Engineering PapersSearch

SEARCH · Engineering Papers

Results for “SHARP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Numerical simulations of high-speed flows about waveriders with sharp leading edges

A procedure is developed for the numerical simulation of stagnation-free inviscid supersonic and hypersonic flows about waveriders with sharp leading edges. The numerical approach involves the development of a specialized grid generator (named HYGRID), an algebraic solution-adaptive grid scheme, and a modified flow solving method. A comparison of the results obtained for several waverider geometries with exact solutions, other numerical solutions, and experimental results demonstrated the ability of the new procedure to produce stagnation-free Euler solutions about sharp-edged configurations and to describe the physics of the flow in these regions.

Jones, Kevin D.

On the Predictability of Substorms Following Sharp Northward Turnings of the IMF

It has been shown that there is an association between changes of the interplanetary magnetic field (IMF) that are expected to lead to a reduction in magnetospheric convection (northward turnings, reductions) and the onset of the expansion phase of substorms. This has been previously demonstrated by analyses of IMF data during time intervals associated with identified substorm onsets. Here we examine whether observations of northward turnings of the IMF can be used to predict the occurrence of substorms. We first identified sharp northward turnings that follow an interval of steady, southward IMF using measurements from the Wind spacecraft during the first 180 days of 1997. We also required that the northward turning be observed by either IMP-8 or GEOTAIL, in addition to Wind, and that one of the observing satellites be sufficiently close to the Earth-Sun line, or that the two observing satellites be sufficiently separated, that we are reasonably certain that the northward turning affected the magnetosphere. We also used the dual observations to estimate the arrival of the northward turning at the Earth. Using these criteria, we predicted 17 substorms. We then searched for the following signatures of substorm onset around the time of the predicted onset: auroral brightening followed by auroral bulge expansion observed by Polar UVI, geosynchronous particle injection, geosynchronous magnetic field dipolarization, and an appropriate magnetic disturbance at the surface of the Earth. Of the 17 predictions of substorms, 10 were successful in that a substorm onset was observed within 12 min of the predicted onset, 1 is indeterminate due to a lack of data at the Earth, 1 had unusual activity that we have not been able to identify, and 5 were unsuccessful. The failure of these last 5 predictions is explicable. Two of the northward turnings that failed to produce substorms were preceded by the lowest average of the set. The remaining 3 were the only cases in which the northward turning was accompanied by a simultaneous sharp increase. The increase would be expected to offset the decrease in convection that would otherwise be expected to be associated with a northward turning. These results indicate that it is an IMF change that leads to a reduction in convection, rather than just a northward turning or reduction that is associated with substorms, and that at least some substorms can be predicted by measurements of the IMF.

Blanchard, G. T.

Sharp Refractory Composite Leading Edges on Hypersonic Vehicles

On-going research of advanced sharp refractory composite leading edges for use on hypersonic air-breathing vehicles is presented in this paper. Intense magnitudes of heating and of heating gradients on the leading edge lead to thermal stresses that challenge the survivability of current material systems. A fundamental understanding of the problem is needed to further design development. Methodology for furthering the technology along with the use of advanced fiber architectures to improve the thermal-structural response is explored in the current work. Thermal and structural finite element analyses are conducted for several advanced fiber architectures of interest. A tailored thermal shock parameter for sharp orthotropic leading edges is identified for evaluating composite material systems. The use of the tailored thermal shock parameter has the potential to eliminate the need for detailed thermal-structural finite element analyses for initial screening of material systems being considered for a leading edge component.

Walker, Sandra P.

The Complex, Multi-Stage History of Mt. Sharp

The Curiosity rover is exploring 155 km diameter Gale crater and Mt. Sharp, Gale's 5 km high central mound. This study addresses the formation and erosion history of Mt. Sharp

Allen, Carlton C.

