Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rietveld”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhanced steam oxidation resistance of uranium nitride nuclear fuel pellets

Here, the steam oxidation resistance of UN and UN-(20 vol%)ZrN fuel pellets is evaluated to enhance understanding of steam corrosion mechanisms in advanced nuclear fuel materials. In situ neutron diffraction shows the modified UN fuel pellets form a (U 0.77 ,Zr 0.23 )N solid-solution and the sole crystalline oxidation product detected in bulk is (U 0.77 ,Zr 0.23 )O 2 . U 2 N 3 is not detected in significant quantities during the steam oxidation of UN or (U 0.77 ,Zr 0.23 )N and stable lattice parameters show that hydriding does not take place. Steam oxidation rates, obtained via sequential Rietveld refinement show how (U 0.77 ,Zr 0.23 )N has a higher activation energy (79 ± 1 kJmol -1 vs. 50 ± 5 kJmol -1 ), higher onset temperature (430 °C vs. 400 °C) and slower reaction rates for steam oxidation up to 616 °C, than pure UN. Throughout, both UN and (U 0.77 ,Zr 0.23 )N exhibit linear (non-protective) oxidation kinetics, signifying that degradation of the fuel pellets is caused by the evolution of gaseous products at the interface followed by oxide scale spallation. This quantitative and mechanistic understanding of material degradation enables better defined operating regimes and points towards (U,Zr)N solid solutions as a promising strategy for the design of advanced nuclear fuel materials with enhanced steam corrosion resistance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Stepwise allomorphic transformations by alkaline and ethylenediamine treatments on bamboo crystalline cellulose for enhanced enzymatic digestibility

Efficient modification and decrystallization of cellulose Iβ in lignocellulosic biomass are potential ways to overcome biomass recalcitrance and facilitates enzymatic degradation. Herein, we have treated moso bamboo and microcrystalline cellulose separately by either alkali or ethylenediamine (EDA) treatments, as well as using both in succession. The pretreatments successfully transformed the initial cellulose Iβ allomorph into cellulose II, III I , and cellulose III II . Crystal structures and crystallinities were determined by Rietveld X-ray diffraction and CP/MAS 13 C NMR. Comparatively, the samples that were sequentially treated by EDA and NaOH had low crystallinity (~50%), larger d-spacings of ~4.4 Å for the hydrophobic (110) planes, and less condensed microfibrillar aggregation. The factors simultaneously contributed to as high enzymatic hydrolysis yield as 89.5% and 91.7% respectively, followed by the yields of mercerized cellulose II and cellulose III II allomorph. Here, the stepwise allomorphic transformations may provide new strategies on improving efficiency of saccharification process and biomass utilization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Thermal Processing Conditions for the Synthesis of Near Theoretical Density Li 5 La 3 Ta 2 O 12 Ceramics for Ceramic Dual-Mode Detectors

A family of Li-containing garnet compounds, extensively investigated for Li-ion solid electrolyte applications, show great potential to be developed into transparent ceramic dual-mode scintillators. In particular, Li 5 La 3 Ta 2 O 12 (LLTaO) shows promise as an efficient dual-mode scintillator due to its high Li content, high density, non-hygroscopicity, and high effective-Z. Often the synthesis of LLTaO ceramics involves solid state processing techniques starting with oxide and carbonate powders, calcining, sintering for the removal of residual porosity, and post-processing. This study focuses on two objectives: (1) establishing thermal processing boundary conditions for a flexible alkoxide-based sol-gel method for synthesizing fine-grained powders; and (2), consolidating powders via hot-pressing to form high-density ceramics. In this study, near single-phase ceramics were achieved by hot-pressing sol-gel powders with varying amounts of excess Li. Rietveld refinements were used to analyze X-ray diffraction data and provide a quantitative evaluation of the phases present in the hot pressed ceramics. Some of the diffraction data showed large low angle peak asymmetry, suggesting the presence of two cubic Li 5 La 3 Ta 2 O 12 garnet phases with different lattice parameters. Depending on the synthesis and processing conditions, the refinement revealed ~ 90 wt% concentration of a phase with a ≈ 12.8 Å and ~ 10 wt% concentration of a phase with a ≈ 12.9 Å, indicating a remaining excess of Li in the hot pressed ceramics in the large lattice parameter phase. These synthesis experiments allowed for the determination of a baseline for Li loss during hot-pressing. X-ray excited radioluminescence and photoluminescence excitation and emission spectra were obtained from the hot pressed ceramics. In conclusion, the measured emission spectra featured broad tantalate emission and line emissions likely from a rare-earth impurity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis, structure, linear and nonlinear optical properties of noncentrosymmetric quaternary diamond-like semiconductors, Cu 2 ZnGeSe 4 (CZGSe) and the novel Cu 4 ZnGe 2 Se 7

