievals over agricultural areas. The experiment featured airborne Passive Active L-band System (PALS) flights over each domain with intensive ground measurements and dense networks of SM monitoring stations. With two intensive observation periods separated in time (May 28–June 20 and July 14–August 16), the flights captured both early-season/low vegetation and later-season/high-vegetation conditions. The comparison of the PALS brightness temperature (TB) measurements to the SMAP TB observed over the sites resulted in root mean square difference (RMSD) of 2.8 K and 4.0 K for vertical and horizontal polarizations, respectively. The subsequent SM analysis rescaled the PALS TB with the SMAP TB to allow equitable comparisons between the SM retrievals from the two instruments. The PALS SM retrieval algorithm used the SM sampled by the ground teams during the overpass days for tuning, and was parameterized by a high-resolution vegetation water content product calibrated using vegetation samples collected during the experiment. The tuning process was not able to find a satisfactory result with a temporally constant set of parameters in the single channel algorithm for the two intensive observation periods of the experiment. This result indicated that the rapid change in the vegetation structure during the growth stages and likely variation in the surface roughness conditions were not compatible with rigid parameterization over the entire period. However, using seasonally variable parameters we found that it was possible to retrieve soil moisture with satisfactory accuracy. Comparative analysis with the SMAP SM product included aggregation of the PALS SM to the SMAP pixel-scale. The RMSD between the PALS SM and the aggregated manual field samples was <0.04 m3/m3 with Pearson correlation >0.85 for both sites. The comparison between different in situ sources indicated that the soil moisture network measurements were not the source of the large biases observed for SMAP over the sites reported in earlier studies. Therefore, the results suggested the rapidly growing vegetation and the early-season surface condition changes not captured by the SMAP algorithm caused the SMAP retrieval errors. In addition, the significant deviations of the vegetation water content used by the SMAP product from the calibrated vegetation water content obtained during the experiment compounds the problem.

Andreas Colliander↗
NASA NTRS2021

GOES-16 Observations of Rapidly-Intensifying Tropical Cyclones: Hurricanes Harvey (2017), Maria (2017), And Michael (2018)

This study utilizes brightness temperatures (Tb’s) observed by the infrared longwave window band (Ch 14; 11.2 m) from the Geostationary Operational Environmental Satellite-16 (GOES-16) to examine the structure of Hurricanes Harvey, Maria, and Michael throughout their lifetimes. During the times leading up to their rapid intensifications (RI), two-dimensional inner-core structures are examined to analyze the strength and location of the developing convection. Moderate vertical wind shear in the environments of Harvey and Michael induced a pronounced convective asymmetry prior to RI, followed by a rapid axisymmetrization that occurred essentially in conjunction with RI. The evolutions of the tropical cyclones’ (TCs’) coldest Tb’s indicate that the inner-core convective activity began to increase in the 12 h prior to RI onset, primarily in 2–4-h substantial “bursts”, while substantial convection dominated essentially the entirety of the region within 100 km of the surface center within 12 h of the onset of intensification. Azimuthally averaged Tb evolutions illustrate the development of each TCs’ eye and eyewall, the variability of the radial extent of the central dense overcast associated with the diurnal cycle, as well as details of the evolving convective structures throughout intensification. Hövmoller diagrams of data at constant radii reveal areas of cold Tb’s propagating around the TCs on timescales of 2–3-h. The examination of these features in a deep-layer shear-relative sense reveals that they initiate primarily downshear of the TCs’ surface centers. As RI is reached, these areas of convection are able to propagate into the upshear quadrants, which helps facilitate the onset of more substantial intensification.

Hurricanes↗
NASA NTRS2021

Assimilation of SMAP Brightness Temperature Observations in the GEOS Land–Atmosphere Data Assimilation System

