Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sustained Oscillations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Active Control of Supersonic Impinging Jets

Experimental studies of supersonic impinging jet flows suggest that they are greatly influenced by the flow-acoustic interactions through a feedback mechanism. The self-sustained oscillations of the jet column observed in these flows result in high velocities in the ambient medium induced by the large-scale coherent vortical structures in the jet shear layers. As a consequence, the suck down force on the surface from which the jet is issuing can reach as high as 60% of the primary jet thrust. In addition, the overall sound pressure levels (OASPL) increase significantly relative to a free jet. To alleviate these undesirable flow and acoustic characteristics, a novel control technique using supersonic microjets is demonstrated. Sixteen supersonic microjets are placed around the circumference of the main jet at the nozzle exit to disrupt the feedback mechanism. As a result, significant lift loss recovery (approximately 50%) and reduced near field OASPL (approximately 7 dB) are observed.

Krothapalli, A.↗

Numerical simulation of self-sustained and forced oscillations in jet shear layers

Excitation of axisymmetric jet shear layers has been investigated by solving the time-dependent compressible Navier-Stokes equations. MacCormack's explicit finite difference scheme is used in performing the computations on a CRAY X-MP computer. This work examines the influence of various means of excitation of the shear layer, to produce large scale vortex structures in such a manner that the mixing between two flows will be enhanced or diminished. While successful pressure excitation has been achieved in previous studies only limited success with temperature excitation at the inflow boundary has been accomplished. The current study focuses on the use of temperature excitation through the boundary layer immediately inside the jet lip. In order to achieve the required resolution significant grid refinement is necessary. The results of the computation with and without temperature excitation are analyzed and compared with results obtained using pressure excitation. The influence of amplitude and frequency on specific flow characteristics are also examined. The excitation frequency for both the temperature and pressure corresponds to a Strouhal number of .45 and the inflow jet Mach number is approximately .3.

Scott, J. N.↗

Unsteady, Transonic Flow Around Delta Wings Undergoing Coupled and Natural Modes Response: A Multidisciplinary Problem

The unsteady, three-dimensional Navier-Stokes equations coupled with the Euler equations of rigid-body dynamics are sequentially solved to simulate and analyze the aerodynamic response of a high angle of attack delta wing undergoing oscillatory motion. The governing equations of fluid flow and dynamics of the multidisciplinary problem are solved using a time-accurate solution of the laminar, unsteady, compressible, full Navier- Stokes equations with the implicit, upwind, Roe flux-difference splitting, finite-volume scheme and a four-stage Runge-Kutta scheme, respectively. The primary model under consideration consists of a 65 deg swept, sharp-edged, cropped delta wing of zero thickness at 20 deg angle of attack. In a freestream of Mach 0.85 and Reynolds number of 3.23 x 10(exp 6), the flow over the upper surface of the wing develops a complex shock system which interacts with the leading-edge primary vortices producing vortex breakdown. The effect of the oscillatory motion of the wing on the vortex breakdown and overall aerodynamic response is detailed to provide insight to the complicated physics associated with unsteady flows and the phenomenon of wing rock. Forced sinusoidal single and coupled mode rolling and pitching motion is presented for the wing in a transonic freestream. The Reynolds number, frequency of oscillation, and the phase angle are varied. Comparison between the single and coupled mode forced rolling and pitching oscillation cases illustrate the effects of coupling the motion. This investigation shows that even when coupled, forced rolling oscillation at a reduced frequency of 2(pi) eliminates the vortex breakdown which results in an increase in lift. The coupling effect for in phase forced oscillations show that the lift coefficient of the pitching-alone case and the rolling-moment coefficient of the rolling-alone case dominate the resulting response. However, with a phase lead in the pitching motion, the coupled motion results in a non-periodic response of the rolling moment. The second class of problems involve releasing the wing in roll to respond to the flowfield. Two models of sharp-edged delta wings, the previous 65 deg swept model and an 80 deg swept, sharp-edged delta wing, are used to observe the aerodynamic response of a wing free to roll in a transonic and subsonic freestream, respectively. These cases demonstrate damped oscillations, self-sustained limit cycle oscillations, and divergent rolling oscillations. Ultimately, an active control model using a mass injection system was applied on the surface of the wing to suppress the self-sustained limit cycle oscillation known as wing rock. Comparisons with experimental investigations complete this study, validating the analysis and illustrating the complex details afforded by computational investigations.

