AAAR 2014 Annual Conference October 20-24, 2014 AAAR 33rd Annual Conference Rosen Shingle Creek Orlando, Florida, USA
Request to the US DOE for the AAAR 33rd Annual Conference Symposia Sponsorship
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Request to the US DOE for the AAAR 33rd Annual Conference Symposia Sponsorship
This issue contains papers from the Eighteenth Symposium on Separation Science and Technology for Energy Applications, held in Oak Ridge, Tennessee on October 27-30, 2014. Symposia in this series are aimed at bringing together practitioners in diverse fields related to separations to exchange knowledge, both within and among their specialties, on topics related to energy production and conservation. Meetings are typically scheduled every two years and attract over 100 international participants.
Conference presentation for WM2022 Symposia. Presentation is very similar to presentation just submitted entitled 'Updated Waste Management System Analysis Tool Requirements and Enhancements'
The DOE Office of Environmental Management (DOE-EM) oversees one of the largest and most technically challenging cleanup programs in the world. The mission of DOE-EM is to complete the safe cleanup of the environmental legacy from five decades of nuclear weapons development and government-sponsored nuclear energy research. Since 1995, Florida International University's Applied Research Center (FIU-ARC) has supported the DOE-EM mission and provided unique research capabilities to address some of these highly technical and difficult challenges. This partnership has allowed FIU-ARC to create a unique infrastructure that is critical for the training and mentoring of science, technology, engineering, and math (STEM) students and has exposed many STEM students to 'hands-on' DOE-EM applied research, supervised by the scientists and engineers at ARC. As a result of this successful partnership between DOE and FIU, DOE requested FIU-ARC to create the DOE-FIU Science and Technology Workforce Development Initiative in 2007. This innovative program was established to create a 'pipeline' of minority STEM students trained and mentored to enter DOE's environmental cleanup workforce. The program was designed to help address DOE's future workforce needs by partnering with academic, government and private companies (DOE contractors) to mentor future minority scientists and engineers in the research, development, and deployment of new technologies and processes addressing DOE's environmental cleanup challenges. Since its inception in 2007, the program has trained and mentored 78 FIU STEM minority students. Although, the program has been in existence for only five years, a total of 75 internships have been conducted at DOE National Laboratories, DOE sites, DOE Headquarters and field offices, and DOE contractors. Over 85 DOE Fellows have participated in the Waste Management Symposia since 2008 with a total of 68 student posters and 7 oral presentations given at WM. The DOE Fellows participation at WM has resulted in three Best Student Poster Awards (WM09, WM10, and WM11) and one Best Professional Poster Award (WM09). DOE Fellows have also presented their research at ANS DD and R and ANS Robotics Topical meetings. Moreover, several of our DOE Fellows have already obtained employment with DOE-EM, other federal agencies, DOE contractors. This paper will discuss how DOE Fellows program is training and mentoring FIU STEM students in Department of Energy's Office of Environmental Management technical challenges and research. This training and mentoring has resulted in the development of well trained and polished young scientists and engineers that will become the future workforce in charge of carrying on DOE-EM's environmental cleanup mission. The paper will showcase FIU's DOE Fellows model and highlight some of the applied research the DOE Fellows have conducted at FIU's Applied Research Center and across the Complex by participating in summer internship assignments. This paper will also present and highlight other Fellowships and internships programs sponsored by National Nuclear Security Agency (NNSA), DOE-EM, NRC, Energy (NE), and other federal agencies targeting workforce development. (authors)
EnergySolutions, the Division of Radiation Control at the Utah Department of Environmental Quality (UDEQ), the Conference of Radiation Control Program Directors (CRCPD), and the Department of Energy's Global Threat Reduction Initiative (GTRI) are collaborating on a truly innovative effort to expand opportunities for cost-effective sealed source disposal. These entities have developed a first-of-its-kind initiative to dispose of certain sealed sources at the EnergySolutions disposal facility near Clive, Utah, which normally cannot accept sealed sources of any type. This creative and collaborative effort to improve radiation health, safety, and security exemplifies the spirit and commitment represented by the Richard S. Hodes, M.D. Honor Lecture Award, which is presented annually at the Waste Management Symposia by the Southeast Compact Commission to encourage environmental professionals and political leaders to develop innovative approaches to waste management in the United States. The participants in the collaborative initiative are honored to receive special recognition for their efforts thus far. They also recognize that the hard work remains to be done. (authors)
