Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THALLIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Neutron Induced Nuclear Reaction Cross Sections for Radiochemistry in the Region of Thallium, Lead, and Bismuth

We have developed a set of modeled nuclear reaction cross sections for use in radiochemical detector diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model developed in the TALYS code system are used to calculate neutron induced nuclear reaction cross sections for targets ranging from Thallium (Z = 81) to Bismuth (Z = 83).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Evaluation of thallium-201 scanning for detection of latent coronary artery disease

The use of thallium imaging as a noninvasive method to accurately screen shuttle passengers for latent coronary artery disease was investigated. All radionuclide procedures were performed using an Anger type camera with a high resolution collimator. A minimum of 200,000 counts were collected for each image using a 20% window centered on the 69-83 keV X-rays. For the images obtained following injection with the patient at rest, the testing was begun 10 minutes after injection. Injections of TT during exercise were made at a point near the termination of the treadmill procedure as determined by either the appearance of ST segment changes on the electrocardiogram consistant with subendocardial ischemia, the appearance of angina-like chest pain in the patient or fatigue in the patient which required cessation of the test. The severity of heart disease was based on the medical history, physical exam, exercise electrocardiograms, chest X-rays and the coronary arteriogram.

Johnson, P. C.↗

Engineering and design properties of thallium-doped sodium iodide and selected properties of sodium-doped cesium iodide

Mechanical and thermal properties, not available in the literature but necessary to structural design, using thallium doped sodium iodide and sodium doped cesium iodide were determined to be coefficient of linear thermal expansion, thermal conductivity, thermal shock resistance, heat capacity, elastic constants, ultimate strengths, creep, hardness, susceptibility to subcritical crack growth, and ingot variation of strength. These properties were measured for single and polycrystalline materials at room temperature.

Forrest, K.↗

Mechanical testing of large thallium doped sodium iodide single crystals

The findings of mechanical tests performed on five thallium-doped sodium iodide NaI(Tl) crystals are presented. These crystals are all in the shape of circular flat plates, 20.0 in. in diameter an d0.5 in. thick. The test setup, testing procedure, and the test data are presented. Large crystals exhibit a high degree of material plasticity, as well as a much higher strength than previously anticipated, on the order of 500 psi. Also revealed from the testing is the fact that crystal with a large number of grain boundaries developed less plasticity, and therefore less permanent deformation, than those with fewer grain boundaries.

Lee, H. M.↗

Infrared Attenuation Of Thallium Bromoiodide Fibers

Report presents measurements of attenuation of infrared signals in unclad 381-micrometer-diameter optical fibers of thallium bromoiodide. Measurements of attentuation in TI(Br,I) fibers in wavelength ranges of 1.2 to 3.4 micrometer and 3 to 11 micrometer compare with those of two other groups of researchers.

Goebel, John↗

Selective surface treatment of thallium bromide (TLBR)-based detectors to improve longevity and/or restore operational capacity thereof

In various approaches room-temperature gamma detector longevity may be improved by selectively removing, or selectively incorporating, alternate halogen component(s) from select surfaces of the detector. According to one embodiment, a method of improving operational longevity of a thallium bromide (TlBr)-based detector includes: selectively treating one or more surfaces of the TlBr-based detector to produce a surface substantially comprising pure TlBr. Similar techniques may be employed to restore a degraded or failed detector. According to another embodiment, a method of forming a TlBr-based detector exhibiting improved operational longevity includes: selectively treating one or more surfaces of the TlBr-based detector to replace Br therein with one or more alternate halogen components while also substantially avoiding replacing some or all of the Br in other surfaces of the TlBr-based detector with the one or more alternate halogen components. Corresponding structures for TlBr-based detectors with improved longevity are also described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thallium Bromide Semiconductor Radiation Materials and Detectors Characterization Studies

Two overarching requirements of crucial importance for the commercial and scientific establishment of semiconductor radiation detectors are: (1) exceptionally high-purity crystals with impurity concentrations less than 1 part-per-billion and (2) single crystals that are relatively free from subgrain boundaries, secondary phases, dislocations, and other electrically-active defects. We investigated the properties of thallium bromide (TlBr) material that affect its performance with the goal of increasing the material's commercial viability for radiation detection applications. For this purpose, we used beamlines at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory (BNL), performing Micron-scale X-ray Detector Mapping, White Beam X-ray Diffraction Topography, and Micron-scale X-ray Fluorescence. These characterization methods improve the industry's understanding of TlBr and lead to the production of improved instrumentation. In this particular study we report electro-migration measurements of positive-ion Cu, Ag, and Au impurities in TlBr detectors under electric field strengths typically used for device operation. BNL improved TlBr detectors with an electrode design that corrects the response non-uniformities caused by crystal defects. This design can achieve improved energy resolution while using typical-grade, commercial crystals with relaxed quality requirements, thus reducing the overall cost of detectors. Additional characterization will be necessary to fully understand the structure and performance of TlBr with the ultimate goal to achieve the highest energy resolution. Our findings from past work will be presented along with our recommendations for additional investigation.

