SEARCH · Engineering Papers
Results for “SOLIDS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Probing the Electronic Structure of a Thorium Nitride Complex by Solid-State 15N NMR Spectroscopy
The solid-state 15N NMR powder spectra of the thorium nitride complex, [K(18-crown-6)(THF)2][(R2N)3Th(m-15N)(Th(NR2)3] ([K][1-15N], R = SiMe3), and the thorium amide complex, [Th(NR2)3(15NH2)] (2-15N) were recorded. The spectrum for [K][1-15N] represents the first reported solid-state 15N NMR data for an actinide nitride complex. The experimentally measured tensor spans are 847 ppm for [K][1-15N] and 237 ppm for 2-15N. Both shielding tensors exhibit a near-zero asymmetry parameter, which for [K][1-15N] is consistent with a local rotational symmetry of its 15N-labelled nitride ligand. For 2-15N, the lack of asymmetry can be rationalized by a quasi-free Th-NH2 bond rotation in the solid-state. DFT calculations overestimate the tensor span somewhat for [K][1-15N], but provide isotropic shifts in good agreement with both the solid-state and solution values for both complexes. Natural localized molecular orbital (NLMO) analyses of the nuclear shielding reveal that the larger tensor span in [K][1-15N] vs. 2-15N is primarily a consequence of more pronounced covalency of the N-Th bonds, and large spin-orbit coupling due to significant Th 5f orbital contribution to those bonds, impacting the principal components of the shielding tensor perpendicular to the Th-N-Th axis. Overall, our analysis confirms the involvement of the 5f orbitals in Th-N multiple bonds, and further demonstrates the value of solid-state NMR spectroscopy for interrogating actinide-ligand bonding.
First principles study on electrochemical and chemical stability of solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries
All-solid-state Li-ion batteries based on ceramic solid electrolyte materials are a promising next-generation energy storage technology with high energy density and enhanced cycle life. The poor interfacial conductance is one of the key limitations in enabling all-solid-state Li-ion batteries. However, the origin of this poor conductance has not been understood, and there is limited knowledge about the solid electrolyte–electrode interfaces in all-solid-state Li-ion batteries. In this paper, we performed first principles calculations to evaluate the thermodynamics of the interfaces between solid electrolyte and electrode materials and to identify the chemical and electrochemical stabilities of these interfaces. Our computation results reveal that many solid electrolyte–electrode interfaces have limited chemical and electrochemical stability, and that the formation of interphase layers is thermodynamically favorable at these interfaces. These formed interphase layers with different properties significantly affect the electrochemical performance of all-solid-state Li-ion batteries. The mechanisms of applying interfacial coating layers to stabilize the interface and to reduce interfacial resistance are illustrated by our computation. This study demonstrates a computational scheme to evaluate the chemical and electrochemical stability of heterogeneous solid interfaces. Finally, the enhanced understanding of the interfacial phenomena provides the strategies of interface engineering to improve performances of all-solid-state Li-ion batteries.
Solid electrolyte for solid-state batteries: Have lithium-ion batteries reached their technical limit?
