Some new aspects in stimulated raman scattering from hydrogen gas.
Stimulated Raman scattering from hydrogen gas, discussing simultaneous SRS of harmonic ruby radiation and vibrational rotational lines
Duardo, J. A.↗
SEARCH · Engineering Papers
Results for “SrS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Planting data and wheat yield models
The author has identified the following significant results. A variable date starter model for spring wheat depending on temperature was more precise than a fixed date model. The same conclusions for fall-planted wheat were not reached. If the largest and smallest of eight temperatures were used to estimate daily maximum and minimum temperatures; respectively, a 1-4 F bias would be introduced into these extremes. For Kansas, a reduction of 0.5 bushels/acre in the root-mean-square-error between model and SRS yields was achieved by a six fold increase (7 to 42) in the density of weather stations. An additional reduction of 0.3 b/A was achieved by incorporating losses due to rusts in the model.
Feyerherm, A. M.↗
Two phase sampling for wheat acreage estimation
A two phase LANDSAT-based sample allocation and wheat proportion estimation method was developed. This technique employs manual, LANDSAT full frame-based wheat or cultivated land proportion estimates from a large number of segments comprising a first sample phase to optimally allocate a smaller phase two sample of computer or manually processed segments. Application to the Kansas Southwest CRD for 1974 produced a wheat acreage estimate for that CRD within 2.42 percent of the USDA SRS-based estimate using a lower CRD inventory budget than for a simulated reference LACIE system. Factor of 2 or greater cost or precision improvements relative to the reference system were obtained.
Thomas, R. W.↗
Application of wheat yield model to United States and India
The author has identified the following significant results. The wheat yield model was applied to the major wheat-growing areas of the US and India. In the US Great Plains, estimates from the winter and spring wheat models agreed closely with USDA-SRS values in years with the lowest yields, but underestimated in years with the highest yields. Application to the Eastern Plains and Northwest indicated the importance of cultural factors, as well as meteorological ones in the model. It also demonstrated that the model could be used, in conjunction with USDA-SRRS estimates, to estimate yield losses due to factors not included in the model, particularly diseases and freezes. A fixed crop calendar for India was built from a limited amount of available plot data from that country. Application of the yield model gave measurable evidence that yield variation from state to state was due to different mixes of levels of meteorological and cultural factors.
Feyerherm, A. M.↗
Two phase sampling for wheat acreage estimation
A two-phase Landsat-based sample allocation and wheat proportion estimation method was developed. The technique employs manual, Landsat full frame-based wheat or cultivated land proportion estimates from a large number of segments comprising a first sample phase to optimally allocate a small phase-two sample of computer or manually processed segments. Proportion estimates from each phase are then linked by regression or probability proportional to estimated size estimators to provide wheat proportion estimates and standard errors by reporting unit. Application to the Kansas Southwest CRD (Crop Reporting District) for 1974 produced a wheat acreage estimate for that CRD within 2.42% of the USDA SRS-based estimate using a lower CRD inventory budget than for a simulated reference LACIE (Large Area Crop Inventory Experiment) system.
Thomas, R. W.↗
Two phase sampling for wheat acreage estimation
A two phase Landsat-based sample allocation and wheat proportion estimation method was developed. This technique employs manual, Landsat full frame-based wheat or cultivated land proportion estimates from a large number of segments comprising a first sample phase to optimally allocate a smaller phase two sample of computer or manually processed segments. Application to the Kansas Southwest CRD for 1974 produced a wheat acreage estimate for that CRD within 2.42 percent of the USDA SRS-based estimate using a lower CRD inventory budget than for a simulated reference LACIE system. Factor of 2 or greater cost or precision improvements relative to the reference system were obtained
Thomas, R. W.↗
Large Area Crop Inventory Experiment (LACIE). First interim phase 3 evaluation report
The author has identified the following significant results. LACIE acreage estimates were in close agreement with SRS estimates, and an operational system with a 14 day LANDSAT data turnaround could have produced an accurate acreage estimate (one which satisfied the 90/90 criterion) 1 1/2 to 2 months before harvest. Low yield estimates, resulting from agromet conditions not taken into account in the yield models, caused production estimates to be correspondingly low. However, both yield and production estimates satisfied the LACIE 90/90 criterion for winter wheat in the yardstick region.
