Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCANDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire

This paper investigates the performance of surface acoustic wave (SAW) devices consisting of reactively sputter deposited scandium doped aluminum nitride (Sc{sub x}Al{sub 1-x}N) thin films as piezoelectric layers on sapphire substrates for wireless sensor or for RF-MEMS applications. To investigate the influence of piezoelectric film thickness on the device properties, samples with thickness ranging from 500 nm up to 3000 nm are fabricated. S{sub 21} measurements and simulations demonstrate that the phase velocity is predominantly influenced by the mass density of the electrode material rather than by the thickness of the piezoelectric film. Additionally, the wave propagation direction is varied by rotating the interdigital transducer structures with respect to the crystal orientation of the substrate. The phase velocity is about 2.5% higher for a-direction compared to m-direction of the sapphire substrate, which is in excellent agreement with the difference in the anisotropic Young's modulus of the substrate corresponding to these directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase transformation and growth mechanism of RF sputtered ferroelectric lead scandium tantalate (PbSc 0.5 Ta 0.5 O 3 ) films

Lead scandium tantalate (PbSc 0.5 Ta 0.5 O 3 , PST), an order/disorder ferroelectric, is a potential candidate for electrocaloric cooling and pyroelectric infrared (IR) detector. In this work, we report the phase transformation kinetics from two series of samples containing pure amorphous and mixture of amorphous and pyrochlore to desired perovskite phase using postdeposition rapid thermal processing (RTP) as well as growth mechanism of RF sputtered PST thin films using excess lead target on platinized silicon (Pt/Ti/SiO 2 /Si) substrates. We find that small changes in the temperature ramp have a large effect on the degree of perovskite conversion (ferroelectric phase), orientation (crystallographic texture), and long-range order parameter (< S 111 >). Through isothermal annealing, we obtained optimal perovskite phase at ≥700°C temperature. The phase transformation is characterized by spontaneous formation of center-type in-plane radial rosette-like structures revealed by scanning electron microscopy. The PST perovskite crystallites were found to coexist with pyrochlore in RTP annealed films. The volume fractions for perovskite and pyrochlore phase were obtained from the analysis of “rosettes” and respective X-ray diffraction intensities which helped to determine various parameters associated with phase kinetics (n, k, and activation energy, Ea) and accompanying growth. The effective activation energies of perovskite transition and growth were found to be 332 ± 11 kJ/mol (345 ± 11 kJ/mol) and 114 ± 10 kJ/mol (122 ± 10 kJ/mol), respectively, for pure amorphous only (and mixed amorphous and pyrochlore) phase following nucleation-growth controlled Avrami's equation. A linear growth rate (n~1) for the perovskite phase indicates predominant interface-controlled process and diffusion-limited phenomena thus inhibiting rosette size owing to reactant depletion and soft impingement at the grain boundary. However, the growth behavior is isotropic in two-dimension parallel to the plane of the substrates for both sample series. Furthermore, lead loss was severe for in-situ growth and RTP combined with conventional furnace annealing than those of RTP only films, which were closer to stoichiometric albeit with excess lead and marginal oxygen vacancies (V o ).

36 MATERIALS SCIENCE↗

Interaction of scandium and titanium atoms with a carbon surface containing five- and seven-membered rings

The use of carbon nanotubes coated by atoms of transition metals to store molecular hydrogen is associated with the problem of the aggregation of these atoms, which leads to the formation of metal clusters. The quantum-chemical simulation of cluster models of the carbon surface of a graphene type with scandium and titanium atoms has been performed. It has been shown that the presence of five- and seven-membered rings, in addition to six-membered rings, in these structures makes it possible to strongly suppress the processes of the migration of metal atoms over the surface, preventing their clustering.

