Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solar Inverter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

The influence of NO and ClO variations at twilight on the interpretation of solar occultation measurements

Measurement of short-lived photochemically-produced species in the stratosphere by solar occultation is difficult because the rapid variation of such species near the terminator introduces ambiguities in interpreting the measured absorption in terms of meaningful atmospheric abundances. These variations produce tangent path concentrations that are asymmetric relative to the tangent point, as opposed to the symmetrical distribution usually assumed in most inversion algorithms. Neglect of this asymmetry may yield an inverted profile that deviates significantly from the true sunset/sunrise profile. In the present paper, the influence of this effect on solar occultation measurements of ClO and NO is examined. The results show that average inhomogeneity factors, which measure the concentration variation along the tangent path and which can be calculated from a photochemical model, can indicate which species require more careful data analysis.

Boughner, R.↗
NASA NTRS1982

Global distribution of stratospheric aerosols by satellite measurements

A description is given of the first-ever global stratospheric aerosol climatology which is being developed by the earth-orbiting SAM II and SAGE satellite-based sensors. These sensors use the technique of solar occulation; that is, for every spacecraft sunrise and sunset, the modulation of solar intensity caused by the intervening earth-limb is measured. These data are mathematically inverted to yield vertical profiles of aerosol extinction coefficients with 1 km resolution. The data show seasonal variations which are similar in each hemisphere, with strong correlation between aerosol extinction and the corresponding temperature field. Typical values of extinction in the stratosphere are found to be about 0.0001 to 0.0002 per km at 1 micrometer; stratospheric optical depths at this wavelength are about 0.002. The peak extinction in the stratospheric aerosol layer follows the tropopause with altitude, with peak extinction ratios about 10 km above the local tropopause.

Mccormick, M. P.↗
NASA NTRS2010

Electrostatic Discharge Test of Multi-Junction Solar Array Coupons After Combined Space Environmental Exposures

A set of multi-junction GaAs/Ge solar array test coupons were subjected to a sequence of 5-year increments of combined environmental exposure tests. The test coupons capture an integrated design intended for use in a geosynchronous (GEO) space environment. A key component of this test campaign is conducting electrostatic discharge (ESD) tests in the inverted gradient mode. The protocol of the ESD tests is based on the ISO/CD 11221, the ISO standard for ESD testing on solar array panels. This standard is currently in its final review with expected approval in 2010. The test schematic in the ISO reference has been modified with Space System/Loral designed circuitry to better simulate the on-orbit operational conditions of its solar array design. Part of the modified circuitry is to simulate a solar array panel coverglass flashover discharge. All solar array coupons used in the test campaign consist of 4 cells. The ESD tests are performed at the beginning of life (BOL) and at each 5-year environment exposure point. The environmental exposure sequence consists of UV radiation, electron/proton particle radiation, thermal cycling, and ion thruster plume. This paper discusses the coverglass flashover simulation, ESD test setup, and the importance of the electrical test design in simulating the on-orbit operational conditions. Results from 5th-year testing are compared to the baseline ESD characteristics determined at the BOL condition.

Wright, Kenneth H.↗
NASA NTRS1987

Inferring spectral reflectances of plant elements by simple inversion of bidirectional reflectance measurements

Inverting previously developed explicit expressions for a vertical architecture, bidirectional reflectances measured over corn viewing from the solar quadrant at azimuths near the principal plane are used to determine the spectral reflectances of plant elements. The leaf reflectance values extracted in three visible bands at viewing zenith angles of 70 deg, 60 deg, and 45 deg agree closely with laboratory-measured reflectances of corn leaves. At viewing zenith angle of 30 deg, the inversion breaks down, inasmuch as the inferred plant element reflectances are too high. Satisfactory results are also achieved when the same approach is applied to bidirectional reflectances measured over potted balsam firs, but when applied to soybeans reflectances, the procedure yields unreasonably high leaf reflectances. The failure in this case is attributed to the nonvertical architecture of the soybean canopy; however, for this canopy, inversion based on horizontal architecture is possible. The bidirectional reflectances measured from the solar quadrant, at viewing angles appreciably far from 'hot spot' viewing, approximately equal in magnitude half of the leaf reflectance. The 0.5 ratio is predicted by a previous analysis of opaque horizontal Lambertian facets, as the asymptotic value for a dense canopy at any viewing angle. For soybeans, this ratio applies very closely at 15 deg viewing zenith angle. The results suggest that inversion based on simple architecture, applying explicit expressions, might be of value, either in itself or as a preliminary step before inversion applying complex models.

