Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

The Influence of Microgravity on Silica Sol-Gel Formation

We discuss space-flight experiments involving the growth of silica particles and gels. The effect of microgravity on the growth of silica particles via the sol-gel route is profound. In four different recipes spanning a large range of the parameter space that typically produces silica nanoparticles in unit-gravity, low-density gel structures were instead formed in microgravity. The particles that did form were generally smaller and more polydisperse than those grown on the ground. These observations suggest that microgravity reduces the particle growth rate, allowing unincorporated species to form aggregates and ultimately gel. Hence microgravity favors the formation of more rarefied structures, providing a bias towards diffusion-limited cluster-cluster aggregation. These results further suggest that in unit gravity, fluid flows and sedimentation can significantly perturb sol-gel substructures prior to gelation and these deleterious perturbations may be "frozen" into the resulting microstructure. Hence, sol-gel pores may be expected to be smaller, more uniform, and less rough when formed in microgravity.

Sibille, L.↗
NASA NTRS1999

Seeded Growth of Colloidal Silica Particles

The method of seeded growth was studied for producing mondisperse colloidal silica particles. It was shown that particle size as well as weight percent solids could be controlled by using this method. The particles were characterized by transmission electron microscopy (TEM) and quasielastic light scattering (QELS). The particles were found to have a bimodal size distribution when examined by TEM. The particle size as determined by QELS was found to be roughly 10-20% larger than the particle size as determined by TEM. Furthermore, the polydispersity (standard deviation/mean particle size) as determined by QELS was found to be significantly lower than the polydispersity as determined by TEM. This underscores the importance of using TEM as a characterization technique for determining particle monodispersity. It was also noted that there was an increase in particle roughness as the weight percent of the silica particles increased and a new nucleation of particles was observed as the weight percent approached 13%. A recipe for producing monodisperse silica particles in the 150 nm size range is presented.

Wurm, David B.↗
NASA NTRS2002

Solid State Electrolytes Prepared from PEO (360) Silanated Silica

All solid state composite electrolytes were prepared using fumed silica (SiO2) silanated with an oligomeric polyethylene oxide (PEO) silane containing 6-9 ethylene oxide repeat units, a PEO matrix and LiClO4 (8/1 O/Li). The PEO-silane covalently attached to the silica was amorphous, with a T(sub g) that increased from -90 C to -53 C after attachment. The conductivity of films prepared using the PEO-silanated silica increased to approx. 6 x 10(exp -5) S/cm at RT compared with approx. 1 x 10(-5) S/cm for films prepared with unsilanated SiO2.

Maitra, P.↗
NASA NTRS2002

Preparation and Characterization of Single Ion Conductors from High Surface Area Fumed Silica

Anions that can form dissociative salts with Li(+) have been prepared and covalently attached to high surface area fumed silica. When blended with polyethylene oxide (PEO), the functionalized fumed silica suppresses the crystallization of the PEO, provides dimensional stability, and serves as a single ion conductor. Since functionalized fumed silica is easily dispersed in common polar solvents, it can be incorporated in both the polymer electrolyte and the electrodes.

Zhang, H.↗
NASA NTRS2003

High Resolution, Single-Step Patterning of Silica Aerogels

Three-dimensional metallic structures are fabricated with high spatial resolution in silica aerogels. In our method, silica hydrogels are prepared with a standard base-catalyzed route, and exchanged with an aqueous solution typically containing Ag' ions (1 M) and 2-propanol (0.2 M). The metal ions are reduced photolytically with a table-top ultraviolet lamp, or radiolytically, with a focused X-ray beam. We fabricated dots and lines as small as 30 x 70 km, protruding for several mm into the bulk of the materials. The hydrogels are eventually supercritically dried to yield aerogels, without any measurable change in the shape and spatial resolution of the lithographed structures. Transmission electron microscopy shows that illuminated regions are composed of Ag clusters with a size of several pm, separated by thin layers of silica.

Bertino, M. F.↗
NASA NTRS2006

Chemical, Physical, and Mechanical Characterization of Isocyanate Cross-linked Amine-Modified Silica Aerogels

We describe a new mechanically strong lightweight porous composite material obtained by encapsulating the skeletal framework of amine-modified silica aerogels with polyurea. The conformal polymer coating preserves the mesoporous structure of the underlying silica framework and the thermal conductivity remains low at 0.041 plus or minus 0.001 W m(sup -1 K(sup -1). The potential of the new cross-linked silica aerogels for load-carrying applications was determined through characterization of their mechanical behavior under compression, three-point bending, and dynamic mechanical analysis (DMA). A primary glass transition temperature of 130 C was identified through DMA. At room temperature, results indicate a hyperfoam behavior where in compression cross-linked aerogels are linearly elastic under small strains (less than 4%) and then exhibit yield behavior (until 40% strain), followed by densification and inelastic hardening. At room temperature the compressive Young's modulus and the Poisson's ratio were determined to be 129 plus or minus 8 MPa and 0.18, respectively, while the strain at ultimate failure is 77% and the average specific compressive stress at ultimate failure is 3.89 x 10(exp 5) N m kg(sup -1). The specific flexural strength is 2.16 x 10(exp 4) N m kg(sup -1). Effects on the compressive behavior of strain rate and low temperature were also evaluated.

