Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THRESHOLD CURRENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Beam breakup instability studies of powerful energy recovery linac for experiments

The maximum achievable beam current in an energy recovery linac (ERL) is often constrained by beam breakup (BBU) instability. Our previous research highlighted that filling patterns have a substantial impact on BBU instabilities in multipass ERLs. In this study, we extend our investigation to the eight-cavity model of the Powerful ERL for Experiment (PERLE). We evaluate its requirements for damping cavity higher order modes (HOMs) and propose optimal filling patterns and bunch timing strategies. Our findings reveal a significant new insight: while filling patterns are crucial, the timing of bunches also plays a critical role in mitigating HOM beam loading and BBU instability. This previously underestimated factor is essential for effective BBU control. We estimated the PERLE threshold current using both analytical and numerical models, incorporating the designed PERLE HOM dampers. During manufacturing, HOM frequencies are expected to vary slightly. Our study found no significant difference in BBU suppression for relative rms frequency jitters of 0.001, 0.002, and 0.005 for the same HOM. Introducing a jitter of 0.001 into our models, we found that the dampers effectively suppressed BBU instability, achieving a threshold current an order of magnitude higher than the design requirement. Our results offer new insights into ERL BBU beam dynamics and have important implications for the design of future ERLs. Published by the American Physical Society 2025

43 PARTICLE ACCELERATORS↗

Transverse BBU Suppression with Feedback for Energy Recovery Linacs

In this study, we present beam dynamics simulations of the Strong Hadron Cooling (SHC) Energy Recovery Linac (ERL) that incorporate a feedback (FB) system designed to mitigate Beam Breakup (BBU) instabilities. The FB effectively suppresses BBU and increases the threshold current by roughly an order of magnitude. Our analysis revealed the aliasing behavior of the dominant higher-order mode (HOM) and its suppression by the FB, as evident from the power spectral density (PSD) of the beam centroid’s horizontal motion at the exit of the final linac section. Although the FB system— even when affected by noise—successfully reduced the BBU peak, it also amplified the PSD at other frequencies. These results provide important insights into BBU suppression and threshold current enhancement in ERLs.

Setiniyaz, S. [Thomas Jefferson National Accelerat↗

Modeling of Sonos Memory Cell Erase Cycle

Silicon-oxide-nitride-oxide-silicon (SONOS) nonvolatile semiconductor memories (NVSMS) have many advantages. These memories are electrically erasable programmable read-only memories (EEPROMs). They utilize low programming voltages, endure extended erase/write cycles, are inherently resistant to radiation, and are compatible with high-density scaled CMOS for low power, portable electronics. The SONOS memory cell erase cycle was investigated using a nonquasi-static (NQS) MOSFET model. The SONOS floating gate charge and voltage, tunneling current, threshold voltage, and drain current were characterized during an erase cycle. Comparisons were made between the model predictions and experimental device data.

Phillips, Thomas A.↗

Low Tidal Current Speed Electricity Generation for Power at an Aquaculture Farm

Aquaculture farms are often located where tidal currents speeds are strong enough to ensure the currents supply fresh nutrients but not so strong that they harm the farm infrastructure. Traditional tidal turbines have cut-in speeds of 1 m/s and cannot generate electricity at current speeds below that threshold. Current energy converters that rely on vortex induced vibration (VIV) for movement can generate electricity at current speeds below 1 m/s. Here we discuss a project where researchers from the Pacific Northwest National Laboratory (PNNL) collaborate with researchers from the University of Michigan to investigate the feasibility of using a VIV current energy converter to generate electricity at an aquaculture farm. The VIV current energy converter uses flow induced oscillations of tandem cylinders and adaptive damping to harness the maximum horizontal marine hydrokinetic (MHK) energy by mimicking fish undulations. The current energy converter will be field tested and its power output measured over a range of current speeds. In addition to working with the University of Michigan, the PNNL researchers are collaborating with the Hog Island Oyster Company to assess their electricity usage and quantify the current energy resources at their Humboldt Bay facility. The electricity usage and current resource assessment at the aquaculture farm will be compared to the power produced by VIVACE to determine the feasibility of using VIVACE for power production at the farm.

Branch, Ruth A.↗

Utility of reactively sputtered CuN{sub x} films in spintronics devices

We have studied nitrified copper (CuN{sub x}) thin films grown by reactive sputtering in the context of spintronic devices. The Ar-to-N{sub 2} flow ratio enables tunability of the electrical resistivity and surface roughness of the CuN{sub x} films, with the former increasing to nearly 20 times that of Cu, and the latter reduced to the atomic scale. Incorporating this into a Ta/CuN{sub x}/Ta seed stack for spin valves improves the current-in-plane (CIP) magnetoresistance; maximum magnetoresistance results with CuN{sub x} seed layer and Cu interlayer. Finally, finite element modeling results are presented that suggest the use of CuN{sub x} in nanocontact spin torque oscillators can enhance current densities by limiting the current spread through the device. This may positively impact threshold currents, power requirements, and device reliability.