Source record↗
Documentation for the machine-readable version of the Perth 70: A catalogue of positions of 24900 stars tape B, mean values of the observation
The Perth 70 catalog contains accurate positions of 24978 stars, plus other useful data such as approximate proper motions, radial velocities, and parallaxes. The Perth 70 is a result of meridian circle observations made by the Hamburg observatory expedition to Perth as part of the international effort of Southern References Stars (SRS). Tape B, which contains mean values of the observations and corresponds to the printed catalog is described.
Warren, W. H., Jr.↗
Technology and development requirements for advanced coal conversion systems
A compendium of coal conversion process descriptions is presented. The SRS and MC data bases were utilized to provide information paticularly in the areas of existing process designs and process evaluations. Additional information requirements were established and arrangements were made to visit process developers, pilot plants, and process development units to obtain information that was not otherwise available. Plant designs, process descriptions and operating conditions, and performance characteristics were analyzed and requirements for further development identified and evaluated to determine the impact of these requirements on the process commercialization potential from the standpoint of economics and technical feasibility. A preliminary methodology was established for the comparative technical and economic assessment of advanced processes.
Source record↗
The use of large-area spectral data in wheat yield estimation
Large-area relations between satellite spectral data and end-of-season crop yield were investigated. Green Index Number (GIN) values from Landsat MSS data of sample segments throughout the U.S. Great Plains winter wheat belt in 1978 were correlated to county USDA-SRS reported yields. A linear relation between GIN and yield appeared to exist up to GIN values of 40 or 50, covering cases of severe to moderate stress. In a test on 1978 Texas winter wheat at the county level, GIN values for sample segments in the counties were used in conjunction with an agronomic-meteorological yield model. The combined fit explained significantly more of the observed yield variation at the county level than the agromet model alone.
Barnett, T. L.↗
Exicimer lidar measurements of ozone
The observation of the atmospheric ozone profile in an altitude range of 3 to 28 km by means of differential absorption lidar in combination with an XeCl laser (308 nm) and SRS pumped by a KrF laser (249 nm) is discussed.
Shibata, T.↗
Raman-shifted dye laser for water vapor DIAL measurements
For improved DIAL measurements of water vapor in the upper troposphere or lower stratosphere, narrowband (about 0.03/cm) laser radiation at 720- and 940-nm wavelengths was generated by stimulated Raman scattering (SRS), using the narrow linewidth (about 0.02/cm) output of a Nd:YAG-pumped dye laser. For a hydrogen pressure of 350 psi, the first Stokes conversion efficiencies to 940 nm were 20 percent and 35 percent, when using a conventional and waveguide Raman cell, respectively. The linewidth of the first Stokes line at high cell pressures, and the inferred collisional broadening coefficients, agree well with those previously measured in spontaneous Raman scattering.
Grossmann, B. E.↗
The reflectance of Ames 24E, Infrablack, and Martin black
Results are reported from measurements of the specular reflectances (SRs) and bidirectional reflectance distribution functions (BRDFs) of three black optical coatings in the FIR wavelength range. The nonspecular reflectometer apparatus described by Smith (1984) is employed, and the data are presented in tables and graphs and discussed in detail. It is found that Ames 24E has an FIR SR one order of magnitude lower than that of Martin black (MB), with BRDF values characteristic of a nearly Lambertian surface, while Infrablack has SR two orders lower than MB and a specular-diffuse surface; MB itself has a very specular surface.
