Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rubrene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

65 records · Page 4

High efficiency deep red to yellow photochemical upconversion under solar irradiance

Here, the performance of a perylene monoimide annihilator is evaluated in a photochemical upconversion composition. It is found to perform up to five times better than the commonly employed rubrene annihilator at low excitation intensity, but suffers from a low annihilation singlet yield which hinders its performance under strong excitation. Upconversion action spectroscopy under broadband bias reveals that under one sun illumination, an upconversion composition employing the perylene monoimide utilizes more than 12% of the generated triplet states to generate emissive, excited singlet states. In a suitable medium, this composition could enhance the energy conversion efficiency of high band gap solar cells.

14 SOLAR ENERGY↗

The effect of magnesium added at C{sub 60}/Rubrene heterointerfaces

This study examines the effect of adding magnesium (Mg) at C{sub 60}/rubrene heterointerfaces by using synchrotron-radiation photoemission spectroscopy. The heterointerface was obtained by depositing C{sub 60} on a 4-Å Mg/rubrene surface. The photoemission spectra showed that the added Mg preferentially interacts with and transfers negative charges to C{sub 60}. The interfacial dipole potential was significantly enlarged, as was the separation between the lowest unoccupied molecular orbital of C{sub 60} and the highest occupied molecular orbital of rubrene. The results demonstrate that the addition of Mg should be an effective method for improving the efficiency of light- and current-generating devices.

36 MATERIALS SCIENCE↗

Cesium doping at C{sub 60}/rubrene heterointerfaces for improving the performance of organic light- and current-generating devices

This study examined the effect of adding cesium (Cs) at C{sub 60}/rubrene heterointerfaces by using synchrotron-radiation photoelectron spectroscopy. A C{sub 60}/rubrene heterostructure is the basis of a novel organic dual device found to facilitate efficient integration of both electroluminescent and photovoltaic functions. With Cs doping, the interfacial dipole potential was considerably enlarged, as was the separation between the lowest unoccupied molecular orbital of C{sub 60} and the highest occupied molecular orbital of rubrene. However, the energy-level diagram indicated that a high Cs concentration prevents the formation of photoexcitons. By contrast, adding a small amount of Cs can effectively improve the efficiency of light- and current-generating devices. In particular, the deficiency of the dopants at the heterointerface may benefit the survival of photoexcitons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Excited-state electronic structure of molecules using many-body Green’s functions: Quasiparticles and electron–hole excitations with VOTCA-XTP

Here, we present the open-source VOTCA-XTP software for the calculation of the excited-state electronic structure of molecules using many-body Green’s function theory in the GW approximation with the Bethe–Salpeter equation (BSE). This work provides a summary of the underlying theory and discusses the details of its implementation based on Gaussian orbitals, including resolution-of-identity techniques and different approaches to the frequency integration of the self-energy or acceleration by offloading compute-intensive matrix operations using graphics processing units in a hybrid OpenMP/Cuda scheme. A distinctive feature of VOTCA–XTP is the capability to couple the calculation of electronic excitations to a classical polarizable environment on an atomistic level in a coupled quantum- and molecular-mechanics (QM/MM) scheme, where a complex morphology can be imported from Molecular Dynamics simulations. The capabilities and limitations of the GW–BSE implementation are illustrated with two examples. First, we study the dependence of optically active electron–hole excitations in a series of diketopyrrolopyrrole-based oligomers on molecular-architecture modifications and the number of repeat units. Second, we use the GW–BSE/MM setup to investigate the effect of polarization on localized and intermolecular charge-transfer excited states in morphologies of low-donor content rubrene–fullerene mixtures. These showcases demonstrate that our implementation currently allows us to treat systems with up to 2500 basis functions on regular shared-memory workstations, providing accurate descriptions of quasiparticle and coupled electron–hole excited states of various characters on an equal footing.