08 HYDROGEN↗

Production of Radioisotopes of Scandium for Imaging and Therapy (Final Report)

This collaborative proposal aims developed techniques for the production of important medical isotopes of scandium; 43Sc, 44Sc, and 47Sc. By leveraging complementary infrastructure available at the three collaborating instructions, we have achieved a robust supply source for these isotopes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A Scandium‐Stabilized Diisophosphaethynolate Ligand: [OCPPCO] 4−

Abstract The first example of the OCPPCO ligand, diisophosphaethynolate, is reported via reductive coupling of a Sc−OCP precursor. Upon reduction with KC 8 , isolation of the dinuclear complex, namely [K(OEt 2 )] 2 [(nacnac)Sc(OAr)] 2 (OCPPCO), is observed, leading to a unique motif [OCPPCO] 4− , stabilized by two scandium centers. Detailed NMR spectra of all complexes as well as IR and single crystal X‐ray studies were obtained to fully elucidate the nature of these complexes in solution as well as in the solid state. Theory is combined to probe the electronic structure and orbitals responsible for the bonding interactions in the Sc−OCPPCO−Sc skeleton but also to compare to the linear mode observed in the precursor.

Grant, Lauren N.↗

Structural properties of scandium inorganic salts

Here, the structural properties of reported inorganic scandium (Sc) salts were reviewed, including the halide (Cl, Br, and I), nitrate, sulfate, and phosphate salts. Additional analytical techniques used for characterization of these complexes (metrical data, FTIR and 45 Sc NMR spectroscopy) were tabulated. A structural comparison of Sc to select lanthanide (La, Gd, Lu) salt complexes was briefly evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Helium Incorporation into Scandium Fluoride, a Model Negative Thermal Expansion Material

Scandium trifluoride is a model negative thermal expansion (NTE) material. Its simple structure can be described as an A-site vacant perovskite, and it shows isotropic NTE over a very wide temperature range (up to ~1100 K), due to transverse vibrational motion of the fluoride. Like many framework NTE materials, it undergoes a phase transition at low pressures, adopting a rhombohedral (R3̅c) structure at >0.7 GPa and 300 K in commonly used nonpenetrating pressure media, such as silicone oil. High pressure X-ray diffraction data and gas uptake/release measurements indicate that, on compression in helium above ~200 K, helium is inserted into ScF 3 to form the defect perovskite He x ScF 3 . The incorporation of helium stiffens the structure and changes its phase behavior. At room temperature, complete filling of the structure with helium does not occur until >1.5 GPa. On compression, a cubic perovskite structure is maintained until ~5 GPa. As the pressure was increased to ~9.5 GPa, a further transition occurred at ~7 GPa. The first transition at ~5 GPa is likely to a tetragonal (P4/mbm) perovskite, but the detailed structure of the perovskite phase formed on compression above ~7 GPa is unclear. Cooling down from 300 to 100 K in helium at ~0.4 GPa leads to an approximate composition of He 0.1 ScF 3 . High pressure neutron diffraction measurements, in the temperature range 15–150 K show that the incorporation of helium increases the pressure at which the cubic (Pm3̅m) to rhombohedral (R3̅c) putative quantum structural phase transition occurs from close to 0 GPa to ~0.2 GPa at 0 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

End-On Bridging Dinitrogen Complex of Scandium

The first (N=N) 2- complex of a rare-earth metal with an end-on dinitrogen bridge, {K(crypt)} 2 {[(R 2 N) 3 Sc] 2 [μ-η 1 :η 1 -n 2 ]} (crypt = 2.2.2-cryptand, R = SiMe 3 ), has been isolated from the reduction of Sc(NR 2 ) 3 under dinitrogen at —35 °C and characterized by X-ray crystallography. The structure differs from the characteristic side-on structures previously observed for over 40 crystallographically-characterized rare-earth metal (N=N) 2- complexes of formula [A 2 Ln(THF) x ] 2 [μ-η 2 :η 2 -N 2 ] (Ln = Sc, Y, and lanthanides; x = 0, 1; A = anionic ligand such as amide, cyclopentadienide, and aryloxide). The 1.221(3) Å N—N distance and the 1644 cm -1 Raman stretch are consistent with the presence of an (N=N) 2- bridge. The observed paramagnetism of the complex by NMR spectroscopy and Evans method measurements is consistent with DFT calculations that suggest a triplet( 3 A 2 ) ground state in D 3 symmetry involving two degenerate Sc—N 2 —Sc bonding orbitals. Upon brief exposure of the orange Sc 3+ bridging dinitrogen complex to UV-light, photolysis to form the monomeric Sc 2+ complex, [K(crypt)][Sc(NR 2 ) 3 ], was observed. Conversion of the Sc 2+ complex to the SO 3+ dinitrogen complex was not observed with this crypt system, but it did occur with the 18-crown-6 (crown) analog which formed {K(crown)} 2 {[(R 2 N) 3 Sc] 2 [μ-η 1 :η 1 -N 2 ]}. This suggests the importance of the alkali metal chelating agent in the reversibility of dinitrogen binding in this scandium system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of N6 and N8 anionic units and 2D polynitrogen layers in high-pressure scandium polynitrides

