Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Search for light pseudoscalar boson pairs produced from Higgs boson decays using the 4τ and 2μ2τ final states in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for a pair of light pseudoscalar bosons (a 1 ) produced in the decay of the 125 GeV Higgs boson is presented. The analysis examines decay modes where one a 1 decays into a pair of tau leptons and the other decays into either another pair of tau leptons or a pair of muons. The a1 boson mass probed in this study ranges from 4 to 15 GeV. The data sample was recorded by the CMS experiment in proton-proton collisions at a center-of-mass energy of 13 TeV and corresponds to an integrated luminosity of 138 fb −1 . No excess above standard model (SM) expectations is observed. The study combines the 4τ and 2μ2τ channels to set upper limits at 95% confidence level (CL) on the product of the Higgs boson production cross section and the branching fraction to the 4τ final state, relative to the Higgs boson production cross section predicted by the SM. In this interpretation, the a 1 boson is assumed to have Yukawa-like couplings to fermions, with coupling strengths proportional to the respective fermion masses. The observed (expected) upper limits range between 0.007 (0.011) and 0.079 (0.066) across the mass range considered. The results are also interpreted in the context of models with two Higgs doublets and an additional complex singlet field (2HD+S). The tightest constraints are obtained for the Type III 2HD+S model. In this case, assuming the Higgs boson production cross section equals the SM prediction, values of the branching ratio for the Higgs boson decay into a pair of a1 bosons exceeding 16% are excluded at 95% CL for a1 boson masses between 5 and 15 GeV and tan β > 2, with the exception of scenarios in which the a1 boson mixes with charm or bottom quark-antiquark bound states.

Higgs physics↗
DOE OSTI2025

Charged Higgs search in 2HDM

In this paper, we present a comprehensive study of the collider search limits on the charged Higgses in the four types of Two Higgs Double Models (2HDM). In addition to constraints from flavor physics measurements, we include both the LEP charged Higgs search channels, as well as the LHC search results on the light and heavy charged Higgses. We consider both the conventional charged Higgs search channels of H ± → τν, cs, cb, tb, and the latest search results on the exotic decay channels H ± → AW ± /HW ± . We find that H ± → AW ± /HW ± are complementary to the conventional fermionic channels for m H ± < m t . For heavy H ± , H ± → AW ± /HW ± extend the reach of tan β beyond that of H ± → tb in the Type-L 2HDM. We also present the combined reach of all the neutral and charged Higgs searches.

2HDM↗
DOE OSTI2021

Tau-jet signatures of vectorlike quark decays to heavy charged and neutral Higgs bosons

We study 4 b + 2 τ and 4 b + 1 τ signatures of heavy neutral and charged Higgs bosons originating from cascade decays of pair-produced new quarks. Decays of vectorlike quarks through heavy Higgses can easily dominate in the two Higgs doublet model of type-II, and the studied signatures are common to many possible decay chains. We design search strategies for these final states and discuss the mass ranges of heavy Higgs bosons and new quarks that can be explored at the Large Hadron Collider as functions of branching ratios in a model independent way. We further combine the results with a similar study focusing on decays which lead to a 6 b final state and interpret the sensitivity to charged and neutral Higgs bosons and vectorlike quarks in the type-II two Higgs doublet model. We find that the LHC reach for their masses extends to well above 2 TeV in the case of an SU(2) doublet quark and to at least 1.8 TeV for a bottom-like SU(2) singlet quark in the whole range of tan β between 1 and 50.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Leptonic cascade decays of a heavy Higgs boson through vectorlike leptons at the LHC