Measurements of radiation dose rates in highly active environments, such as nuclear plant decommissioning or following a nuclear disaster, is challenging due to the extreme environments encountered and restricted access. Therefore, novel radiation detector technology is required to address these challenges. One such example of a radiation detection material is diamond, as it is able to withstand and measure high radiation intensities, is chemically inert and formable into extremely small, sensitive detectors. These detectors generate small currents when exposed to radiation, and if the radiation levels are high enough this can be measured. Testing of such detectors is not possible in routine laboratories due to the requirement to have high active radiation sources. However, through a new collaboration formed through the University of Bristol- Kyoto University bilateral symposia such facilities are accessible for UK researchers at Kyoto University Research Reactor Institute. This paper presents an overview of the collaborative research project, the accessible facilities for device manufacture and testing and some early results from radiation testing of diamond detectors at KURRI. (authors)
The safe and efficient disposal of radionuclide-contaminated organic wastes is a key component in the life-cycle of a nuclear power plant. Technologies are available for the processing of some of these wastes although there are a number of waste streams for which the disposition path is not clear or does not exist at all. For example, waste streams such as dioxin, furan and PCB-laden oils pose an issue for the US Dept. of Energy complex. These wastes present a challenge as they cannot be readily treated using existing treatment technologies because of legislative and material constraints such as gaseous phase radioactivity discharge limits, waste elemental content, by-product generation and waste resistance to thermal decomposition. Alternate methods of organics destruction can circumvent some of these issues by using different mechanisms of organics oxidation. One such innovative method, known as the Arvia organics destruction process, combines adsorption with electrochemical combustion and offers such an alternative. This technology, based on a patented material, Nyex{sup TM} that is able to act as both an adsorbent and as an electrode, allows the electrochemical combustion of adsorbed organics to occur on the material's surface. The result is the destruction of organics whilst the bulk of inorganic and radionuclide components remain in the aqueous phase. These components can subsequently be treated using existing waste processing technologies. This paper outlines recent work conducted on demonstrating the Arvia process against the destruction of dioxin, furan and PCB-laden wastes that demonstrates that the technology successfully removes these target species to below discharge standards in the aqueous phase. Based on these successful trials a test unit has been designed to demonstrate the process on actual radioactive wastes at the DOE Oak Ridge facility. The successful treatment of F027-coded waste has also been demonstrated and will be reported. The above work showcases the development, scaling and application of an innovative technology, first presented to the industry at the Waste Management Symposia in 2012, as another option for the treatment of challenging wastes with expensive, complex or no current disposal routes. The Arvia process adds to the portfolio of available treatment technologies and will help facilitate the decommissioning and waste disposal responsibilities of the nuclear industry. (authors)
For decades, the United States and other nations with nuclear programs have been planning for permanent disposition of spent nuclear fuel and high-level waste, to address the increasingly difficult problem of storing these materials for the long term. These plans are complicated by issues ranging from technological factors to regulatory approaches and public concerns about health and environmental protection. In its 2012 report, the Blue Ribbon Commission (BRC) on America's Nuclear Future identified a number of recommendations for creating a safe, long-term solution to the nation's problem of managing and disposing of its spent fuel and high-level radioactive waste. These include a recommendation that the U.S. Environmental Protection Agency (EPA) revise its standards for a high-level waste repository. The EPA is currently reviewing and synthesizing literature relevant to such standards, including: (1) existing national and international standards and guidelines for repositories; and (2) benefits and barriers to such standards, including limitations related to current technologies, as well as siting, licensing, and construction processes. This paper highlights findings of this literature review and synthesis. More than 90 countries, from Albania to Vietnam and Yemen, were identified as potential sources of relevant information based on existing nuclear programs or consideration of such programs to address future energy needs. Pursuant to the BRC recommendations, the U.S. Department of Energy (DOE) has compiled extensive information resources relevant to spent fuel and radioactive waste repositories in the Centralized Used Fuel