Abstract Nitrogen catenation under high pressure leads to the formation of polynitrogen compounds with potentially unique properties. The exploration of the entire spectrum of poly- and oligo-nitrogen moieties is still in its earliest stages. Here, we report on four novel scandium nitrides, Sc 2 N 6 , Sc 2 N 8 , ScN 5, and Sc 4 N 3 , synthesized by direct reaction between yttrium and nitrogen at 78-125 GPa and 2500 K in laser-heated diamond anvil cells. High-pressure synchrotron single-crystal X-ray diffraction reveals that in the crystal structures of the nitrogen-rich Sc 2 N 6 , Sc 2 N 8, and ScN 5 phases nitrogen is catenated forming previously unknown N 6 6 − and N 8 6 − units and$${\!\,}_{\infty }{\!\,}^{2}({{{{{\rm{N}}}}}}_{5}^{3-})$$ ∞ 2 ( N 5 3 − ) anionic corrugated 2D-polynitrogen layers consisting of fused N 12 rings. Density functional theory calculations, confirming the dynamical stability of the synthesized compounds, show that Sc 2 N 6 and Sc 2 N 8 possess an anion-driven metallicity, while ScN 5 is an indirect semiconductor. Sc 2 N 6 , Sc 2 N 8 , and ScN 5 solids are promising high-energy-density materials with calculated volumetric energy density, detonation velocity, and detonation pressure higher than those of TNT.

Science & Technology - Other Topics↗

Crystal structure of hydroxy scandium nitrate chloride

Each Sc 3+ ion in the title salt, di-μ-hydroxido-bis[triaqua(nitrato-κ 2 O , O ′)scandium(III)] dichloride, [Sc 2 (NO 3 ) 2 (OH) 2 (H 2 O) 6 ]Cl 2 , is coordinated by a nitrate anion, two hydroxide ions and three water molecules to generate a distorted pentagonal–bipyramidal ScO 7 coordination polyhedron. The complete {[(NO 3 )(μ-OH)Sc(H 2 O) 3 ] 2 } 2+ ion is generated by crystallographic inversion symmetry. The nitrate anion binds in a bidentate fashion whereas the hydroxide ions are bridged between two Sc centers. Two charge-balancing Cl − ions are located in the outer sphere. In the extended structure, O—H...O and O—H...Cl hydrogen bonds connect the components into a three-dimensional network.

Sears, Jeremiah↗

Aluminum-Scandium Alloys: Material Characterization, Friction Stir Welding, and Compatibility With Hydrogen Peroxide (MSFC Center Director's Discretionary Fund Final Report, Proj. No. 04-14)

This Technical Memorandum describes the development of several high-strength aluminum (Al) alloys that are compatible with hydrogen peroxide (H2O2) propellant for NASA Hypersonic-X (Hyper-X) vehicles fuel tanks and structures. The yield strengths for some of these Al-magnesium-based alloys are more than 3 times stronger than the conventional 5254-H112 Al alloy, while maintaining excellent H2O2 compatibility similar to class 1 5254 alloy. The alloy development strategy is to add scandium, zirconium, and other transitional metals with unique electrochemical properties, which will not act as catalysts, to decompose the highly concentrated 90 percent H2O2. Test coupons are machined from sheet metals for H2O2 long-term exposure testing and mechanical properties testing. In addition, the ability to weld the new alloys using friction stir welding has also been explored. The new high-strength alloys could represent an enabling material technology for Hyper-X vehicles, where flight weight reduction is a critical requirement.

