Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SnSe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

70 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Domain-dependent strain and stacking in two-dimensional van der Waals ferroelectrics

Van der Waals (vdW) ferroelectrics have attracted significant attention for their potential in next-generation nano-electronics. Two-dimensional (2D) group-IV monochalcogenides have emerged as a promising candidate due to their strong room temperature in-plane polarization down to a monolayer limit. However, their polarization is strongly coupled with the lattice strain and stacking orders, which impact their electronic properties. Here, we utilize four-dimensional scanning transmission electron microscopy (4D-STEM) to simultaneously probe the in-plane strain and out-of-plane stacking in vdW SnSe. Specifically, we observe large lattice strain up to 4% with a gradient across ~50 nm to compensate lattice mismatch at domain walls, mitigating defects initiation. Additionally, we discover the unusual ferroelectric-to-antiferroelectric domain walls stabilized by vdW force and may lead to anisotropic nonlinear optical responses. Our findings provide a comprehensive understanding of in-plane and out-of-plane structures affecting domain properties in vdW SnSe, laying the foundation for domain wall engineering in vdW ferroelectrics.

42 ENGINEERING↗
DOE OSTI2025

Room-temperature multiferroicity in sliding van der Waals semiconductors with sub-0.3 V switching

The search for van der Waals (vdW) multiferroic materials has been challenging but also holds great potential for the next-generation multifunctional nanoelectronics. The group-IV monochalcogenide, with an anisotropic puckered structure and an intrinsic in-plane polarization at room temperature, manifests itself as a promising candidate with coupled ferroelectric and ferroelastic order as the basis for multiferroic behavior. Unlike the intrinsic centrosymmetric AB stacking, we demonstrate a multiferroic phase of tin selenide (SnSe), where the inversion symmetry breaking is maintained in AA-stacked multilayers over a wide range of thicknesses. We observe that an interlayer-sliding-induced out-of-plane (OOP) ferroelectric polarization couples with the in-plane (IP) one, making it possible to control out-of-plane polarization via in-plane electric field and vice versa. Notably, thickness scaling yields a sub-0.3 V ferroelectric switching, which promises future low-power-consumption applications. Furthermore, coexisting armchair- and zigzag-like structural domains are imaged under electron microscopy, providing experimental evidence for the degenerate ferroelastic ground states theoretically predicted. Non-centrosymmetric SnSe, as the first layered multiferroic at room temperature, provides a novel platform not only to explore the interactions between elementary excitations with controlled symmetries, but also to efficiently tune the device performance via external electric and mechanical stress.

Chen, Rui [University of California, Berkeley, CA ↗
DOE OSTI2020

Materials Data on Co2SnC8SeO8 by Materials Project

(Co(CO)4)2SnSe crystallizes in the orthorhombic Fddd space group. The structure is zero-dimensional and consists of thirty-two Co(CO)4 clusters and eight SnSe clusters. In each Co(CO)4 cluster, Co2+ is bonded in a trigonal pyramidal geometry to four C+1.25+ atoms. There is two shorter (1.77 Å) and two longer (1.78 Å) Co–C bond length. There are four inequivalent C+1.25+ sites. In the first C+1.25+ site, C+1.25+ is bonded in a linear geometry to one Co2+ and one O2- atom. The C–O bond length is 1.16 Å. In the second C+1.25+ site, C+1.25+ is bonded in a linear geometry to one Co2+ and one O2- atom. The C–O bond length is 1.16 Å. In the third C+1.25+ site, C+1.25+ is bonded in a linear geometry to one Co2+ and one O2- atom. The C–O bond length is 1.16 Å. In the fourth C+1.25+ site, C+1.25+ is bonded in a linear geometry to one Co2+ and one O2- atom. The C–O bond length is 1.16 Å. There are four inequivalent O2- sites. In the first O2- site, O2- is bonded in a single-bond geometry to one C+1.25+ atom. In the second O2- site, O2- is bonded in a single-bond geometry to one C+1.25+ atom. In the third O2- site, O2- is bonded in a single-bond geometry to one C+1.25+ atom. In the fourth O2- site, O2- is bonded in a single-bond geometry to one C+1.25+ atom. In each SnSe cluster, Sn4+ is bonded in an L-shaped geometry to two equivalent Se2- atoms. Both Sn–Se bond lengths are 2.60 Å. Se2- is bonded in an L-shaped geometry to two equivalent Sn4+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Investigation of Thermal Properties of 2D Materials [Dissertation]