Resource and Information Exchange (CURIE) database developed by Oak Ridge National Laboratory. Further valuable sources of information include annual proceedings of recent Waste Management Symposia, which provide insights into recent trends and progress across various national and international programs. Recent literature from a number of countries, including the United States and Canada, and the United Kingdom, Finland, Sweden, France, Germany, and other countries in Western Europe, as well as other regions including Australia, indicates that consent-based siting has emerged as a dominant theme. In addition to effective siting processes, key program needs identified in the literature include regulatory standards and performance context, as well as reliable technologies and engineered systems, such as for deep drilling and assured safe containment of these radioactive materials extending into the very long term. (authors)
The State of Utah, Department of Environmental Quality, Division of Radiation Control (DRC), EnergySolutions, the Conference of Radiation Control Program Directors (CRCPD), and the Department of Energy's Global Threat Reduction Initiative (GTRI) collaborated on a truly innovative effort to expand opportunities for cost-effective sealed source disposal. These entities developed a first-of-its-kind initiative to dispose of certain sealed sources at the EnergySolutions disposal facility near Clive, Utah, which normally cannot accept sealed sources of any type. This creative and collaborative effort to improve radiation health, safety, and security was recognized by the Richard S. Hodes, M.D. Honor Lecture Award. This award is presented annually by the Southeast Compact Commission at the Waste Management Symposia to encourage environmental professionals and political leaders to develop innovative approaches to waste management in the United States. The participants in the collaborative initiative are honored to receive special recognition for this effort. They also recognize that the hard work remains to be done in order to ensure the continued safe management and disposal of sealed sources. (authors)
The Obrigheim Nuclear Power Plant (KWO) is located in the Federal State of Baden- Wuerttemberg in Germany and was operated by the EnKK-KWO. The Nuclear Power Plant - a light water pressurized water reactor with 357 MW of electrical power - was operated from 1968 to 2005. In June 2009 the Energiewerke Nord GmbH (EWN) was charged with the dismantling planning and dismantling of the reactor. According to the German nuclear and radiation protection law, several licenses will be required for the realisation of this task. This also applies to the disposal of the waste produced by dismantling, which must finally be stored in the German final repository for low and medium-radioactive waste (underground repository 'Konrad'). In spring 2010 EWN completed all application documents for the dismantling of the reactor pressure vessel (RPV) and the RPV internals and EnKK-KWO delivered them to the responsible Environmental Ministry of Baden-Wuerttemberg. Since then it has been worked intensively on the design, construction and manufacturing of the facilities for dismantling. With a separate notification of amendment, it was applied for the license to install and commission the facilities for the dismantling of the RPV and the RPV internals at the Environmental Ministry of Baden-Wuerttemberg in October 2010. This notification of amendment was confirmed in summer 2012. In September 2011 the work process and test plan and the technical information about the campaign for the removal of the radioactive waste resulting from the RPV with internals, peripheral components and secondary waste with the aim of final disposal in the Federal Repository 'Konrad' was submitted to the Federal Office for Radiation Protection. The evaluation and assessment of the work process and test plan was concluded in August 2013, when it was audited by TUV Nord EnSys without any further measures and indications. On September 10 the work process and test plan was released by the Federal Office for radiation protection. The dismantling of the RPV internals upper core and lower core structure started in September 2013 in the wet cutting area in room 01.106/306 and were finished in October 2014. In the presentation 'Dismantling of the Obrigheim NPP Reactor and Waste Management' held on the WM Symposia in Phoenix, 2014, an overview about the remote cutting and packaging of the upper and lower core structure was given. In today's presentation the subsequent dismantling activities will be outlined and evaluated. The presentation will start with the short description of the basic frame conditions for the nuclear licensing procedure, important procedural principles, and necessary plant-specific conditions. After the remote cutting and packing of the reactor internals of the upper and lower core structure was completed, the wet cutting area 'reactor room 01.106/306' was cleaned and the reactor room rebuilt into a cutting area for peripheral components. After the peripheral components were dismantled, all preconditions were set to lift the RPV from its mounting position and to arrange it in the upper reactor room 01.306. After these activities were completed, the lifting of the RPV was prepared and the cutting area 'Dismantling