74 ATOMIC AND MOLECULAR PHYSICS↗

Efficiency of bulk perovskite-sensitized upconversion: Illuminating matters

Photon upconversion via triplet–triplet annihilation could allow for the existing efficiency limit of single junction solar cells to be surpassed. Indeed, efficient upconversion at subsolar fluences has been realized in bulk perovskite-sensitized systems. Many questions have remained unanswered, in particular, regarding their behavior under photovoltaic operating conditions. Here, we investigate the impact of repeated and continuous illumination on bilayer perovskite/rubrene upconversion devices. We find that variations of the underlying perovskite carrier recombination dynamics greatly impact the upconversion process. Trap filling and triplet sensitization are in direct competition: more saturated trap states in the perovskite and, thus, longer underlying perovskite photoluminescence lifetimes allow for an increased number of carriers to diffuse to the perovskite/rubrene interface and undergo charge extraction to the triplet state of rubrene. As a result, the upconversion efficiency is greatly influenced by the underlying trap density: the upconverted photoluminescence intensity increases by two orders of magnitude under continuous illumination for 4 h. This shows that the upconversion efficiency is difficult to define for this system. Importantly, these results indicate that perovskite-sensitized upconversion devices exhibit peak performance under continuous illumination, which is a requirement for their successful integration into photovoltaics to help overcome the Shockley–Queisser limit in single junction solar cells.

VanOrman, Zachary A. (ORCID:000000027773012X)↗

Mixed halide bulk perovskite triplet sensitizers: Interplay between band alignment, mid-gap traps, and phonons

Photon upconversion, particularly via triplet-triplet annihilation (TTA), could prove beneficial in expanding the efficiencies and overall impacts of optoelectronic devices across a multitude of technologies. The recent development of bulk metal halide perovskites as triplet sensitizers is one potential step toward the industrialization of upconversion-enabled devices. In this work, we investigate the impact of varying additions of bromide into a lead iodide perovskite thin film on the TTA upconversion process in the annihilator molecule rubrene. We find an interplay between the bromide content and the overall device efficiency. In particular, a higher bromide content results in higher internal upconversion efficiencies, enabled by more efficient charge extraction at the interface, likely due to a more favorable band alignment. However, the external upconversion efficiency decreases, as the absorption cross section in the near infrared is reduced. The highest upconversion performance is found in our study for a bromide content of 5%. This result can be traced back to a high absorption cross section in the near infrared and higher photoluminescence quantum yield in comparison to the iodide-only perovskite, as well as an increased driving force for charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting Open Quantum Dynamics with Data-Informed Quantum-Classical Dynamics

We introduce a data-informed quantum-classical dynamics (DIQCD) approach for predicting the evolution of an open quantum system. The equation of motion in DIQCD is a Lindblad equation with a flexible, time-dependent Hamiltonian that can be optimized to fit sparse and noisy data from local observations of an extensive open quantum system. We demonstrate the accuracy and efficiency of DIQCD for both experimental and simulated quantum devices. We show that DIQCD can predict entanglement dynamics of ultracold molecules (calcium fluoride) in optical tweezer arrays. DIQCD also successfully predicts carrier mobility in organic semiconductors (rubrene) with accuracy comparable to nearly exact numerical methods.

Lindblad equation↗

Geminate exciton fusion fluorescence as a probe of triplet exciton transport after singlet fission

The geminate annihilation of two triplet excitons created by singlet exciton fission is affected by the dimensionality of transport as determined by typically anisotropic triplet exciton mobilities in organic molecular crystals. We analyze this process using a random-walk model where the time dynamics of the geminate annihilation probability is determined by the average exciton hopping times along the crystallographic directions. Here, the model is then applied to the geminate fluorescence dynamics in rubrene, where the main channel for triplet-triplet annihilation is via triplet fusion and subsequent photon emission, and we identify the transitions between transport in one, two, and three dimensions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Several steps of lateral gene transfer followed by events of ‘birth-and-death’ evolution shaped a fungal sorbicillinoid biosynthetic gene cluster