Studying the thermal conductivity of 2D materials is important due to the applications of 2D materials in fields such as thermal management, thermoelectricity, renewable energy, and sensors. As such, measurements of the thermal conductivity of these 2D materials become important to measure. Thermal conductivity is often difficult to measure for 2D materials due to their atomically thin nature and many experimental methods for doing so requiring contact with the sample, which can alter the thermal properties. A non-contact method for calculating the thermal conductivity of 2D materials supported on substrates in order to model the thermal conductivity of 2D materials for devices, is proposed and experimentally performed in this dissertation. The optothermal Raman technique is a useful non-contact diagnostic technique useful in determining the thermal conductivity of 2D materials. The optothermal Raman typically does not account for heat losses due to convection or radiation or substrate resistance, which are shown to be important factors to consider when developing an optothermal Raman model. Additionally, the calculation of the interfacial thermal conductance between the bottom surface of the sample and the top surface of the substrate, plays an important role in determining the final value of the thermal conductivity of a supported sample, and will yield differing results based on whether or not the conductance is calculated using an approach such as the Diffuse Mismatch Model (DMM) or calculated directly by varying the laser heating profile (usually done by changing the laser objective). This is shown to be the case for both graphene on Ni, graphene on Cu, and SnSe 2 on Cu. In addition to experimentally calculating the thermal conductivity of a 2D material with the optothermal Raman technique, the thermal conductivity of 2D materials can also be calculated using computational methods. The three-phonon method is a method which can be used to simulate phonon scattering processes and determine the thermal conductivity of semiconductors, wherein phonon scattering is the dominant mechanism which determines the thermal conductivity. The three-phonon method uses relaxation times for phonon scattering with other phonons, electrons, and other material system elements, such as isotopes or material defects, in order to create a single-mode relaxation time approximation (SMRTA), which is used to calculate the final value of the thermal conductivity. An important consideration when determining the thermal conductivity of a 2D material using this method is the device geometry, which is reflected in this work as the phonon-boundary scattering relaxation time. This inclusion is important along with the inclusion of phonon-electron scattering in accurately determining the thermal conductivity of a 2D material. In both the optothermal Raman experiments and the three-phonon method computations, strain is shown to have a demonstrable effect on the thermal conductivity of 2D materials. When a 1.1% strain was applied to the mechanical properties of SnSe, the three-phonon processes yielded a lower thermal conductivity than the no-strain case. For the optothermal Raman experiments, the strain induced in the Cu substrate and transferred to a single-layer graphene (SLG) sample yields a trend where the thermal conductivity of the SLG decreases with respect to strain applied. In the case where the interfacial thermal conductance was calculated directly, the conductance increased with respect to strain applied. This presents strain as a reliable and viable method for tuning the thermal properties of 2D materials for device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Polymorphic Metastability in Colloidal Semiconductor Nanocrystals

Metastable polymorphs of inorganic solids often possess material properties not present in the corresponding thermodynamic polymorphs, making them targets for the development of new functional materials. In contrast with isolating metastable bulk materials, syntheses of metastable polymorphs on the nanoscale are aided by fast non-equilibrium reaction kinetics and the favorable thermodynamic influence of surface energies, giving rise to greater ease of access to metastable high-temperature polymorphs and, in some cases, new polymorphs that do not exist in the bulk. The syntheses of metastable semiconductor nanocrystals are of interest for their potentially unique optoelectronic and physicochemical properties. However, in many material systems, synthesizing nanocrystalline products away from thermodynamic equilibrium in a predictable manner remains an outstanding challenge. This review outlines direct synthetic methodologies that have been developed to enable control over the nucleation and growth of metastable polymorphs of semiconductor nanocrystals by tailoring reaction conditions, precursor kinetics, ligand and surface effects, and other synthetic levers. The case studies reviewed herein expound on the direct syntheses of metastable ZnSe, Cu 2 SnSe 3 , CuInSe 2 , Ag 2 Se, and AgInSe 2 nanocrystals, and although there remain numerous examples of metastable nanocrystal syntheses outside of these metal chalcogenide systems, the concepts discussed are of general utility to the field of metastable nanocrystal syntheses as a whole. Explicit examples in which new functional properties are afforded by metastable polymorphs of the aforementioned material systems are presented within the context of applications for solar cells, photonics, and optical sensing. Finally, the factors that affect the kinetic persistence of metastable nanocrystalline polymorphs are discussed at length for these material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Single Crystalline GeSe Van Der Waals Ribbons With Uniform Layer Stacking, High Carrier Mobility, and Adjustable Edge Morphology