Katti, Atul↗
NASA NTRS2008

Evaluating Dimethyldiethoxysilane for use in Polyurethane Crosslinked Silica Aerogels

Silica aerogels are highly porous materials which exhibit exceptionally low density and thermal conductivity. Their "pearl necklace" nanostructure, however, is inherently weak; most silica aerogels are brittle and fragile. The strength of aerogels can be improved by employing an additional crosslinking step using isocyanates. In this work, dimethyldiethoxysilane (DMDES) is evaluated for use in the silane backbone of polyurethane crosslinked aerogels. Approximately half of the resulting aerogels exhibited a core/shell morphology of hard crosslinked aerogel surrounding a softer, uncrosslinked center. Solid state NMR and scanning electron microscopy results indicate the DMDES incorporated itself as a conformal coating around the outside of the secondary silica particles, in much the same manner as isocyanate crosslinking. Response surface curves were generated from compression data, indicating levels of reinforcement comparable to that in previous literature, despite the core/shell morphology.

Randall, Jason P.↗
NASA NTRS2007

Fluorine-Based DRIE of Fused Silica

A process of deep reactive-ion etching (DRIE) using a fluorine-based gas mixture enhanced by induction-coupled plasma (ICP) has been demonstrated to be effective in forming high-aspect-ratio three-dimensional patterns in fused silica. The patterns are defined in part by an etch mask in the form of a thick, high-quality aluminum film. The process was developed to satisfy a need to fabricate high-aspect-ratio fused-silica resonators for vibratory microgyroscopes, and could be used to satisfy similar requirements for fabricating other fused-silica components.

Yee, Karl↗
NASA NTRS2011

Process for preparing polymer reinforced silica aerogels

Process for preparing polymer-reinforced silica aerogels which comprises a one-pot reaction of at least one alkoxy silane in the presence of effective amounts of a polymer precursor to obtain a silica reaction product, the reaction product is gelled and subsequently subjected to conditions that promotes polymerization of the precursor and then supercritically dried to obtain the polymer-reinforced monolithic silica aerogels.

Meador, Mary Ann B.↗
NASA NTRS2012

Vapor Pressure and Evaporation Coefficient of Silicon Monoxide over a Mixture of Silicon and Silica

The evaporation coefficient and equilibrium vapor pressure of silicon monoxide over a mixture of silicon and vitreous silica have been studied over the temperature range (1433 to 1608) K. The evaporation coefficient for this temperature range was (0.007 plus or minus 0.002) and is approximately an order of magnitude lower than the evaporation coefficient over amorphous silicon monoxide powder and in general agreement with previous measurements of this quantity. The enthalpy of reaction at 298.15 K for this reaction was calculated via second and third law analyses as (355 plus or minus 25) kJ per mol and (363.6 plus or minus 4.1) kJ per mol respectively. In comparison with previous work with the evaporation of amorphous silicon monoxide powder as well as other experimental measurements of the vapor pressure of silicon monoxide gas over mixtures of silicon and silica, these systems all tend to give similar equilibrium vapor pressures when the evaporation coefficient is correctly taken into account. This provides further evidence that amorphous silicon monoxide is an intimate mixture of small domains of silicon and silica and not strictly a true compound.

Ferguson, Frank T.↗
NASA NTRS2014

Performance of Silica Gel in the Role of Residual Air Drying

Removal of carbon dioxide (CO2) is a necessary step in air revitalization and is often accomplished with sorbent materials. Since moisture competes with CO2 in sorbent materials, it is necessary to remove the water first. This is typically accomplished in two stages: bulk removal and residual drying. Silica gel is used as the bulk drying material in the Carbon Dioxide Removal Assembly (CDRA) in operation on ISS. There has been some speculation that silica gel may also be capable of serving as the residual drying material. This paper will describe test apparatus and procedures for determining the performance of silica gel in residual air drying.

air revitalization↗
NASA NTRS2015

HVI Ballistic Limit Characterization of Fused Silica Thermal Panes

Fused silica window systems are used heavily on crewed reentry vehicles, and they are currently being used on the next generation of US crewed spacecraft, Orion. These systems improve crew situational awareness and comfort, as well as, insulating the reentry critical components of a spacecraft against the intense thermal environments of atmospheric reentry. Additionally, these materials are highly exposed to space environment hazards like solid particle impacts. This paper discusses impact studies up to 10 km/s on a fused silica window system proposed for the Orion spacecraft. A ballistic limit equation that describes the threshold of perforation of a fuse silica pane over a broad range of impact velocities, obliquities and projectile materials is discussed here.