We demonstrate the potential of fully leptonic cascade decays of a heavy neutral Higgs boson through vectorlike leptons as a simultaneous probe for extended Higgs sectors and extra matter particles at the LHC. The processes we explore are unique in that their event topologies lead to di-boson-like leptonic final states with a lepton pair which does not reconstruct the mass of a gauge boson. By recasting existing $2\ell$ + $E^{\text{miss}}_{R}$ and $3/4\ell$ searches channels using run2 data from the LHC we obtain model independent bounds on the masses of heavy scalars and vectorlike leptons and use these results to explore future prospects at the HL-LHC. Our results can be directly applied to any kind of new physics scenarios sharing the final states and the event topology. For concreteness, we apply our results to a benchmark scenario: a two Higgs doublet model type-II augmented with vectorlike leptons. Remarkably, even with current data the sensitivity of our analysis shows a reach for masses of a heavy neutral Higgs and vectorlike leptons up to 2 TeV and 1.5 TeV, respectively. Even for low tan β ≳ 1, the analysis retains sensitivity to heavy Higgs masses slightly above 1 TeV. The future sensitivities at the HL-LHC extend the reach for heavy Higgses and new leptons to 2.7 TeV and 2 TeV, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Search for a heavy pseudoscalar Higgs boson decaying to a 125 GeV Higgs boson and a Z boson in final states with two tau and two light leptons in proton-proton collisions at $\sqrt{s} = 13$ TeV

A search for a heavy pseudoscalar Higgs boson, A, decaying to a 125 GeV Higgs boson h and a Z boson is presented. The h boson is identified via its decay to a pair of tau leptons, while the Z boson is identified via its decay to a pair of electrons or muons. The search targets the production of the A boson via the gluon-gluon fusion process, gg → A, and in association with bottom quarks, $b\overline{b}A$. The analysis uses a data sample corresponding to an integrated luminosity of 138 fb −1 collected with the CMS detector at the CERN LHC in proton-proton collisions at a centre-of-mass energy of $\sqrt{s} = 13$ TeV. Constraints are set on the product of the cross sections of the A production mechanisms and the A → Zh decay branching fraction. The observed (expected) upper limit at 95% confidence level ranges from 0.049 (0.060) pb to 1.02 (0.79) pb for the gg → A process and from 0.053 (0.059) pb to 0.79 (0.61) pb for the $b\overline{b}A$ process in the probed range of the A boson mass, mA, from 225 GeV to 1 TeV. The results of the search are used to constrain parameters within the $M^{125}_{h,EFT}$ benchmark scenario of the minimal supersymmetric extension of the standard model. Values of tan β below 2.2 are excluded in this scenario at 95% confidence level for all mA values in the range from 225 to 350 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Search for direct production of GeV-scale resonances decaying to a pair of muons in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

A search for direct production of low-mass dimuon resonances is performed using $ \sqrt{s} $ = 13 TeV proton-proton collision data collected by the CMS experiment during the 2017–2018 operation of the CERN LHC with an integrated luminosity of 96.6 fb$^{−1}$. The search exploits a dedicated high-rate trigger stream that records events with two muons with transverse momenta as low as 3 GeV but does not include the full event information. The search is performed by looking for narrow peaks in the dimuon mass spectrum in the ranges of 1.1–2.6 GeV and 4.2–7.9 GeV. No significant excess of events above the expectation from the standard model background is observed. Model-independent limits on production rates of dimuon resonances within the experimental fiducial acceptance are set. Competitive or world’s best limits are set at 90% confidence level for a minimal dark photon model and for a scenario with two Higgs doublets and an extra complex scalar singlet (2HDM+S). Values of the squared kinetic mixing coefficient ε$^{2}$ in the dark photon model above 10$^{−6}$ are excluded over most of the mass range of the search. In the 2HDM+S, values of the mixing angle sin(θ$_{H}$) above 0.08 are excluded over most of the mass range of the search with a fixed ratio of the Higgs doublets vacuum expectation tan β = 0.5.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