Menzies, Margaret Anne↗

Impact of the Exciter and Governor Parameters on Forced Oscillations

In recent years, the frequency of forced oscillation events due to control system malfunctions or improper parameter settings has increased. Tuning the parameters of exciters and governor models is crucial for maintaining power system stability. Traditional simulation studies typically involve small transient disturbances or step changes to find optimal parameter sets, but existing optimization algorithms often fall short in fine-tuning for forced oscillations. Identifying the sensitive parameters within these control models is essential for ensuring stability during large, sustained disturbances. This study focuses on identifying these critical exciter and governor model parameters by analyzing their influence on sustained forced oscillations. Using Kundur’s two-area system, we analyze common exciter models such as SCRX, ESST1A, and AC7B, along with governor models like GAST, HYGOV, and GGOV1, utilizing PSS®E software version 34. Sustained forced oscillations are injected at generator-1 of area-1, with individual parameter changes dynamically simulated. By considering a local oscillation frequency of 1.4 Hz and an inter-area oscillation mode of 0.25 Hz, we analyze the impact of each parameter change on the magnitude and frequency of forced oscillations as well as on active and reactive power outputs. This novel approach highlights the most influential parameters of each tested model—such as exciter, governor, and turbine gains, as well as time constant parameters—on the impact of forced oscillations. Based on our findings, the sensitive parameters of each tested model are ranked. These would provide valuable insights for industry operators to fine-tune control settings during oscillation events, ultimately enhancing system stability.

42 ENGINEERING↗

Measurement Adequacy for Monitoring Data Center Oscillations

Artificial intelligence (AI) training data centers with periodic load profiles can induce sustained grid oscillations across a wide frequency range, making accurate monitoring essential for reliable power system operation. This report evaluates the adequacy of existing measurement systems for monitoring such oscillations, focusing on phasor measurement units (PMUs) and point-on-wave (POW) measurement systems. The analysis shows that while PMUs are highly effective for monitoring low-frequency electromechanical oscillations, they have inherent limitations in accurately representing higher-frequency oscillations due to constraints imposed by reporting rates and the bandwidth of phasor estimation filters. Even when configured with higher reporting rates, the filtering inherent in the phasor estimation process can significantly attenuate oscillation magnitudes, potentially leading to underestimation of oscillatory behavior. This has important implications for compliance and performance monitoring of large loads. To address the limitations associated with PMU-based monitoring, the report examines the use of high-resolution POW measurements, which can capture oscillations across a broader frequency range. However, continuous POW monitoring introduces practical challenges related to large data volumes, communication bandwidth, and real-time data processing. For this reason, the report also discusses emerging approaches that use POW measurements as a complementary capability alongside PMUs to improve observability of oscillations from large data center loads.

47 OTHER INSTRUMENTATION↗

The effect of flow oscillations on cavity drag

An experimental investigation of flow over an axisymmetric cavity shows that self-sustained, periodic oscillations of the cavity shear layer are associated with low cavity drag. In this low-drag mode the flow regulates itself to fix the mean-shear-layer stagnation point at the downstream corner. Above a critical value of the cavity width-to-depth ratio there is an abrupt and large increase of drag due to the onset of the 'wake mode' of instability. It is also shown by measurement of the momentum balance how the drag of the cavity is related to the state of the shear layer, as defined by the mean momentum transport and the Reynolds stress, and how these are related to the amplifying oscillations in the shear layer. The cavity shear layer is found to be different, in several respects, from a free shear layer.

Gharib, M.↗

A Methodology to Evaluate the Grid Reliability Impact of Oscillations Induced by Large Loads

The rapid growth of hyperscale AI data centers is bringing renewed attention to the reliability risk that sustained forced oscillations pose to bulk power systems, with cyclic computational workloads emerging as a new forcing source. Unlike the broadband, stochastic disturbances from traditional industrial loads such as arc furnaces, AI training and inference facilities can inject large active power swings concentrated at specific frequencies over extended durations - characteristics that existing grid planning practices do not account for. While the North American Electric Reliability Corporation (NERC) has recognized this gap and called for system-level studies of large load interconnections, no standardized methodology exists to screen, simulate, and quantify these risks at the planning stage. This report presents the Risk Assessment Tool for Large Load-induced Events (RATLLE), a Python-based, publicly available script suite developed at the Pacific Northwest National Laboratory to evaluate bulk power system reliability risks from data center-induced oscillations. RATLLE implements a three-module workflow: a screening module that identifies vulnerable interconnection locations and excitable system modes; a simulation module that models cyclic data center load behavior using a commercial positive sequence simulation platform; and an analysis module that computes risk metrics and generates interactive visualization dashboards. The risk metrics, formulated around simulation observables, map oscillation impacts to a three-stage severity scale spanning latent equipment fatigue through imminent cascading failure. The methodology is demonstrated on two Western Electricity Coordinating Council (WECC) system models: a publicly available 240-bus reduced representation and a detailed 2031 Heavy Winter planning case. Case studies illustrate that even modest 50 MW forced oscillations at resonant frequencies can produce wide-area power swings, N-1 security constraint violations, and cascading generator trips through protection actions - outcomes that would not occur under normal operating conditions without oscillations present. The results underscore the need for standardized oscillation impact assessment in large load interconnection studies and provide a reproducible, extensible framework for utilities to adopt or customize within their existing planning workflows.

