Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconducting films”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Fabrication and chemical composition of RF magnetron sputtered Tl-Ca-Ba-Cu-O high Tc superconducting thin films

The preparation of TlCaBaCuO superconducting thin films on (100) SrTiO3 substrates is described, and the results of their characterization are presented. Sintering and annealing the thin films in a Tl-rich ambient yielded superconductivity with a Tc of 107 K. The results of an XPS study support two possible mechanisms for the creation of holes in the TlCaBaCuO compound: (1) partial substitution of Ca(2+) for Tl(3+), resulting in hole creation, and (2) charge transfer from Tl(3+) to the CuO layers, resulting in a Tl valence between +3 and +1.

Subramanyam, G.↗
DOE OSTI2026

Atomic-Scale Characterization and Electronic Properties of Gold-Capped Niobium Films for Superconducting Qubits

Niobium thin films are central to superconducting qubits, but their complex native oxides contribute significantly to microwave losses. A promising mitigation strategy is to suppress oxide formation using engineered thin-film encapsulation layers. Recent experiments have shown that ∼10 nm metallic overlayers on Nb capacitor films can improve the energy relaxation time T1 of transmon qubits. Here, we present a comparative study of Au-capped Nb films fabricated in situ by molecular beam epitaxy and ex situ by sequential deposition benchmarked against bare Nb films. Using complementary structural, chemical, and spectroscopic techniques, we correlate the interface quality with superconducting electronic properties of the Au surface. Low-temperature scanning tunneling spectroscopy (STS) provides spatially resolved quasiparticle density-of-states maps. While both Au-capped Nb samples exhibit large areas with uniform, fully gapped density of states, clear differences emerge between the two interfaces. Compared to in situ Nb-Au, ex situ Nb-Au exhibits a reduced induced superconducting gap, broadened coherence peak, and localized in-gap states, consistent with a residual NbxOy layer at the interface. Supported by complementary structural and chemical analyses, these findings demonstrate that STS directly links nanoscale superconducting properties to interface preparation, highlighting the importance of controlled in situ encapsulation for minimizing dissipation and improving quantum coherence.

Makita, Junki [MIT; Temple U.] (ORCID:000000026889↗
NASA NTRS2006

Techniques for Connecting Superconducting Thin Films

Several improved techniques for connecting superconducting thin films on substrates have been developed. The techniques afford some versatility for tailoring the electronic and mechanical characteristics of junctions between superconductors in experimental electronic devices. The techniques are particularly useful for making superconducting or alternatively normally conductive junctions (e.g., Josephson junctions) between patterned superconducting thin films in order to exploit electron quantum-tunneling effects. The techniques are applicable to both low-Tc and high-Tc superconductors (where Tc represents the superconducting- transition temperature of a given material), offering different advantages for each. Most low-Tc superconductors are metallic, and heretofore, connections among them have been made by spot welding. Most high-Tc superconductors are nonmetallic and cannot be spot welded. These techniques offer alternatives to spot welding of most low-Tc superconductors and additional solutions to problems of connecting most high-Tc superconductors.

Mester, John↗
NASA NTRS1968

Superconductive thin film makes convenient liquid helium level sensor

Sensor consisting of superconductive film mounted on a dipstick measures the level of liquid helium in a Dewar flask. The sensor is made by depositing a thin film of niobium metal to a thickness of 2000 angstroms on a quartz substrate, which is then mounted on a graduated dipstick.

Becker, H. H.↗
NASA NTRS1964

Evaporated thin films

Superconductivity and electric resistance of thin films of tin oxide and vanadium

VANADIUM↗
DOE OSTI2021

Elucidating the local atomic and electronic structure of amorphous oxidized superconducting niobium films

Qubits made from superconducting materials are a mature platform for quantum information science application, such as quantum computing. However, material-based losses are now a limiting factor in reaching the coherence times needed for applications. In particular, knowledge of the atomistic structure and properties of the circuit materials is needed to identify, understand, and mitigate material-based decoherence channels. Here, we characterize the atomic structure of the native oxide film formed on Nb resonators by comparing fluctuation electron microscopy experiments to density functional theory calculations, finding that an amorphous layer is consistent with an Nb 2 O 5 stoichiometry. Comparing x-ray absorption measurements at the Oxygen K edge with first-principles calculations, we find evidence of d-type magnetic impurities in our sample, known to cause impedance in proximal superconductors. This work identifies the structural and chemical composition of the oxide layer grown on Nb superconductors and shows that soft x-ray absorption can fingerprint magnetic impurities in these superconducting systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Magnetic flux distribution, quasiparticle spectroscopy, and quality factors in Nb films for superconducting qubits

Niobium is a practical material platform for superconducting microwave circuits; however, device-level performance can vary significantly depending on film growth and processing conditions. We compare three epitaxial Nb films grown on $c-$plane sapphire substrates under nominally identical conditions, except for the deposition temperature. To correlate internal quality factors, $Q_{\mathrm {i}}$, with material properties, we combine magneto-optical imaging of magnetic flux distribution with quasiparticle spectroscopy via measurements of the London penetration depth, $λ(T)$. In the low-$Q_{\mathrm i}$ film, there is a lesser ability to screen the magnetic field and an irregular temperature variation of $λ(T)$, implying the existence of localized in-gap states. High $Q_{\mathrm i}$ films show the opposite trend. We conclude that our measurements provide an efficient method for characterizing and optimizing superconducting films for quantum informatics applications.