High performance high-power textured Mn/Cu-doped PIN-PMN-PT ceramics

Piezoelectric ceramics with combinatory soft and hard characteristics are highly desired for high-power applications. However, it remains grand challenge to achieve simultaneous presence of hard (e.g. high coercive field, E c ; high mechanical quality factor, Q m ) and soft (e.g. high piezoelectric constant, d; high electromechanical coupling factor, k) piezoelectric properties in piezoelectric ceramics since the mechanism controlling the hard behavior (pinned domain walls) will significantly reduce the soft behavior. Here, we address this grand challenge and demonstrate <001> textured MnO 2 and CuO co-doped Pb(In 1/2 Nb 1/2 )O 3- Pb(Mg 1/3 Nb 2/3 )O 3- PbTiO 3 (PIN-PMN-PT) ceramics exhibiting ultrahigh combined soft and hard piezoelectric properties (d 33 = 713 pC N –1 , k 31 = 0.52, Q m ≈950, E c = 9.6 kV cm –1 , tan δ = 0.45%). The outstanding electromechanical properties are explained by considering composition/phase selection, crystallographic anisotropy and defect engineering. Phase-field model in conjunction with high resolution electron microscopy and diffraction techniques is utilized to delineate the contributions arising from intrinsic piezoelectric response, domain dynamics, and local structural heterogeneity. Furthermore, these results will have significant impact in the development of high-power transducers and actuators.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Renewable diesel and bio-aromatics production from waste cooking oil using ethanol as a hydrogen donor in deoxygenation reaction

Biofuels offer a promising solution in the fight against climate change. With a global increase in waste cooking oil, this research investigated the production of bio-hydrogenated diesel (BHD) from waste cooking oil, using ethanol as a hydrogen donor in the deoxygenation process. A hydrolyzed waste cooking oil model compound served as the feedstock, and the deoxygenation was performed at 300–400 °C. The catalysts used in the experiments were 2.6 wt% Ni and 7.8 wt% Mo (2.6Ni-7.8Mo) and 10 wt% Ni and 5 wt% Mo (10Ni-5Mo) on γ-Al 2 O 3 . The results showed that ethanol is an effective hydrogen donor for biofuel production without the need for external hydrogen at an elevated pressure. The increasing temperature enhanced the free fatty acid (FFA) conversion and n-alkane selectivity in the oil product, with the highest FFA conversion and alkane selectivity of 100 % and 46 %, respectively, observed at 400 °C for the sulfided 10Ni-5Mo catalyst. On the other hand, 2.6Ni-7.8Mo offers 100 % FFA conversion with a lower n-alkane selectivity of 35 % at identical temperatures. The total acid number (TAN) of the oil products decreased from 174.03 mg KOH/g of feedstock to 9.43 and 8.67 mg KOH/g with the sulfided 2.6Ni-7.8Mo and 10Ni-5Mo catalysts, respectively. Both the catalysts achieved similar heating values (~43 MJ/kg) at 400 °C. This is a significant improvement to the HHV of the feedstock, which was 36.02 MJ/kg. Additionally, aromatic compounds, mainly BTXE (benzene, toluene, xylene, and ethylbenzene), were also produced. Compared to glycerol as a hydrogen donor, ethanol more effectively increased n-alkane selectivity due to its higher effective hydrogen-to-carbon ratio (H/C eff ). Conversely, glycerol was more advantageous for achieving greater selectivity towards BTXE compounds due to its lower H/C eff , which potentially leads to coke formation. Since aromatic compounds are intermediates in coke production, glycerol provides higher aromatic selectivity than ethanol. Finally, this study presents an alternative pathway for producing diesel fuel from waste cooking oil using ethanol as a hydrogen donor.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Co-Transport of PFAS and Cr(VI) in porous media