With increasing demand for electrical power on a distribution grid lacking storage capabilities, utilities and project developers must stabilize what is currently still intermittent energy production. In fact, over half of utility executives say “the most important emerging energy technology” is energy storage. Advanced, low-cost battery designs are providing promising stationary storage solutions that can ensure reliable, high-quality power for customers, but research challenges and questions lefts. Have lithium-ion batteries (LIBs) reached their technical limit? The industry demands are including high costs, inadequate energy densities, long recharge times, short cycle-life times and safety must be continually addressed. Safety is still the main problem on developing the lithium ion battery.The safety issue must be considered from several aspects, since it would become serious problems, such as an explosion in a Japan Airlines 787 Dreamliner’s cargo hold, due to the battery problem. The combustion is mainly due to the leakage or shortcut of the electrodes, caused by the liquid electrolyte and polymer separator. For this reason, the research on solid electrolyte for replacing the existing liquid electrolyte is very important. The materials used in existing lithium ion battery, such as a separator and liquid electrolyte must be replaced to new solid electrolytes, solid materials that exhibits high ionic conductivity. Due to these reasons, research on solid state ionics materials have been vastly growing worldwide, with the main aim not only to search new solid electrolyte to replace the liquid one, but also looking for low cost materials and environmentally friendly. A revolutionary paradigm is also required to design new stable anode and cathode materials that provide electrochemical cells with high energy, high power, long lifetime and adequate safety at competitive manufacturing costs. Lithium superionic conductors, which can be used as solid electrolytes, promise the potential to replace organic liquid electrolytes and thereby improve the safety of next-generation high-energy batteries. Li{sub 3}PO{sub 4} has been proved to be a good candidate for solid electrolyte, due to its easy in preparation, low cost, high melting temperature and good compatibility with the electrode materials. In the present work, Li{sub 3}PO{sub 4} has been prepared by wet chemical reaction, a simple method with the advantage of recycling a waste product H{sub 3}PO{sub 4}. The crystal structure has been characterized by both neutron and x-ray diffraction. The use of neutron scattering plays important role on observing the light atoms such as lithium ion. The x-ray diffraction results showed the crystal structure of orthorhombic phase P m n 21 (31), that belongs to the β-Li{sub 3}PO{sub 4}, with the lattice parameters are a = 6.123872, b = 5.250211, c = 4.876378. The conductivity of β-Li{sub 3}PO{sub 4} was around 10{sup −8} S/cm. Furthermore, the future application of the solid electrolyte layer in lithium ion battery will also be considered. It is concluded that the used of local resources on producing the solid electrolyte Li{sub 3}PO{sub 4} for lithium ion battery will give more added values to the researches and national industry.
Solid electrolytes and interfaces in all-solid-state sodium batteries: Progress and perspective
All-solid-state sodium batteries are promising candidates for the next generation of energy storage with exceptional safety, reliability and stability. The solid electrolytes are key components for enabling all-solid-state sodium batteries with high electrochemical performances. This Review discusses the current developments on inorganic and organic sodium ions solid electrolytes, including β/β’’-alumina, NASICON, sulfides, polymers and others. In particular, the structures, ionic conductivities and fabrications as well as electrochemical/chemical stabilities of solid electrolytes are discussed. Furthermore, the effective approaches for forming intimate interfaces between solid electrolytes and electrodes are also reviewed. And perspectives on future developments in the field of solid electrolytes and possible directions to improve interfacial contacts for future practical applications of all-solid-state sodium batteries are included.
Structure and stability of solid Xe(H{sub 2}){sub n}
Mixtures of xenon and molecular hydrogen form a series of hexagonal, van der Waals compounds at high pressures and at 300 K. Synchrotron, x-ray, single crystal diffraction studies reveal that below 7.5 GPa, Xe(H{sub 2}){sub 8} crystallizes in a P3{sup -}m1 structure that displays pressure-induced occupancy changes of two pairs of xenon atoms located on the 2c and 2d sites (while the third pair on yet another 2c site remains fully occupied). The occupancy becomes 1 at the P3{sup -}m1 to R3 transition and all the xenon atoms occupy the 3d sites in the high-pressure structure. These pressure-induced changes in occupancy coincide with volume changes that maintain the average Xe:H{sub 2} stoichiometry fixed at 1:8. The synchrotron x-ray diffraction and Raman measurements show that this unique hydrogen-bearing compound that can be synthesized at 4.2 GPa and 300 K, quenched at low temperatures to atmospheric pressure, and retained up to 90 K on subsequent warming.