Biswas, Shuchismita↗

Enhancing actuation control in monolithic liquid crystal elastomer films with dual heat and light responsiveness

This study presents a dual heat and light-responsive monolithic liquid crystal elastomers (LCEs) film designed to enhance actuation control. The LCE films were capable of various motion types, including curvature reversal, oscillation, and sustainable flipping. By incorporating an azobenzene compound, the films exhibited additional functionalities such as enhanced curvature reversal, accelerated oscillation, and the ability to lock continuous flipping motion upon light stimulation. Furthermore, by adjusting the aspect ratio (AR) of a single film, different thermal motion states were realized, demonstrating the flexibility of this approach. Observations using an NIR camera confirmed temperature fluctuations corresponding to thermal exchange, and the influence of UV light on motion regulation was quantitatively analyzed. In conclusion, the ability to regulate motion through dual stimuli paves the way for improved dynamic motion control and thermal management in advanced robotic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dashpot Damps Oscillations In Check Valve

Operation of check valve improved by redesigning poppet and adding two new components: dashpot and dashpot ring between dashpot and poppet. Modifications eliminate self-sustaining poppet oscillations that cause premature wear and jamming of poppet mechanism.

Morris, Brian G.↗

Magnetometer Based on Optoelectronic Microwave Oscillator

proposed instrument, intended mainly for use as a magnetometer, would include an optoelectronic oscillator (OEO) stabilized by an atomic cell that could play the role of a magnetically tunable microwave filter. The microwave frequency would vary with the magnetic field in the cell, thereby providing an indication of the magnetic field. The proposed magnetometer would offer a combination of high accuracy and high sensitivity, characterized by flux densities of less than a picotesla. In comparison with prior magnetometers, the proposed magnetometer could, in principle, be constructed as a compact, lightweight instrument: It could fit into a package of about 10 by 10 by 10 cm and would have a mass <0.5 kg. As described in several prior NASA Tech Briefs articles, an OEO is a hybrid of photonic and electronic components that generates highly spectrally pure microwave radiation, and optical radiation modulated by the microwave radiation, through direct conversion between laser light and microwave radiation in an optoelectronic feedback loop. As used here, "atomic cell" signifies a cell containing a vapor, the constituent atoms of which can be made to undergo transitions between quantum states, denoted hyperfine levels, when excited by light in a suitable wavelength range. The laser light must be in this range. The energy difference between the hyperfine levels defines the microwave frequency. In the proposed instrument (see figure), light from a laser would be introduced into an electro-optical modulator (EOM). Amplitude-modulated light from the exit port of the EOM would pass through a fiber-optic splitter having two output branches. The light in one branch would be sent through an atomic cell to a photodiode. The light in the other branch would constitute the microwave-modulated optical output. Part of the light leaving the atomic cell could also be used to stabilize the laser at a frequency in the vicinity of the desired hyperfine or other quantum transition. The microwave signal from the output of the photodiode would be amplified (if necessary, as explained below) and fed back into the EOM. This system would oscillate if the amplification in the closed loop exceeded the linear absorption of the loop. The microwave amplifier may be unnecessary to sustain stable oscillations, depending on the power of the laser radiation at the photodetector and on particular features of the modulator and optical delay line.