of the RPV insulation in the reactor room 01.106/306' was set up. To carry out this task, a strand jack unit with connection block was installed on the bridge of the reactor building crane. The opening created by the dismantling of the pool plate was closed with a flap door. The manipulators used for the wet cutting of the RPV internals were also used for the remote dismantling of the RPV insulation and mounted in the cutting area. The remote facilities were handled from a control centre and/or control stand. The air-technical housing which has already been used for the remote dismantling of the RPV internals was designed for the dismantling of the RPV insulation and was extended for this dismantling scope with appropriate ventilation systems. A special feature is the fixation of the RPV insulation at the RPV corpus. The RPV insulation consists of insulation wool, wire mesh and metal-sheet insulation. This 'Sandwich Construction' is detached with a steel corset at the RPV corpus and partly tightened. The insulation of the RPV bottom dome is tightened at the supporting frame. Due to the activation of the material in the core area and the resulting high ambient dose rate the RPV insulation can only be dismantled remotely. Additionally, as asbestos fibers are expected to be found in the insulation the dismantling has to be performed according to the Technical Rules for hazardous substances. The demolition, restoration or maintenance works have to be performed remotely according to the Technical Rules for hazardous substances when the RPV is located in the cutting area. But in case of dismantling of a power reactor no such experience can be found. Beginning with the explanation of the technical, radiological and substantial boundary conditions this presentation will not only impart knowledge about the dismantling of the RPV insulation but also about the remote controlled packaging of the metal sheet insulation and the manual conditioning of the RPV insulation. Subsequently, reports on the remotely controlled cutting and packaging of the RDB are given. Here is particularly interesting that cutting methods have been used and how the activity determination of the segments was carried out. On the basis of the evaluation of the realisation the subsequent dismantling activities will be lined out. In parallel to the dismantling tasks, the waste package documentation for the final repository was issued, checked and confirmed for the containers loaded with parts of the RDB internals. The most important stages are exemplified in this presentation. (authors)
The outcome of the UK referendum on withdrawal from the European Union has resulted in a UK government decision that the UK must withdraw from Euratom. As at the date of the Waste Management Symposia, half of the 2-year programme for agreeing the terms of exit and putting in place replacement arrangements will have passed. If no agreement is reached by 29 March 2019 and no extension of that deadline is agreed the UK will automatically exit Euratom on that date. Aside from potential trade tariffs, Euratom exit will create binary questions on acceptability of nuclear trade and collaboration with the UK, reflecting current reliance on the UK's status as a Euratom member in establishing and implementing acceptable safeguarding requirements, ensuring inclusion of the UK within the scope of existing Euratom nuclear cooperation agreements, and as a basis for current UK bilateral nuclear cooperation agreements. This in turn risks disruption of international nuclear cooperation and trade, including provision of resources and know-how in support of the UK waste and decommissioning effort and international movement of waste for treatment. The paper will consider the current status of negotiations for UK withdrawal from Euratom, development of replacement safeguarding arrangements and replacement of international nuclear cooperation agreements essential to future nuclear cooperation and trade with the UK, taking into account: - the current and future legal basis of UK safeguarding obligations, including potential changes to the UK's Voluntary Offer Safeguards Agreement under the Non-Proliferation Treaty and likely acceptability of replacement arrangements to key nuclear trading partners; - practical arrangements for meeting those obligations post Euratom reliance via independent safeguarding arrangements; and - the need for and challenges in replacement of the UK's current reliance on its status as a Euratom member in taking the benefit of the existing US / Euratom s123 Agreement and other Euratom nuclear cooperation agreements. The paper will also provide a brief update on recent developments in international nuclear liabilities. The last 2 years have seen significant changes, with the Convention on Supplementary Compensation finally entering into force on 15 April 2015 and significant progress towards ratification of the 2004 Protocols to the Paris and Brussels Conventions. These changes are to be welcomed as beneficial to international cooperation, but also bring changes to liabilities risks associated with international movement of nuclear materials. Despite clear advances nuclear liabilities risks remain a significant consideration in negotiation of international nuclear contracts, recognising beneficial changes as well as on-going areas of risk and uncertainty. (authors)