Smith, Sheldon M.↗
Airbus windshear warning and guidance system
From its first designed airplane, Airbus considered mandatory a help in the crew's decision-making process to initiate an escape maneuver and help to successfully realize it. All the Airbus airplanes designed since 1975 included an alpha-floor function and a speed reference control law imbedded in the speed reference system (SRS) box for A 300 and FAC and FCC for A 310, A300/600 and the A 320. Alpha-Floor function takes into account the airplane energy situation considering angle of attack and observed longitudinal situation in order to apply immediately the full power without any pilot action. Speed reference managers control airspeed and/or ground speed in order to survive a maximum in shear situation. In order to comply with the new FAA regulation: Aerospatiale and Airbus developed more efficient systems. A comparison between 1975 and a newly developed system is given. It is explained how the new system improves the situation.
Bonafe, J. L.↗
Design and operation of the U.S. Space Station Freedom Propulsion System
The propulsion functions for the U.S. Space Station Freedom (SSF) are accomplished by two separate systems, the Primary Propulsion System and the Supplemental Reboost System (SRS). The Primary Propulsion System includes self-contained hydrazine modules for station reboost, attitude control and contingency maneuvers. These Propulsion Modules contain reboost and attitude control thrusters, propellant storage, thermal conditioning and electronic controls. The modules are serviced on the ground and launched on the Space Shuttle as replacements for the on-orbit modules which have expended their propellant. The expended modules are returned to the ground for reservicing and subsequent reuse. The Supplemental Reboost System includes a Waste Gas Assembly and Resistojet Modules which are used for reboost maneuvers only. The Waste Gas Assembly contains waste gas storage, compressors and dryers and the Resistojet Modules contain multipropellant resistojet thrusters, electronic pressure regulators and power conditioning equipment.
Morano, Joseph S.↗
Stimulated electronic transition concept for an erasable optical memory
A new concept for an erasable optical memory is demonstrated using stimulated electronic transition (SET). Large bandgap semiconductors are suitable materials for the SET medium. The properties of MgS:Eu,Sm and SrS:Eu,Sm as possible media for the SET process are investigated. Quantum storage is achieved in the form of charges in deep levels in the medium and stimulated radiative recombination is used as the reading process. Unlike magneto-optic (M-O) and phase change (PC) processes, optical writing, reading and erasing are achieved without localized heating. The SET process will have an inherently faster data transfer rate and a higher storage density, and the medium will be more durable than the M-O and PC media. A possible application of the SET process in neural networks is also discussed.
Albin, Sacharia↗
IRD dropout study
This final report describes work performed by SRS Technologies for the NASA Marshall Space Flight Center under Contract NAS8-39077, entitled 'Integrated Receiver-Decoder Dropout Study'. The purpose of the study was to determine causes of signal fading effects on ultra-high-frequency (UHF) range safety transmissions to the Space Shuttle during flyout. Of particular interest were deep fades observed at the External Tank (ET) Integrated Receiver-Decoder (IRD) during the flyout interval between solid rocket booster separation and ET separation. Analytical and simulation methods were employed in this study to assess observations captured in flight telemetry data records. Conclusions based on the study are presented in this report, and recommendations are given for future experimental validation of the results.
Yalowitz, Jeffrey S.↗
Formalizing structured file services for the data storage and retrieval subsystem of the data management system for Spacestation Freedom
A brief example of the use of formal methods techniques in the specification of a software system is presented. The report is part of a larger effort targeted at defining a formal methods pilot project for NASA. One possible application domain that may be used to demonstrate the effective use of formal methods techniques within the NASA environment is presented. It is not intended to provide a tutorial on either formal methods techniques or the application being addressed. It should, however, provide an indication that the application being considered is suitable for a formal methods by showing how such a task may be started. The particular system being addressed is the Structured File Services (SFS), which is a part of the Data Storage and Retrieval Subsystem (DSAR), which in turn is part of the Data Management System (DMS) onboard Spacestation Freedom. This is a software system that is currently under development for NASA. An informal mathematical development is presented. Section 3 contains the same development using Penelope (23), an Ada specification and verification system. The complete text of the English version Software Requirements Specification (SRS) is reproduced in Appendix A.
Jamsek, Damir A.↗