Datta, Amlan [Ames Lab; Iowa State U.]↗
NASA NTRS2007

Wide-Band, High-Quantum-Efficiency Photodetector

A design has been proposed for a photodetector that would exhibit a high quantum efficiency (as much as 90 percent) over a wide wavelength band, which would typically be centered at a wavelength of 1.55 m. This and similar photodetectors would afford a capability for detecting single photons - a capability that is needed for research in quantum optics as well as for the practical development of secure optical communication systems for distribution of quantum cryptographic keys. The proposed photodetector would be of the hot-electron, phonon-cooled, thin-film superconductor type. The superconducting film in this device would be a meandering strip of niobium nitride. In the proposed photodetector, the quantum efficiency would be increased through incorporation of optiA design has been proposed for a photodetector that would exhibit a high quantum efficiency (as much as 90 percent) over a wide wavelength band, which would typically be centered at a wavelength of 1.55 m. This and similar photodetectors would afford a capability for detecting single photons - a capability that is needed for research in quantum optics as well as for the practical development of secure optical communication systems for distribution of quantum cryptographic keys. The proposed photodetector would be of the hot-electron, phonon-cooled, thin-film superconductor type. The superconducting film in this device would be a meandering strip of niobium nitride. In the proposed photodetector, the quantum efficiency would be increased through incorporation of opti-

Jackson, Deborah↗
DOE OSTI2026

Emergent anisotropic three-phase order in critically doped superconducting diamond films

Two decades since its discovery, superconducting heavily boron-doped diamond (HBDD) still poses fundamental questions that need to be answered to unlock its full potential for quantum applications. We use electrical magnetotransport measurements of critically doped homoepitaxial single crystal HBDD films to reveal signatures of intrinsically granular superconductivity. By studying the dependence of electrical resistivity on temperature and magnetic field vector, we infer that this granularity arises from doping induced disorder. We observe an unexpected three-phase anisotropy in the magnetoresistance, accompanied by a spontaneous transverse voltage (Hall anomaly). Our findings indicate the emergence of an anisotropic order in an otherwise isotropic single crystal HBDD film, offering insights into the mechanism of superconductivity in this quantum material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Effects of residual oxygen on superconducting niobium films

The integration of niobium (Nb) into emerging superconducting circuits can enhance their performance and function. However, growth of high purity Nb can be challenging due to its high reactivity with oxygen. Here, in this study, we examine the role of residual oxygen inside the growth chamber in transforming the structural, chemical, and superconducting properties of Nb films. We demonstrate that an increase in unintentional oxygen impurities lowers the superconducting critical temperature of Nb. This evolution coincides with the reduction of Nb crystal domains, which are separated by highly disordered oxygen-rich regions. Moreover, chemical analysis reveals the formation of niobium monoxide within the film during growth. These findings provide a comprehensive picture of how residual oxygen in the growth chamber can affect the properties of the Nb films. This study contributes to the materials science and engineering knowledge of superconducting Nb growth.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Low temperature phase formation of Tl-based superconducting thin films in reduced oxygen atmosphere

Tl-Ba-Cu-Cu-O superconducting thin films were prepared by magnetron sputtering with postannealing in a reduced oxygen atmosphere. Single-phase Tl2Ba2Ca2Cu3O(x) can form on the MgO substrate at 800 C under P(O2) about 0.1 atm. However the phase formation temperature can be affected by the starting composition of the film. Tl1Ba2Ca2Cu3O(x) phase can be formed by simply lowering the Tl2O pressure. The thermal stability of Tl1Ba2Ca2Cu3O(x) phase was studied by resistivity measurements at high temperatures.

Wu, C. Y.↗
NASA NTRS1991

Microwave properties of YBa2Cu3O(7-delta) high-transition-temperature superconducting thin films measured by the power transmission method

The microwave response of YBa2Cu3O(7-delta) superconducting thin films deposited on LaAlO3, MgO, YSZ, and LaGaO3 substrates are studied. It is found that the microwave transmission properties are very weakly dependent on temperature in the normal state but change drastically upon transition to the superconducting state. In particular, the transmission decreases and there is a negative phase shift with respect to the phase at room temperature when the sample is cooled through its transition temperature. The magnetic penetration depth for all the films was determined from the surface reactance of the films. The microwave complex conductivity is determined in both the normal and the superconducting state. It is observed that both sigma1 and sigma2 increase in transition to the superconducting state. The surface resistivity is calculated for all the films.

Miranda, F. A.↗
NASA NTRS1990

In Situ deposition of YBCO high-T(sub c) superconducting thin films by MOCVD and PE-MOCVD

Metalorganic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T( sub c) greater than 90 K and Jc approx. 10 to the 4th power A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metalorganic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology.

Zhao, J.↗