11th Symposium of the International Society of Root Research (ISRR11) and the 9th International Symposium on Root Development (Rooting2021) - Root Biology Never Sleeps virtual meeting May 24 - 28. These meetings are generally held in separate years. However, because of travel restrictions imposed by the COVID-19 pandemic, the organizing committees of both symposia decided to host the two meetings as a fully-joint and virtual-only conference. Various time zones were considered when developing the schedule, as live interactions was an important focus. Scientific sessions were held from 3 a.m. to 10 p.m. US Central Daylight Time (CDT) to meet the international demand. More than 700 participants from 52 countries virtually attend both events which featured 74 talks in 16 sessions including: 10 plenary lectures, 16 keynote speakers and 48 selected talks. Additionally, nearly 300 posters were presented in nine poster sessions. The meeting also featured an Ambassador Program with 21 ambassadors from 10 countries. These ambassadors organized a half-day pre-symposium workshop and produced a review of the meeting for “New Phytologist”. The meeting also awarded a Lifetime Award to Dr. Wendy Silk (Prof. Emerita University of California, Davis). Committee Members: • Bob Sharp (Chair) – University of Missouri • Felix Fritschi (Chair, Int’l Program Committee) – University of Missouri • David Braun – University of Missouri • Vicki Bryan – University of Missouri • Rich Ferrieri – University of Missouri • Laura Greeley – University of Missouri (postdoctoral representative) • Ali Housh – University of Missouri (graduate student representative) • Allison Miller – Donald Danforth Plant Science Center and St Louis University • Mel Oliver – University of Missouri • Jonathan Stemmle – University of Missouri • Gus Thies – University of Missouri & Donald Danforth Plant Science Center (graduate student representative) • Chris Topp - Donald Danforth Plant Science Center
The Molten Chloride Reactor Experiment (MCRE) will be the first reactor featuring a fast-spectrum molten chloride circulating nuclear fuel system in the world. Planning for equipment removal and disposal (ERD) of MCRE has identified several technology gaps due to the unique environment of this nuclear experiment. Some of the gaps arise from the application of existing disassembly and/or sizing methods to novel material forms or in novel configurations. Others arise from unknown material behavior. This paper summarizes proposed test plans for ERD validation experiments to address these complicated or unknown equipment removal procedures. At the Waste Management Symposia in 2024, the Idaho National Laboratory (INL) MCRE ERD team presented the challenges associated with hosting multiple nuclear experiments in series with only brief transition periods between systems. Such difficulties include higher dose rates, the presence of radioisotopes infrequently encountered in reactor decommissioning and radioactive waste management, lack of intrinsic remote-operations infrastructure in the test bed, space constraints in the test bed, and contamination minimization requirements. To address these challenges, remote or semi-remote technologies are planned to be implemented in a non-hot cell environment with limited space availability. The team also discussed how a systems engineering approach is being used for conceptual development and design of equipment removal systems to address these challenges. For example, to reduce constraints for the removal of more difficult components, non-activated, noncontaminated elements are planned to be taken out first where possible. Still, there are complexities associated with the remaining components. In this work, the operational framework for MCRE ERD was reviewed for technical gaps and open questions, and test plans were drafted to address these areas. The tests plans were written for the following categories: vision systems, pipe cutting, drill/grout/filler, flush salt, and miscellaneous, with the miscellaneous group consisting of tests like techniques for removing bearings and reflector bricks. The test plans explore material, infrastructure, and staffing requirements needed for test execution. The test plans additionally focus on the evaluation of success. Determining the outcome of a test is imperative - as these explorative actions have the potential to rearrange or re-scope planned ERD activities. Success criteria identified thus far include required tool output, required area(s), debris production and mitigation, and repeatability. Test plans are an essential aspect of the systems engineering approach to MCRE ERD. They are used as the beginning steps in defining use cases for the ERD system. Performance of the validation tests is expected to begin in the summer of 2025 and will take approximately 9 to 12 months to complete. Execution of these plans will be expedited by specifying test needs ahead of time, facilitating efficient interactions with any subcontractors tasked with running the requested tests. Evaluating the outcomes of these tests will inform MCRE ERD procedures and timing and will also identify additional technical constraints for the MCRE ERD System. This upfront process optimization effort will help the project save time and resources at the end of the experiment.
