Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sharpen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Notes on Real-Beam Ground Mapping with Monopulse Radar

The spatial awareness required of modern flight systems is facilitated by images generated by ground-mapping radar. In the forward and aft directions, synthetic aperture techniques are not viable, leaving us with enhancing real aperture radar data. Enhancing real aperture radar data with monopulse information can be achieved with any of several monopulse beam sharpening techniques. Two such algorithms are discussed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Transformative Pathways for U.S. Industry: Unlocking American Innovation

The United States (U.S.) is undergoing an energy transformation that will depend on continued U.S. innovation. Although U.S. industry has been foundational to the nation’s economic growth and prosperity, it has also given rise to decades’ worth of industrial pollutants in our air and water, which acutely impact the most vulnerable communities, as well as greenhouse gas (GHG) emissions contributing to climate risk. At the same time, U.S. industry is facing growing competitive pressures. Global investors and financial regulations are increasingly focusing on emissions footprints, governments are developing emissions-based trade adjustments and procurement specifications, and downstream demand for low-carbon products is emerging. Developing cost-competitive solutions to meet these needs provides an opportunity to fundamentally transform U.S. industry and sharpen its competitive edge, while reducing the GHG emissions and adverse environmental and health impacts (see Figure ES-1). Innovation is central to this transformation. Pathways to Commercial Liftoff: Industrial Decarbonization, which provides a descriptive fact base on what is needed to reach commercial scale in the marketplace, estimates that over 60% of emissions reduction for the industrial sector will need to come from technologies that are still nascent today. This report, Transformative Pathways for U.S. Industry,3 focuses on the pathways that rely on the nascent and innovative technologies that were too early for consideration in the Pathways to Commercial Liftoff report. Targeted and sustained public and private investment in research, development, demonstration, and deployment is required to catalyze innovation and meet this moment.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Slicing Solutions for Wire Arc Additive Manufacturing

Both commercial and research applications of wire arc additive manufacturing (WAAM) have seen considerable growth in the additive manufacturing of metallic components. However, there remains a clear lack of a unified paradigm for toolpath generation when slicing parts for WAAM deposition. Existing toolpath generation options typically lack the appropriate features to account for all complexities of the WAAM process. This manuscript explores the key slicing challenges specific to toolpaths for WAAM geometry and pairs each consideration with multiple solutions to mitigate most negative effects on completed components. These challenges must be addressed to minimize voids, prevent bead collapse, and ensure deposited components accurately approximate the desired geometry. Slicing considerations are grouped into four general categories: geometric, process, thermal, and productivity. Geometric considerations are addressed with overhang compensation, corner-sharpening, and toolpath-smoothing features. Process considerations are addressed with start point configuration and controls for the bead lengths and end points. Thermal and productivity considerations are addressed with island optimization, multi-material printing, and connected insets. Finally, tools for the post-processing of generated G-code are explored. Overall, these solutions represent a critical set of slicing features used to improve generated toolpaths and the quality of the components deposited with those toolpaths.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ab Initio Molecular Dynamics Insights into Stress Corrosion Cracking and Dissolution of Metal Oxides

Oxide phases such as α-Fe2O3 (hematite) and α-Al2O3 (corundum) are highly insoluble in water; however, subcritical crack growth has been observed in humidity nonetheless. Chemically induced bond breaking at the crack tip appears unlikely due to sterically hindered molecular transport. The molecular mechanics of a crack in corundum with a reactive force field reveal minimal lattice trapping, leading to bond breaking before sufficient space opens for water transport. To address this, we model a pre-built blunt crack with space for H2O molecule adsorption at the tip and show that it reduces fracture toughness by lowering the critical J-integral. Then, we explore stress-enhanced dissolution to understand the mechanism of crack tip blunting in the oxide/water system. Density functional theory combined with metadynamics was employed to describe atomic dissolution from flat hematite and corundum surfaces in pure water. Strain accelerates dissolution, stabilizing intermediate states with broken bonds before full atom detachment, while the free energy profile of unstrained surfaces is almost monotonic. The atomistic calculations provided input for a kinetic model, predicting the shape evolution of a blunt crack tip, which displays three distinct regimes: (i) dissolution primarily away from the tip, (ii) enhanced blunting near but not at the apex, and (iii) sharpening near the apex. The transition between regimes occurs at a low strain, highlighting the critical role of water in the subcritical crack growth of oxide scales, with dissolution as the fundamental microscopic mechanism behind this process.