Abstract Performance of the group IV monochalcogenide GeSe in solar cells, electronic, and optoelectronic devices is expected to improve when high‐quality single crystalline material is used rather than polycrystalline films. Crystalline flakes represent an attractive alternative to bulk single crystals as their synthesis may be developed to be scalable, faster, and with higher overall yield. However, large – and especially large and thin – single crystal flakes are notoriously hard to synthesize. Here it is demonstrated that vapor‐liquid‐solid growth combined with direct lateral vapor‐solid incorporation produces high‐quality single crystalline GeSe ribbons with tens of micrometers size and controllable thickness. Electron microscopy shows that the ribbons exhibit perfect equilibrium (AB) van der Waals stacking order without extended defects across the entire thickness, in contrast to the conventional case of substrate‐supported flakes where material is added via layer‐by‐layer nucleation and growth on the basal plane. Electrical measurements show anisotropic transport and a high Hall mobility of 85 cm 2 V −1 s −1 , on par with the best single crystals to date. Growth from mixed GeSe and SnSe vapors, finally, yields ribbons with unchanged structure and composition but with jagged edges, promising for applications that rely on ample chemically active edge sites, such as catalysis or photocatalysis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

A Low-Temperature Structural Transition in Canfieldite, Ag 8 SnS 6 , Single Crystals

Canfieldite, Ag 8 SnS 6 , is a semiconducting mineral notable for its high ionic conductivity, photosensitivity, and low thermal conductivity. In this paper, we report the solution growth of large single crystals of Ag 8 SnS 6 of mass up to 1 g from a ternary Ag–Sn–S melt. On cooling from high temperature, Ag 8 SnS 6 undergoes a known cubic ($F\bar{4}3m$) to orthorhombic ($Pna2_1$) phase transition at ≈460 K. By studying the magnetization and thermal expansion between 5–300 K, we discover a second structural transition at ≈120 K. Single crystal X-ray diffraction reveals the low-temperature phase adopts a different orthorhombic structure with space group $Pmn2_1$ ($\textit{a}$ = 7.662 9(5) Å, $\textit{b}$ = 7.539 6(5) Å, $\textit{c}$ = 10.630 0(5) Å, Z = 2 at 90 K) that is isostructural to the room-temperature forms of the related Se-based compounds Ag 8 SnSe 6 and Ag 8 GeSe 6 . The 120 K transition is first-order and has a large thermal hysteresis. On the basis of the magnetization and thermal expansion data, the room-temperature polymorph can be kinetically arrested into a metastable state by rapidly cooling to temperatures below 40 K. We last compare the room- and low-temperature forms of Ag8SnS6 with its argyrodite analogues, Ag 8 TQ 6 ($\textit{T}$ = Si, Ge, Sn; $\textit{Q}$ = S, Se), and identify a trend relating the preferred structures to the unit cell volume, suggesting smaller phase volume favors the $Pna2_1$ arrangement. We support this picture by showing that the transition to the $Pmn2_1$ phase is avoided in Ge alloyed Ag 8 Sn 1–x Ge x S 6 samples as well as in pure Ag 8 GeS 6 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Defects in Layered van der Waals Heterostructures: Implications for Thermoelectrics

Layered van der Waals heterostructures provide extraordinary opportunities for applications such as thermoelectrics and allow for tunability of optical and electronic properties. The performance of devices made from these heterostructures will depend on their properties, which are sensitive to the nanoarchitecture (constituent layer thicknesses, layer sequence, etc.). However, performance will also be impacted by defects, which will vary in concentration and identity with the nanoarchitecture and preparation conditions. Here, we identify several types of defects and propose mechanisms for their formation, focusing on compounds in the ([SnSe] 1+δ ) m (TiSe 2 ) n system prepared using the modulated elemental reactants method. The defects were observed by atomic resolution high-angle annular dark-field scanning transmission electron microscopy and can be broadly categorized into those that form domain boundaries as a result of rotational disorder from the self-assembly process and those that are layer-thickness-related and result from local or global deviations in the amount of material deposited. Furthermore, defect type and density were found to depend on the nanoarchitecture of the heterostructure. Categorizing the defects provides insights into defect formation in these van der Waals layered heterostructures and suggests strategies for controlling their concentrations. Strategies for controlling defect type and concentration are proposed, which would have implications for transport properties for applications in thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High Thermoelectric Performance in the New Cubic Semiconductor AgSnSbSe 3 by High-Entropy Engineering

