SEARCH · Engineering Papers

Results for “Rotorcraft Conceptual Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2020

Mars Science Helicopter Conceptual Design

Robotic planetary aerial vehicles increase the range of terrain that can be examined, compared to traditional landers and rovers, and have more near-surface capability than orbiters. Aerial mobility is a promising possibility for planetary exploration as it reduces the challenges that difficult obstacles pose to ground vehicles. The first use of a rotorcraft for a planetary mission will be in 2021, when the Mars Helicopter technology demonstrator will be deployed from the Mars 2020 rover. The Jet Propulsion Laboratory and NASA Ames Research Center are exploring possibilities for a Mars Science Helicopter, a second-generation Mars rotorcraft with the capability of conducting science investigations independently of a lander or rover (although this type of vehicle could also be used assist rovers or landers in future missions). This report describes the conceptual design of Mars Science Helicopters. The design process began with coaxial-helicopter and hexacopter configurations, with a payload in the range of two to three kg and an overall vehicle mass of approximately twenty kg. Initial estimates of weight and performance were based on the capabilities of the Mars Helicopter. Rotorcraft designs for Mars are constrained by the dimensions of the aeroshell and lander for the trip to the planet, requiring attention to the aircraft packaging in order to maximize the rotor dimensions and hence overall performance potential. Aerodynamic performance optimization was conducted, particularly through airfoils designed specifically for the low Reynolds number and high Mach number inherent to operation on Mars. Rotor structural designs were developed that met blade frequency and weight targets, subject to material stress limits. The final designs show a substantial capability for science operations on Mars: a 31 kg hexacopter that fits within a 2.5 m diameter aeroshell could carry a 5 kg payload for 10 min of hover time or over a range of 5 km.

Wayne Johnson↗

NASA NTRS2009

NASA Subsonic Rotary Wing Project

This slide presentation will outline the rationale for, and the initial results of, a contractor study being performed by a SAIC-led team of Bell Helicopter Textron, Sensis, and Optimal Synthesis. Together, this team represents an extensive body of subject matter expertise as related to rotorcraft technologies and design, airspace demand modeling simulation, and terminal area operations and flight path planning. The initial conceptual design results of a fleet of civil tiltrotor aircraft ranging in size from 10 to 120 passengers is a key highlight of the work to be presented. The intent of this presentation is to begin to provide the general community of rotorcraft researchers, manufacturers, and end-users an appreciation of the criticality of interjecting rotorcraft-specific technology and concepts of operation issues into Next Gen airspace requirements

Young, Larry A.↗

NASA NTRSDate not supplied

Mechanical Design of the Urban Air Mobility Side-by-Side Test Stand

The Urban Air Mobility Side-by-Side Test Stand (SBS) is a new capability for the National Aeronautics and Space Administration (NASA) to test the conceptual side-by-side rotorcraft configuration. This test stand enhances the experimental capabilities of the Revolutionary Vertical Lift Technology (RVLT) Project and is primarily designed to be tested in the U.S. Army’s 7-by 10-Foot Wind Tunnel at NASA Ames Research Center. One of the goals for the SBS is to identify the optimal degree of rotor overlap that will yield the best aerodynamic performance. The SBS has two counter-rotating, intermeshing rotors that can vary in lateral separation. The test stand can pitch nose up and nose down, with each rotor having the capability to be trimmed independently through cyclic and collective controls. Six-axis load cells and rotary torque sensors are placed underneath each rotor to measure the thrust, torque, and side force from each rotor system. This paper describes the mechanical design of the SBS and outlines the structural analyses conducted to ensure a safety factor of 4 for ultimate strength and 3 for yield strength during all experimental testing.

Mechanical Design↗

NASA NTRS1980

Conceptual design study for an advanced cab and visual system, volume 1

A conceptual design study was conducted to define requirements for an advanced cab and visual system. The rotorcraft system integration simulator is for engineering studies in the area of mission associated vehicle handling qualities. Principally a technology survey and assessment of existing and proposed simulator visual display systems, image generation systems, modular cab designs, and simulator control station designs were performed and are discussed. State of the art survey data were used to synthesize a set of preliminary visual display system concepts of which five candidate display configurations were selected for further evaluation. Basic display concepts incorporated in these configurations included: real image projection, using either periscopes, fiber optic bundles, or scanned laser optics; and virtual imaging with helmet mounted displays. These display concepts were integrated in the study with a simulator cab concept employing a modular base for aircraft controls, crew seating, and instrumentation (or other) displays. A simple concept to induce vibration in the various modules was developed and is described. Results of evaluations and trade offs related to the candidate system concepts are given, along with a suggested weighting scheme for numerically comparing visual system performance characteristics.

