Results for “Shape Decomposition” — Page 4

NASA NTRS2006

Nanophase Magnetite and Pyrrhotite in ALH84001 Martian Meteorite: Evidence for an Abiotic Origin

The nanophase magnetite crystals in the black rims of pancake-shaped carbonate globules of the Martian meteorite ALH84001 have been studied extensively because of the claim by McKay et al.that they are biogenic in origin. A subpopulation of these magnetite crystals are reported to conform to a unique elongated shape called "truncated hexa-octahedral" or "THO" by Thomas-Keprta et al. They claim these THO magnetite crystals can only be produced by living bacteria thus forming a biomarker in the meteorite. In contrast, thermal decomposition of Fe-rich carbonate has been suggested as an alternate hypothesis for the elongated magnetite formation in ALH84001 carbonates. The experimental and observational evidence for the inorganic formation of nanophase magnetite and pyrrhotite in ALH84001 by decomposition of Fe-rich carbonate in the presence of pyrite are provided.

Golden, D. C.↗

NASA NTRS1986

Effects of an internal floor on low frequency sound transmission into aircraft cabins - An experimental investigation

A simplified cylindrical model of an aircraft fuselage is used to experimentally study the effects of an internal floor on low frequency sound transmission into aircraft cabins. A scaled-down lattice floor support and floor skin are designed based upon selected characteristics of a business aircraft. Thus, the model provides a simplified procedure for studying the effects of various structural modifications as well as other important effects. Modal decomposition of the shell response and the corresponding pressure response at various interior locations are presented. Results indicate that the main effect of the floor on interior pressure levels is due to modification of the interior acoustic mode shape and not due to the structural modification of the fuselage caused by the lattice floor support.

Jones, J. D.↗

NASA NTRS1975

An experimental study of jet exhaust simulation

Afterbody drag predictions for jet aircraft are usually made experimentally with the jet exhaust flow simulated. The physical gas properties of the fluid used for the model jet exhaust can affect the accuracy of simulation of the airplane's jet exhaust plume. The effect of the accuracy of this simulation on afterbody drag was investigated by wind-tunnel tests with single engine model. In addition to unheated air as the exhaust gas, the decomposition products of three different concentrations of hydrogen peroxide were utilized. The air jet simulation consistently resulted in higher boattail drag than hydrogen peroxide simulation. The differences in drag for the various exhaust gases are attributed to different plume shapes and entrainment properties of the gases. The largest differences in drag due to exhaust gas properties were obtained for the combination of high transonic Mach numbers and high boattail angles. For these conditions, the current data indicate that the use of air to simulate a nonafterburning turbojet exhaust can result in an increase in afterbody amounting to 20 percent of the nonafterburning turbojet value.

Compton, W. B., III↗

NASA NTRS2008

Flow Solver for Incompressible Rectangular Domains

This is an extension of the Flow Solver for Incompressible 2-D Drive Cavity software described in the preceding article. It solves the Navier-Stokes equations for incompressible flow using finite differencing on a uniform, staggered grid. There is a runtime choice of either central differencing or modified upwinding for the convective term. The domain must be rectangular, but may have a rectangular walled region within it. Currently, the position of the interior region and exterior boundary conditions are changed by modifying parameters in the code and recompiling. These features make it possible to solve a variety of classical fluid flow problems such as an L-shaped cavity, channel flow, or wake flow past a square cylinder. The code uses fourth-order Runge-Kutta time-stepping and overall second-order spatial accuracy. This software permits the walled region to be positioned such that flow past a square cylinder, an L-shaped cavity, and the flow over a back-facing step can all be solved by reconfiguration. Also, this extension has an automatic detection of periodicity, as well as use of specialized data structure for ease of configuring domain decomposition and computing convergence in overlap regions.

