Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Tracking the Influence of Thermal Expansion and Oxygen Vacancies on the Thermal Stability of Ni-Rich Layered Cathode Materials

The ever-growing demand for high-energy lithium-ion batteries in portable electronics and electric vehicles has triggered intensive research efforts over the past decade. An efficient strategy to boost the energy and power density of lithium-ion batteries is to increase the Ni content in the cathode materials. However, a higher Ni content in the cathode materials gives rise to safety issues. Herein, thermal expansion and oxygen vacancies are proposed as new critical factors that affect the thermal stability of charged Ni-rich cathode materials based on a systematic synchrotron-based X-ray study of Li 0.33 Ni 0.5+x Co 0.2 Mn 0.3-x O 2 (x = 0, 0.1, 0.2) cathode materials during a heating process. Charged cathode materials with higher Ni contents show larger thermal expansion, which accelerates transition metal migration to the Li layers. Oxygen vacancies are formed and accumulate mainly around Ni ions until the layered-to-spinel phase transition begins. The oxygen vacancies also facilitate transition metal migration to the Li layers. Thermal expansion and the presence of oxygen vacancies decrease the energy barrier for cation migration and facilitate the phase transitions in charged cathode materials during the heating process. These results provide valuable guidance for developing new cathode materials with improved safety characteristics.

25 ENERGY STORAGE↗

Crystal Structure Evolution and Notable Thermal Expansion in Hybrid Perovskites Formamidinium Tin Iodide and Formamidinium Lead Bromide

The temperature-dependent structure evolution of the hybrid halide perovskite compounds, formamidinium tin iodide (FASnI 3 , FA + = CH[NH 2 ] 2 + ) and formamidinium lead bromide (FAPbBr 3 ), has been monitored using high-resolution synchrotron X-ray powder diffraction between 300 and 100 K. The data are consistent with a transition from cubic Pm$\bar{3}$m (No. 221) to tetragonal P 4 /mbm (No. 127) for both materials upon cooling; this occurs for FAPbBr 3 between 275 and 250 K, and for FASnI 3 between 250 and 225 K. Upon further cooling, between 150 and 125 K, both materials undergo a transition to an orthorhombic Pnma (No. 62) structure. The transitions are confirmed by calorimetry and dielectric measurements. In the tetragonal regime, the coefficients of volumetric thermal expansion of FASnI 3 and FAPbBr 3 are among the highest recorded for any extended inorganic crystalline solid, reaching 219 ppm K –1 for FASnI 3 at 225 K. Atomic displacement parameters of all atoms for both materials suggest dynamic motion is occurring in the inorganic sublattice due to the flexibility of the inorganic network and dynamic lone pair stereochemical activity on the B-site. Unusual pseudocubic behavior is displayed in the tetragonal phase of the FAPbBr 3 , similar to that previously observed in FAPbI 3 .

36 MATERIALS SCIENCE↗

Thermal expansion coefficients of high thermal conducting BAs and BP materials

Recently reported very high thermal conductivities in cubic boron arsenide (BAs) and boron phosphide (BP) crystals could potentially provide a revolutionary solution in the thermal management of high power density devices. To fully facilitate such an application, the compatible coefficient of thermal expansion (CTE) between the heat spreader and the device substrate, in order to minimize the thermal stress, needs to be considered. Here, we report our experimental CTE studies of BAs and BP in the temperature range from 100 K to 1150 K, through a combination of X-ray single crystal diffraction and neutron powder diffraction. Here, we demonstrated that the room temperature CTEs, 3.6 ± 0.15 × 10 –6 /K for BAs and 3.2 ± 0.2 × 10 –6 /K for BP, are more compatible with most of the semiconductors including Si and GaAs, in comparison with diamond, and thus could be better candidates for the future heat spreader materials in power electronic devices.

36 MATERIALS SCIENCE↗

Lattice-structures and constructs with designed thermal expansion coefficients

A thermal expansion-managed lattice structure having a plurality of unit cells each having flexure bearing-mounted tabs supported on a base and actuated by thermal expansion of an actuator having a thermal expansion coefficient greater than the base and arranged so that the tab is inwardly displaced into a base cavity. The flexure bearing-mounted tabs are connected to other flexure-bearing-mounted tabs of adjacent unit cells so that the adjacent unit cells are spaced from each other to accommodate thermal expansion of individual unit cells while maintaining a desired bulk thermal expansion coefficient of the lattice structure as a whole.