Otterman, J.↗
NASA NTRS1980

Determination of the complex refractive index and size distribution of atmospheric particulates from bistatic-monostatic lidar and solar radiometer measurements

A method is presented for inferring both the size distribution and the complex refractive index of atmospheric particulates from combined bistatic-monostatic lidar and solar radiometer observations. The basic input measurements are spectral optical depths at several visible and near-infrared wavelengths as obtained with a solar radiometer and backscatter and angular scatter coefficients as obtained from a biostatic-monostatic lidar. The spectral optical depth measurements obtained from the radiometer are mathematically inverted to infer a columnar particulate size distribution. Advantage is taken of the fact that the shape of the size distribution obtained by inverting the particulate optical depth is relatively insensitive to the particle refractive index assumed in the inversion. Bistatic-monostatic angular scatter and backscatter lidar data are then processed to extract an optimum value for the particle refractive index subject to the constraint that the shape of the particulate size distribution be the same as that inferred from the solar radiometer data. Specifically, the scattering parameters obtained from the bistatic-monostatic lidar data are compared with corresponding theoretical computations made for various assumed refractive index values. That value which yields best agreement, in a weighted least squares sense, is selected as the optimal refractive index estimate. The results of this procedure applied to a set of simulated measurements as well as to measurements collected on two separate days are presented and discussed.

Reagan, J. A.↗
NASA NTRS1986

The Stratospheric Aerosol and Gas Experiment II (SAGE II) design and in-orbit performance

The design and in-orbit performance data are presented for the Stratospheric Aerosol and Gas Experiment II (SAGE II) instrument which was launched by Shuttle on the Earth Radiation Budget Satellite. SAGE II is a sun photometer that measures the extinction of solar radiation caused by the earth's atmosphere in seven spectral channels ranging in center wavelength from 0.385 to 1.02 micrometers. These measurements, which occur twice each orbit during satellite sunrise and sunset, are inverted to yield vertical distributions of stratospheric aerosols, ozone, water vapor, and nitrogen dioxide. The SAGE II instrument consists of a Cassegrain telescope with a two axis gimbal mounting, a grating spectrometer, and a 12 bit data system. The instrument tracks the solar centroid in the azimuth plane and vertically scans the instrument's instantaneous field of view across the sun for tangent altitudes ranging from the earth's horizon to 150 km. SAGE II is a third generation instrument following the highly successful Stratospheric Aerosol Measurement II (SAM II) and SAGE I programs.

Mauldin, L. E., III↗
NASA NTRS1991

Bounds on intergalactic compact objects from observations of compact radio sources

The constraints that can be imposed on the cosmic density of uniformly distributed intergalactic compact objects in the mass range of 10 million to 1 billion solar masses, using VLBI observations of compact radio sources. A compact object at a sufficiently small angular separation from a compact radio source produces a deamplified and inverted secondary image. No such cases are known. Using published maps of compact radio sources and assuming an Einstein-de Sitter cosmology, a density parameter for mass in this range greater than 0.4 is excluded at the 99.7 percent confidence level. Observations using the VLBA should allow one to exclude or discover a density parameter greater than about 0.001 for compact objects in the mass range of 0.1-100 solar masses.

Kassiola, Aggeliki↗
NASA NTRS2017

Radar Autofocus Algorithm Incorporating a priori Terrain Knowledge for Correction of Mars’ Ionospheric Distortion in MARSIS Observations

Low-frequency subsurface radar observations of Mars’ polar ice deposits by MARSIS (Mars Advanced Radar for Subsurface and Ionosphere Sounding) are heavily impacted by the electron content of Mars’ ionosphere. The resulting ionospheric distortion can be represented as attenuation and bulk delay, in addition to higher-order frequency dispersion effects. Baseline, uncorrected images are often unusable when the solar zenith angle is less than 90◦ (day side). In this work, a radar autofocus algorithm is developed that estimates and inverts ionospheric distortion, producing a focused radargram of the ice deposit subsurface. Previously published autofocus algorithms have sought to maximize peak-to-noise contrast, which may yield sub-optimal results for complex terrain. Instead, a maximum likelihood approach is developed that incorporates simulated surface clutter returns for the current spacecraft position, based on the Mars Orbiter Laser Altimeter (MOLA) elevation model of the Martian surface. An ancillary product is a surface-only clutter simulation for each orbit, which is necessary to identify true subsurface features.

McMichael, Joseph G.↗
NASA NTRS1981

Silicon-on ceramic process: Silicon sheet growth and device development for the large-area silicon sheet task of the low-cost solar array project

The technical feasibility of producing solar-cell-quality sheet silicon to meet the Department of Energy (DOE) 1986 overall price goal of $0.70/watt was investigated. With the silicon-on-ceramic (SOC) approach, a low-cost ceramic substrate is coated with large-grain polycrystalline silicon by unidirectional solidification of molten silicon. This effort was divided into several areas of investigation in order to most efficiently meet the goals of the program. These areas include: (1) dip-coating; (2) continuous coating designated SCIM-coating, and acronym for Silicon Coating by an Inverted Meniscus (SCIM); (3) material characterization; (4) cell fabrication and evaluation; and (5) theoretical analysis. Both coating approaches were successful in producing thin layers of large grain, solar-cell-quality silicon. The dip-coating approach was initially investigated and considerable effort was given to this technique. The SCIM technique was adopted because of its scale-up potential and its capability to produce more conventiently large areas of SOC.

