Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape Matching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

A Coupled Approach for Structural Damage Detection with Incomplete Measurements

This historical work couples model order reduction, damage detection, dynamic residual/mode shape expansion, and damage extent estimation to overcome the incomplete measurements problem by using an appropriate undamaged structural model. A contribution of this work is the development of a process to estimate the full dynamic residuals using the columns of a spring connectivity matrix obtained by disassembling the structural stiffness matrix. Another contribution is the extension of an eigenvector filtering procedure to produce full-order mode shapes that more closely match the measured active partition of the mode shapes using a set of modified Ritz vectors. The full dynamic residuals and full mode shapes are used as inputs to the minimum rank perturbation theory to provide an estimate of damage location and extent. The issues associated with this process are also discussed as drivers of near-term development activities to understand and improve this approach.

James, George↗
NASA NTRS2010

Beam Shaping for CARS Measurements in Turbulent Environments

This paper describes a new technique to mitigate the effect of beam steering on CARS measurements in turbulent, variable density environments. The new approach combines Planar BOXCARS phase-matching with elliptical shaping of one of the beams to generate a signal insensitive to beam steering, while keeping the same spatial resolution. Numerical and experimental results are provided to demonstrate the effectiveness of this approach. One set of experiments investigated the effect of beam shaping in the presence of a controlled and well quantified displacement of the beams at the focal plane. Another set of experiments, more qualitative, proved the effectiveness of the technique in the presence of severe beam steering due to turbulence.

Magnotti, Gaetano↗
NASA NTRS1998

The Application of Reflected GPS Signals to Ocean Remote Sensing

The L-band broadcast signal from the Global Positioning System (GPS) which has reflected off of the sea surface is under study for use as a ocean, coastal and wetlands remote sensing tool. The reflected signal from a given GPS satellite is cross-correlated with the pseudorandom noise code uniquely identifying that satellite. The shape of this cross-correlation, ordinarily a very sharp triangle when tracking a direct line of sight signal, becomes wider and smoother as the mean square slope of the reflecting surface increases. It is proposed that the surface wind speed can be determined by matching the recorded shape of this cross-correlation to that predicted by theoretical models as a function of wind speed and direction. The significance of these effects increases with altitude of the receiver. Experimental data have been collected using a specially modified GPS receiver on aircraft and on a balloon at altitudes of up to 25 km. These data compare favorably with predictions of analytical models and demonstrate the dependence of the waveform shape on surface wind speed and receiver altitude. The advantages that this measurement technique has over conventional scatterometers is the small size, low cost and simplicity of the receiver hardware, no requirement for a transmitter, and the ability to simultaneously collect data from usually 10 or more points (from a low earth orbiting satellite). This number could if the Russian GLONASS (Global Navigation Satellite System) satellites are also considered as additional sources of radiation. Furthermore, the bistatic scattering geometry is complementary to the backscatter used by conventional scatterometers.

Garrison, James L.↗
DOE OSTI2020

Updraft and Downdraft Core Size and Intensity as Revealed by Radar Wind Profilers: MCS Observations and Idealized Model Comparisons

This study explores the updraft and downdraft properties of mature stage mesoscale convective systems (MCSs) in terms of draft core width, shape, intensity, and mass flux characteristics. The observations use extended radar wind profiler (RWP) and surveillance radar datasets from the U.S. Department of Energy Atmospheric Radiation Measurement program for midlatitude (Oklahoma, USA) and tropical (Amazon, Brazil) sites. MCS drafts behave qualitatively similar to previous aircraft and RWP cloud summaries. The Oklahoma MCSs indicate larger and more intense convective up- and downdraft cores, and greater mass flux than Amazon MCS counterparts. However, similar size-intensity relationships and draft vertical profile behaviors are observed for both regions. Additional similarities include weak positive correlations between core intensity and core width (correlation coefficient r ~ 0.5), and increases in draft intensity with altitude. A model-observational intercomparison for draft properties (core width, intensity, mass flux) is also performed to illustrate the potential usefulness of statistical observed draft characterizations. Idealized simulations with the Weather Research and Forecasting model aligned with midlatitude MCS conditions are performed at model grid spacings (?x) that range from 4 km to 250 m. It is shown that the simulations performed at ?x = 250 m at similar mature MCS lifecycle stages are those that exhibit draft intensity, width, mass flux, and shape parameter performances best matching with observed properties.