PFAS and Cr are present at some sites as co-contaminants. Here, the objective of this research was to investigate the co-transport behavior of per- and polyfluoroalkyl substances (PFAS) and hexavalent chromium (Cr(VI)) in porous media. Miscible-displacement experiments were conducted using two soils and an aquifer sediment with different geochemical properties. Perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) were employed as model PFAS. The retardation of PFOS was decreased in the presence of Cr(VI). Conversely, the transport and retardation of PFOA was not affected by the presence of Cr(VI). The reduction of PFOS retardation caused by Cr(VI) is likely due to sorption competition for both organic-carbon and inorganic (metal-oxides and clay minerals) domains. The relative contributions of the three soil constituents to PFOS sorption and the potential for competition between PFOS and Cr(VI) is a function of the geochemical composition of the porous media (i.e., organic carbon, metal-oxides and clay minerals). The PFAS had minimal impact on the retention and transport of Cr(VI). To our knowledge, the results presented herein represent the first reported data for PFOS and Cr(VI) co-transport in porous media. The results of this study indicate that the presence of Cr(VI) has the potential to increase the migration potential of PFOS in soil and groundwater, which should be considered when characterizing electroplating facilities, leather tanning facilities, and other co-contaminated sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Comparison of the Chemical Composition of Liquids from the Pyrolysis and Hydrothermal Liquefaction of Lignocellulosic Materials

Major differences in thermal stability and hydrotreatment behavior of HTL and pyrolysis oils have been reported in the literature. However, little is known about the variations in the chemical composition of these oils that could explain such differences. Two commercial wood pyrolysis oils (Pyrovac and BTG), and their water-soluble (WS) and water-insoluble fractions (WIS) were analyzed and compared with the aqueous (WS WD-57 ) and oily (WIS WS-57 ) fractions obtained from hydrothermal liquefaction (HTL) of Douglas-fir. The samples were characterized by GC/MS, Karl Fischer titration, carbonyl content, total acid number, elemental composition, calorific value, proximate analysis, Fourier Transform Infrared Spectroscopy (FTIR), Folin-Ciocalteu (FC), and UV fluorescence. All the fractions were also analyzed by Fourier Transform Ion Cyclotron Resonance Mass Spectroscopy (FT-ICR-MS) and by Electrospray Ionization (EI). The most prevalent class of compounds in the water insoluble phases were phenols derived from lignin. Water-soluble phases contain mostly the oxygenated compounds derived from cellulose and hemicellulose and were richer in carbonyl functional groups. The water content of the resulting aqueous phases were between: 65 (WS BTG ) and 96 (WS Pyrovac ) wt. %. The bio-oil from BTG has higher water content and lower HHV, compared to Pyrovac oil. The GC/MS results of BTG oil show the presence of a more prominent acetic acid peak and higher TAN number than the Pyrovac oil. The GC/MS of Pyrovac oil showed more obvious mono-phenol peaks. The quantification of this family by Folin-Ciocalteu method confirmed higher content of monophenolic compounds compared with the BTG oil. The lower thermal stability of pyrolysis oils compared with HTL biocrudes can be partially explained by the fact that pyrolysis oils (BTG and Pyrovac) contain carbohydrates while HTL biocrude (WIS WD-57 ) doesn’t. Thus, we decided to further investigate the chemical differences between the phenolic rich fractions insoluble in water and the holocellulose derived compounds soluble in water. Even after water extraction, the acid content of the water insoluble fraction from BTG (WISBTG) was higher than the acid content of the water insoluble fraction obtained by HTL (WISWSD-57). Likewise, the acid content of the aqueous phases derived from pyrolysis oils (WS Pyrovac , WS BTG ) was also higher than for the aqueous phase obtained by HTL (WSWSD-57). This result is in part due to the use of bases in the HTL process that neutralizes the acid formed in that process. Moreover, the starting feedstock may also influence the differences between the oils. Although, the UV-Fluorescence spectra, ICR-MS and the EI analyses showed some minor differences in the molecular weight and chemical make-up of the oligomers soluble and insoluble in water from pyrolysis and HTL; the differences observed were not large enough to justify the differences in behavior between these oils reported in the literature. Our results suggest that the differences observed between HTL biocrudes and pyrolysis oils are likely partially due to the presence of holocellulose derived products in the pyrolysis oils and higher acid contents.