Maleki, Lute↗

Effect of flow oscillations on cavity drag and a technique for their control

Experiments to relate the state of the shear layer to cavity drag have been performed in a water channel using a 4" axisymmetric cavity model. Detailed flow measurements in various cavity flow oscillation phases, amplitude amplification along the flow direction, distribution of shear stress, and other momentum flux obtained by laser Doppler velocimeter are presented. Measurements show exponential dependence of cavity drag on the length of the cavity. A jump in the cavity drag coefficient is observed as the cavity flow shows a bluff body wake type behavior. Natural and forced oscillations are introduced by a sinusoidally heated thin-film strip which excites the Tollmein-Schlichting waves in the boundary layer upstream of the gap. For a large gap, self-sustained periodic oscillations are observed, while for smaller gaps, which do not oscillate naturally, periodical oscillations can be obtained by external forcing through the strip heater. The drag of the cavity can be increased by one order of magnitude in the non-oscillating case through external forcing. Also, it is possible to completely eliminate mode switching by external forcing. For the first time, it is demonstrated that amplitude of cavity flow Kelvin-Helmholtz wave is dampened or cancelled by introduction of external perturbation of natural flow frequency but different phase.

Gharib, M.↗

Self-oscillating synchronematic colloids

Self-oscillators that sustain periodic dynamics under constant input are ubiquitous in natural and engineered systems, where their interactions enable spatiotemporal coordination among many individual units. New forms of organization can emerge when these self-oscillating units are free to move and rotate, coupling their spatial arrangement and alignment with their oscillation frequencies and phases. Here, we report experiments and simulations on populations of Quincke colloids that behave as self-oscillating units with position, orientation, frequency, and phase. Depending on the initial distribution, these active oscillators spontaneously organize into distinct collective states characterized by temporal synchronization and directional alignment, which we term synchronematic order. In fluid-like clusters, this order is short-ranged and decays over a length scale set by the competition between hydrodynamic interactions and athermal noise. In crystalline clusters, these interactions drive flobal synchronization and circular alignment-synchronematic crystals-whose collective frequency increases with cluster size due to non-reciprocal interactions. Our results establish self-oscillating colloids as a model system for active oscillatory matter and reveal fundamental principles by which synchronization, alignment, and structure co-emerge, offering new pathways for designing adaptive, frequency-tunable materials.

colloids↗

Non-Stationary Power System Forced Oscillation Analysis using Synchrosqueezing Transform

Non-stationary forced oscillations (FOs) have been observed in power system operations. However, most detection methods assume that the frequency of FOs is stationary. In this paper, we present a methodology for the analysis of nonstationary FOs. Firstly, Fourier synchrosqueezing transform (FSST) is used to provide a concentrated time-frequency representation of the signals that allows identification and retrieval of non-stationary signal components. To continue, the Dissipating Energy Flow (DEF) method is applied to the extracted components to locate the source of forced oscillations. The methodology is tested using simulated as well as real PMU data. In conclusion, the results show that the proposed FSST-based signal decomposition provides a systematic framework for the application of DEF Method to non-stationary FOs.

42 ENGINEERING↗

Understanding JET-C quiescent phases with edge harmonic magnetohydrodynamic activity and comparison with behaviour under ITER-like wall conditioning

An analysis of edge localised mode-free (quiescent) H-mode discharges exhibiting edge harmonic magnetoydrodynamic activity in the JET-carbon wall machine is presented. It is observed that the otherwise quiescent pulses with multiple-n harmonic oscillations are sustained until a threshold in pedestal electron density and collisionality is crossed. The macroscopic pedestal parameters associated with the quiescent phase are compared with those of a database of JET-ELMy discharges with both carbon and ITER-like wall (ILW). This comparison provides the identification of the existence regions in the relevant pedestal and global plasma parameters for edge harmonic oscillations (EHOs) in JET plasmas. Although the ELMy database scans pedestal collisionality and β values typical of ET-carbon quiescent operation, shaping and current are not simultaneously compatible with EHO existence. Nevertheless, ILW operation with JET-carbon quiescent-like parameters could in principle be achieved, and improved pedestal performance could be observed in more recent JET-ILW pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vortical flow computations on a flexible blended wing-body configuration

Flows over blended wing-body configurations are often dominated by vortices. The unsteady aerodynamic forces due to such flows can couple with the elastic forces of the wing and lead to aeroelastic oscillations. Such aeroelastic oscillations can impair the performance of an aircraft; it is necessary to account for structural properties of the configuration and solve the aerodynamic and aeroelastic equations of motion simultaneously. The flow is modeled using the Navier-Stokes equations coupled with the aeroelastic equations of motion. Computations are made for a blended wing-body configuration at flow conditions dominated by vortices and separation. The computed results are validated with the available experimental data. Sustained aeroelastic oscillations observed in the wind tunnel are successfully simulated for freestream Mach = 0.975, alpha of 8.0 deg, and a frequency of about 2 Hz.

Guruswamy, Guru P.↗