Rue, R. J.↗

NASA NTRSDate not supplied

High-Fidelity Computational Analysis Of Nasa’s Air Taxi Concepts

High-fidelity Computational Fluid Dynamics (CFD) simulations have been carried out for NASA’s air taxi concepts. The high-fidelity approach uses high-order accurate schemes and dual-time stepping, which simulates the rotor with its individual rotating blade grids. The delayed detached-eddy simulation model has been employed. A loose-coupling approach between the flow solver and a rotorcraft comprehensive code is utilized to include vehicle trim and motion variables.NASA’s air taxi conceptual designs are intended to focus and guide NASA’s research activities in support of aircraft development for vertical take-off and landing air taxi operations

ARMD↗

NASA NTRSDate not supplied

Airfoil Table Generation and Validation for the VR-12 and SSC-A09 Airfoils and Quadrotor Performance Prediction

As part of NASA’s Urban Air Mobility (UAM) mission, the Revolutionary Vertical Lift Technology (RVLT) project is creating rotorcraft reference designs that can be used by the rotorcraft community to develop quiet, efficient, and safer air vehicles. At NASA, this effort is made possible by the use of the RVLT toolchain software. Airfoil tables are often a critical part of the conceptual design process as they inform both comprehensive analysis and Computational Fluid Dynamics (CFD) codes of 2D aerodynamic coefficients, such as lift, drag, and moment coefficients. These airfoil tables, typically generated during experimental testing, are often proprietary and thus not widely distributable; further, there is not always clear or available reference documentation that provides information on the test conditions. The airfoil tables from these experiments are referred to in this work as Legacy airfoil tables. The scope of this study is to generate airfoil tables with the NASA OVERset grid CFD FLOW solver (OVERFLOW) coupled with the AirFoil Table Generator (AFTGen) software and validate these airfoil tables based on performance predictions calculated in Comprehensive Hierarchical Aeromechanics Rotorcraft Model (CHARM). The overall goal is to provide CFD generated airfoil tables, validate them through comprehensive analysis, and publish the airfoil tables for public distribution. The RVLT quadrotor reference model was selected as the basis for all analyses. The quadrotor uses the VR-12 and SSC-A09 airfoils for its rotor blades. Simulations were run in OVERFLOW for the VR-12 and SSC-A09 airfoils for ±20° angles of attack, Mach numbers from 0.3 to 1.0, and a Reynolds-Mach proportionality constant of 1.023x107. The C81 format airfoil tables from AFTGen were then blended with Legacy NACA 0012 airfoil table data for ±20° to ±180° angle of attack range. CHARM was used to compute thrust coefficient, power coefficient, and figure of merit for an isolated rotor in hover using proprietary legacy airfoil tables for the VR-12 and SSC-A09, as well as with the OVERFLOW generated airfoil tables for the VR-12 and SSC-A09. Overall, the OVERFLOW and Legacy performance predictions agreed well, with the best correlation between simulated and Legacy data observed with the VR-12 airfoil tables.

Airfoil↗

NASA NTRS2019

Load Flow Analysis with Analytic Derivatives for Electric Aircraft Design Optimization

Many of the aircraft concepts of the future are exploring the use of hybrid-, turbo- or all-electric propulsion systems to improve performance and decrease environmental impacts. These aircraft concepts range from small rotorcraft for urban air mobility to conventional commercial transports to large blended wing body designs. Developing the conceptual design for these vehicles presents a challenge, however, as traditional aircraft design tools often were not developed to handle these unique propulsion system architectures. Previous studies on these vehicles have therefore relied on relatively simple models of the electrical transmission and distribution system. This paper presents the development of a hybrid AC-DC load flow (or power flow) analysis capability to enhance the conceptual design of these concept vehicles. Specifically, the desire was to create a load flow analysis capability within the OpenMDAO framework that is also being used to develop a set of compatible tools for rapid optimization of conceptual designs. This load flow analysis capability is unique in its flexible object-oriented structure and implementation of analytic derivatives to facilitate the use of solvers and gradient based optimization in the design process. The developed hybrid load flow analysis capability is first verified against a published 13-bus example then used to model the electrical distribution system for a turbo-electric tiltwing aircraft.