An Electron/Ion Dual‐Conductive Alloy Framework for High‐Rate and High‐Capacity Solid‐State Lithium‐Metal Batteries
Abstract The solid‐state Li battery is a promising energy‐storage system that is both safe and features a high energy density. A main obstacle to its application is the poor interface contact between the solid electrodes and the ceramic electrolyte. Surface treatment methods have been proposed to improve the interface of the ceramic electrolytes, but they are generally limited to low‐capacity or short‐term cycling. Herein, an electron/ion dual‐conductive solid framework is proposed by partially dealloying the Li–Mg alloy anode on a garnet‐type solid‐state electrolyte. The Li–Mg alloy framework serves as a solid electron/ion dual‐conductive Li host during cell cycling, in which the Li metal can cycle as a Li‐rich or Li‐deficient alloy anode, free from interface deterioration or volume collapse. Thus, the capacity, current density, and cycle life of the solid Li anode are improved. The cycle capability of this solid anode is demonstrated by cycling for 500 h at 1 mA cm −2 , followed by another 500 h at 2 mA cm −2 without short‐circuiting, realizing a record high cumulative capacity of 750 mA h cm −2 for garnet‐type all‐solid‐state Li batteries. This alloy framework with electron/ion dual‐conductive pathways creates the possibility to realize high‐energy solid‐state Li batteries with extended lifespans.
SOLIDS PRECIPITATION EVENT IN MCU CAUSAL ANALYSIS AND RECOMMENDATIONS FROM SOLIDS RECOVERY TEAM
A process upset occurred in the Modular Caustic-Side Solvent Extraction Unit (MCU) facility on April 6th, 2014. During recovery efforts, a significant amount of solids were found in the Salt Solution Feed Tank (SSFT), Salt Solution Receipt Tanks (SSRTs), two extraction contactors, and scrub contactors. The solids were identified by Savannah River National Laboratory (SRNL) as primarily sodium oxalate and sodium alumina silicate (NAS) with the presence of some aluminum hydroxide. NAS solids have been present in the SSFT since simulant runs during cold chemical startup of MCU in 2007, and have not hindered operations since that time. During the process upset in April 2014, the oxalate solids partially blocked the aqueous outlet of the extraction contactors, causing salt solution to exit through the contactor organic outlet to the scrub contactors with the organic phase. This salt solution overwhelmed the scrub contactors and passed with the organic phase to the strip section of MCU. The partially reversed flow of salt solution resulted in a Strip Effluent (SE) stream that was high in Isopar™ L, pH and sodium. The primary cause of the excessive solids accumulation in the SSRTs and SSFT at MCU is attributed to an increase in the frequency of oxalic acid cleaning of the 512-S primary filter. Agitation in the SSRTs at MCU in response to cold weather likely provided the primary mechanism to transfer the solids to the contactors. Sources of the sodium oxalate solids are attributed to the oxalic acid cleaning solution used to clean the primary filter at the Actinide Removal Process (ARP) filtration at 512-S, as well as precipitation from the salt batch feed, which is at or near oxalate saturation. The Solids Recovery Team was formed to determine the cause of the solids formation and develop recommendations to prevent or mitigate this event in the future. A total of 53 recommendations were generated. These recommendations were organized into 4 focus areas: • Improve understanding of oxalate equilibrium and kinetics in salt solutions • Reduction/elimination of oxalic acid cleaning in 512-S • Flowsheet optimization • Improving diagnostic capability The recommendations implemented prior to resumption of MCU operations provide a risk mitigation or detection function through additional sampling and observation. The longer term recommendations provide a framework to increase the basic process knowledge of both oxalate chemistry and filtration behavior and then facilitate decisions that improve the salt flowsheet as a system.