Background: Sorbicillinoids are a family of complex cyclic polyketides produced by only a small number of distantly related ascomycete fungi such as Trichoderma (Sordariomycetes) and Penicillium (Eurotiomycetes). In T. reesei, they are synthesized by a gene cluster consisting of eight genes including two polyketide synthases (PKS). To reconstruct the evolutionary origin of this gene cluster, we examined the occurrence of these eight genes in ascomycetes. Results: A cluster comprising at least six of them was only found in Hypocreales (Acremonium chrysogenum, Ustilaginoidea virens, Trichoderma species from section Longibrachiatum) and in Penicillium rubens (Eurotiales). In addition, Colletotrichum graminicola contained the two pks (sor1 and sor2), but not the other sor genes. A. chrysogenum was the evolutionary eldest species in which sor1, sor2, sor3, sor4 and sor6 were present. Sor5 was gained by lateral gene transfer (LGT) from P. rubens. In the younger Hypocreales (U. virens, Trichoderma spp.), the cluster evolved by vertical transfer, but sor2 was lost and regained by LGT from C. graminicola. SorB (=sor2) and sorD (=sor4) were symplesiomorphic in P. rubens, whereas sorA, sorC and sorF were obtained by LGT from A. chrysogenum, and sorE by LGT from Pestalotiopsis fici (Xylariales). The sorbicillinoid gene cluster in Trichoderma section Longibrachiatum is under strong purifying selection. The T. reesei sor genes are expressed during fast vegetative growth, during antagonism of other fungi and regulated by the secondary metabolism regulator LAE1. Conclusions: Our findings pinpoint the evolution of the fungal sorbicillinoid biosynthesis gene cluster. The core cluster arose in early Hypocreales, and was complemented by LGT. During further speciation in the Hypocreales, it became subject to birth and death evolution in selected lineages. In P. rubrens (Eurotiales), two cluster genes were symplesiomorphic, and the whole cluster formed by LGT from at least two different fungal donors.

59 BASIC BIOLOGICAL SCIENCES↗

Basic surface chemistry and physics of carbon-based electronic materials modified by silane molecular layers

The scope of this project is to investigate fundamental aspects of self-assembled monolayers (SAMs) grown at the surface of organic semiconductors and other electronic materials, recently discovered in our group. Understanding the growth mechanism and structure of these SAMs, as well as investigating the effect of SAM-induced high surface conductivity, are the main thrusts of the project. An additional thrust of the project is to find new ways of surface doping or surface gating of novel semiconductors, in which electronic traps at the interface would be passivated. Molecular self assembly is an exciting research area of modern materials science, playing an important role in a variety of emerging applications, such as organic and molecular electronics, bioengineering, sensors and actuators. The current effort in this field has been focused on two experimental platforms: SAMs on metals (e.g., Au) and SAMs on inorganic oxides (e.g., SiO 2 ). We have recently discovered the third platform, molecular self-assembly at the surface of carbon-based electronic materials (organic semiconductors, graphene and CNTs), which opens new opportunities for fundamental research and applications. One of the most intriguing aspects of the new discovery is that formation of an FTS self-assembled monolayer on these materials induces a high-density mobile charges, with n up to 1014 cm-2, resulting in a large surface conductivity, σ ≈ 10-5 S·square-1. The effect is due to an interfacial electron transfer from the semiconductor to the SAM, resulting in a 0.54 V potential drop across the 1.3 nm-thick SAM, as recently revealed by Kelvin probe microscopy in rubrene.

36 MATERIALS SCIENCE↗

Simplified ozone detection by chemiluminescence

Ozone is detected by film coated with solid, such as rubrene, that reacts with ozone to degree proportional to concentration in sample gas. Gas flow is stopped, and film is heated to produce light (chemiluminescence) in proportion to amount of reacted material on sensor.

Conway, E. J.↗