Kalb, Virginia L.↗

NASA NTRS1999

Data Structure and Parallel Decomposition Considerations on a Fibonacci Grid

The Fibonacci grid, proposed by Swinbank and Purser (see companion abstract), provides attractive properties for global numerical atmospheric prediction by offering an optimally homogeneous, geometrically regular, and approximately isotropic discretization, with only the polar regions requiring special numerical treatment. It is a mathematical idealization, applied to the sphere, of the multi-spiral patterns often found in botanical structures, such as in pine cones and sunflower heads. Computationally, it is natural to organize the domain, into zones, in each of which the same pair, or triple, of "Fibonacci spirals" dominate. But the further subdivision of such zones into "tiles" of a shape and size suitable for distribution to the processors of a massively parallel computer requires very careful consideration if the subsequent spatial computations along the respective spirals, especially those computations (such as compact differencing schemes) that involve recursion, can be implemented in an efficient "load-balanced "manner without requiring excessive amounts of inter-processor communications. In this paper we show how certain "number theoretic" properties of the Fibonacci sequence (whose numbers prescribe the multiplicity of successive spirals) may be exploited in the decomposition of grid zones into tidy arrangements of triangular grid tiles, each tile possessing one side approximately parallel to the constant-latitude zone boundary. We also describe how the spatially recursive processes may be decomposed across such a tiling, and the directionality of the recursions reversed on alternate grid lines, to ensure a very high degree of load balancing throughout the execution of the computations required for one time step of a global model.

Michalakes, John↗

NASA NTRS1997

Inorganic Water Repellent Coatings for Thermal Protection Insulation on an Aerospace Vehicle

The objective of this research was two-fold: first, to identify and test inorganic water-repellent materials that would be hydrophobic even after thermal cycling to temperatures above 600 C and, second, to develop a model that would link hydrophobicity of a material to the chemical properties of its constituent atoms. Four different materials were selected for detailed experimental study, namely, boron nitride, talc, molybdenite, and pyrophyllite, all of which have a layered structure made up of ionic/covalent bonds within the layers but with van der Waals bonds between the layers. The materials tested could be considered hydrophobic for a nonporous surface but none of the observed contact angles exceeded the necessary 90 degrees required for water repellency of porous materials. Boron nitride and talc were observed to retain their water-repellency when heated in air to temperatures that did not exceed 800 C, and molybdenite was found to be retain its hydrophobicity when heated to temperatures up to 600 C. For these three materials, oxidation and decomposition were identified to be the main cause for the breakdown of water repellency after repeated thermal cycling. Pyrophyllite shows the maximum promise as a potential water-repellent inorganic material, which, when treated initially at 900 C, retained its shape and remained hydrophobic for two thermal cycles where the maximum retreatment temperature is 900 C. A model was developed for predicting materials that might exhibit hydrophobicity by linking two chemical properties, namely, that the constituent ions of the compound belong to the soft acid-base category and that the fractional ionic character of the bonds be less than about 20 percent.

Fuerstenau, D. W.↗

NASA NTRS1997

Inorganic Water Repellent Coatings for Thermal Protection Insulation on an Aerospace Vehicle

The objective of this research was two-fold: first, to identify and test inorganic water-repellent materials that would be hydrophobic even after thermal cycling to temperatures above 600 C and, second, to develop a model that would link hydrophobicity of a material to the chemical properties of its constituent atoms. Four different materials were selected for detailed experimental study, namely, boron nitride, talc, molybdenite, and pyrophyllite, all of which have a layered structure made up of ionic/covalent bonds within the layers but with van der Waals bonds between the layers. The materials tested could be considered hydrophobic for a nonporous surface but none of the observed contact angles exceeded the necessary 90 degrees required for water repellency of porous materials. Boron nitride and talc were observed to retain their water-repellency when heated in air to temperatures that did not exceed 800 C, and molybdenite was found to be retain its hydrophobicity when heated to temperatures up to 600 C. For these three materials, oxidation and decomposition were identified to be the main cause for the breakdown of water repellency after repeated thermal cycling. Pyrophyllite shows the maximum promise as a potential water-repellent inorganic material, which, when treated initially at 900 C, retained its shape and remained hydrophobic for two thermal cycles where the maximum retreatment temperature is 900 C. A model was developed for predicting materials that might exhibit hydrophobicity by linking two chemical properties, namely, that the constituent ions of the compound belong to the soft acid-base category and that the fractional ionic character of the bonds be less than about 20 percent.