radar, arm, wind profiler, goamazon↗
DOE OSTI2024

Boundary of the Distribution of Solar Wind Proton Beta versus Temperature Anisotropy

Abstract The frequency distribution of solar wind protons, measured in the vicinity of Earth’s orbit, is customarily plotted in ( β ∥ , T ⊥ / T ∥ ) phase space. Here, T ⊥ / T ∥ is the ratio of perpendicular and parallel temperatures, and β ∥ = 8 π nT ∥ / B 2 is the ratio of parallel thermal energy to background magnetic field energy, the so-called “parallel beta,” with ⊥ and ∥ denoting directions with respect to the ambient magnetic field. Such a frequency distribution, plotted as a two-dimensional histogram, forms a peculiar rhombic shape defined with an outer boundary in the said phase space. Past studies reveal that the threshold conditions for temperature anisotropy–driven plasma instability partially account for the boundary on the high- β ∥ side. The low- β ∥ side remains largely unexplained despite some efforts. Work by Vafin et al. recently showed that certain contours of collisional relaxation frequency, ν pp , when parameterized by T ⊥ / T ∥ and β ∥ , could match the overall shape of the left-hand boundary, thus suggesting that the collisional relaxation process might be closely related to the formation of the left-hand boundary. The present paper extends the analysis by Vafin et al. and carries out the dynamical computation of the collisional relaxation process for an ensemble of initial proton states with varying degrees of anisotropic temperatures. The final states of the relaxed protons are shown to closely match the observed boundary to the left of the ( β ∥ , T ⊥ / T ∥ ) phase space. When coupled with a similar set of calculations for the ensemble in the collective instability regime, it is found that the combined collisional/collective effects provide the baseline explanation for the observation.

Astronomy & Astrophysics↗
NASA NTRS2009

Updating the Finite Element Model of the Aerostructures Test Wing Using Ground Vibration Test Data

Improved and/or accelerated decision making is a crucial step during flutter certification processes. Unfortunately, most finite element structural dynamics models have uncertainties associated with model validity. Tuning the finite element model using measured data to minimize the model uncertainties is a challenging task in the area of structural dynamics. The model tuning process requires not only satisfactory correlations between analytical and experimental results, but also the retention of the mass and stiffness properties of the structures. Minimizing the difference between analytical and experimental results is a type of optimization problem. By utilizing the multidisciplinary design, analysis, and optimization (MDAO) tool in order to optimize the objective function and constraints; the mass properties, the natural frequencies, and the mode shapes can be matched to the target data to retain the mass matrix orthogonality. This approach has been applied to minimize the model uncertainties for the structural dynamics model of the aerostructures test wing (ATW), which was designed and tested at the National Aeronautics and Space Administration Dryden Flight Research Center (Edwards, California). This study has shown that natural frequencies and corresponding mode shapes from the updated finite element model have excellent agreement with corresponding measured data.

Lung, Shun-Fat↗
NASA NTRS2009

Updating the Finite Element Model of the Aerostructures Test Wing using Ground Vibration Test Data

Improved and/or accelerated decision making is a crucial step during flutter certification processes. Unfortunately, most finite element structural dynamics models have uncertainties associated with model validity. Tuning the finite element model using measured data to minimize the model uncertainties is a challenging task in the area of structural dynamics. The model tuning process requires not only satisfactory correlations between analytical and experimental results, but also the retention of the mass and stiffness properties of the structures. Minimizing the difference between analytical and experimental results is a type of optimization problem. By utilizing the multidisciplinary design, analysis, and optimization (MDAO) tool in order to optimize the objective function and constraints; the mass properties, the natural frequencies, and the mode shapes can be matched to the target data to retain the mass matrix orthogonality. This approach has been applied to minimize the model uncertainties for the structural dynamics model of the Aerostructures Test Wing (ATW), which was designed and tested at the National Aeronautics and Space Administration (NASA) Dryden Flight Research Center (DFRC) (Edwards, California). This study has shown that natural frequencies and corresponding mode shapes from the updated finite element model have excellent agreement with corresponding measured data.