Wet chemical synthesis and properties of argyrodite sulfide solid electrolytes for solid state lithium batteries
The commercialization of the lithium-ion battery (LIB) in 1991 was responsible for the explosion in portable electronic technologies that has been seen over the past 30 years. With the advent of electric vehicles and other high-powered technologies, there is tremendous demand for LIBs with higher energy density and high safety. To achieve this, new electrode materials must be explored. The obvious choice of anode material would be pure metal lithium, which has a theoretical specific capacity of 3860 mAh g-1 . Unfortunately, metal lithium anodes have not been widely commercialized due to their tendency to react violently with the flammable liquid electrolytes used in today’s batteries. Battery safety can best be achieved by adopting solid electrolytes in place of liquid electrolytes. Solid electrolytes are nonvolatile and nonflammable, safely allowing for the combination of high-capacity cathode materials with a Li metal anode. Argyrodite sulfide solid electrolytes such as halogen-doped Li6PS5X (X = Cl, Br, I) are noted for their high ionic conductivity. But before sulfides can be commercially adopted, they possess several disadvantages which must be addressed, including time- and energy-consuming synthesis processes, poor electrochemical stability, and intrinsically poor air stability. This dissertation seeks to address each of these challenges through materials design an synthesis strategies. In this work, we pioneer a solvent-based approach for the synthesis of argyrodite solid electrolytes Li7PS6 and Li6PS5Xinstead of a stringent solid-state synthesis. Nontoxic ethanol is employed as the solvent, enabling a rapid synthetic approach to produce argyrodite solid electrolytes with high phase purity and compositional flexibility. Compared with Li7PS6, halogen doping (i.e. X = F, Cl, Br, I) not only increases the ionic conductivity, but also enhances the electrochemical stability at the interface towards Li metal. Specifically, F-doped argyrodites produce a robust SEI layer containing LiF, contributing to enhanced interfacial stability. Finally, to address the air instability challenge, argyrodite-incorporated composite solid electrolytes (CSEs) are designed and prepared to produce stable and flexible membranes that are demonstrated in solid-state Li metal batteries. These advances push argyrodite sulfide solid electrolyte research further and pave the way for the proliferation of next generation lithium metal batteries.
Fabrication of ultrathin solid electrolyte membranes of β-Li 3 PS 4 nanoflakes by evaporation-induced self-assembly for all-solid-state batteries
All-solid-state lithium batteries are attractive candidates for next-generation energy storage devices because of their anticipated high energy density and intrinsic safety. Owing to their excellent ionic conductivity and stability with metallic lithium anodes, nanostructured lithium thiophosphate solid electrolytes such as β-Li 3 PS 4 have found use in the fabrication of all-solid lithium batteries for large-scale energy storage systems. However, current methods for preparing air-sensitive solid electrolyte membranes of lithium thiophosphates can only generate thick membranes that compromise the battery's gravimetric/volumetric energy density and thus its rate performance. To overcome this limitation, the solid electrolyte's thickness needs to be effectively decreased to achieve ideal energy density and enhanced rate performance. In this paper, we show that the evaporation-induced self-assembly (EISA) technique produces ultrathin membranes of a lithium thiophosphate solid electrolyte with controllable thicknesses between 8 and 50 μm while maintaining the high ionic conductivity of β-Li 3 PS 4 and stability with metallic lithium anodes up to 5 V. Finally, it is clearly demonstrated that this facile EISA approach allows for the preparation of ultrathin lithium thiophosphate solid electrolyte membranes for all-solid-state batteries.
ZnxMn1-xO Solid Solutions in the Rocksalt Structure: Optical, Charge Transport, and Photoelectrochemical Properties
Theoretical predictions of ZnO:MnO solid solutions (abbreviated here as ZMO) with the rocksalt-type structure suggest improved visible light absorption and suitable band edge positions for the overall water splitting reaction, but experimental efforts to produce such phases are limited by the low solubility of Zn within this structure type. Here, we produce solid solutions of ZnxMn1-xO, with x = 0.5 and 0.3 in the metastable rocksalt phase, using high-pressure and high-temperature (HPHT) techniques. X-ray diffraction and electron microscopy methods were employed to determine the crystal structure, chemical composition, and homogeneity on the submicron scale. The solid solutions exhibit increased optical absorbance in the visible spectral range as compared to those of the parent oxides ZnO and MnO. Our theoretical calculations for ZnxMn1-xO with x = 0.5, 0.25 predict band gaps of 2.53 and 2.98 eV, respectively, with an unusually large band gap bowing. Our calculations also show small effective electron mass for these materials indicating their potential for solar energy applications. Initial photoelectrochemical tests reveal that ZMO solid solutions are suitable for water oxidation and warrant further experimental optimization.