We investigate the structural and physical properties of the AgSn m SbSe m+2 system with m = 1-20 (i.e., SnSe matrix and ~5-50% AgSbSe 2 ) from atomic, nano, and macro length scales. We find the 50:50 composition, with m = 1 (i.e., AgSnSbSe 3 ), forms a stable cation-disordered cubic rock-salt p-type semiconductor with a special multi-peak electronic valence band structure. AgSnSbSe 3 has an intrinsically low lattice thermal conductivity of ~0.47 W m -1 K -1 at 673 K owing to the synergy of cation disorder, phonon anharmonicity, low phonon velocity, and low-frequency optical modes. Furthermore, Te alloying on Se sites creates a quinary high-entropy NaCl-type solid solution AgSnSbSe 3-x Te x with randomly disordered cations and anions. The extra point defects and lattice dislocations lead to glass-like lattice thermal conductivities of ~0.32 W m -1 K -1 at 723 K and higher hole carrier concentration than AgSnSbSe 3 . Concurrently, the Te alloying promotes greater convergence of the multiple valence band maxima in AgSnSbSe 1.5 Te 1.5 , the composition with the highest configurational entropy. Facilitated by these favorable modifications, we achieve a high average power factor of ~9.54 μW cm -1 K -2 (400-773 K), a peak thermoelectric figure of merit ZT of 1.14 at 723 K, and a high average ZT of ~1.0 over a wide temperature range of 400-773 K in AgSnSbSe 1.5 Te 1.5 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Semiconductor to Topological Insulator Transition Induced by Stress Propagation in Metal Dichalcogenides Core-Shell Lateral Heterostructures

Polymorphic phase transition is an important route for engineering the properties of two-dimensional materials. Heterostructure construction, on the other hand, not only allows the integration of different functionalities for device applications, but also enables the exploration of new physics arising from proximity coupling. Yet, implementing a design that incorporates the advantages of both remains underexplored. Here in this paper, based on comprehensive experimental and theoretical studies of WSe 2 /SnSe 2 core-shell lateral heterostructure, we demonstrate an unexpected H to T' phase transition in transition metal dichalcogenides (TMDs), correlating to a change of materials properties from semiconductor to topological insulator (TI), and propose a novel shell-to-core stress propagation mechanism. This finding offers new insights into TMD phase transition empowered by the rational design of heterostructures. Owing to the superconducting properties of SnSe 2 at low temperatures, the unique TI/superconductor core-shell template is expected to add more arsenals to the ongoing search of Majorana fermions in condensed matter systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Metastable piezoelectric group-IV monochalcogenide monolayers with a buckled honeycomb structure

Multiple two-dimensional materials are being naïvely termed stable on the grounds of displaying phonon dispersions with no negative frequencies and of not collapsing on molecular dynamics calculations at fixed volume. But, if these phases do not possess the smallest possible structural energy, how does one understand and establish their actual meta stability? To answer this question, twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure—belonging to symmetry group P3m1—displaying an out-of-plane intrinsic electric polarization are shown to be metastable by three independent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2 1 (or Pmmn for PbS, PbSe, and PbTe) phase to estimate energy barriers E B that must be overcome during such structural transformation. Using the curvature of the local minima and E B as inputs to Kramers escape formula, large escape times are found, implying the structural metastability of the buckled honeycomb phase (with the exception of PbS and PbSe, these phases display escape times ranging from 700 years to multiple times the age of the universe and can be considered “stable” for practical purposes in that relative sense). The second demonstration is provided by phonon dispersion relations that include the effect of long-range Coulomb forces and display no negative vibrational modes. The third and final demonstration of structural metastability is furnished by room-temperature ab initio molecular dynamics for selected compounds. Here, the magnitude of the electronic band gap evolves with chemical composition. Different from other binary two-dimensional compounds such as transition metal dichalcogenide monolayers and hexagonal boron nitride monolayers which only develop an in-plane piezoelectric response, the twelve group-IV monochalcogenide monolayers with a buckled honeycomb structure also display out-of-plane piezoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Elasticity of two-dimensional ferroelectrics across their paraelectric phase transformation

The mechanical behavior of two-dimensional (2D) materials across 2D phase changes is unknown, and the finite temperature (T) elasticity of paradigmatic SnSe monolayers—ferroelectric 2D materials turning paraelectric as their unit cell turns from a rectangle into a square—is described here in a progressive manner. To begin with, their zero–T total energy landscape gives way to (Boltzmann-like) averages from which the elastic behavior is determined. Furthermore, these estimates are complemented with results from the strain-fluctuation method, which employs the energy landscape or ab initio molecular dynamics data. All approaches capture the coalescence of elastic moduli < C 11 (T) > = < C 22 (T) > due to the structural transformation. The broad evolution and sudden changes of elastic parameters < C 11 (T) >, < C 22 (T) >, and < C 12 (T) > of these atomically thin phase-change membranes establishes a heretofore overlooked connection among 2D materials and soft matter.