Fuerstenau, D. W.↗

NASA NTRS1991

Domain-decomposed preconditionings for transport operators

The performance was tested of five different interface preconditionings for domain decomposed convection diffusion problems, including a novel one known as the spectral probe, while varying mesh parameters, Reynolds number, ratio of subdomain diffusion coefficients, and domain aspect ratio. The preconditioners are representative of the range of practically computable possibilities that have appeared in the domain decomposition literature for the treatment of nonoverlapping subdomains. It is shown that through a large number of numerical examples that no single preconditioner can be considered uniformly superior or uniformly inferior to the rest, but that knowledge of particulars, including the shape and strength of the convection, is important in selecting among them in a given problem.

Chan, Tony F.↗

NASA NTRS1974

Metallographic study of metallic fragment of lunar surface material

A high precision investigation of a metallic fragment from the lunar material returned by the Soviet Luna 16 automatic station revealed three characteristic temperature intervals with different kinetics of solid solution decomposition. The following were found in the structure of the iron-nickel-cobalt alloy: (1) delta-phase and alpha-ferrite of diffusional, displacement origin in the grain boundary and acicular forms; and (2) martensite of isothermal and athermal nature, acicular, lamellar, massive, and dendritic. The diversity of the shapes of structural constituents is associated with the effect on their formation of elastic distortions and various mechanisms of deformation relaxation processes.

Mints, R. I.↗

NASA NTRS1983

Refinement and application of acoustic impulse technique to study nozzle transmission characteristics

An improved acoustic impulse technique was developed and was used to study the transmission characteristics of duct/nozzle systems. To accomplish the above objective, various problems associated with the existing spark-discharge impulse technique were first studied. These included (1) the nonlinear behavior of high intensity pulses, (2) the contamination of the signal with flow noise, (3) low signal-to-noise ratio at high exhaust velocities, and (4) the inability to control or shape the signal generated by the source, specially when multiple spark points were used as the source. The first step to resolve these problems was the replacement of the spark-discharge source with electroacoustic driver(s). These included (1) synthesizing on acoustic impulse with acoustic driver(s) to control and shape the output signal, (2) time domain signal averaging to remove flow noise from the contaminated signal, (3) signal editing to remove unwanted portions of the time history, (4) spectral averaging, and (5) numerical smoothing. The acoustic power measurement technique was improved by taking multiple induct measurements and by a modal decomposition process to account for the contribution of higher order modes in the power computation. The improved acoustic impulse technique was then validated by comparing the results derived by an impedance tube method. The mechanism of acoustic power loss, that occurs when sound is transmitted through nozzle terminations, was investigated. Finally, the refined impulse technique was applied to obtain more accurate results for the acoustic transmission characteristics of a conical nozzle and a multi-lobe multi-tube supressor nozzle.

Salikuddin, M.↗

NASA NTRS1990

Using Strassen's algorithm to accelerate the solution of linear systems

Strassen's algorithm for fast matrix-matrix multiplication has been implemented for matrices of arbitrary shapes on the CRAY-2 and CRAY Y-MP supercomputers. Several techniques have been used to reduce the scratch space requirement for this algorithm while simultaneously preserving a high level of performance. When the resulting Strassen-based matrix multiply routine is combined with some routines from the new LAPACK library, LU decomposition can be performed with rates significantly higher than those achieved by conventional means. We succeeded in factoring a 2048 x 2048 matrix on the CRAY Y-MP at a rate equivalent to 325 MFLOPS.

