SEARCH · Engineering Papers

Results for “Slip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Strike-slip faulting, wrinkle ridges, and time variable stress states in the Coprates Region of Mars

The existence of strike-slip faults was recently documented in two locations on Mars. Two clear examples are reviewed located southeast of Valles Marineris and preliminary evidence is presented for more widespread strike-slip deformation elsewhere in Coprates. The first two examples show that strike-slip faulting occurred in a broad zone east of the Coprates Rise spanning approximately 400 km east-west by perhaps 1000 km north-south. The last example suggests that the growth of major wrinkle ridges throughout Coprates may have been influenced by horizontally directed shear stresses and that more than one generation of ridges was produced. Thus, 'compressional' deformation of ridged plains south of Valles Marineris was spatially heterogeneous and a temporal change in stress may have been involved.

Schultz, Richard A.↗

NASA NTRS1991

Universal behavior in ideal slip

The slip energies and stresses are computed for defect-free crystals of Ni, Cu, Ag, and Al using the many-atom approach. A simple analytical expression for the slip energies is obtained, leading to a universal form for slip, with the energy scaled by the surface energy and displacement scaled by the lattice constant. Maximum stresses are found to be somewhat larger than but comparable with experimentally determined maximum whisker strengths.

Bozzolo, Guillermo↗

NASA NTRS1991

The width of fault zones in a brittle-viscous lithosphere: Strike-slip faults

A fault zone in an ideal brittle material overlying a very weak substrate could, in principle, consist of a single slip surface. Real fault zones have a finite width consisting of a number of nearly parallel slip surfaces on which deformation is distributed. The hypothesis that the finite width of fault zones reflects stresses due to quasistatic flow in the ductile substrate of a brittle surface layer is explored. Because of the simplicity of theory and observations, strike-slip faults are examined first, but the analysis can be extended to normal and thrust faulting.

Parmentier, E. M.↗

NASA NTRS1992

Prediction of performance of two-phase flow nozzle and liquid metal magnetohydrodynamic (LMMHD) generator for no slip condition

Two-phase LMMHD energy conversion systems have potentially significant advantages over conventional systems such as higher thermal efficiency and substantial simplicity with lower capital and maintenance costs. Maintenance of low velocity slip is of importance for achieving high generator efficiency. A bubbly flow pattern ensures very low velocity slip. The full governing equations have been written out, and a computer prediction code has been developed to analyze performance of a two-phase flow LMMHD generator and nozzle under conditions of no slip. Three different shapes of a LMMHD generator have been investigated. Electrical power outputs are in the 20 kW range. Generator efficiency exceeds 71 percent at an average void fraction of about 70 percent. This is an appreciable performance for a short generator without insulating vanes for minimizing electrical losses in the end regions.

Fabris, G.↗

NASA NTRS1994

Improved Slip Casting Of Ceramic Models

Improved technique of investment slip casting developed for making precise ceramic wind-tunnel models. Needed in wind-tunnel experiments to verify predictions of aerothermodynamical computer codes. Ceramic materials used because of their low heat conductivities and ability to survive high temperatures. Present improved slip-casting technique enables casting of highly detailed models from aqueous or nonaqueous solutions. Wet shell molds peeled off models to ensure precise and undamaged details. Used at NASA Langley Research Center to form superconducting ceramic components from nonaqueous slip solutions. Technique has many more applications when ceramic materials developed further for such high-strength/ temperature components as engine parts.

Buck, Gregory M.↗

NASA NTRS1993

Nonaqueous slip casting of high temperature ceramic superconductors using an investment casting technique

A process for slip casting ceramic articles that does not employ parting agents and affords the casting of complete, detailed, precision articles that do not possess parting lines is presented. This process is especially useful for high temperature superconductors and water-sensitive ceramics. A wax pattern for a shell mold is provided, and an aqueous mixture of a calcium sulfate-bonded investment material is applied as a coating to the wax pattern. The coated wax pattern is then dried, followed by curing to vaporize the wax pattern and leave a shell mold of the calcium sulfate-bonded investment material. The shell mold is cooled to room temperature, and a ceramic slip, created by dispersing a ceramic powder in an organic liquid, is poured therein. After a ceramic shell of desired thickness or a solid article has set up in the shell mold, excess ceramic slip is poured out. The shell mold is misted with water and peeled away from the ceramic article, after which the ceramic is fired to provide a complete, detailed, precision, high temperature superconductive ceramic article without parting lines. The casting technique may take place in the presence of a magnetic field to orient the ceramic powders during the casting process.

Hooker, Matthew W.↗

NASA NTRS2011

Interchange Slip-Running Reconnection and Sweeping SEP-Beams

We present a new model to explain how particles, accelerated at a reconnection site that is not magnetically connected to the Earth, could eventually propagate along the well-connected open flux tube. Our model is based on the results of a low-beta resistive magnetohydrodynamics simulation of a three-dimensional line-tied and initially current-free bipole, that is embedded in a non-uniform open potential field. The topology of this configuration is that of an asymmetric coronal null-point, with a closed fan surface and an open outer spine. When driven by slow photospheric shearing motions, field lines, initially fully anchored below the fan dome, reconnect at the null point, and jump to the open magnetic domain. This is the standard interchange mode as sketched and calculated in 2D. The key result in 3D is that, reconnected open field lines located in the vicinity of the outer spine, keep reconnecting continuously, across an open quasi-separatrix layer, as previously identified for non-open-null-point reconnection. The apparent slipping motion of these field lines leads to form an extended narrow magnetic flux tube at high altitude. Because of the slip-running reconnection, we conjecture that if energetic particles would be travelling through, or be accelerated inside, the diffusion region, they would be successively injected along continuously reconnecting field lines that are connected farther and farther from the spine. At the scale of the full Sun, owing to the super-radial expansion of field lines below 3 solar radius, such energetic particles could easily be injected in field lines slipping over significant distances, and could eventually reach the distant flux tube that is well-connected to the Earth.