Lee, J. A.↗

Improvement in the Shape Memory Response of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy with Scandium Microalloying

A Ti(50.5)Ni(24.5)Pd25 high-temperature shape memory alloy (HTSMA) is microalloyed with 0.5 at. pct scandium (Sc) to enhance its shape-memory characteristics, in particular, dimensional stability under repeated thermomechanical cycles. For both Ti(50.5)Ni(24.5)Pd25 and the Sc-alloyed material, differential scanning calorimetry is conducted for multiple cycles to characterize cyclic stability of the transformation temperatures. The microstructure is evaluated using electron microscopy, X-ray diffractometry, and wavelength dispersive spectroscopy. Isobaric thermal cycling experiments are used to determine transformation temperatures, dimensional stability, and work output as a function of stress. The Sc-doped alloy displays more stable shape memory response with smaller irrecoverable strain and narrower thermal hysteresis than the baseline ternary alloy. This improvement in performance is attributed to the solid solution hardening effect of Sc.

Atli, K. C.↗

RADIOACTIVE SCANDIUM IN THE YOUNGEST GALACTIC SUPERNOVA REMNANT G1.9+0.3

We report the discovery of thermal X-ray emission from the youngest Galactic supernova remnant G1.9+0.3, from a 237 ks Chandra observation. We detect strong K{alpha} lines of Si, S, Ar, Ca, and Fe. In addition, we detect a 4.1 keV line with 99.971% confidence which we attribute to {sup 44}Sc, produced by electron capture from {sup 44}Ti. Combining the data with our earlier Chandra observation allows us to detect the line in two regions independently. For a remnant age of 100 yr, our measured total line strength indicates synthesis of (1-7) x 10{sup -5} M {sub sun} of {sup 44}Ti, in the range predicted for both Type Ia and core-collapse supernovae (SNe), but somewhat smaller than the 2 x 10{sup -4} M {sub sun} reported for Cas A. The line spectrum indicates supersolar abundances. The Fe emission has a width of about 28,000 km s{sup -1}, consistent with an age of {approx}100 yr and with the inferred mean shock velocity of 14,000 km s{sup -1} deduced assuming a distance of 8.5 kpc. Most thermal emission comes from regions of lower X-ray but higher radio surface brightness. Deeper observations should allow more detailed spatial mapping of {sup 44}Sc, with significant implications for models of nucleosynthesis in Type Ia SNe.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced superconductivity of SmFeAsO co-doped by Scandium and Fluorine to increase chemical inner pressure

Sm{sub 1-x/3}Sc{sub x/3}FeAsO{sub 1-x}F{sub x} (x=0.09-0.27) were synthesized by the mechanical alloying and subsequent low temperature rapid sintering (2 h at 950 Degree-Sign C). The superconducting transition temperature (T{sub c}) increased with the doping level of x. The optimal doping achieved a T{sub c} up to 53.5 K in Sm{sub 0.93}Sc{sub 0.07}FeAsO{sub 0.79}F{sub 0.21}. The higher T{sub c} value was attributed to the increased chemical inner pressure from local lattice distortion induced by smaller-size dopants, which was further confirmed by Sm{sub 1-x}Sc{sub x}FeAsO{sub 0.88}F{sub 0.12} (x=0.04, 0.08, 0.12). Accordingly, larger lattice distortion can enhance the superconductivity below the doping limit. Similar phenomenon was also observed in the La{sub 1-x}Y{sub x}FeAsO{sub 0.8}F{sub 0.2} (x=0.4, 0.5, 0.6). - Graphical abstract: The introduction of Sc{sup 3+} and F{sup -} in SmFeAsO leads to higher chemical inner pressure generated by larger lattice distortion, which is the reason of the improved T{sub c}. Highlights: Black-Right-Pointing-Pointer The superconducting properties of Sm{sub 1-x/3}Sc{sub x/3}FeAsO{sub 1-x}F{sub x} are investigated. Black-Right-Pointing-Pointer The co-doping of Sc{sup 3+} and F{sup -} in SmFeAsO leads to higher chemical inner pressure. Black-Right-Pointing-Pointer Higher chemical inner pressure is beneficial to the superconductivity. Black-Right-Pointing-Pointer The co-doped samples of La{sub 1-x}Y{sub x}FeAsO{sub 0.8}F{sub 0.2} further demonstrate the assumption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