Bailey, David H.↗

NASA NTRS1998

Computer Simulation of the far Infrared Collision Induced Absorption Spectra of Gaseous CO2

Far infrared collision induced absorption spectra of gaseous CO2 were computed using molecular dynamics simulations. The quadrupole and hexadecapole multipolar induction, through the trace, and the anisotropy of the molecular polarizability were found to be insufficient to represent properly the dipole induction mechanism. For a detailed analysis of the induction process the spectra obtained were decomposed into components resulting from different terms of the induced dipole. Based on this decomposition, all additional overlap contribution for each term was proposed. When spectra were recomputed including such overlap, good agreement between experiment and simulation was achieved over the temperature range at which measurements exist (233-400 K). The use of an anisotropic intermolecular potential was found to be of critical importance for obtaining the right shape of the far wings of the spectra.

Gruszka, Marcin↗

NASA NTRSDate not supplied

Coherent Mode Decomposition for Kolmogorov Optical Turbulence in a Finite Aperture

An analysis of the coherent mode decomposition of an optical field after propagation through atmospheric turbulence is presented. The coherent modes represent an ideal basis by which to decompose the field for design of mode-limited optical systems. Due to rotational symmetry of the Fredholm integral operator for Kolmogorov optical turbulence, the coherent modes exhibit separable solutions classified by a radial and azimuthal mode index. The study of the coherent modes is then reduced to that of the radial functions determined by the coherence ratio and obscuration ratio. Analysis of the spectrum of eigenvalues yields sharp bounds on the efficiency of receivers using incoherent or coherent combining with mode-limited photonic devices in the presence of Kolmogorov turbulence. The effective number of modes needed to represent Kolmogorov optical turbulence is studied via the von Neumann entropy, purity, and largest eigenvalue, and the differences in the different definitions is discussed. The similarity of the coherent modes to linearly polarized (LP) fiber modes is quantified yielding a precise characterization of the maximum gain that can be achieved in mode-limited systems via mode shaping techniques. As a final application, a mode sorting technique is presented for optimally splitting power from atmospherically degraded light into a finite number of modes simultaneously maximizing total coupling efficiency and minimizing the difference in average power between channels.

free-space optical communication↗

NASA NTRS1990

Oxygen stabilization induced enhancement in J(sub c) and T(sub c) of superconducting oxides

In an attempt to enhance the electrical and mechanical properties of the high temperature superconducting oxides, high T(sub c) composites were prepared composed of the 123 compounds and AgO. The presence of extra oxygen due to the decomposition of AgO at high temperature is found to stabilize the superconducting 123 phase. Ag is found to serve as clean flux for grain growth and precipitates as pinning center. Consequently, almost two orders of magnitude enhancement in critical current densities were also observed in these composites. In addition, these composites also show much improvement in workability and shape formation. On the other hand, proper oxygen treatment of Y5Ba6Cu11Oy was found to possibly stabilize superconducting phase with T(sub c) near 250 K. I-V, ac susceptibility, and electrical resistivity measurements indicate the existence of this ultra high T(sub c) phase in this compound. Detailed structure, microstructure, electrical, magnetic and thermal studies of the superconducting composites and the ultra high T(sub c) compound are presented and discussed.

Wu, M. K.↗

NASA NTRS1991

Oxygen stabilization induced enhancement in superconducting characteristics of high-Tc oxides

In an attempt to enhance the electrical and mechanical properties of the high temperature superconducting oxides, high T(sub c) composites were prepared composed of the 123 compounds and AgO. The presence of extra oxygen due to the decomposition of AgO at high temperature is found to stabilize the superconducting 123 phase. Ag is found to serve as clean flux for grain growth and precipitates as pinning center. Consequently, almost two orders of magnitude enhancement in critical current densities were also observed in these composites. In addition, these composites also show much improvement in workability and shape formation. On the other hand, proper oxygen treatment of Y5Ba6Cu11Oy was found to possibly stabilize superconducting phase with T(sub c) near 250 K. I-V, ac susceptibility, and electrical resistivity measurements indicate the existence of this ultra high T(sub c) phase in this compound. Detailed structure, microstructure, electrical, magnetic and thermal studies of the superconducting composites and the ultra high T(sub c) compound are presented and discussed.