Grung, B. L.↗
NASA NTRS1991

Ground based infrared measurements of the global distribution of ozone in the atmosphere of Mars

The global distribution of ozone in the atmosphere of Mars was determined from Doppler-limited infrared heterodyne spectroscopy measurements at the NASA Infrared Telescope Facility (IRTF) facility during June 3-7, 1988. Mars spectra near two O3 lines arising from the v sub 3 band near 1031.45 cm (-1) were used. The lines were Doppler shifted out of the strong terrestrial ozone absorption spectrum and its effect was removed. Ozone measurements were obtained at eight beam positions over a range of latitudes and local solar zenith angles. The beam size of the planet was 1.4 arcsec. A Martian CO2 line appeared in the spectra and was inverted to retrieve local temperature profiles. Using these temperature profiles, the total ozone column abundance at each position was retrieved by fitting the measured line with synthetic spectra generated by a radiative transfer program. The only previous measurement of ozone at this season was made above the South polar cap by Mariner 7 and revealed an abundance of 10 micron-atm. However, the retrieved O3 column abundances from this investigation are less than 2.2 micron-atm at all positions sampled. These results are consistent with mid-spring abundances predicted by photochemical models of Liu and Donahue, and Shimazaki and Shimizu.

Kostiuk, Theodor↗
NASA NTRS1992

Shinnery oak bidirectional reflectance properties and canopy model inversion

Field measurements are presented, together with the results of a 3D canopy-model inversion for sand shinnery oak community in western Texas. The spectral bidirectional radiance measurements were in three spectral channels encompassing both the complete land surface and sky hemispheres. The changes in canopy reflectance that occur with variations in solar zenith angle and view direction for two seasons of the year were evaluated, and the 3D radiation-interaction model was inverted to estimate the oak leaf area index and canopy density from the reflectance data.

Deering, Donald W.↗
NASA NTRS2010

Combined Space Environmental Exposure Tests of Multi-Junction GaAs/Ge Solar Array Coupons

A set of multi-junction GaAs/Ge solar array test coupons were subjected to a sequence of 5-year increments of combined environmental exposure tests. The purpose of this test program is to understand the changes and degradation of the solar array panel components, including its ESD mitigation design features in their integrated form, after multiple years (up to 15) of simulated geosynchronous space environment. These tests consist of: UV radiation, electrostatic discharge (ESD), electron/proton particle radiation, thermal cycling, and ion thruster plume exposures. The solar radiation was produced using a Mercury-Xenon lamp with wavelengths in the UV spectrum ranging from 230 to 400 nm. The ESD test was performed in the inverted-gradient mode using a low-energy electron (2.6 - 6 keV) beam exposure. The ESD test also included a simulated panel coverglass flashover for the primary arc event. The electron/proton radiation exposure included both 1.0 MeV and 100 keV electron beams simultaneous with a 40 keV proton beam. The thermal cycling included simulated transient earth eclipse for satellites in geosynchronous orbit. With the increasing use of ion thruster engines on many satellites, the combined environmental test also included ion thruster exposure to determine whether solar array surface erosion had any impact on its performance. Before and after each increment of environmental exposures, the coupons underwent visual inspection under high power magnification and electrical tests that included characterization by LAPSS, Dark I-V, and electroluminescence. This paper discusses the test objective, test methodologies, and preliminary results after 5 years of simulated exposure.

Hoang, Bao↗
NASA NTRS1995

The sensitivity of various mode sets for probing differential rotation shear zones

The potential of future data sets from global oscillations network group (GONG) and solar oscillations investigation (SOI) for resolving long-lived azimuthal jets and shearing flows, is investigated. Various artificial data sets are constructed, containing noise resembling that of a one-year observation run. These are inverted using a two dimensional regularized least squares inversion. The ability of this method to form well localized averages of the rotation rate, as measured by the averaging kernels, is investigated using an extensive mode set and subsets. It is shown that it is possible to keep the noise in the solution down to a few nHz in much of the solar interior, while obtaining a reasonable resolution for a GONG-like data set. At low latitudes in the middle of the convection zone, an angular resolution of less than 10 deg and a radial resolution of about 0.04 solar radii, are obtained. The averaging kernels depend on the mode set, and a reduction in the number of modes tends to introduce small-scale near surface structures into the averaging kernels which would adversely affect the inferred rotation rate.