Lung, Shun-fat↗
NASA NTRS2013

Airborne Measurements of CO2 Column Concentration and Range Using a Pulsed Direct-Detection IPDA Lidar

We have previously demonstrated a pulsed direct detection IPDA lidar to measure range and the column concentration of atmospheric CO2. The lidar measures the atmospheric backscatter profiles and samples the shape of the 1,572.33 nm CO2 absorption line. We participated in the ASCENDS science flights on the NASA DC-8 aircraft during August 2011 and report here lidar measurements made on four flights over a variety of surface and cloud conditions near the US. These included over a stratus cloud deck over the Pacific Ocean, to a dry lake bed surrounded by mountains in Nevada, to a desert area with a coal-fired power plant, and from the Rocky Mountains to Iowa, with segments with both cumulus and cirrus clouds. Most flights were to altitudes >12 km and had 5-6 altitude steps. Analyses show the retrievals of lidar range, CO2 column absorption, and CO2 mixing ratio worked well when measuring over topography with rapidly changing height and reflectivity, through thin clouds, between cumulus clouds, and to stratus cloud tops. The retrievals shows the decrease in column CO2 due to growing vegetation when flying over Iowa cropland as well as a sudden increase in CO2 concentration near a coal-fired power plant. For regions where the CO2 concentration was relatively constant, the measured CO2 absorption lineshape (averaged for 50 s) matched the predicted shapes to better than 1% RMS error. For 10 s averaging, the scatter in the retrievals was typically 2-3 ppm and was limited by the received signal photon count. Retrievals were made using atmospheric parameters from both an atmospheric model and from in situ temperature and pressure from the aircraft. The retrievals had no free parameters and did not use empirical adjustments, and >70% of the measurements passed screening and were used in analysis. The differences between the lidar-measured retrievals and in situ measured average CO2 column concentrations were <1.4 ppm for flight measurement altitudes >6 km.

Lidar↗
DOE OSTI2021

A practical extension of the recursive multi-fidelity model for the emulation of hole closure experiments

We report in regimes of high strain rate, the strength of materials often cannot be measured directly in experiments. Instead, the strength is inferred based on an experimental observable, such as a change in shape, that is matched by simulations supported by a known strength model. In hole closure experiments, the rate and degree to which a central hole in a plate of material closes during a dynamic loading event are used to infer material strength parameters. Due to the complexity of the experiment, many computationally expensive, three-dimensional simulations are necessary to train an emulator for calibration or other analyses. These simulations can be run at multiple grid resolutions, where dense grids are slower but more accurate. In an effort to reduce the computational cost, a combination of simulations with different resolutions can be combined to develop an accurate emulator within a limited training time. We explore the novel design and construction of an appropriate functional recursive multi-fidelity emulator of a strength model for tantalum in hole closure experiments that can be applied to arbitrarily large training data. Hence, by formulating a multi-fidelity model to employ low-fidelity simulations, we were able to reduce the error of our emulator by approximately 81% with only an approximately 1.6% increase in computing resource utilization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of crystal structure on constitutive anisotropy of silica sand at particle-scale

In spite of recent advanced geotechnical research regarding the influence of particle-scale morphology and fabric on the constitutive behavior of silica sands, there is still no published literature that investigated the influence of crystal structure of sand particles on their constitutive behavior. The main constituent of silica sand particles is quartz mineral, which has a trigonal crystal system and hexagonal lattice. This paper investigates the influence of quartz crystal structure on the constitutive response of silica sand particles using 3D X-ray diffraction (3DXRD), synchrotron micro-computed tomography (SMT), and 3D finite element (FE) analysis. Here, unconfined uniaxial compression experiments on single particles of synthetic silica cubes exposed the notion of constitutive anisotropy caused by the crystal structure of quartz. Since the silica cubes have simple regular geometry (1 mm) 3 , they were loaded in different directions with respect to their crystal local planes. The crystal structure was also identified for a natural silica sand specimen composed of 2705 particles and loaded in confined uniaxial compression. Physical limitations of the experimental measurements made a strong case for the use of 3D FE analysis to study how the change in crystal local orientation of individual sand particles can fundamentally produce anisotropy in the constitutive response of natural sand specimens. The 3D FE analysis was validated to accurately model the crystal-based constitutive anisotropy in silica particles using the results of the silica cube experiments. The analysis was then executed on 3D FE meshes that closely matched the physical shape and fabric of the 2705 particles in the natural sand specimen. Both the experiments and 3D FE analysis showed that the crystal structure of quartz essentially causes a directional anisotropy in the constitutive behavior of silica particles.