09 BIOMASS FUELS↗
DOE OSTI2022

Creating Functional Oxynitride–Silicon Interfaces and SrNbO 2 N Thin Films for Photoelectrochemical Applications

Photoelectrochemical performance dependence upon absorption length, carrier diffusion length, and surface area of an oxynitride photoabsorber is investigated. How best to fabricate optical-quality thin films of bandgap-tunable oxynitrides is also discussed. We targeted the stoichiometric compound SrNbO 2 N as an optimal wide-bandgap photoabsorber (1.9 eV) for use with silicon (1.1 eV) in a tandem structure photoelectrochemical cell. Preparation of perovskite oxynitrides at high-temperature as isolated powders is often straightforward, but it is difficult to integrate them as thin films in tandem junction devices with low-temperature materials. Here we develop the first method to prepare optical-quality SrNbO 2 N thin-films of tunable thickness and roughness on single-crystal silicon substrate. This achievement required an interfacial layer of ultra-thin TaN to be used as a barrier to reduce the inter-diffusion of silicon and oxygen during oxynitride syn-thesis. We produced a variety of SrNbO 2 N film thicknesses (20-440 nm) on n + -Si(100) surfaces. Roughness factor (0.14-21) scaled with thickness. The intrinsic photoelectrochemical activity of these devices was evaluated using a low-barrier sacrificial electron donor. Photocurrent density and photovoltage revealed a significant (and non-linear) dependence on film thickness and roughness. Furthermore, absorption length, carrier diffusion length, and surface area were each found to play key roles. Balancing these is required for optimally performing devices.

08 HYDROGEN↗
DOE OSTI2024

Electrode Elastic Modulus as the Dominant Factor in the Capping Effect in Ferroelectric Hafnium Zirconium Oxide Thin Films

The discovery of ferroelectricity in hafnia based thin films has catalyzed significant research focused on understanding the ferroelectric property origins and means to increase stability of the ferroelectric phase. Prior studies have revealed that biaxial tensile stress via an electrode “capping effect” is a suspected ferroelectric phase stabilization mechanism. This effect is commonly reported to stem from a coefficient of thermal expansion (CTE) incongruency between the hafnia and top electrode. Despite reported correlations between ferroelectric phase fraction and electrode CTE, the thick silicon substrate dominates the mechanics and CTE-related stresses, negating any dominant contribution from an electrode CTE mismatch toward the capping effect. In this work, these discrepancies are reconciled, and the origin of these differences deriving from electrode elastic modulus, not CTE, is demonstrated. Pt/M/TaN/Hf 0.5 Zr 0.5 O 2 /TaN/Si devices, where M is platinum, TaN, iridium, tungsten, and ruthenium, were fabricated. Sin 2 (ψ)-based X-ray diffraction measurements of biaxial stress in the HZO layer reveal a strong correlation between biaxial stress, remanent polarization, and electrode elastic modulus. Conversely, a low correlation exists between the electrode CTE, HZO biaxial stress, and remanent polarization. A higher elastic modulus enhances the resistance to electrode elastic deformation, which intensifies the capping effect during crystallization, and culminates in the tandem restriction of out-of-plane hafnia volume expansion and preferential orientation of the polar c-axis normal to the plane. These behaviors concomitantly increase the ferroelectric phase stability and polarization magnitude. This work provides electrode material selection guidelines toward the development of high-performing ferroelectric hafnia into microelectronic devices, such as nonvolatile memories.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Formulation and Performance Evaluation of Epoxy Sealant Systems for Double-Shell Tank Bottom Refurbishment