Errors in soil moisture adversely impact the modeling of land–atmosphere water and energy fluxes and, consequently, near-surface atmospheric conditions in atmospheric data assimilation systems (ADAS). To mitigate such errors, a land surface analysis is included in many such systems, although not yet in the currently operational NASA Goddard Earth Observing System (GEOS) ADAS. This article investigates the assimilation of L-band brightness temperature (Tb) observations from the Soil Moisture Active Passive (SMAP) mission in the GEOS weakly coupled land–atmosphere data assimilation system (LADAS) during boreal summer 2017. The SMAP Tb analysis improves the correlation of LADAS surface and root-zone soil moisture versus in situ measurements by ∼0.1–0.26 over that of ADAS estimates; the unbiased root-mean-square error of LADAS soil moisture is reduced by 0.002–0.008 m^3 /m^3 from that of ADAS. Furthermore, the global land average RMSE versus in situ measurements of screen-level air specific humidity (q2m) and daily maximum temperature (T2m_max ) is reduced by 0.05 g/kg and 0.04 K, respectively, for LADAS compared to ADAS estimates. Regionally, the RMSE of LADAS q2m and T2m_max is improved by up to 0.4 g/kg and 0.3 K, respectively. Improvement in LADAS specific humidity extends into the lower troposphere (below ∼700 mb), with relative improvements in bias of 15–25%, although LADAS air temperature bias slightly increases relative to that of ADAS. Finally, the root mean square of the LADAS Tb observation-minus-forecast residuals is smaller by up to ∼0.1 K than in a land-only assimilation system, corroborating the positive impact of the Tb analysis on the modeled land–atmosphere coupling.

microwave remote sensing↗
NASA NTRSDate not supplied

Uncertainty Estimation for SMAP Level-1 Brightness Temperature Assimilation at Different Timescales

In this study, we assimilate Soil Moisture Active Passive (SMAP) mission brightness temperature (Tb) observations into NASA’s Catchment Land Surface Model using an Ensemble Kalman filter to update surface and root-zone soil moisture simulations. Different time series components of the Tb observations are assimilated including anomalies, inter-annual variations, and high-frequency variations. To optimize the weights that the data assimilation (DA) puts on the observations, the ratio between the un-certainties of modeled and observed Tb is approximated using modeled and observed soil moisture uncertainties estimated using triple collocation analysis. Results are compared to a benchmark experiment that mimics the operational SMAP Level-4 algorithm, which assimilates Tb observations using a spatially-constant 4 Kelvin (K) observation uncertainty. All DA experiments exhibit notable skill improvements in most regions. Improvements are greatest for the inter-annual variations in the simulations of both surface and root-zone soil moisture (mean improvements in terms of Pearson correlation (-) are 0.08 and 0.06, respectively). Anomaly simulations improve similarly (0.07), and improvements in the high-frequency variations are only observed for sur-face soil moisture simulations (0.06). Strikingly, however, no notable difference in skill—neither improvement nor deterioration—is observed between the experiments that use optimized observation uncertainty parameters and the 4 K benchmark experiment. We show, analytically, that this may be explained by the presence of large observation operator errors, which have the potential to render post-update uncertainty insensitive to inaccuracies in the Kalman gain.

Alexander Gruber↗
NASA NTRS2024

Classifying Microwave Radiometer Observations Over the Netherlands Into Dry, Shallow-, and Non-Shallow Precipitation Using A Random Forest Model

Spaceborne microwave radiometers represent an important component of the Global Precipitation Measurement (GPM) mission due to their frequent sampling of rain systems. Microwave radiometers measure microwave radiation (brightness temperatures, Tb), which can be converted into precipitation estimates with appropriate assumptions. However, detecting shallow precipitation systems using space-borne radiometers is challenging, especially over land, as their weak signals are hard to differentiate from those associated with dry conditions. This study uses a random forest model (RF) to classify microwave radiometer observations as dry, shallow, or nonshallow over the Netherlands - a region with varying surface conditions and frequent occurrence of shallow precipitation. The RF is trained on five years of data (2016-2020) and tested with two independent years (2015, 2021). The observations are classified using ground-based weather radar echo top heights. Various RF models are assessed, such as using only GPM’s Microwave Imager (GMI) Tb values as input features or including spatially aligned ERA-5 2-meter temperature and freezing level reanalysis and/or Dual Precipitation Radar (DPR) observations. Independent of the input features, the model performs best in summer and worst in winter. The model classifies observations from high-frequency channels (≥85 GHz) with lower Tb-values as non-shallow, higher values as dry, and those in between as shallow. Misclassified footprints exhibit radiometric characteristics corresponding to their assigned class. Case studies reveal dry observations misclassified as shallow are associated with lower Tb-values, likely resulting from the presence of ice particles in non-precipitating clouds. Shallow footprints misclassified as dry are likely related to the absence of ice particles.