Load flow↗

NASA NTRSDate not supplied

Aircraft Design Implications for Urban Air Mobility Vehicles Performing Public Good Missions

NASA has previously designed and described set of concept aircraft to serve as reference vehicles for Urban Air Mobility (UAM), to encourage public discussion and research. These vehicles are used in this paper to quantify how suitable UAM aircraft might be for missions other than their primary commercial design missions. A set of representative public good missions are described, along with design requirements and equipage. For two of these missions, the additional weight, power, and cost to facilitate a basic vehicle which may be built or configured with the ability to perform these missions is quantified. Special layout and other considerations which may impact vehicle design are described. For aircraft designed to the NASA UAM reference mission, the addition of some meaningful public good missions causes less than 10% growth in weight and power for fossil-fueled aircraft; advanced batteryelectric powered aircraft grow by a significantly larger amount and may only be possible with relaxed requirements. Meaningful public good missions with UAM vehicles are feasible, provided that public good mission requirements are considered and incorporated in the conceptual design stage of development.

Aircraft↗

NASA NTRS2016

Computational Study of Flow Interactions in Coaxial Rotors

Although the first idea of coaxial rotors appeared more than 150 years ago, most helicopters have used single main-rotor/tail-rotor combination. Since reactive moments of coaxial rotors are canceled by contra-rotation, no tail rotor is required to counter the torque generated by the main rotor. Unlike the single main rotor design that distributes power to both main and tail rotors, all of the power for coaxial rotors is used for vertical thrust. Thus, no power is wasted for anti-torque or directional control. The saved power helps coaxial rotors reach a higher hover ceiling than single rotor helicopters. Another advantage of coaxial rotors is that the overall rotor diameter can be reduced for a given vehicle gross weight because each rotor provides a maximum contribution to vertical thrust to overcome vehicle weight. However, increased mechanical complexity of the hub has been one of the challenges for manufacturing coaxial rotorcraft. Only the Kamov Design Bureau of Russia had been notably successful in production of coaxial helicopters until Sikorsky built X2, an experimental compound helicopter. Recent developments in unmanned aircraft systems and high-speed rotorcraft have renewed interest in the coaxial configuration. Multi-rotors are frequently used for small electric unmanned rotorcraft partly due to mechanical simplicity. The use of multiple motors provides redundancy as well as cost-efficiency. The multi-rotor concept has rarely been used until recently because of its inherent stability and control problems. However, advances in inexpensive electronic flight control systems have opened the floodgates for small drones using multirotors. Coaxial rotors have started to appear in some multi-rotor configurations. Small coaxial rotors have often been designed using a hundred year old approach that is "sketch, build, fly, and iterate." In that approach, there is no systematic way to explore trade-offs or determine logical next steps. It is neither possible to account for multiple real-world constraints up front in design nor possible to know what performance is possible with a given design. Since unmanned vehicles are sized and optimized for the particular mission, a modern low-fidelity conceptual design and sizing tool that has been used for the design of large helicopters can be used for design of small coaxial rotorcraft. However, unlike most helicopters with single main rotor, the interactions between the upper and lower rotors emerge as an important factor to consider in design because an increase in performance of a multi-rotor system is not proportional to the number of rotors. Interference losses and differences in thrusts between the upper and lower rotors were investigated by theoretical methods as well as a computational fluid dynamics (CFD) method using the Reynolds-Averaged Navier-Stokes (RANS) equations. In this work, hybrid turbulence models are used to investigate the physics of interactions between coaxial rotors and a fuselage that are not well understood. Present study covers not only small-scale drones but also large-scale coaxial rotors for heavy-lifting missions. Considering the recently proposed FAA drone rules that require the flight only in visual line-of-sight, a large multirotor might be used as an airborne carrier for launch and recovery of unmanned aircraft systems with a human operator onboard. For applications to civil operations, their aerodynamic performance and noise levels need to be assessed. Noise is one of the largest limiting factors to rotorcraft operations in urban area. Since the high-frequency noise of multi-rotors may increase the annoyance, noise may turn out to be a key issue that must be addressed for market acceptability. One of the objectives of the present work is to study the effects of inter-rotor spacing and collectives on the performance, efficiency, and acoustics of coaxial rotor systems.