Christensen-Dalsgaard, Joergen↗
NASA NTRS1997

Structure and Rotation of the Solar Interior: Initial Results from the MDI Medium-L Program

The medium-l program of the Michelson Doppler Imager instrument on board SOHO provides continuous observations of oscillation modes of angular degree, l, from 0 to approximately 300. The data for the program are partly processed on board because only about 3% of MDI observations can be transmitted continuously to the ground. The on-board data processing, the main component of which is Gaussian-weighted binning, has been optimized to reduce the negative influence of spatial aliasing of the high-degree oscillation modes. The data processing is completed in a data analysis pipeline at the SOI Stanford Support Center to determine the mean multiplet frequencies and splitting coefficients. The initial results show that the noise in the medium-l oscillation power spectrum is substantially lower than in ground-based measurements. This enables us to detect lower amplitude modes and, thus, to extend the range of measured mode frequencies. This is important for inferring the Sun's internal structure and rotation. The MDI observations also reveal the asymmetry of oscillation spectral lines. The line asymmetries agree with the theory of mode excitation by acoustic sources localized in the upper convective boundary layer. The sound-speed profile inferred from the mean frequencies gives evidence for a sharp variation at the edge of the energy-generating core. The results also confirm the previous finding by the GONG (Gough et al., 1996) that, in a thin layer just beneath the convection zone, helium appears to be less abundant than predicted by theory. Inverting the multiplet frequency splittings from MDI, we detect significant rotational shear in this thin layer. This layer is likely to be the place where the solar dynamo operates. In order to understand how the Sun works, it is extremely important to observe the evolution of this transition layer throughout the 11-year activity cycle.

Kosovichev, A. G.↗
NASA NTRS2014

Neutrino Physics from the Cosmic Microwave Background and Large Scale Structure

This is a report on the status and prospects of the quantification of neutrino properties through the cosmological neutrino background for the Cosmic Frontier of the Division of Particles and Fields Community Summer Study long-term planning exercise. Experiments planned and underway are prepared to study the cosmological neutrino background in detail via its influence on distance-redshift relations and the growth of structure. The program for the next decade described in this document, including upcoming spectroscopic galaxy surveys eBOSS and DESI and a new Stage-IV CMB polarization experiment CMB-S4, will achieve sigma (sigma*mass(sub v)= 16 meV and sigma (Effective number of neutrino species) = 0.020. Such a mass measurement will produce a high significance detection of non-zero sigma*mass(sub v), whose lower bound derived from atmospheric and solar neutrino oscillation data is about 58 meV. If neutrinos have a minimal normal mass hierarchy, this measurement will definitively rule out the inverted neutrino mass hierarchy, shedding light on one of the most puzzling aspects of the Standard Model of particle physics - the origin of mass. This precise a measurement of Neff will allow for high sensitivity to any light and dark degrees of freedom produced in the big bang and a precision test of the standard cosmological model prediction that the effective number of neutrino species = 3.046.

Neutrinos↗
NASA NTRS1982

Bonder for Solar-Cell Strings

String bonder for solar-cell arrays eliminates tedious manual assembly procedure that could damage cell face. Vacuum arm picks up face-down cell from cell-inverting work station and transfers it to string conveyor without changing cell orientation. Arm is activated by signal from microprocessor.

Garwood, G.↗
NASA NTRS1987

A canopy reflectance model based on an analytical solution to the multiple scattering equation

An approximation to the radiative transfer equation for solar radiation in relatively full, homogeneous plant canopies is presented and solved analytically for solar zenith angles less than 60 deg. The model predicts reflectance at any depth in the canopy and in any direction and may be inverted with bidirectional reflectance measurements. The model was fit to data at two sun angles and two wavebands (visible and NIR) to within the assumed errors on the reflectance data. The calculated albedos are insensitive to achievable measurement errors. Some of the parameter values themselves found by the inversion agree reasonably well with independent measurements, but the uncertainties introduced by the data noise are rather large. However, the agreement is good enough to demonstrate that the model is physically realistic.

Camillo, Peter↗
NASA NTRS1988

The Nimbus 7 LIMS (Limb Infrared Monitor of the Stratosphere) water vapor measurements

Earth orbital instruments, designed to measure the vertical and spatial distribution of atmospheric water vapor is discussed. Specifically, the operation of the Limb Infrared Monitor of the Stratosphere (LIMS) experiment is examined. The LIMS is a six channel limb scanning radiometer that was launched aboard Nimbus 7 in 1978. Profiles of stratospheric and mesospheric temperature, water vapor, and various other constituents were obtained by inverting the LIMS radiance measurements. This same technique was used in 1981 to analyze the data returned from another limb scanning radiometer aboard the Solar Mesosphere Explorer.

Remsberg, Ellis E.↗