58 GEOSCIENCES↗
DOE OSTI2021

Exploration of RMP ELM control on ITER-similar shape (ISS) in KSTAR

Recent control advances at KSTAR enabled us to not only establish but also to sustain the ITER-similar shape (ISS) in a stationary manner, matching the ITER-like dimensionless shape parameters in lower single null configuration with vastly contrasting upper/lower triangularities. Here, the kinetic parameters of the ISS are different from the typical KSTAR configurations seen in ELM-RMP suppression experiments. We experimentally demonstrate the ISS-compatible resonant magnetic perturbation (RMP) control in KSTAR for the first time, using the n = 2, +90 degrees phasing RMP.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Optimal filtering and generation of entangled photons for quantum applications in the presence of noise

Filtering is commonly used in quantum optics to reject noise photons, and also to enable interference between independent photons. However, filtering the joint spectrum of photon pairs can reduce the inherent coincidence probability or loss-independent heralding efficiency. Here we investigate filtering for multiphoton applications based on entanglement and interference (e.g., quantum teleportation). We multiplex C-band entangled photons and C-band classical communications into the same long-distance fibers, which enables scalable low-loss quantum networking but requires filtering of spontaneous Raman scattering noise from classical light. Using tunable-bandwidth filters, low-jitter detectors, and polarization filters, we distribute wavelength-degenerate time-bin entangled photons in the C band (1536.5 nm) over 25 km/25 km standard fibers (50 km) each carrying 10 Gbit/s C-band classical data signals. Narrow filtering enables milliwatt-level C-band power, which exceeds the power achieved by comparable studies by roughly an order of magnitude and could feasibly support terabit per second classical rates. We evaluate how performance depends on pump and filter bandwidths, multipair emission, filter shapes, loss, phase matching, and how quantum information is measured. We find a trade-off between reducing noise impact and increasing single-mode purity, and discuss mitigation methods toward optimal multiphoton applications. Importantly, these results apply to noise in free space and in quantum devices (sources, frequency converters, switches, detectors, etc.) and provide insight into filter-induced degradation of single-photon purity and rates even in noise-free environments.

Thomas, Jordan M. [Fermilab; Northwestern U.]↗
DOE OSTI2023

Extend an innovative HPC-Compatible Multiple Temporal-spatial Resolution Concurrent Finite Element Modeling Approach to Guide Laser Powder Bed Fusion Additive

Laser power bed fusing (PBF) additive manufacturing is a key enabling technology to manufacture highly complex and integrated automotive structures. However, the geometric complexity of PBF-AM technique also leads to highly non-uniform heating and cooling rate in the manufactured part, which may cause flaw formation and produce excessive and nonuniform residual stresses, which increase quality uncertainties and manufacture issues, leading to increases in cost and energy consumption in the form of rejected parts. In this research project, we developed an innovative Multi-Spatial-Temporal-Resolution Finite Element (MUST-FE) method and completed the corresponding high performance computation (HPC) platform-based in-house code, which enables high accuracy prediction of temperature and residual stress fields for component-scale PBF-AM manufacture in efficient computation time. The MUST-FE model is calibrated and validated with a “2D pad” AlSi10Mg experiments by matching the melt pool shape and dimension, and with a “XY-cross” AlSi10Mg experiment by matching the thermal distortion and residual stress. The innovative multi-resolution and concurrent modeling approach adopted in this code ensures accuracy and computational efficiency, which will enable energy-efficient and high-yield, low-cost manufacturing of optimized, qualifiable automotive structures and contribute towards reaching technical targets outlined in AMO’s Program Plan to develop additive manufacturing systems that deliver consistently reliable parts with predictable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Implementation of a 9-point stencil in SOLPS-ITER and implications for Alcator C-Mod divertor plasma simulations