Chemistry↗
NASA NTRS1972

Fatigue experience from tests carried out with forged beam and frame structures in the development of the Saab aircraft Viggen

A part of the lower side of the main wing at the joint of the main spar with the fuselage frame was investigated. This wing beam area was simulated by a test specimen consisting of a spar boom of AZ 74 forging (7075 aluminum alloy modified with 0.3 percent Ag) and a portion of a honeycomb sandwich panel attached to the boom flange with steel bolts. The cross section was reduced to half scale. However, the flange thickness, the panel height, and the bolt size were full scale. Further, left and right portions of the fuselage frame intended to carry over the bending moment of the main wing were tested. Each of these frame halves consisted of a forward and a rear forging (7079 aluminum alloy, overaged) connected by an outer and inner skin (Alclad 7075) creating a box beam. These test specimens were full scale and were constructed principally of ordinary aircraft components. The test load spectrum was common to both types of specimens with regard to percentage levels. It consisted of maneuver and gust loads, touchdown loads, and loads due to ground roughness. A load history of 200 hours of flight with 15,000 load cycles was punched on a tape. The loads were randomized in groups according to the flight-by-flight principle. The highest positive load level was 90 percent of limit load and the largest negative load was -27 percent. A total of 20 load levels were used. Both types of specimens were provided with strain gages and had a nominal stress of about 300 MN/sq m in some local areas. As a result of the tests, steps were taken to reduce the risk of fatigue damage in aircraft. Thus stress levels were lowered, radii were increased, and demands on surface finish were sharpened.

Larsson, S. E.↗
NASA NTRS1972

The Lyman-alpha image of comet Tago-Sato-Kosaka /1969g/.

An f/2 objective-grating spectrograph aboard an Aerobee rocket recorded a faint image of Comet Tago-Sato-Kosaka (1969g) in L-alpha emission. Some sharpening of the image and reduction of film grain noise was accomplished by multiplying the picture's Fourier transform by an optimum filter function. After this processing, which was carried out digitally, the L-alpha comet image appeared as a nearly circularly symmetric diffuse glow approximately 800,000 km in diameter. There was also the suggestion of a faintly visible core of emission whose dimensions are less than 100,000 km. The sublimation of ice in the nucleus of the comet and the subsequent dissociation of the free water molecules by sunlight could produce a large cloud of hydrogen atoms around the comet. Resonant reradiation of solar L-alpha emission by this cloud is probably responsible for the most of the observed emission.

Jenkins, E. B.↗
NASA NTRS1973

Image enhancement by holography.

The speed of the holographic image deblurring method has recently been further enhanced by a new speed in the realization of the powerful holographic image-deblurring filter. The filter makes it possible to carry out the deblurring, in the optical computer used, in times of the order of one second. The experimental achievements using the holographic image-enhancement method are illustrated with examples ranging from out-of-focus or motion-blurred photographs, including 'amateur' photos recorded on Polaroid film, to the sharpening of the best available electron micrographs of viruses. Images recorded with X-rays, notably from rocket-borne photos of the sun, and out-of-focus photographs from cameras in NASA satellites have been similarly deblurred.

Stroke, G. W.↗
NASA NTRS1973

Acoustic emission testing of 12-nickel maraging steel pressure vessels

Acoustic emission data were obtained from three point bend fracture toughness specimens of 12-nickel maraging steel, and two pressure vessels of the same material. One of the pressure vessels contained a prefabricated flaw which was extended and sharpened by fatigue cycling. It is shown that the flawed vessel had similar characteristics to the fracture specimens, thereby allowing estimates to be made of its nearness to failure during a proof test. Both the flawed and unflawed pressure vessel survived the proof pressure and 5 cycles to the working pressure, but it was apparent from the acoustic emission response during the proof cycle and the 5 cycles to the working pressure that the flawed vessel was very near failure. The flawed vessel did not survive a second cycle to the proof pressure before failure due to flaw extension through the wall (causing a leak).

Dunegan, H. L.↗
NASA NTRS1974

Electrophoresis in space at zero gravity

Early planning for manufacturing operations in space include the use of electrophoresis for purification and separation of biological materials. Greatly simplified electrophoresis apparatus have been flown in the Apollo 14 and 16 missions to test the possibility of stable liquid systems in orbit. Additionally, isoelectric focusing and isotachophoresis are of particular interest as they offer very high resolution and have self-sharpening boundaries. The value of possible space electrophoresis is substantial. For example, present technology permits large fractionation of only a few of blood proteins many fractions, and separated cell populations are needed for research.

Bier, M.↗
NASA NTRS1974

Vestibular ataxia and its measurement in man

Methods involved in and results obtained with a new comprehensive ataxia test battery are described, and definitions of spontaneous and induced vestibular ataxia in man are given in terms of these findings. In addition, the topic of alcohol-induced ataxia in relation to labyrinth function is investigated. Items in the test battery comprise a sharpened Romberg test, in which the subject stands on the floor with eyes closed and arms folded against his chest, feet heel-to-toe, for 60 seconds; an eyes-open walking test; an eyes-open standing test; an eyes-closed standing test; an eyes-closed on-leg standing test; an eyes-closed walk a line test; an eyes-closed heel-to-toe walking test; and supplementary ataxia tests such as the classical Romberg test.

Fregly, A. R.↗
NASA NTRS1976

An eight-neighbor filter for LARSYS

An eight-neighbor filter was developed for the LARSYS program. It is used in cleaning zones and sharpening boundaries during the digitization of hand-painted zone maps, in making computer-based vegetation zones more homogeneous, and in classification of natural images, such as LANDSAT or other multispectral imagery.