In this work, two quaternary diamond-like semiconductors (DLSs) in the Cu-Zn-Ge-Se system, the known Cu 2 ZnGeSe 4 (also referred to as CZGSe) and the new Cu 4 ZnGe 2 Se 7 , are compared in terms of their crystal structures, electronic structures and physicochemical properties. Both compounds were prepared by high-temperature, solid-state synthesis at 800 degrees C. Single crystal X-ray diffraction was used to determine the structure of Cu 4 ZnGe 2 Se 7 . The structures of both Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 can be considered as derivatives of cubic diamond. Cu 4 ZnGe 2 Se 7 , with a reduced symmetry due to the cation ordering pattern, adopts the Cu 4 NiSi 2 S 7 structure type, with space group C2. The corner-sharing tetrahedra in Cu 4 ZnGe 2 Se 7 are slightly distorted because the charge for some of the S 2 - anions is not compensated by the first-nearest-neighbor cations. Rietveld refinements using synchrotron X-ray powder diffraction data were used to assess the phase purity of the samples and confirm the bulk structural behavior. Diffuse reflectance UV/Vis/NIR spectroscopy shows that Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 have direct optical bandgaps of 1.38 and 0.91 eV, respectively. Electronic structure calculations implementing density functional theory confirm the direct bandgap for Cu 4 ZnGe 2 Se 7 , with a calculated value of 0.62 eV. Both compounds are air stable, thermally stable up to relatively high temperatures, undergo phase transitions and have wide windows of optical clarity. The Kurtz-Perry powder technique was used to determine the second harmonic generation (SHG) responses using a commercial AgGaSe 2 standard. While Cu 4 ZnGe 2 Se 7 displays a weak SHG response, Cu 2 ZnGeSe 4 exhibits a response that is greater than several benchmark materials, with a large SHG coefficient, χ (2) , of 43 ± 6 pm/V at λ = 2900 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thin film combinatorial sputtering of Al-Ce alloys: Investigating the phase separation of as-deposited solid solutions and determining the coefficient of thermal expansion

Al x Ce 100–x thin films with a composition range of ~75.0 < x < 99.5 at% (36.5 < x < 97.5 wt%) were synthesized via combinatorial co-sputtering from an Al and an Al 50 Ce 50 target. The crystal structure, phase fraction, film morphology, electrical resistivity, and temperature-dependent coefficients of thermal expansion (CTE) are all correlated to the Al x Ce 100–x composition. The as-deposited films form a metastable solid-solution, and annealing leads to the formation of the thermodynamically stable two-phase system of Al and the α-Al 11 Ce 3 intermetallic. Temperature dependent x-ray diffraction (XRD) reveals that the two phases expand independently of one another, and the thin film Al temperature-dependent CTE is similar to bulk Al. The thin film Al 11 Ce 3 intermetallic phase has a nearly constant CTE of ~1.5 × 10 –5 /°C within the temperature range studied (25–550 °C). To confirm the thin film Al 11 Ce 3 results, bulk stoichiometric Al 11 Ce 3 and +/- 1 wt% Ce samples were prepared and the CTE of each was measured with the same conditions. A Rietveld analysis of the bulk data enabled an estimation of the CTE in each of the 3 orthorhombic lattice parameters, which displayed anisotropic behavior. The thin film and bulk CTE measurements were in very good agreement. Estimations of the temperature dependent CTE of the two-phase alloys are made via the Reuss and Voigt models. Finally, by demonstrating the efficacy of the approach, more complex multi-component rapid materials discovery of low CTE Al-alloys can be pursued via the combinatorial thin film synthesis and XRD measurement.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tetragonal structure and uniaxial magnetic anisotropy in the arc-melted (Ce,Zr) 2 (Fe,M) 17 (M = Mo, W, Co) alloys