Study↗

NASA NTRSDate not supplied

PlanetarY Telemetric Helicopter for Investigation and Analysis (PYTHIA): A Rotorcraft for Martian Lava Tube Exploration

The PlanetarY Telemetric Helicopter for Investigation and Analysis (PYTHIA) project presents an early feasibility study into future Mars rotorcraft. With the success of Ingenuity and the current development of the Mars Sample Retrieval Helicopters, there is motivation to explore additional vehicle concepts for Mars exploration. This work presents an early conceptual design of a lava tube exploring quadrotor. The nominal mission for the PYTHIA quadrotor includes a two-phase in-depth exploration of one or mutliple lava tubes in the area of interest, Arsia Mons. A sizing analysis was completed using the NASA Design and Analysis of Rotorcraft (NDARC) tool. An eight-bladed quadrotor was selected based on the NDARC sizing sweeps. With preliminary vehicle and blade sizing completed, a flow visualization study was conducted. Two simulations were completed in Rotorcraft Computational Fluid Dynamics (RotCFD): one of the quadrotor alone and another in a lava tube. This paper introduces a baseline reference mission, preliminary vehicle design, and initial sizing analysis of a rotorcraft to explore Martian lava tubes.

PlanetarY↗

NASA NTRS2008

Aircraft System Analysis of Technology Benefits to Civil Transport Rotorcraft

An aircraft systems analysis was conducted to evaluate the net benefits of advanced technologies on two conceptual civil transport rotorcraft, to quantify the potential of future civil rotorcraft to become operationally viable and economically competitive, with the ultimate goal of alleviating congestion in our airways, runways and terminals. These questions are three of many that must be resolved for the successful introduction of civil transport rotorcraft: 1) Can civil transport rotorcraft actually relieve current airport congestion and improve overall air traffic and passenger throughput at busy hub airports? What is that operational scenario? 2) Can advanced technology make future civil rotorcraft economically competitive in scheduled passenger transport? What are those enabling technologies? 3) What level of investment is necessary to mature the key enabling technologies? This study addresses the first two questions, and several others, by applying a systems analysis approach to a broad spectrum of potential advanced technologies at a conceptual level of design. The method was to identify those advanced technologies that showed the most promise and to quantify their benefits to the design, development, production, and operation of future civil rotorcraft. Adjustments are made to sizing data by subject matter experts to reflect the introduction of new technologies that offer improved performance, reduced weight, reduced maintenance, or reduced cost. This study used projected benefits from new, advanced technologies, generally based on research results, analysis, or small-scale test data. The technologies are identified, categorized and quantified in the report. The net benefit of selected advanced technologies is quantified for two civil transport rotorcraft concepts, a Single Main Rotor Compound (SMRC) helicopter designed for 250 ktas cruise airspeed and a Civil Tilt Rotor (CTR) designed for 350 ktas cruise airspeed. A baseline design of each concept was sized for a representative civil passenger transport mission, using current technology. Individual advanced technologies are quantified and applied to resize the aircraft, thereby quantifying the net benefit of that technology to the rotorcraft. Estimates of development cost, production cost and operating and support costs are made with a commercial cost estimating program, calibrated to Boeing products with adjustments for future civil production processes. A cost metric of cash direct operating cost per available seat-mile (DOC ASM) is used to compare the cost benefit of the technologies. The same metric is used to compare results with turboprop operating costs. Reduced engine SFC was the most advantageous advanced technology for both rotorcraft concepts. Structural weight reduction was the second most beneficial technology, followed by advanced drive systems and then by technology for rotorcraft performance. Most of the technologies evaluated in this report should apply similarly to conventional helicopters. The implicit assumption is that resources will become available to mature the technologies for fullscale production aircraft. That assumption is certainly the weak link in any forecast of future possibilities. The analysis serves the purpose of identifying which technologies offer the most potential benefit, and thus the ones that should receive the highest priority for continued development. This study directly addressed the following NASA Subsonic Rotary Wing (SRW) subtopics: SR W.4.8.I.J Establish capability for rotorcraft system analysis and SRW. 4.8.I.4 Conduct limited technology benefit assessment on baseline rotorcraft configurations.

Wilkerson, Joseph B.↗

NASA NTRS1980

Conceptual design study for an advanced cab and visual system, volume 2

The performance, design, construction and testing requirements are defined for developing an advanced cab and visual system. The rotorcraft system integration simulator is composed of the advanced cab and visual system and the rotorcraft system motion generator, and is part of an existing simulation facility. User's applications for the simulator include rotorcraft design development, product improvement, threat assessment, and accident investigation.