42 ENGINEERING↗

Assessment and Accommodation of Thermal Expansion of the Internal Active Thermal Control System Coolant During Launch to On-Orbit Activation of International Space Station Elements

The International Space Station (ISS) employs an Internal Active Thermal Control System (IATCS) comprised of several single-phase water coolant loops. These coolant loops are distributed throughout the ISS pressurized elements. The primary element coolant loops (i.e., US Laboratory module) contain a fluid accumulator to accommodate thermal expansion of the system. Other element coolant loops are parasitic (i.e., Airlock), have no accumulator, and require an alternative approach to insure that the system Maximum Design Pressure (MDP) is not exceeded during the Launch to Activation phase. During this time the element loop is a stand alone closed individual system. The solution approach for accommodating thermal expansion was affected by interactions of system components and their particular limitations. The mathematical solution approach was challenged by the presence of certain unknown or not readily obtainable physical and thermodynamic characteristics of some system components and processes. The purpose of this paper is to provide a brief description of a few of the solutions that evolved over time, a novel mathematical solution to eliminate some of the unknowns or derive the unknowns experimentally, and the testing and methods undertaken.

Edwards, J. Darryl↗

Assessment and Accommodation of Thermal Expansion of the Internal Active Thermal Control System Coolant During Launch to On-Orbit Activation of International Space Station Elements

The International Space Station (ISS) employs an Internal Active Thermal Control System (IATCS) comprised of several single-phase water coolant loops. These coolant loops are distributed throughout the ISS pressurized elements. The primary element coolant loops (i.e. U.S. Laboratory module) contain a fluid accumulator to accomodate thermal expansion of the system. Other element coolant loops are parasitic (i.e. Airlock), have no accumulator, and require an alternative approach to insure that the system maximum design pressure (MDP) is not exceeded during the Launch to Activation (LTA) phase. During this time the element loops is a stand alone closed system. The solution approach for accomodating thermal expansion was affected by interactions of system components and their particular limitations. The mathematical solution approach was challenged by the presence of certain unknown or not readily obtainable physical and thermodynamic characteristics of some system components and processes. The purpose of this paper is to provide a brief description of a few of the solutions that evolved over time, a novel mathematical solution to eliminate some of the unknowns or derive the unknowns experimentally, and the testing and methods undertaken.

Edwards, Darryl↗

A review of the thermal expansion of magnetite

Thermal expansion data from various sources were placed on an equivalent basis and fitted true (α T ) and mean (α M ) coefficients of thermal expansion were generated. Recent models of oxide spallation in boiler tubes cite and use Central Electricity Generating Board (CEGB) data for αM, but details of how the CEGB data was generated were not known. Here, the CEGB data were found to be derived from an earlier source but given (unconventionally) in terms of small temperature step α M increments.

36 MATERIALS SCIENCE↗

Ab-initio study of thermal expansion in pure graphene

Graphene is a zero band gap semiconductor with exceptionally high thermal conductivity. The electronic properties having been studied, therole of phonon in contributing to thermal expansion, thermal conductivity and other thermodynamic properties, is required to be investigated. This paper focuses more on thermal expansion. Some others results like phonon dispersion, Grüneisenparameters and bulk modulus,which are essential to estimation of thermal expansion, are also presented. The dynamical matrix was calculated using VASP code using both DFT and DFPT and the phonon frequencies were calculated using phonopy code under harmonic approximation. The linear thermal expansion coefficient of graphene is found to be strongly dependent on temperature but remains negative upto 470 K and positive thereafter, with a room temperature value of −1.44×10{sup −6}. The negative expansion coefficient is very interesting and is found to be in conformity with experimental as well as with recent theoretical estimates. There is only qualitative agreement of our results with experimental data and motivates further investigation, primarily on the high negative values of Grüneisen parameters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlled Thermal Expansion Coat for Thermal Barrier Coatings

A improved thermal barrier coating and method for producing and applying such is disclosed herein. The thermal barrier coating includes a high temperature substrate, a first bond coat layer applied to the substrate of MCrAlX, and a second bond coat layer of MCrAlX with particles of a particulate dispersed throughout the MCrAlX and the preferred particulate is Al2O3. The particles of the particulate dispersed throughout the second bond coat layer preferably have a diameter of less then the height of the peaks of the second bond coat layer, or a diameter of less than 5 microns. The method of producing the second bond coat layer may either include the steps of mechanical alloying of particles throughout the second bond coat layer, attrition milling the particles of the particulate throughout the second bond coat layer, or using electrophoresis to disperse the particles throughout the second bond coat layer. In the preferred embodiment of the invention, the first bond coat layer is applied to the substrate, and then the second bond coat layer is thermally sprayed onto the first bond coat layer. Further, in a preferred embodiment of die invention, a ceramic insulating layer covers the second bond coat layer.