Linda Bogerd↗
NASA NTRSDate not supplied

Geophysical Retrievals and Cloud Analyses from Merged Airborne Radiometer Datasets Covering 10–684 GHz

Airborne microwave radiometers provide insight about numerous aspects of Earth’s atmosphere and yield critical validation datasets for spaceborne radiometers. Three radiometers that are important to NASA’s airborne remote-sensing arsenal include: the Advanced Microwave Precipitation Radiometer (AMPR), covering 10–85 GHz; the Conical Scanning Millimeter-wave Imaging Radiometer (CoSMIR), covering 50–183 GHz; and the Compact Scanning Submillimeter-wave Imaging Radiometer (CoSSIR), covering 170–684 GHz. The NASA field campaigns of interest to this study include: the Integrated Precipitation and Hydrology Experiment (IPHEx) in 2014, the Olympic Mountains Experiment and Radar Definition Experiment (OLYMPEX/RADEX) in 2015–2016, the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) in 2020–2023, and the Airborne Lightning Observatory for FEGS and TGFs (ALOFT) in 2023. To provide a more comprehensive perspective on clouds and precipitation observed during these airborne field campaigns, AMPR data were merged spatiotemporally with CoSMIR data for IPHEx, OLYMPEX/RADEX, and IMPACTS (2020 and 2022), while considering differences in instrument characteristics and operations, providing brightness temperature (Tb) values from 10–183 GHz in a common background grid throughout each flight. AMPR and CoSSIR data were similarly merged for IMPACTS (2023) and ALOFT, providing a common background grid with Tb values covering 10–684 GHz throughout each flight. These merged Tb data were employed in geophysical retrievals using the Community Radiative Transfer Model (CRTM), an Eddington radiative transfer model, and a one-dimensional variational (1DVAR) inversion method. Retrievals of cloud liquid water path were of primary interest. This presentation will include an overview of the methods for the radiometer data mergers, the radiative transfer methods, the geophysical retrievals, and detailed results from examining trends in Tb and cloud liquid water path in clouds, precipitation, and cloud-to-precipitation transition zones.

Corey G Amiot↗
NASA NTRS1992

Reanalysis of x ray emission from M87 II: Multiphase models

In a previous paper by the authors (hereafter TB), it was shown that the hot intracluster gas around M87 could not be adequately explained in terms of a spherically symmetric, single phase model. It was found that although data from the Einstein satellite High Resolution Imager (HRI), Imaging Proportional Counter (IPC), and Focal Point Crystal Spectrometer (FPCS) could indeed be simultaneously explained by a single phase model, data from the Solid State Spectrometer (SSS) and optically determined mass estimates could not be similarly explained. A qualitative discussion was then given to indicate how the adoption of a specific multiphase model could plausibly improve upon the single phase model, but a detailed discussion was delayed until now. The x ray data is reanalyzed for the gas around M87 in the same spirit as the work in TB. That is, by assuming several cooling flow models, the shortcomings are improved upon. The procedure of TB was adopted and the data reanalyzed in the following manner: a multiphase model is assumed which can compute the surface brightness as seen by HRI and IPC. Also, the line fluxes can be computed of the lines seen by the FPCS and the mass profile after assuming hydrostatic equilibrium. The parameters of the model are then adjusted to fit the data. A check is then made to see whether the resulting model is consistent with the SSS spectrum and the equivalent width of the 7 keV complex of Fe lines as seen by large field of view instruments.

Tsai, John C.↗
NASA NTRS1990

Aircraft observations and cloud-microwave radiative model simulations of a deep convective system

A 3D cloud model is used to simulate the storm structure of the June 29, 1986 storm system observed during the Cooperative Huntsville Meteorological Experiment (Dodge et al., 1986), and the results are linked to a microwave radiative transfer model for simulating aircraft observations. The results of cloud and radiative model simulations are then compared with radar data and aircraft microwave observations, respectively. It is shown that the degree of agreement between model simulations and the aircraft microwave observations depends on the model-derived microphysics of cloud and precipitation. It is found that the calculated values of the brightness temperature (Tb) at 92 GHz are close to the observed temperatures, while the calculated Tb values at 18 and 37 GHz are lower than the observed Tb.

Yeh, H.-Y. M.↗
NASA NTRS1990

Precision intercomparisons between MSU channel 2 and radiosonde data over the United States

Results are presented of an intercomparison between MSU channel 2 Tb and radiosonde data taking both oxygen and water vapor absorption into account. A total of 45 stations covering most of the central and eastern U.S. were included. Precise comparisons (to 0.1 C or better) between MSU Tb and radiosonde-calculated Tb were found to be possible with large numbers of stations and long averaging periods (many months), although they are not sufficient in number to address the previously documented monthly precision of 0.01 C from satellite-satellite intercomparisons. The MSU channel 2 does not have a 1:1 response to atmospheric temperature variations; the response averages about 92 percent. No evidence was found to suggest that procedural or hardware changes in the U.S. radiosonde system have caused any widespread biases between 1980 and 1986.

Spencer, Roy W.↗