Wu, M. K.↗

NASA NTRSDate not supplied

Coherent Mode Decomposition for Kolmogorov Optical Turbulence in a Finite Aperture

An analysis of the coherent mode decomposition of an optical field after propagation through atmospheric turbulence is presented. The coherent modes represent an ideal basis by which to decompose the field for design of mode-limited optical systems. Using the rotational symmetry of the Fredholm integral operator for Kolmogorov optical turbulence, it is shown that the coherent modes exhibit separable solutions classified by radial and azimuthal quantum numbers. The study of the coherent modes is then reduced that of the radial functions determined by the aperture-coherence diameter ratio and obscuration ratio. Analysis of the spectrum of eigenvalues yields sharp bounds on the efficiency of receivers using incoherent or coherent combining with mode-limited photonic devices in the presence of Kolmogorov turbulence. The effective number of modes needed to represent Kolmogorov optical turbulence is studied via the von Neumann entropy, purity, and largest eigenvalue, and the differences in the different definitions is discussed. The similarity of the coherent modes to linearly polarized (LP) fiber modes is quantified yielding a precise characterization of the maximum gain that can be achieved in mode-limited systems via mode shaping techniques. As a final application, a mode sorting technique is presented for optimally splitting power from atmospherically degraded light into a finite number of modes simultaneously maximizing total coupling efficiency and minimizing the average and instantaneous power ratio between channels.

free-space optical communication↗

NASA NTRS2003

Non-Linear Structural Dynamics Characterization using a Scanning Laser Vibrometer

This paper presents the use of a scanning laser vibrometer and a signal decomposition method to characterize non-linear dynamics of highly flexible structures. A Polytec PI PSV-200 scanning laser vibrometer is used to measure transverse velocities of points on a structure subjected to a harmonic excitation. Velocity profiles at different times are constructed using the measured velocities, and then each velocity profile is decomposed using the first four linear mode shapes and a least-squares curve-fitting method. From the variations of the obtained modal \ielocities with time we search for possible non-linear phenomena. A cantilevered titanium alloy beam subjected to harmonic base-excitations around the second. third, and fourth natural frequencies are examined in detail. Influences of the fixture mass. gravity. mass centers of mode shapes. and non-linearities are evaluated. Geometrically exact equations governing the planar, harmonic large-amplitude vibrations of beams are solved for operational deflection shapes using the multiple shooting method. Experimental results show the existence of 1:3 and 1:2:3 external and internal resonances. energy transfer from high-frequency modes to the first mode. and amplitude- and phase- modulation among several modes. Moreover, the existence of non-linear normal modes is found to be questionable.

Pai, P. F.↗

NASA NTRS1998

Effects of Suction on Swept-Wing Transition

Stability experiments are conducted in the Arizona State University Unsteady Wind Tunnel on a 45 deg swept airfoil. The pressure gradient is designed to provide purely crossflow-dominated transition; that is, the boundary layer is subcritical to Tollmien-Schlichting disturbances. The airfoil surface is hand polished to a 0.25 microns rms finish. Under these conditions, stationary crossflow disturbances grow to nonuniform amplitude due to submicron surface irregularities near the leading edge. Uniform stationary crossflow waves are produced by controlling the initial conditions with spanwise arrays of micron-sized roughness elements near the attachment line. Hot-wire measurements provide detailed maps of the crossflow wave structure, and accurate spectral decompositions isolate individual-mode growth rates for the fundamental and harmonic disturbances. Roughness spacing, roughness height, and Reynolds number are varied to investigate the growth of all amplified wavelengths. The measurements show early nonlinear mode interaction causing amplitude saturation well before transition. Comparisons with nonlinear parabolized stability equations calculations show excellent agreement in both the disturbance amplitude and the mode-shape profiles.

Saric, William S.↗