Masson, S.↗

NASA NTRS1965

Contact stresses calculated for miniature slip rings

Using mathematical formulations to plot the graphs of the contact preload versus the Hertzian load, calculations of unit loading of the preloaded brushes on slip rings can be made. This optimizes the design of contact brushes and miniature slip rings.

Albright, F. G.↗

NASA NTRS1967

Environmental study of miniature slip rings

Investigation studied the long term operation of miniature slip ring assembles in high vacuum of space and included the influence of ring, brush, and insulator materials on electrical noise and mechanical wear. Results show that soft metal vapor plating and niobium diselenide miniature slip rings are beneficial.

Radnik, J. L.↗

NASA NTRS1968

Slip coefficient of a gas.

Slip coefficient of gas calculated from linearized Boltzmann-Bhatnagar-Gross-Krook equation for slip velocity problem

Huang, A. B.↗

NASA NTRS1972

Inorganic glass ceramic slip rings

Prototypes of slip rings have been fabricated from ceramic glass, a material which is highly resistant to deterioration due to high temperature. Slip ring assemblies were not structurally damaged by mechanical tests and performed statisfactorily for 200 hours.

Glossbrenner, E. W.↗

NASA NTRS1972

A study of the frictional and stick-slip behavior of magnetic recording tapes

Methods were developed to determine the coefficient of friction and the extent of stick-slip of magnetic recording tapes. After a preliminary phase during which experimental procedures were established and screening of candidate tapes was carried out, the frictional and stick-slip behavior of four selected tapes, using four different kinds of magnetic heads, was studied at various temperatures, under dry and humid conditions, and in various gaseous atmospheres, such as argon, helium, nitrogen and air. The effects of tape speed and outgassing on the drag properties of the tapes were also studied. A rank was assigned to each tape and magnetic head as a result of these tests. This study helped in the selection of a magnetic tape in a flight project, and will be useful in the consideration of tapes and magnetic heads for future spacecraft applications.

Kalfayan, S. H.↗

NASA NTRS1972

Simplified formula for mean cycle-slip time of phase-locked loops with steady-state phase error.

Previous work shows that the mean time from lock to a slipped cycle of a phase-locked loop is given by a certain double integral. Accurate numerical evaluation of this formula for the second-order loop is extremely vexing because the difference between exponentially large quantities is involved. The presented article demonstrates a method in which a much-reduced precision program can be used to obtain the mean first-cycle slip time for a loop of arbitrary degree tracking at a specified SNR and steady-state phase error. It also presents a simple approximate formula that is asymptotically tight at higher loop SNR.

Tausworthe, R. C.↗

NASA NTRS1972

The fine structure of slip lines in disordered Cu3Au.

The fine structure of the slip bands observed on the surface of a deformed Cu3Au single crystal is examined. The separation distance determined between the resolved individual slip lines is used to examine the calculations of other authors relating the passing stress of a dislocation past a dislocation pileup on a nearby parallel glide plane.

Salama, K.↗

NASA NTRS1972

The liquid metal slip ring experiment for the Communications Technology Satellite.

Description of an experiment designed to demonstrate liquid metal slip ring (LMSR) performance in a space environment. The experiment, based on currently developed LMSR technology, is to make possible an evaluation of those features of a LMSR where improvement in performance over conventional slip rings might be feasible. The experiment-prompting, potential LMSR advantages include: lower electrical noise, higher current capability, higher voltage capability, longer life, and small variation in friction torque.

Lovell, R. R.↗

NASA NTRS1974

The synergistic effects of slip ring-brush design and materials

The design, fabrication, and subsequent testing of four power slip rings for synchronous orbit application are described. The synergistic effects of contact materials and slip ring-brush design are studied by means of frequent and simultaneous recording of friction, wear, and electrical noise. Data generated during the test period are presented along with post test analysis data.

Lewis, N. E.↗

NASA NTRS1975

A three-dimensional viscoelastic model of a strike slip fault

An analytic approximation to the Green's function for the displacements due to a strike slip point source in an elastic layer over a viscoelastic half-space is developed. This approximate Green's function is useful because it can be analytically integrated over the fault surface. Comparison with a numerical integration of the exact solution integral indicates that the approximation is quite good. The approximate Green's function is integrated analytically to obtain the displacements due to a finite rectangular strike slip fault in an elastic layer over a viscoelastic half-space. Ground displacements and angle changes from a model survey net are computed to illustrate the viscoelastic relaxation which follows a fracture in the elastic region.

Rundle, J. B.↗

NASA NTRS1976

High temperature reflectance of hyperpure slip cast silica

An experimental program to optically characterize hyperpure slip cast silica at elevated temperatures is described. This sintered ceramic material is being used in the development of a reflective heat shield for the Outer Planet Entry Probe. A unique high temperature integrating sphere reflectometer is described and reflectance data in the spectral range 0.23-2.3 micron are presented at temperatures up to 1427 C in air and helium environments. Kubelka-Munk (K-M) scattering and absorptance coefficients (K and S), using the Reichman extension of the K-M theory, are presented as is a unique method of obtaining K and S from the Reichman equations using only reflectance data. The hyperpure slip cast silica material was found to retain its high diffuse reflectance at temperatures up to 1204 C, with slight degradation occurring at higher temperatures.

Dillow, C. F.↗