Reversible Conversion Reactions and Small First Cycle Irreversible Capacity Loss in Metal Sulfide‐Based Electrodes Enabled by Solid Electrolytes
Explore the source record for details and available documents.
Progress and Prospects of Inorganic Solid-State Electrolyte-Based All-Solid-State Pouch Cells
Here, all-solid-state batteries have piqued global research interest because of their unprecedented safety and high energy density. Significant advances have been made in achieving high room-temperature ionic conductivity and good air stability of solid-state electrolytes (SSEs), mitigating the challenges at the electrode–electrolyte interface, and developing feasible manufacturing processes. Along with the advances in fundamental study, all-solid-state pouch cells using inorganic SSEs have been widely demonstrated, revealing their immense potential for industrialization. This review provides an overview of inorganic all-solid-state pouch cells, focusing on ultrathin SSE membranes, sheet-type thick solid-state electrodes, and bipolar stacking. Moreover, several critical parameters directly influencing the energy density of all-solid-state Li-ion and lithium–sulfur pouch cells are outlined. Finally, perspectives on all-solid-state pouch cells are provided and specific metrics to meet certain energy density targets are specified. This review looks to facilitate the development of inorganic all-solid-state pouch cells with high energy density and excellent safety.
Qualitative numerical study of simultaneous high-G-intensified gas–solids contact, separation and segregation in a bi-disperse rotating fluidized bed in a vortex chamber
Explore the source record for details and available documents.
Kinetics and Rheological Behavior of Higher Solid (Solids >20%) Enzymatic Hydrolysis Reactions Using Dilute Acid Pretreated, Deacetylation and Disk Refined, and Deacetylation and Mechanical Refined (DMR) Corn Stover Slurries
Many potential biochemical pathways producing advanced hydrocarbon fuels from renewable lignocellulosic biomass require hydrolysates with high sugar concentrations and low toxicity, enabling flexible fermentation strategies, such as fed-batch fermentations capable of producing high product titers and production rates during fermentation. High sugar concentrations also increase the osmotic pressure in the hydrolysates, thus helping to decrease contamination issues. We have shown the production of high sugar concentrations directly from biomass without the need for energy/capital intensive concentration, conditioning, and/or purification steps. In our previous work, we successfully demonstrated high biomass-derived sugar concentrations (over 230 g/L fermentable sugars) in enzymatic hydrolysis from high solid (>20 wt % insoluble solids) digestions of dilute alkali deacetylated and mechanically refined (DMR) corn stover slurries. The goal of this work was to understand the effects of initial solid loadings on differently pretreated corn stover substrates on the rheological property changes of enzymatic-hydrolyzed slurries as well as the rates and yields of the enzymatic hydrolysis reactions. We performed high-solid enzymatic hydrolysis using deacetylated and disk refined (DDR), DMR, and dilute acid pretreated (DAP) corn stover substrates at four different initial total solid loadings, 17, 22, 27, and 32%. Slurry samples were collected at regular intervals for measurements of monomeric and oligomeric sugar concentrations (glucose and xylose), particle size distributions, viscosities, and yield stresses. We produced over 270 g/L of fermentable, monomeric sugars (157 g/L of glucose and 114 g/L of xylose) at 32 wt % total insoluble solid during enzymatic hydrolysis of the DMR substrates. The pumpabilities of the digested, high-solid enzymatic hydrolysates were shown to be comparable to other commercially relevant slurry streams, such as honey, peanut butter, and ketchup from the food industry. The conversion and rheological results indicate that high-solid enzymatic hydrolysis (~33 wt %) of DMR substrates is a promising and scalable technology for producing high sugar concentration slurries from lignocellulosic biomass.