36 MATERIALS SCIENCE↗

Vertical-Cavity Surface-Emitting 1.55-μm Lasers Fabricated by Fusion

The results of studies on fabrication of vertical-cavity surface-emitting 1.55-μm lasers by fusing AlGaAs/GaAs distributed-Bragg-reflector wafers and an active region based on thin In{sub 0.74}Ga{sub 0.26} As quantum wells grown by molecular-beam epitaxy are presented. Lasers with a current aperture diameter of 8 μm exhibit continuous lasing with a threshold current below 1.5 mA, an output optical power of 6 mW, and an efficiency of approximately 22%. Single-mode lasing with a side-mode suppression ratio of 40–45 dB is observed in the entire operating current range. The effective modulation frequency of these lasers is as high as 9 GHz and is limited by the low parasitic cutoff frequency and self-heating.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Output power of a quantum dot laser: Effects of excited states

A theory of operating characteristics of quantum dot (QD) lasers is discussed in the presence of excited states in QDs. We consider three possible situations for lasing: (i) ground-state lasing only; (ii) ground-state lasing at first and then the onset of also excited-state lasing with increasing injection current; (iii) excited-state lasing only. The following characteristics are studied: occupancies of the ground-state and excited-state in QDs, free carrier density in the optical confinement layer, threshold currents for ground- and excited-state lasing, densities of photons emitted via ground- and excited-state stimulated transitions, output power, internal and external differential quantum efficiencies. Under the conditions of ground-state lasing only, the output power saturates with injection current. Under the conditions of both ground- and excited-state lasing, the output power of ground-state lasing remains pinned above the excited-state lasing threshold while the power of excited-state lasing increases. There is a kink in the light-current curve at the excited-state lasing threshold. The case of excited-state lasing only is qualitatively similar to that for single-state QDs—the role of ground-state transitions is simply reduced to increasing the threshold current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Terahertz GaAs/AlAs quantum-cascade lasers

We have realized GaAs/AlAs quantum-cascade lasers operating at 4.75 THz exhibiting more than three times higher wall plug efficiencies than GaAs/Al{sub 0.25}Ga{sub 0.75}As lasers with an almost identical design. At the same time, the threshold current density at 10 K is reduced from about 350 A/cm{sup 2} for the GaAs/Al{sub 0.25}Ga{sub 0.75}As laser to about 120 A/cm{sup 2} for the GaAs/AlAs laser. Substituting AlAs for Al{sub 0.25}Ga{sub 0.75}As barriers leads to a larger energy separation between the subbands reducing the probability for leakage currents through parasitic states and for reabsorption of the laser light. The higher barriers allow for a shift of the quasi-continuum of states to much higher energies. The use of a binary barrier material may also reduce detrimental effects due to the expected composition fluctuations in ternary alloys.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonequilibrium phonon effects in midinfrared quantum cascade lasers

We investigate the effects of nonequilibrium phonon dynamics on the operation of a GaAs-based midinfrared quantum cascade laser over a range of temperatures (77–300 K) via a coupled ensemble Monte Carlo simulation of electron and optical-phonon systems. Nonequilibrium phonon effects are shown to be important below 200 K. At low temperatures, nonequilibrium phonons enhance injection selectivity and efficiency by drastically increasing the rate of interstage electron scattering from the lowest injector state to the next-stage upper lasing level via optical-phonon absorption. As a result, the current density and modal gain at a given field are higher and the threshold current density lower and considerably closer to experiment than results obtained with thermal phonons. By amplifying phonon absorption, nonequilibrium phonons also hinder electron energy relaxation and lead to elevated electronic temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Balance-equation method for simulating terahertz quantum-cascade lasers using a wave-function basis with reduced dipole moments of tunnel-coupled states

A model based on a system of balance equations for localised and continuum states is developed to calculate the current − voltage (I − V) and power characteristics of quantum-cascade lasers (QCLs) operating in the terahertz (THz) range. A method for modifying the eigenbasis of the Schrödinger equation by reducing the dipole moments of tunnel-coupled states is proposed to take into account the effect of dephasing on the carrier transport. The calculated and experimental data on the current − voltage characteristics and the dependence of the integrated radiation intensity on current for the THz QCLs lasing at 2.3 THz are compared. The calculated and measured values of the threshold current, lasing current range, and maximum operating temperature T{sub max} are found to be in good agreement. It is shown that T{sub max} can be increased by 25 % by reducing the thickness of the top contact layer n{sup +}-GaAs of the laser structure under study from 800 to 100 nm. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-power terahertz quantum cascade lasers with ∼0.23 W in continuous wave mode

