Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SFR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Nuclear data uncertainty propagation for neutronic key parameters of CEA's SFR V2B and CFV sodium fast reactor designs

This paper presents a nuclear data uncertainty propagation analysis for two CEA's Sodium-cooled Fast Reactor designs: the SFR V2B and CFV cores. The nuclear data covariance matrices are provided by the DER/SPRC/LEPh's nuclear data team (see companion paper) for several major isotopes. From the current status of this analysis, improvements on certain nuclear data reactions are highlighted as well as the need for new specific integral experiments in order to meet the technological breakthroughs proposed by the CFV core. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Performance of supercritical CO{sub 2} Brayton cycle with additive gases at varying critical points for SFR application

The supercritical carbon dioxide Brayton cycle (S-CO{sub 2} cycle) has received attention as alternative to the energy conversion system for a Sodium-cooled Fast Reactor (SFR). The high cycle efficiency of S-CO{sub 2} cycle is attributed to significantly reduced compressor work. This is because the compressor operates like a pump in the vicinity of CO{sub 2} critical point. To make use of this feature, the minimum cycle operating range of S-CO{sub 2} cycle, which is the main compressor inlet condition, should be located close to the critical point of CO{sub 2}. This translated into that the critical point of CO{sub 2} is the limitation of the lowest cycle condition of S-CO{sub 2} cycles. To increase the flexibility and broaden the applicability of the cycle, changing the critical point of CO{sub 2} by mixing additive gases could be adopted. An increase in the efficiency of the S-CO{sub 2} cycle could be achieved by decreasing critical point of CO{sub 2}. In addition, increasing critical point of CO{sub 2} could be utilized to obtain improved cycle performances at ascending heat sink temperature of hot arid areas. Due to the rapid fluctuations of thermo-physical properties of gas mixtures near the critical point, an in-house cycle analysis code coupled to NIST property database was developed. Several gases were selected as potential additives through the screening process for thermal stability and chemical interaction with sodium. By using the developed cycle code, optimized cycles of each gas mixture were compared with the reference case of S-CO{sub 2} cycle. For decreased critical temperatures, CO{sub 2}-Xe and CO{sub 2}-Kr showed an increase in the total cycle efficiency. At increasing critical temperatures, the performance of CO{sub 2}-H{sub 2}S and CO{sub 2}-cyclohexane is superior to S-CO{sub 2}cycle when the compressor inlet temperature is above the critical temperature of CO{sub 2}. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Transmutation abilities of the SFR low void effect core concept 'CFV' 3600 MWth

This paper presents an evaluation of the potential of minor actinide transmutation in a 3600 MWth SFR core designed with the low void effect core concept (namely 'CFV concept'). This concept is based upon an axially heterogeneous design with an internal fertile zone, and two radial fuel zones with different heights. Two modes of minor actinide transmutation are considered. The homogeneous mode where the minor actinides (MA) are diluted in the fuel is studied considering different options: - MA diluted in the whole core, - MA diluted in the internal and external fuel zone, - MA diluted in the internal fertile zone, for which different isotopic vectors and contents in fuel are analyzed. The heterogeneous mode is also studied with MA placed in external blanket bearings, with contents of 20%. The results are compared to those obtained with a traditional homogenous core concept (SFRV2B type) in terms of transmutation performances. Impacts of the transmutation assumptions on transmutation performances, on fuel cycle and safety parameters (void effect, Doppler) are also presented. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A vented inverted fuel assembly design for an SFR

The inverted geometry (fuel outside coolant tubes) has been previously investigated at MIT for application in gas-cooled fast reactors and pressurized water-cooled thermal reactors. Venting has also been studied for conventional fuel pins and was employed for those in the Dounreay Fast Reactor. In the present work the inverted fuel approach was adopted because it allows high fuel volume fraction, reduction of the coolant void reactivity, neutron leakage and enrichment, as well as lower pressure drop for the same channel length because grids and wire wraps are no longer necessary. Furthermore most results also apply to venting of conventional fuel pins. Physical and chemical behavior of volatile fission products in sodium was investigated to determine the maximum activity inventory which would eventually be released into the primary sodium. Results of this analysis show that the most troublesome radionuclides in terms of propensity to escape from the venting system are noble gases ({sup 85}Kr and {sup 133}Xe), and cesium ({sup 134}Cs and {sup 137}Cs). A final vented inverted fuel assembly design is proposed which meets all the design goals which have been set. Additionally purification systems were devised to reduce radionuclide activity of the coolant and the cover gas to tolerable levels. It is concluded that vented inverted (or vented conventional pin) fuel is a feasible concept and has sufficiently promising advantages - increasing fuel volume fraction to 50% and core outlet temperature by 20 deg. C, hence incrementing plant thermal efficiency by about 1% - to warrant serious consideration for future SFR designs. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Review of fuel/cladding eutectic formation in metallic SFR fuel pins