Rue, R. J.↗

NASA NTRS2017

Greased Lightning (GL-10) Performance Flight Research: Flight Data Report

Modern aircraft design methods have produced acceptable designs for large conventional aircraft performance. With revolutionary electronic propulsion technologies fueled by the growth in the small UAS (Unmanned Aerial Systems) industry, these same prediction models are being applied to new smaller, and experimental design concepts requiring a VTOL (Vertical Take Off and Landing) capability for ODM (On Demand Mobility). A 50% sub-scale GL-10 flight model was built and tested to demonstrate the transition from hover to forward flight utilizing DEP (Distributed Electric Propulsion)[1][2]. In 2016 plans were put in place to conduct performance flight testing on the 50% sub-scale GL-10 flight model to support a NASA project called DELIVER (Design Environment for Novel Vertical Lift Vehicles). DELIVER was investigating the feasibility of including smaller and more experimental aircraft configurations into a NASA design tool called NDARC (NASA Design and Analysis of Rotorcraft)[3]. This report covers the performance flight data collected during flight testing of the GL-10 50% sub-scale flight model conducted at Beaver Dam Airpark, VA. Overall the flight test data provides great insight into how well our existing conceptual design tools predict the performance of small scale experimental DEP concepts. Low fidelity conceptual design tools estimated the (L/D)( sub max)of the GL-10 50% sub-scale flight model to be 16. Experimentally measured (L/D)( sub max) for the GL-10 50% scale flight model was 7.2. The aerodynamic performance predicted versus measured highlights the complexity of wing and nacelle interactions which is not currently accounted for in existing low fidelity tools.

McSwain, Robert G.↗

NASA NTRSDate not supplied

Multi-Fidelity Computational Analysis of a Quiet Single-Main Rotor Helicopter for Air Taxi Operations

A multi-fidelity computational study has been conducted on NASA’s quiet single-main rotor helicopter concept for urban air mobility using computational fluid dynamics and rotorcraft comprehensive analysis tools. Two approaches have been followed in order to simulate the rotor flows: (1) a rotor disk model, which models the rotors as source terms, and (2) a high-fidelity approach using high-order accurate schemes and dual-time stepping, which simulates the rotor with its individual rotating blade grids. The delayed detached-eddy simulation model has been employed. A loose-coupling approach between the flow solver and a rotorcraft comprehensive code is utilized to include vehicle trim and motion variables. The quiet single-main rotor helicopter is one of the conceptual designs intended to focus and guide NASA’s research activities in support of aircraft development for vertical take-off and landing air taxi operations.

RVLT↗

NASA NTRS2005

Function Based Risk Assessment: Mapping Function to Likelihood

The concept of function offers a high potential for thinking and reasoning about designs as well as providing a common thread for relating together other design information. This paper focuses specifically on the relation between function and risk by presenting a mathematical mapping from product function to risk likelihood. This risk information is composed of design parameters, failure modes, and likelihood values. A spacecraft orientation subsystem, subsystem used to guide science instruments, and a Bell 206 rotorcraft are used to test the mapping which continues research on these products relating function to failure. Finally, a case study is presented in which the risk element likelihood is calculated for a fuel cell which is in the conceptual design phase at NASA JPL.

Tumer, Irem Y.↗

NASA NTRSDate not supplied

Integrated Handling Qualities Safety Analysis For Conceptual Design of Urban Air Mobility Vehicles

The recent emergence of distributed electric propulsion Vertical Takeoff and Landing (VTOL) aircraft has created a rapid introduction of new design concepts with unique stability and control characteristics. A challenge to realizing the full potential of these vehicles for urban transportation is to gain public acceptance which is largely driven by flight safety. This paper describes ongoing research to address the feasibility of integrating flying qualities safety metrics into conceptual design of VTOL Urban Air Mobility (UAM) vehicles. The discussion is composed of the approach and progress toward a toolbox that integrates with existing NASA rotorcraft design software and processes. Several key challenges are highlighted including modeling requirements for failures, identification of critical failures, and capturing critical failures, with robustness to model uncertainty. A discussion of requirements for safety metrics, specific to UAM vehicles, as well as the effects of the control system design is also included. Results to date have demonstrated the degradation in flying qualities metrics due to propulsion failures.

George Altamirano↗

NASA NTRS1984

Applications of numerical optimization methods to helicopter design problems: A survey

A survey of applications of mathematical programming methods is used to improve the design of helicopters and their components. Applications of multivariable search techniques in the finite dimensional space are considered. Five categories of helicopter design problems are considered: (1) conceptual and preliminary design, (2) rotor-system design, (3) airframe structures design, (4) control system design, and (5) flight trajectory planning. Key technical progress in numerical optimization methods relevant to rotorcraft applications are summarized.

Miura, H.↗

NASA NTRS1985

Applications of numerical optimization methods to helicopter design problems - A survey

Miura, H.↗