36 MATERIALS SCIENCE↗

Calculation of the (T,P)-odd electric dipole moment of thallium and cesium

Parity and time invariance violating electric dipole moment of {sup 205}Tl is calculated using the relativistic Hartree-Fock and configuration interaction methods and the many-body perturbation theory. Contributions from the interaction of the electron electric dipole moments with internal electric field and scalar-pseudoscalar electron-nucleon (T,P)-odd interaction are considered. The results are d({sup 205}Tl)=-582(20)d{sub e} or d({sup 205}Tl)=-7.0(2)x10{sup -18}C{sup SP}e cm. Interpretation of the measurements are discussed. The results of similar calculations for {sup 133}Cs are d({sup 133}Cs)=124(4)d{sub e} or d({sup 133}Cs)=0.76(2)x10{sup -18}C{sup SP}e cm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of thallium doping on the mobility of electrons in Bi{sub 2}Se{sub 3} and holes in Sb{sub 2}Te{sub 3}

The Shubnikov–de Haas effect and the Hall effect in n-Bi{sub 2–x}Tl{sub x}Se{sub 3} (x = 0, 0.01, 0.02, 0.04) and p-Sb{sub 2–x}Tl{sub x}Te{sub 3} (x = 0, 0.005, 0.015, 0.05) single crystals are studied. The carrier mobilities and their changes upon Tl doping are calculated by the Fourier spectra of oscillations. It is found shown that Tl doping decreases the electron concentration in n-Bi{sub 2–x}Tl{sub x}Se{sub 3} and increases the electron mobility. In p-Sb{sub 2–x}Tl{sub x}Te{sub 3}, both the hole concentration and mobility decrease upon Tl doping. The change in the crystal defect concentration, which leads to these effects, is discussed.

36 MATERIALS SCIENCE↗

Electrical Conductivity and Magnetic Susceptibility of Thallium 1223-Based Superconductor in the Fluctuation Range

The paper reports on the temperature dependencies of the electrical resistivity and the a.c. magnetic susceptibility of the Tl{sub 0.8}Bi{sub 0.3}Sr{sub 1.8}Ba{sub 0.2}Ca{sub 2}Cu{sub 3}O{sub x} bulk superconductor measured in the area of the transition from the metallic to the superconducting state. From the resistivity data, the onset temperature T{sub c,onset}= 121.6 K, the critical temperature T{sub c50%}= 118.8 K, the zero resistance critical temperature obtained using E= 10{sup − 6} V/cm criterion T{sub c0}= 117.9 K, and the width of superconducting transition ΔT= 1.6 K were derived. The thermal fluctuations were examined using the formulae for the conductance: Δσ=Kε{sup −λ}, and for the magnetic susceptibility: χ = Cε{sup −λ}, where Δσ=1/R(T)−1/R{sub R}(T), ε= | (T − T{sub c})/T{sub c}|, λ is the critical exponent, and K and C are constants. The critical exponents in the transition region from the normal to the superconducting state were determined and analyzed. The three-dimensional fluctuations were found to occur in the vicinity of the zero-resistance critical temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of lanthanide evaporation by complexation: Dysprosium tri-iodide mixed with indium iodide and thulium tri-iodide mixed with thallium iodide

The vapors in equilibrium with condensates of DyI{sub 3}, DyI{sub 3}/InI, TmI{sub 3}, and TmI{sub 3}/TlI were observed over the temperature range from 900 K to 1400 K using x-ray induced fluorescence. The total densities of each element (Dy, Tm, In, Tl, and I) in the vapor, summed over all atomic and molecular species, were determined. Dramatic enhancements in the total vapor densities of Dy and Tm were observed in the vapors over DyI{sub 3}/InI and TmI{sub 3}/TlI as compared to the vapors over pure DyI{sub 3} and pure TmI{sub 3}, respectively. An enhancement factor exceeding 10 was observed for Dy at T≈ 1020 K, decreasing to 0 at T≈ 1250 K. An enhancement factor exceeding 20 was observed for Tm at T≈ 1040 K, decreasing to 0 at T≈ 1300 K. Such enhancements are expected from the formation of the vapor-phase hetero-complexes DyInI{sub 4} and TmTlI{sub 4}. Numerical simulations of the thermo-chemical equilibrium suggest the importance of additional complexes in liquid phases. A description of the measurement technique is given. Improvements in the absolute calibration lead to an approximately 40% correction to previously reported preliminary results [J. J. Curry et al., Chem. Phys. Lett. 507, 52 (2011); Appl. Phys. Lett. 100, 083505 (2012)].

36 MATERIALS SCIENCE↗

Band gap and refractive index tunability in thallium based layered mixed crystals

Compositional variation of the band gap energy and refractive index of TlMeX{sub 2}-type (Me = Ga or In and X = S or Se) layered mixed crystals have been studied by the transmission and reflection measurements in the wavelength range of 400–1100 nm. The analysis of absorption data of TlGa{sub 1-x}In{sub x}Se{sub 2}, TlGa(S{sub 1−x}Se{sub x}){sub 2}, TlGa{sub 1−x}In{sub x}S{sub 2}, and TlIn(Se{sub 1−x}S{sub x}){sub 2} mixed crystals revealed the presence of both optical indirect and direct transitions. It was found that the energy band gaps of mixed crystals decrease at the replacing of gallium atoms by indium and of sulfur atoms by selenium ones. Through the similar replacing of atoms (smaller atoms by larger ones) in the studied mixed crystals, the refractive index shows the quite opposite behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reappraisal of the Electric Dipole Moment Enhancement Factor for Thallium

The electric dipole moment (EDM) enhancement factor of atomic Tl is of considerable interest as it has been used in determining the most accurate limit on the electron EDM to date. However, its value varies from -179 to -1041 in different approximations. In view of the large uncertainties associated with many of these calculations, we perform an accurate calculation employing the relativistic coupled-cluster theory and obtain -466, which in combination with the most accurate measurement of Tl EDM [Phys. Rev. Lett. 88, 071805 (2002)] yields a new limit for the electron EDM: |d{sub e}|<2.0x10{sup -27}e cm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