Sodium-cooled Fast Reactors (SFRs) remain a strong contender amongst the Generation IV reactor concepts. Metallic fuel has been a primary fuel option for SFR designers in the US and was used extensively in the first generation of SFRs. One of the benefits of metallic fuel is its chemical compatibility with the coolant; unfortunately this compatibility does not extend to steel cladding at elevated temperatures. It has been known that uranium, plutonium, and rare earths diffuse with cladding constituents to form a low melting point fuel/cladding eutectic which acts to thin the cladding once the interfacial temperature rises above the system liquidus temperature. Since the 1960's, many experiments have been performed and published to evaluate the rate of fuel/cladding eutectic formation and the temperature above which melting will begin as a function of fuel/cladding interfacial temperature, time at temperature, fuel constituents (uranium, fissium or uranium (plutonium) zirconium), cladding type (stainless steel 316, stainless steel 306, D9 or HT9), beginning of life linear power, plutonium enrichment and burnup. The results of these tests, however, remain scattered across conference and journal papers spanning 50 years. The tests used to collect this data also varied in experimental procedure throughout the years. This paper will consolidate the experimental data into four groups of similar test conditions and expand upon the testing performed for each group in detail. A companion paper in PSA 2011 will discuss predictive correlations formulated from this database. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Behavior of an heterogeneous annular FBR core during an unprotected loss of flow accident: Analysis of the primary phase with SAS-SFR

In the framework of a substantial improvement on FBR core safety connected to the development of a new Gen IV reactor type, heterogeneous core with innovative features are being carefully analyzed in France since 2009. At EDF R and D, the main goal is to understand whether a strong reduction of the Na-void worth - possibly attempting a negative value - allows a significant improvement of the core behavior during an unprotected loss of flow accident. Also, the physical behavior of such a core is of interest, before and beyond the (possible) onset of Na boiling. Hence, a cutting-edge heterogeneous design, featuring an annular shape, a Na-plena with a B{sub 4}C plate and a stepwise modulation of fissile core heights, was developed at EDF by means of the SDDS methodology, with a total Na-void worth of -1 $. The behavior of such a core during the primary phase of a severe accident, initiated by an unprotected loss of flow, is analyzed by means of the SAS-SFR code. This study is carried-out at KIT and EDF, in the framework of a scientific collaboration on innovative FBR severe accident analyses. The results show that the reduction of the Na-void worth is very effective, but is not sufficient alone to avoid Na-boiling and, hence, to prevent the core from entering into the primary phase of a severe accident. Nevertheless, the grace time up to boiling onset is greatly enhanced in comparison to a more traditional homogeneous core design, and only an extremely low fraction of the fuel (<0.1%) enters into melting at the end of this phase. A sensitivity analysis shows that, due to the inherent neutronic characteristics of such a core, the gagging scheme plays a major role on the core behavior: indeed, an improved 4-zones gagging scheme, associated with an enhanced control rod drive line expansion feed-back effect, finally prevents the core from entering into sodium boiling. This major conclusion highlights both the progress already accomplished and the need for more detailed future analyses, particularly concerning: the neutronic burn-up scheme, the modeling of the diagrid effect and the control rod drive line expansion feed-backs, as well as the primary/secondary systems thermal-hydraulics behavior. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Impact of the control rod consumption on the reactivity control of a SFR break-even core

Current design studies on Sodium Fast Reactor (SFR) differ from those performed in the past by the fact that design criteria are now those of the Generation IV reactors. In order to improve their safety, reactors with break-even cores are preferred because they minimize the needs in terms of reactivity control and limit the consequences of control rod withdrawal. Furthermore, as the reactivity control needs are low, break-even core enables the use of absorbing materials with reduced efficiency (natural boron, hafnium...). Nevertheless, the use of control rods with few absorbing materials may present the disadvantage of a non-negligible ({approx}10%) loss of efficiency due to their consumption under irradiation. This paper presents a methodology to calculate accurately and analyze this consumption. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Casting evaluation of U-Zr alloy system fuel slug for SFR prepared by injection casting method

Metal fuel slugs of U-Pu-Zr alloys for Sodium-cooled Fast Reactor (SFR) have conventionally been fabricated by a vacuum injection casting method. Recently, management of minor actinides (MA) became an important issue because direct disposal of the long-lived MA can be a long-term burden for a tentative repository up to several hundreds of thousand years. In order to recycle transuranic elements (TRU) retained in spent nuclear fuel, remote fabrication capability in a shielded hot cell should be prepared. Moreover, generation of long-lived radioactive wastes and loss of volatile species should be minimized during the recycled fuel fabrication step. In order to prevent the evaporation of volatile elements such as Am, alternative fabrication methods of metal fuel slugs have been studied applying gravity casting, and improved injection casting in KAERI, including melting under inert atmosphere. And then, metal fuel slugs were examined with casting soundness, density, chemical analysis, particle size distribution and microstructural characteristics. Based on these results there is a high level of confidence that Am losses will also be effectively controlled by application of a modest amount of overpressure. A surrogate fuel slug was generally soundly cast by improved injection casting method, melted fuel material under inert atmosphere.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Coupled neutronic-thermal-hydraulic simulations of the European SFR core