2-dimensional systems↗
DOE OSTI2025

Revealing atomic-scale switching pathways in van der Waals ferroelectrics

Two-dimensional (2D) van der Waals (vdW) materials hold the potential for ultrascaled ferroelectric (FE) devices due to their silicon compatibility and robust polarization down to atomic scale. However, the inherently weak vdW interactions enable facile sliding between layers, introducing complexities beyond those encountered in conventional ferroelectric materials and presenting substantial challenges in uncovering intricate switching pathways. Here, we combine atomic-resolution imaging under in situ electrical biasing conditions with first-principles calculations to unravel the atomic-scale switching mechanisms in SnSe, a vdW group IV monochalcogenide. Our results uncover the coexistence of a consecutive 90° switching pathway and a direct 180° switching pathway from antiferroelectric (AFE) to FE order in this vdW system. Atomic-scale investigations and strain analysis reveal that the switching processes simultaneously induce interlayer sliding and compressive strain, while the lattice remains coherent despite the presence of multidomain structures. These findings elucidate vdW ferroelectric switching dynamics at atomic scale and lay the foundation for the rational design of 2D ferroelectric nanodevices.

Li, Xinyan [Rice University, Houston, TX (United S↗
NASA NTRS2011

Forced ion migration for chalcogenide phase change memory device

Non-volatile memory devices with two stacked layers of chalcogenide materials comprising the active memory device have been investigated for their potential as phase change memories. The devices tested included GeTe/SnTe, Ge.sub.2Se.sub.3/SnTe, and Ge.sub.2Se.sub.3/SnSe stacks. All devices exhibited resistance switching behavior. The polarity of the applied voltage with respect to the SnTe or SnSe layer was critical to the memory switching properties, due to the electric field induced movement of either Sn or Te into the Ge-chalcogenide layer. One embodiment of the invention is a device comprising a stack of chalcogenide-containing layers which exhibit phase change switching only after a reverse polarity voltage potential is applied across the stack causing ion movement into an adjacent layer and thus "activating" the device to act as a phase change random access memory device or a reconfigurable electronics device when the applied voltage potential is returned to the normal polarity. Another embodiment of the invention is a device that is capable of exhibiting more that two data states.

Campbell, Kristy A.↗
NASA NTRS2012

Forced ion migration for chalcogenide phase change memory device

Non-volatile memory devices with two stacked layers of chalcogenide materials comprising the active memory device have been investigated for their potential as phase-change memories. The devices tested included GeTe/SnTe, Ge.sub.2Se.sub.3/SnTe, and Ge.sub.2Se.sub.3/SnSe stacks. All devices exhibited resistance switching behavior. The polarity of the applied voltage with respect to the SnTe or SnSe layer was critical to the memory switching properties, due to the electric field induced movement of either Sn or Te into the Ge-chalcogenide layer. One embodiment of the invention is a device comprising a stack of chalcogenide-containing layers which exhibit phase-change switching only after a reverse polarity voltage potential is applied across the stack causing ion movement into an adjacent layer and thus "activating" the device to act as a phase-change random access memory device or a reconfigurable electronics device when the applied voltage potential is returned to the normal polarity. Another embodiment of the invention is a device that is capable of exhibiting more than two data states.

Campbell, Kristy A.↗
NASA NTRS2013

Forced Ion Migration for Chalcogenide Phase Change Memory Device

Non-volatile memory devices with two stacked layers of chalcogenide materials comprising the active memory device have been investigated for their potential as phase-change memories. The devices tested included GeTe/SnTe, Ge2Se3/SnTe, and Ge2Se3/SnSe stacks. All devices exhibited resistance switching behavior. The polarity of the applied voltage with respect to the SnTe or SnSe layer was critical to the memory switching properties, due to the electric field induced movement of either Sn or Te into the Ge-chalcogenide layer. One embodiment of the invention is a device comprising a stack of chalcogenide-containing layers which exhibit phase-change switching only after a reverse polarity voltage potential is applied across the stack causing ion movement into an adjacent layer and thus "activating" the device to act as a phase-change random access memory device or a reconfigurable electronics device when the applied voltage potential is returned to the normal polarity. Another embodiment of the invention is a device that is capable of exhibiting more than two data states.

Campbell, Kristy A↗