Terahertz quantum cascade lasers with a record output power up to ∼0.23 W in continuous wave mode were obtained. We show that the optimal 2.9-mm-long device operating at 3.11 THz has a low threshold current density of 270 A/cm{sup 2} at ∼15 K. The maximum operating temperature arrived at ∼65 K in continuous wave mode and the internal quantum efficiencies decreased from 0.53 to 0.19 for the devices with different cavity lengths. By using one convex lens with the effective focal length of 13 mm, the beam profile was collimated to be a quasi Gaussian distribution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-power cw laser bars of the 750 - 790-nm wavelength range

We have developed the effective design of semiconductor heterostructures, which allow one to fabricate cw laser diodes emitting in the 750 - 790-nm spectral range. The optimal conditions for fabrication of GaAsP/AlGaInP/GaAs heterostructures by MOCVD have been determined. It is shown that the use of quantum wells with a precisely defined quantity mismatch reduces the threshold current density and increases the external differential efficiency. The results of studies of characteristics of diode laser bars fabricated from these heterostructures are presented. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Emission properties of heterostructures with a (GaAsSb-InGaAs)/GaAs bilayer quantum well

The specific features of the emission characteristics of GaAs-based heterostructures with a GaAs{sub 1-x}Sb{sub x}-In{sub y}Ga{sub 1-y}As bilayer quantum well are studied. The heterostructures are grown by metal-organic chemical vapor deposition (MOCVD). With an analysis of previously reported data on the MOCVD growth process taken into account, the temperature range (560-580 Degree-Sign C), the relation between the fluxes emitted by the sources of Group-V and -III elements ( Less-Than-Or-Equivalent-To 1), and the order of layer growth for the production of the active region of a GaAs/InGaP laser heterostructure are determined experimentally. The active region is a GaAs{sub 0.75}Sb{sub 0.25}-In{sub 0.2}Ga{sub 0.8}As bilayer quantum well. For the structure, a 1075-nm electroluminescence signal attributed to indirect transitions between the valence band of the GaAs{sub 0.75}Sb{sub 0.25} layer and the conduction band of the In{sub 0.2}Ga{sub 0.8}As layer is observed. An increase in the continuous-wave pump current yields a decrease in the 1075-nm emission intensity and initiates stable lasing at a wavelength of 1022 nm at a threshold current density of 1.4 kA cm{sup -2} at room temperature. Lasing occurs at transitions direct in coordinate space.

36 MATERIALS SCIENCE↗

Low-threshold short-cavity diode laser for a miniature atomic clock

Short-cavity diode lasers (SCDLs) emitting at the 894-nm D{sub 1} line of caesium are developed. Low threshold currents and power consumption will make it possible to use these lasers in chip-size atomic clocks (CSACs) and magnetometers. The SCDL parameters are comparable with the parameters of surface-emitting lasers. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Quantum cascade laser based on GaAs/Al{sub 0.45}Ga{sub 0.55}As heteropair grown by MOCVD

A pulsed quantum cascade laser emitting in the wavelength range 9.5–9.7 μm at 77.4 K is developed based on the GaAs/Al{sub 0.45}Ga{sub 0.55}As heteropair. The laser heterostructure was grown by MOCVD. The threshold current density was 1.8 kA cm{sup -2}. The maximum output power of the laser with dimensions of 30 μm × 3 mm and with cleaved mirrors exceeded 200 mW. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum dot lasers with asymmetric barrier layers: Close-to-ideal threshold and power characteristics

A theory of static (threshold and power) characteristics of novel diode lasers – quantum dot (QD) lasers with asymmetric barrier layers (ABLs) – is developed. The barrier layers are asymmetric in that they have considerably different heights for the carriers of opposite signs. The ABL located on the electron- (hole-) injecting side of the structure provides a low barrier (ideally no barrier) for electrons (holes) [so that it does not prevent electrons (holes) from easily approaching the active region] and a high barrier for holes (electrons) [so that holes (electrons) injected from the opposite side of the structure do not overcome it]. The use of ABLs should thus ideally prevent the simultaneous presence of electrons and holes (and hence parasitic electron – hole recombination) outside the QDs. It is shown in this work that in such a case of total suppression of parasitic recombination, the QD lasers with ABLs offer close-to-ideal performance: the threshold current density is below 10 A cm{sup −2} at any temperature, the absolute value of the characteristic temperature is above 1000 K (which manifests a virtually temperature-independent operation), the internal differential quantum efficiency is practically unity, and the light – current characteristic is linear at any pump current. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Matrices of 960-nm vertical-cavity surface-emitting lasers

Matrices of vertical-cavity surface-emitting lasers with individual addressing of elements and radiation output through a gallium arsenide substrate are implemented. Individual laser emitters with a current aperture diameter of 6-7 {mu}m exhibit continuous-wave room-temperature lasing at a wavelength of 958-962 nm with threshold currents of 1.1-1.3 mA, differential efficiency of 0.5-0.8 mW/mA, and a maximum output power of 7.5-9 mW. The parameter variation of individual emitters within a matrix chip containing 5 Multiplication-Sign 7 elements does not exceed {+-}20%.

36 MATERIALS SCIENCE↗