Brindley, William J.↗

Method of Producing Controlled Thermal Expansion Coat for Thermal Barrier Coatings

An improved thermal barrier coating and method for producing and applying such is disclosed herein. The thermal barrier coatings includes a high temperature substrate, a first bond coat layer applied to the substrate of MCrAlX and a second bond coat layer of MCrAlX with particles of a particulate dispersed throughout the MCrAlX and the preferred particulate is Al2O3. The particles of the particulate dispersed throughout the second bond coat layer preferably have a diameter of less then the height of the peaks of the second bond coat layer or a diameter of less than 5 micron. The method of producing the second bond coat layer may either include the steps of mechanical alloying of particles throughout the second bond coat layer, attrition milling the particles of the particulate throughout the second bond coat layer, or using electrophoresis to disperse the particles throughout the second bond coat layer. In the preferred embodiment of the invention the first bond coat layer is applied to the substrate. and then the second bond coat layer is thermally sprayed onto the first bond coat layer. Further, in a preferred embodiment of the invention a ceramic insulating layer covers the second bond coat layer.

Brindley, William J.↗

Tunable thermal expansion in framework materials through redox intercalation

Thermal expansion properties of solids are of fundamental interest and control of thermal expansion is important for practical applications but can be difficult to achieve. Many framework type materials show negative thermal expansion when internal cages are empty but positive thermal expansion when additional atoms or molecules fill internal voids present, offering a potential route for control. Here we show that redox intercalation offers an effective method to control thermal expansion from positive to zero to negative by insertion of Li ions into the simple negative thermal expansion framework material ScF 3 , doped with 10% Fe to enable reduction. The small concentration of intercalated Li ions has a strong influence through steric hindrance of transverse fluoride ion vibrations, which directly controls the thermal expansion. As a result, redox intercalation of guest ions is thus likely to be a general and effective method for controlling thermal expansion in the many known framework materials with phonon-driven negative thermal expansion.

36 MATERIALS SCIENCE↗

Thermal Expansion Anomaly Regulated by Entropy

Thermal expansion, defined as the temperature dependence of volume under constant pressure, is a common phenomenon in nature and originates from anharmonic lattice dynamics. However, it has been poorly understood how thermal expansion can show anomalies such as colossal positive, zero, or negative thermal expansion (CPTE, ZTE, or NTE), especially in quantitative terms. Here we show that changes in configurational entropy due to metastable micro(scopic)states can lead to quantitative prediction of these anomalies. We integrate the Maxwell relation, statistic mechanics and first-principles calculations to demonstrate that when the entropy is increased by pressure, NTE occurs such as in Invar alloy (Fe3Pt, for example), silicon, ice and water and when the entropy is decreased dramatically by pressure, CPTE is expected such as in anti-Invar cerium, ice and water. Our findings provide a theoretic framework to understand and predict a broad range of anomalies in nature in addition to thermal expansion, which may include gigantic electrocaloric and electromechanical responses, anomalously reduced thermal conductivity and spin distributions.

Science & Technology - Other Topics↗

Tailored thermal expansion alloys

Current approaches to tailoring the thermal expansion coefficient of materials or finding materials with negative thermal expansion rely on careful manipulation of either the material's composition and/or the complex fabrication of composites. By contrast, we report a new principle that enables the precise control of macroscopic thermal expansion response of bulk materials via crystallographic texture manipulation and by taking advantage of anisotropic Coefficients of Thermal Expansion (CTE) in a large class of martensitically transforming materials. Through simple thermo-mechanical processing, it is possible to tailor the thermal expansion response of a single material––without manipulating its composition––over a wide range of positive and negative values. We demonstrate this principle by gradually tuning the macroscopic CTE in a model NiTiPd alloy between a positive (+14.90 × 10 -6 K -1 ) and a negative (-3.06 × 10 -6 K -1 ) value, simply by incrementally increasing tensile plastic deformation in the martensite phase. This surprising response is linked to the large positive, +51.33 × 10 -6 K -1 , and negative, -34.51 × 10 -6 K -1 , CTE anisotropy, at the lattice level, along the different crystal directions in martensite. Similar CTE anisotropy is also shown experimentally in CoNiGa and TiNb alloys. In a model TiNb alloy, giant macroscopic CTEs of +181 × 10 -6 K -1 and -142 × 10 -6 K -1 are measured. A connection between the CTE anisotropy and the martensitic transformation in these and other materials systems such as NiTi, pure uranium, and PbTiO 3 is later made. It is shown that negative or positive thermal expansion crystallographic directions are connected to the crystallographic relationship between the austenite and martensite lattices, and can easily be predicted using the lattice parameters of austenite and martensite phases. Our current observations and analyses suggest that the tunability of the macroscopic CTE through thermo-mechanical processing is universal in materials––both ceramic and metals––that undergo martensitic transformations

36 MATERIALS SCIENCE↗