Boston, S.↗
NASA NTRS1976

Agreste programme. Part 2: French test sites

The author has identified the following significant results. Results show that the available timber is decreasing after 1980. This comes from the corn extension program. Timber volume evaluations are given by biometrical connections between the mean surface of poplar crowns in a plantation and the mean circumference of the same trees taken at 1.30 m. LANDSAT imagery was found sufficient for large field discrimination, but small parcels like market-gardens are not discernible. Discrete operators were used to smooth, sharpen, or detect edges of digital pictures.

Flouzat, G.↗
NASA NTRS1976

Analog enhancement of radiographic images

The paper shows how analog methods for edge sharpening, contrast enhancement, and expansion of the range of gray levels of particular interest are effective for easy on-line application to video viewing of X-ray roentgenograms or to fluoroscopy. The technique for analog enhancement of radiographic images is a modified version of the system designed by Fuchs et al. (1972), whereby an all directional second derivative signal called detail signal is used to produce both vertical and horizontal enhancement of the image. Particular attention is given to noise filtration and contrast enhancement. Numerous radiographs supplement the text.

Baily, N. A.↗
NASA NTRS1977

Transequatorial loops interconnecting McMath regions 12472 and 12474

The paper reviews the life history of one transequatorial loop in a system observed in soft X-rays for at least 1.5 days and which interconnected a newly born active region with an old region. The birth of the selected loop is discussed along with properties of the interconnected active regions, sharpening and brightening of the loop, decay of the loop system, and physical relations between the interconnected regions. It is concluded that: (1) the loop was most probably born via reconnection of magnetic-field lines extending from the two active regions toward the equator, which occurred later than 33 hr after the younger region was born; (2) the fully developed interconnection was composed of several loops, all of which appeared to be rooted in a spotless magnetic hill of preceding northern polarity but were spread over two separate spotty regions of southern polarity in the magnetically complex new region; (3) the loop electron temperature increased from 2.1 million to 3.1 million K in one to three hours when the loop system brightened; and (4) the loops became twisted during the brightening, possibly due to their rise in the corona while remaining rooted in moving magnetic features in the younger region.

Svestka, Z.↗
NASA NTRS1977

Report on the lunar ranging at McDonald Observatory

Range measurements to an accuracy of 5 cm were achieved following improvements in the laser oscillator configuration and the photomultiplier system. Modifications to the laser include a redesigned pockel cell mount to eliminate stressing of the cell crystal; an improved electrically triggered spark gap for sharpening the electrical pulse; the use of a brewster plate in the cavity to eliminate pre-pulsing; improved alignment for the oscillator system; and increased cavity lifetime through thin film polarizer technology. Laser calibration data are presented along with the lunar laser operations log for June to October 1977.

Silverberg, E. C.↗
NASA NTRS1978

Digital enhancement of computerized axial tomograms

A systematic evaluation was conducted of certain digital image enhancement techniques performed in image space. Three types of images were used, computer generated phantoms, tomograms of a synthetic phantom, and axial tomograms of human anatomy containing images of lesions, artificially introduced into the tomograms. Several types of smoothing, sharpening, and histogram modification were explored. It was concluded that the most useful enhancement techniques are a selective smoothing of singular picture elements, combined with contrast manipulation. The most useful tool in applying these techniques is the gray-scale histogram.

Roberts, E., Jr.↗
NASA NTRS1977

Observations of nonradial p-mode oscillations on the sun

Observations of the solar velocity field with a diode array attached to the echelle spectrograph of a vacuum tower telescope are described which resolve the solar five-minute oscillatory motion into distinct bands of power. Previous observations are discussed which show that the solar five-minute oscillations can be resolved into frequencies having the character of nonradial p-mode eigenfrequencies of the solar envelope. The present observations confirm the observed frequencies and sharpen the previous resolution of the five-minute oscillations into ridges on the (wavenumber, frequency) plane. A comparison with earlier calculations indicates that the theoretical frequencies are in good but not perfect agreement with those observed. It is concluded that the identification of the five-minute oscillations as nonradial p-mode oscillations in the solar envelope is established beyond doubt.

Rhodes, E. J., Jr.↗
NASA NTRS1978

The artificial compression method for computation of shocks and contact discontinuities. III - Self-adjusting hybrid schemes

This paper presents a new computational method for the calculation of discontinuous solutions of hyperbolic systems of conservation laws, which deal effectively with both shock and contact discontinuities. The method consists of two stages: in the first stage a standard finite-difference scheme is hybridized with a nonoscillatory first order accurate method to provide for the monotonic variation of the solution near discontinuities, and in the second stage artificial compression is applied to sharpen transitions at discontinuities. This modification of a standard finite-difference method results in a scheme which preserves the order of truncation error of the original method and yet yields a sharp and oscillation free transition for both shocks and contact discontinuities. The modification can be easily implemented in existing computer codes.

Harten, A.↗