Major Volatiles from MSL SAM Evolved Gas Analyses: Yellowknife Bay Through Lower Mount Sharp

The Sample Analysis at Mars (SAM) and Chemistry and Mineralogy (CheMin) instruments on the Mars Science Laboratory (MSL) analysed several subsamples of <150 μm fines from five sites at Gale Crater. Three were in Yellowknife Bay: the Rocknest aeolian bedform ("RN") and drilled Sheepbed mudstone from sites John Klein ("JK") and Cumberland ("CB"). One was drilled from the Windjana ("WJ") site on a sandstone of the Kimberly formation investigated on route to Mount Sharp. Another was drilled from the Confidence Hills ("CH") site on a sandstone of the Murray Formation at the base of Mt. Sharp (Pahrump Hills). Outcrops are sedimentary rocks that are largely of fluvial or lacustrine origin, with minor aeolian deposits.. SAM's evolved gas analysis (EGA) mass spectrometry detected H2O, CO2, O2, H2, SO2, H2S, HCl, NO, and other trace gases, including organic fragments. The identity and evolution temperature (T) of evolved gases can support CheMin mineral detection and place constraints on trace volatile-bearing phases or phases difficult to characterize with XRD (e.g., X-ray amorphous phases). They can also give constraints on sample organic chemistry. Here, we discuss trends in major evolved volatiles from SAM EGA analyses to date.

McAdam, A. C.

Phosphate Stability in Diagenetic Fluids Constrains the Acidic Alteration Model for Lower Mt. Sharp Sedimentary Rocks in Gale Crater, Mars

The Mars rover Curiosity has encountered silica-enriched bedrock (as strata and as veins and associated halos of alteration) in the largely basaltic Murray Fm. of Mt. Sharp in Gale Crater. Alpha Particle X-ray Spectrometer (APXS) investigations of the Murray Fm. revealed decreasing Mg, Ca, Mn, Fe, and Al, and higher S, as silica increased (Fig. 1). A positive correlation between SiO2 and TiO2 (up to 74.4 and 1.7 wt %, respectively) suggests that these two insoluble elements were retained while acidic fluids leached more soluble elements. Other evidence also supports a silica-retaining, acidic alteration model for the Murray Fm., including low trace element abundances consistent with leaching, and the presence of opaline silica and jarosite determined by CheMin. Phosphate stability is a key component of this model because PO4 3- is typically soluble in acidic water and is likely a mobile ion in diagenetic fluids (pH less than 5). However, the Murray rocks are not leached of P; they have variable P2O5 (Fig. 1) ranging from average Mars (0.9 wt%) up to the highest values in Gale Crater (2.5 wt%). Here we evaluate APXS measurements of Murray Fm. bedrock and veins with respect to phosphate stability in acidic fluids as a test of the acidic alteration model for the Lower Mt. Sharp rocks.

Berger, J. A.

Variability in Mt. Sharp Group Bedrock as Seen By ChemCam Passive and Active Spectra

The Curiosity rover landed in Gale crater in August 2012 and has since been travelling up the central sedimentary mound known as Mt. Sharp. The ChemCam instrument on Curiosity was designed primarily for the use of Laser Induced Breakdown Spectroscopy (LIBS), where a laser ablates a small amount of material from the target and the spectrum of the resulting plasma yields elemental abundance data. ChemCam’s three spectrometers range from 240-905 nm and can also take passive spectra (without the use of the laser). The spectral range ChemCam passive spectra observe is sensitive to charge-transfer and crystal field absorptions related to iron-bearing minerals. In the first 2934 sols of Curiosity’s mission, 9,400 passive spectra were taken of bedrock targets in Mt. Sharp’s Murray and Carolyn Shoemaker formations. We examine these spectra using spectral slope/ratio and band depth calculations as well as Principal Component Analysis (PCA). For the first time, paired passive spectra and LIBS elemental abundances are compared on a large scale. Finally, CheMin data are compared to ChemCam passive observations to understand sources of spectral variability.

H T Manelski