The performance of epoxy sealants used in the refurbishment of double-shell tank (DST) systems requires balancing processability, thermomechanical stability, and adhesion to cementitious substrates. This study incorporates Heloxy 8 as a reactive diluent into Westlake 862 epoxy to tailor workability and cured-state properties. Rheological time-sweep analysis demonstrates that increasing the diluent content significantly reduces complex viscosity and extends workability, thereby improving pumpability and flow for large-area applications. However, the targeted 2-hour processing window is not fully achieved. Differential scanning calorimetry (DSC) confirms that all formulations cure at room temperature to glass transition temperatures ( T g ) at least 20 °C above the maximum DST operating temperature (27 °C), thereby ensuring service in the glassy regime. Dynamic mechanical analysis (DMA) reveals formulation-dependent reductions in tan delta and increases in storage modulus, indicating increasingly elastic and mechanically stable networks with diluent incorporation. Pull-off adhesion testing shows that modified formulations (70–90% Westlake epoxy) exhibit significantly higher adhesion strengths than the unmodified system. Grout cohesive failure indicates that interfacial bonding exceeds substrate strength. Collectively, these results demonstrate that controlled reactive diluent incorporation enables optimization of processing behavior, interfacial adhesion, and thermomechanical performance, supporting the suitability of the modified epoxy systems as durable sealant layers for cementitious barrier applications in hazardous waste containment infrastructure.

Differential scanning calorimetry↗
DOE OSTI2021

Sodium dodecyl sulfate modulates the structure and rheological properties of Pluronic F108–poly(acrylic acid) coacervates)

Micelles formed within coacervate phases can impart functional properties, but it is unclear if this micellization provides mechanical reinforcement of the coacervate whereby the micelles act as high functionality crosslinkers. Here, we examine how sodium dodecyl sulfate (SDS) influences the structure and properties of Pluronic F108–polyacrylic acid (PAA) coacervates as SDS is known to decrease the aggregation number of Pluronic micelles. Increasing the SDS concentration leads to larger water content in the coacervate and an increase in the relative concentration of PAA to the other solids. Rheological characterization with small angle oscillatory shear (SAOS) demonstrates that these coacervates are viscoelastic liquids with the moduli decreasing with the addition of the SDS. The loss factor (tan δ) initially increases linearly with the addition of SDS, but a step function increase in the loss factor occurs near the reported CMC of SDS. However, this change in rheological properties does not appear to be correlated with any large scale structural differences in the coacervate as determined by small angle X-ray scattering (SAXS) with no signature of Pluronic micelles in the coacervate when SDS concentration is >4 mM during formation of the coacervate, which is less than that observed (6 mM SDS) in initial Pluronic F108 solution despite the higher polymer concentration in the coacervate. Finally, these results suggest that the mechanical properties of polyelectrolyte-non-ionic surfactant coacervates are driven by the efficicacy of binding between the complexing species driving the coacervate, which can be disrupted by competitive binding of the SDS to the Pluronic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Valorization of consolidated bioprocessing residues for bioplastics

This study demonstrates an organic solvent-free processing strategy to valorize consolidated bioprocessing (CBP) residues, from switchgrass and poplar biomass, into functional poly(butylene succinate) (PBS)-based biocomposites using high-shear homogenization (HSH). HSH transformed the switchgrass and poplar CBP residues (CBP-R) into fine, uniformly distributed particles and microfibers. The composites of PBS with homogenized switchgrass residues (H-CBP-R-SG) or homogenized poplar residues (H-CBP-R-P) at a 70/30 weight ratio exhibited improved processability and mechanical integrity, with the Young's modulus for the PBS/H-CBP-R-SG and PBS/H-CBP-R-P nearly doubling to 0.66 ± 0.07 GPa and 0.65 ± 0.04 GPa, respectively, compared to neat PBS (0.36 ± 0.02 GPa). Dynamic Mechanical Analysis (DMA) reveals a significant suppression of the tan δ peak magnitude, indicating that HSH-mediated physical activation facilitates stress transfer in composites typical of covalent chemical grafting systems. While the transition to a stiffness-dominated profile reduces ductility, the resulting composites exhibit the dimensional stability and resistance to thermal warping required for high-fidelity FDM 3D printing and injection molding. Beyond material performance, comprehensive techno-economic analysis (TEA) and life cycle assessment (LCA) confirmed that diverting CBP residues into composite products can improve the economic viability of the biorefinery without substantially increasing biorefinery global warming potential (GWP). At a 30 wt% blend ratio, incorporating residuals into PBS yielded a minimum selling price for the composite of $\$4.07$ per kg compared to the conventional bioplastic price of $\$5.00$ per kg. This approach aligns with circular bioeconomy principles by converting waste streams into value-added products. Furthermore, this innovative strategy addresses key challenges in bioplastic development, including cost, compatibility, and performance, while simultaneously advancing waste minimization strategies for sustainable manufacturing systems.