The SOLPS-ITER code suite is used worldwide for plasma edge modeling, the interpretation of experiments, as well as for the design of the ITER divertor. The numerical scheme of the plasma solver of the code, B2.5, is based on the assumption of perfectly field-aligned grids, while in practice grids are often strongly distorted to match divertor target shapes. Neglecting these grid distortion leads to qualitatively and quantitatively incorrect results for fluid neutral simulations, and may affect results in cold (detached) divertors even when using kinetic neutral simulations. In this contribution, we present the first results of a newly implemented 9-point stencil in B2.5 to properly handle misaligned grids. The new scheme is then applied to fluid neutral simulations of a well-diagnosed and previously modeled Alcator C-Mod discharge. Results are compared with the original 5-point scheme neglecting grid distortion effects, as well as with simulations including a full kinetic neutral model. We conclude that the 9-point stencil is essential to correctly model the transport of fluid neutrals on distorted grids, and to capture the effects of divertor closure on the fluid neutral behavior.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1974

Feasibility study of the transonic biplane concept for transport aircraft application

Investigations were conducted to evaluate the feasibility of a transonic biplane consisting of a forward-mounted swept-back lower wing, a rear-mounted swept-forward upper wing, and a vertical fin connecting the wings at their tips. This wing arrangement results in significant reductions in induced drag relative to a monoplane designed with the same span, and it allows for a constant-section fuselage shape while closely matching an ideal area distribution curve for M = 0.95 cruise. However, no significant reductions in ramp weight were achieved for the biplane relative to a monoplane with the same mission capability. Flutter analyses of the biplane revealed both symmetric and antisymmetric instabilities that occur well below the required flutter speed. Further studies will be required to determine if acceptable flutter speeds can be achieved through the elimination of the instabilities by passive means or by active controls. Configurations designed for other missions, especially those with lower Mach numbers and lower dynamic pressures, should be examined since the geometries suitable for those design constraints might avoid the weight penalties and flutter instabilities which prevent exploitation of induced drag benefits for the configuration studied.

Lange, R. H.↗
NASA NTRS1984

Beam structure of Jupiter's decametric radiation

Data from concurrent Voyager and earth-based observations demonstrate that the Jovian source A radio emissions are not correlated with Io's position and have a distinct cross-sectional shape. The recordings were made simultaneously at 21.811 and 21.860 MHz in 1979. Voyager 1 and ground-data exhibited 13 highly correlated storms, unlike the Io-B events. Correlations were also identified among storms measured by both spacecraft and the ground station. Start and end times and flux densities for the highly correlated storms were used to calculate the projected beam shape. The data matched predictions of a model of a storm emission beam envelope in the form of a curved sheet that corotates with the planet.

Maeda, K.↗
NASA NTRS1991

Microstrip antenna developments at JPL

The in-house development of microstrip antennas, initiated in 1981, when a spaceborne lightweight and low-profile planar array was needed for a satellite communication system, is described. The work described covers the prediction of finite-ground-plane effects by the geometric theory of diffraction, higher-order-mode circularly polarized circular patch antennas, circularly polarized microstrip arrays with linearly polarized elements, an impedance-matching teardrop-shaped probe feed, a dual-polarized microstrip array with high isolation and low cross-polarization, a planar microstrip Yagi array, a microstrip reflectarray, a Ka-band MMIC array, and a series-fed linear arrays.

Huang, John↗
NASA NTRS1994

Silicates and aromatic hydrocarbons in the 10 micron spectrum of the Taurus dark cloud source Elias 1

We have obtained 10.4-12 micrometer spectra at spectral resolution R approximately equal to 190 of the Herbig Ae star Elias 1 in the Taurus dark cloud with the United Kingdom Infrared Telescope (UKIRT) CGS3 spectrometer, along with an 8-13 micrometer spectrum at R approximately equal to 55. The 11.2 micrometer emission feature matches the wavelength, shape, and full width at half maximum (FWHM) of the 11.22 micrometer aromatic hydrocarbon band, consistent with the presence of other aromatic features. A strong 11.06 micrometer feature is present, and there are two possible new emission features at 11.6 and 11.76 micrometer. The strong silicate emission feature is broader and peaks at a longer wavelength than can be reproduced with the Trapezium emissivity. Larger grains, with mean radius a approximately 1.5 micrometers appear to be required, a possible indication of grain growth around a young star.

Hanner, Martha S.↗