Miller, J. E.↗
NASA NTRS2017

Applying Fused Silica and Other Transparent Window Materials in Aerospace Applications

A variety of transparent ceramics, such as AlONs and spinels, that were developed for military applications hold promise as spacecraft windows. Window materials in spacecraft such as the Space Shuttle must meet many requirements such as maintaining cabin pressure, sustaining thermal shock, and tolerating damage from hyper-velocity impact while providing superior optical characteristics. The workhorse transparent material for space missions from Apollo to the International Space Station has been fused silica due in part to its low density, low coefficient of expansion and optical quality. Despite its successful use, fused silica exhibits lower fracture toughness and impact resistance as compared to newer materials. Can these newer transparent ceramics lighten spacecraft window systems and might they be useful for applications such as phone screens? This presentation will compare recent optical ceramics to fused silica and demonstrate how weight can be saved.

Standards↗
NASA NTRSDate not supplied

Testing Destruction of Clay Minerals By Silica-Poor Brines in Gale Crater, Mars Using Laboratory and Field Experiments

The Mars Science Laboratory (MSL) Curiosity rover landed in Gale crater to investigate the cause for mineralogical changes seen from orbit, including the clay-sulfate mineral transition observed on its central mound, Aeolis Mons. The lower strata show spectral signatures of clay minerals, hematite, and hydrated Mg sulfates, and the upper strata are dominated by hydrated Mg sulfate signatures. This significant transition has been observed in other locations on Mars, and therefore processes related to the clay mineral-sulfate transition are likely important broadly across Mars. The bulk mineralogy of ~3.7 Ga sedimentary rocks in Gale crater is a product of variations in sediment sources and depositional processes, with overprinting by episodes of early and late diagenetic alteration. Sedimentary analyses of the smectite clay minerals observed in the Glen Torridon (GT) region of Mount Sharp suggest formation in a lacustrine aqueous environment. Examination of the Vera Rubin ridge (VRR) strata indicate that it was formed at the same time as GT and later altered by extensive diagenesis. Recent work suggests that the observed mineral transition from smectites and talc-serpentinites in GT to iron oxides and oxyhydroxides and VRR may have resulted from extensive diagenetic alteration by density driven, silica-poor brines sourced from the overlying sulfur-bearing unit on Mount Sharp. This process of alteration by silica-poor brines is observed in limited locations on Earth. We are therefore working to demonstrate the impacts of silica poor brines on clay mineral alteration in laboratory column and terrestrial analog burial experiments. Column experiments allow the investigation of dissolution and precipitation under conditions that represent a closer analog to natural environments, while burial experiments allow examination of weathering reactions of a known starting material after a specific period of time in a natural field environment. Both methods are valuable for interpreting the water-rock interactions between clay minerals and brines. In preparation for these longer-term column and burial experiments, we are performing preliminary batch dissolution experiments on materials relevant to Glen Torridon: nontronite and serpentinite. We are using magnesium sulfate brine solutions relevant to those proposed on Mars. The results of this study can provide constraints on the characteristics of the diagenetic fluids that formed the altered minerals in Gale crater. They can also provide insights into the role of brine density-driven diagenesis in past aqueous environments on Mars, which have been proposed to be widespread.

J E Valdueza↗
NASA NTRS1972

Devitrification and shrinkage behavior of silica fibers

Devitrification and shrinkage of three batches of silica fibers were investigated in the temperature range of 1200 to 1350 C. Fibers with high water and impurity content devitrified rapidly to cristobalite and quartz and exhibited rapid, but the least amount of, shrinkage. A batch with low water and impurity content devitrified more slowly to cristobalite only and underwent severe shrinkage by the mechanism of viscous flow. A third batch of intermediate purity level and low water content devitrified at a moderate rate mainly to cristobalite but shrunk very rapidly. Completely devitrified silica fibers did not exhibit any further shrinkage.

Zaplatynsky, I.↗
NASA NTRS1971

Optical transmittance of fused silica at elevated temperatures during high energy electron bombardment.

An experimental determination of the optical transmission of Corning 7940 UV and Suprasil I fused silica has been made. The LeRC dynamitron provided the equivalent ionizing radiation and high temperature that the transparent gas divider of an operating nuclear light bulb engine would experience. The irradiation induced absorption was measured at 2150 A, 2700 A, and 4500 A. The length of the irradiations were sufficient so that an equilibrium between radiation induced coloration and high temperature annealing was reached. The experimental results indicate a significant optical absorption, particularly at the shorter wavelength, which would make the use of fused silica in this concept questionable.

Smith, A. B.↗
NASA NTRS1973

Reusable silica surface-insulation material

Material was specifically developed for manufacture of insulating tiles, but it can be molded into other shapes as required. Basic raw materials are high-purity silica fiber, fumed-silica powder, and reagent-grade starch. Only purest materials are used, and care must be taken to avoid contamination during processing.

Goldstein, H. E.↗