09 BIOMASS FUELS↗
DOE OSTI2021

Chiral propulsion: The method of effective boundary conditions

We propose to apply an “effective boundary condition” method to the problem of chiral propulsion. For the case of a rotating helix moving through a fluid at a low Reynolds number, the method amounts to replacing the original helix (in the limit of small pitch) by a cylinder, but with a special kind of partial slip boundary conditions replacing the non-slip boundary conditions on the original helix. These boundary conditions are constructed to reproduce far-field velocities of the original problem and are defined by a few parameters (slipping lengths) that can be extracted from a problem in planar rather than cylindrical geometry. We derive the chiral propulsion coefficients for spirals, helicoids, helically modulated cylinders and some of their generalizations using the introduced method. In the case of spirals, we compare our results with the ones derived by Lighthill and find a very good agreement. Here, the proposed method is general and can be applied to any helical shape in the limit of a small pitch. Furthermore, we have established that for a broad class of helical surfaces the dependence of the chiral propulsion on the helical angle θ is universal, x ~ cos θ sin 2θ with the maximal propulsion achieved at the universal angle θ m = tan –1 (1/√2) ≈ 35.26°.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Implementation of an impurity diagnostic suite on the Pegasus-III experiment

A suite of diagnostics used to assess impurity content and dynamics has been updated, upgraded, and installed on the Pegasus-III Experiment. Typical plasma parameters during local helicity injection start-up are τ shot ~10 ms, n e ~ 1 × 10 19 m –3 , and T e ~ 50 eV. The deployed diagnostics are compatible with this modest temperature and density regime and provide species identification, source localization, and estimation of radiation losses. Impurity species are determined by recording time-evolving, single line-of-sight spectra at 1.25 kfps using a SPRED (Survey, Poor Resolution, Extended Domain) vacuum ultraviolet spectrometer. SPRED is equipped with 450 g/mm grating, giving a spectral resolution of 0.33 nm and a spectral range from ~10 to 110 nm, useful to identify light impurity species in this temperature and density range. An absolutely calibrated spectrometer that collects light from the plasma at R tan = 15.9 cm and Δt ≥ 2 ms is used as a visible survey spectrometer and for continuum measurements. The radiated power from the plasma is estimated with a photodiode-based diagnostic. Two 16-channel absolute extreme ultraviolet diode arrays are placed behind pinhole apertures, resulting in 32 lines of sight at Z = 0, with a spatial resolution of 2–3 cm and a time response of 60 kHz. A photometrically calibrated collinear D α /near infrared filtered photodiode-based system measures the D α emission and around 1040 nm. All these instruments have been designed to suppress electromagnetic interference from megawatt-class switching power supplies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

MSSM at future Higgs factories *

Abstract In this work, we study the implications of Higgs precision measurements at future Higgs factories for the MSSM parameter space, focusing on the dominant stop sector contributions. We perform a multi-variable fit to both the signal strength for various Higgs decay channels at Higgs factories and the Higgs mass. The χ 2 fit results show sensitivity to m A , tan β , stop mass parameter m SUSY , and the stop left-right mixing parameter Xt. We also study the impact of the Higgs mass prediction on the MSSM and compare the sensitivities of different Higgs factories.

Physics↗