Within the European SFR (Sodium-cooled Fast Reactor) - Safety Measures Assessment and Research Tools (ESFR-SMART) project, steady-state coupled simulation of the ESFR core has been performed using several core analysis packages, with the objective of quantifying the coupling effect. Focus is on the fuel Doppler effect and coolant expansion effect. Standalone neutronics calculations in TRACE/PARCS (PSI), DYN3D (HZDR) and WIMS (Jacobs) showed superb agreement with the reference Serpent power distribution (root mean square - rms discrepancies of 1.3%, 1.5% and 0.7% respectively). Results for COUNTHER (CIEMAT) were also in reasonable agreement, but with a somewhat higher discrepancy of 3.7%. Temperature distributions from thermal-hydraulic calculations were also compared and are found to be in good agreement. The effect of Doppler and coolant density feedback on core power distribution was predicted by TRACE/PARCS, DYN3D and WIMS to be between 0.4% and 0.8% rms difference in assembly powers. Reactivity coefficients for perturbations in the inlet temperature, flow rate and core power were shown to be negative for these three codes, with values of roughly -0.5 pcm/C. degree, -0.3 pcm/C. degree and -3.5 pcm/C. degree respectively. A preliminary investigation of differential thermal expansion effects indicates that this may have a significant effect on core power distribution of a few %, greater than anticipated a priori and may warrant inclusion in coupled core analysis to ensure the accurate calculation of power distributions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sodium-cooled Fast Reactor (SFR) Coolant Flow

Pressure distribution in a 217-pin fuel bundle with wire-wrapped spacers. The Nek5000 simulation calculations were run with 3 million spectral elements of order N=7 (one billion points total) with sustained 80% parallel efficiency. Credits; Science: Paul Fischer, Argonne National Laboratory. Visualization: Hank Childs, Lawrence Berkeley National Laboratory

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of SFR Wire Wrap Simulation Uncertainties

Predictive modeling and simulation of nuclear reactor performance and fuel are challenging due to the large number of coupled physical phenomena that must be addressed. Models that will be used for design or operational decisions must be analyzed for uncertainty to ascertain impacts to safety or performance. Rigorous, structured uncertainty analyses are performed by characterizing the model’s input uncertainties and then propagating the uncertainties through the model to estimate output uncertainty. This project is part of the ongoing effort to assess modeling uncertainty in Nek5000 simulations of flow configurations relevant to the advanced reactor applications of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. Three geometries are under investigation in these preliminary assessments: a 3-D pipe, a 3-D 7-pin bundle, and a single pin from the Thermal-Hydraulic Out-of-Reactor Safety (THORS) facility. Initial efforts have focused on gaining an understanding of Nek5000 modeling options and integrating Nek5000 with Dakota. These tasks are being accomplished by demonstrating the use of Dakota to assess parametric uncertainties in a simple pipe flow problem. This problem is used to optimize performance of the uncertainty quantification strategy and to estimate computational requirements for assessments of complex geometries. A sensitivity analysis to three turbulent models was conducted for a turbulent flow in a single wire wrapped pin (THOR) geometry. Section 2 briefly describes the software tools used in this study and provides appropriate references. Section 3 presents the coupling interface between Dakota and a computational fluid dynamic (CFD) code (Nek5000 or STARCCM+), with details on the workflow, the scripts used for setting up the run, and the scripts used for post-processing the output files. In Section 4, the meshing methods used to generate the THORS and 7-pin bundle meshes are explained. Sections 5, 6 and 7 present numerical results for the 3-D pipe, the single pin THORS mesh, and the 7-pin bundle mesh, respectively.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Status of SFR Codes and Methods QA Implementation

This report details development of the SAS4A/SASSYS-1 SQA Program and describes the initial stages of Program implementation planning. The provisional Program structure, which is largely focused on the establishment of compliant SQA documentation, is outlined in detail, and Program compliance with the appropriate SQA requirements is highlighted. Additional program activities, such as improvements to testing methods and Program surveillance, are also described in this report. Given that the programmatic resources currently granted to development of the SAS4A/SASSYS-1 SQA Program framework are not sufficient to adequately address all SQA requirements (e.g. NQA-1, NUREG/BR-0167, etc.), this report also provides an overview of the gaps that remain the SQA program, and highlights recommendations on a path forward to resolution of these issues. One key finding of this effort is the identification of the need for an SQA program sustainable over multiple years within DOE annual R&D funding constraints.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