In the event of a radiological accident, the rapid evaluation of the individual absorbed dose is paramount to discriminate those individuals who must receive medical attention. New research with genomic- and proteomic-wide tools is showing that within minutes to hours after exposure to ionizing radiation the cellular machinery is modified. For example: large-scale changes occur in the gene expression profiles involving a broad variety of cellular pathways after a wide range of both low dose (<10 cGy) and high dose (>10 cGy) ionizing radiation exposures. Symposium 12 was organized to address a wide range of biological effects using the latest technologies. To address current models following ionizing radiation exposure, methods in biodosimetry and dose effects the symposia featured a general overview titled “Model Systems and Current Approaches in Biodosimetry” by Matthew A. Coleman, from Lawrence Livermore National Laboratory and a talk entitled “Brief Overview of Biodosimetry Projects in the NIH Rad/Nuc Program” by Dr. Narayani Ramakrishnan, National Institute of Allergy and Infectious Diseases. These two talk set the tone for issues in data and model integration as well as addressing the national need for robust technologies for biological dosimetry. The report continues with more description of the presentations, along with the agenda and abstracts of the papers presented.
The 3rd Penn State Bioinorganic Workshop took place in early June 2014 and was combined with the 3rd Penn State Frontiers in Metallobiochemistry Symposium. The workshop was even larger than the 2nd Penn State Bioinorganic Workshop we offered in 2012. It had even more participants (162 rather than 123 in 2012). Like the 2012 workshop, the 2014 workshop had three parts. The first part consisted of 16 90-minute lectures presented by faculty experts on the topic of their expertise (see below). Based on the suggestions from the 2012 workshop, we have recorded all 16 lectures professionally and make them available to the entire bioinorganic community via online streaming. In addition, hard copies of the recordings are available as backup.
These proceedings contain papers prepared for the Monitoring Research Review 2010: Ground-Based Nuclear Explosion Monitoring Technologies, held 21-23 September, 2010 in Orlando, Florida,. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Air Force Research Laboratory (AFRL), US Army Space and Missile Defense Command, National Science Foundation (NSF), Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), and other invited sponsors. The scientific objectives of the research are to improve the United States capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.
These proceedings contain papers prepared for the Monitoring Research Review 2011: Ground-Based Nuclear Explosion Monitoring Technologies, held 13-15 September, 2011 in Tucson, Arizona. These papers represent the combined research related to ground-based nuclear explosion monitoring funded by the National Nuclear Security Administration (NNSA), Defense Threat Reduction Agency (DTRA), Air Force Research Laboratory (AFRL), US Army Space and Missile Defense Command, Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO), National Science Foundation (NSF), and other invited sponsors. The scientific objectives of the research are to improve the United States' capability to detect, locate, and identify nuclear explosions. The purpose of the meeting is to provide the sponsoring agencies, as well as potential users, an opportunity to review research accomplished during the preceding year and to discuss areas of investigation for the coming year. For the researchers, it provides a forum for the exchange of scientific information toward achieving program goals, and an opportunity to discuss results and future plans. Paper topics include: seismic regionalization and calibration; detection and location of sources; wave propagation from source to receiver; the nature of seismic sources, including mining practices; hydroacoustic, infrasound, and radionuclide methods; on-site inspection; and data processing.
No abstract prepared.