The tetragonal ThMn 12 -type structure is stabilized in (Ce 1-x Zr x ) 2 T 16 M (x = 0.2 – 0.3; T = Fe or Fe/Co, M = Mo or W) arc-melted alloys. Approximately 5 at% of Mo or W admixture is sufficient to transform the hexagonal Th 2 Ni 17 -type structure of (Ce 1-x Zr x ) 2 Fe 17 into the tetragonal ThMn 12 -type structure of nearly single-phase (Ce 1-x Zr x ) 2 Fe 16 M and/or (Ce 1-x Zr x ) 2 Fe 15 CoM bulk alloys. X-ray Rietveld refinements reveal that Zr and Mo (W) substitute different sites in the tetragonal crystal structure. Zirconium preferentially replaces Ce, whereas Mo (W) substitutes Fe. At room temperature, the tetragonal phases exhibit strong ferromagnetism and a uniaxial magneto-crystalline anisotropy with anisotropy fields of 15 – 17 kOe. These materials possess room-temperature saturation magnetizations of 95 – 105 emu/g and Curie temperature of 420 – 505 K. At some concentrations, concurrent Zr and Mo (W) site occupancy facilitates 1:12 structure formation in bulk alloys with minimal presence of non-magnetic element in the Fe sublattice, thus securing the highest known magnetic moment per Fe atom (∼ 1.37 µ B ) in this type of materials. The intrinsic magnetic characteristics, as well as the absence of critical rare earths (RE), make these compounds interesting for development as low-cost permanent magnets. In conclusion, small Co additions improve the Curie temperature, especially if combined with W.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Role of washing solvents in defining the magnetic performance of Sm 2 Fe 17 N 3 obtained by reduction diffusion

Calciothermic reduction-diffusion (RD) is one of the leading synthesis methods for Sm 2 Fe 17 N 3 (SmFeN), but sintering of such RD-derived powders is hampered by oxidation and CaO byproducts. Here, we systematically evaluate how post-synthesis washing solvents govern powder chemistry and magnetic performance. RD-synthesized SmFeN powder was washed with several aqueous and non-aqueous solvents using identical washing protocols. This was followed by an assessment of both the as-washed powder as well as after annealing at 425 °C. Phase content was quantified by synchrotron PXRD and Rietveld refinement and SEM/EDS. The oxygen content of the powders was determined via inert gas fusion and the magnetization by DC magnetometry. While all aqueous-based solutions were able to remove CaO, the non-aqueous solutions were only effective with extended washing times. Prior to annealing, the crystalline phases and magnetic properties of the as-washed powders were largely the same regardless of washing solvent. However, differences emerge after annealing, where water-based washing markedly lowers the coercivity (H c ~3.8-4.3 kOe). In contrast, non-aqueous NH 4 Cl-methanol washing protocols were more effective in preserving coercivity (H c ~4.9-5.9 kOe). We attribute this to lower oxygen content in the non-aqueous samples (~9,400 ppm v ~6,400 ppm, respectively) which in turn reduced the formation of α-Fe during annealing. These results highlight the importance of solvent choice in washing RD-synthesized SmFeN and demonstrate that non-aqueous protocols, which better limit oxidation, outperform aqueous solvents despite the need for longer washing times.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Comparative investigation of Ga- and In-CHA in the non-oxidative ethane dehydrogenation reaction

Ga- and In-exchanged chabazite (CHA) zeolites with same Si/Al and metal/Al ratios were prepared via the incipient wetness impregnation method, were characterized using N 2 adsorption, electron microscopy, temperature-programed reactions and were evaluated for the ethane dehydrogenation reaction using flow microreactors. Ga-CHA has higher reaction rates and a lower activation energy of 107 kJ/mol than In-CHA (E a = 175 kJ/mol). Rietveld refinement of the X-ray powder diffraction pattern shows that the In + cation is predominantly located above the 6-ring of the CHA cage. It is proposed that the reaction proceeds through the alkyl mechanism based on stability of alkyl hydride intermediates as determined using DFT calculations. The oxidative addition of ethane to the metal shows much lower Gibbs free energy for Ga-CHA (+27.95 kJ/mol) vs In-CHA (+124.85 kJ/mol). Finally, these results indicate that oxidative addition may be the rate-limiting step of ethane dehydrogenation in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystal structure and magnetic properties of CeFe 11 M (M = Mo, W)

Tetragonal CeFe 11 Mo (struct. type ThMn 12 , a = 8.529(1) Å, c = 4.766(1) Å, V = 346.68(1) Å 3 ) and novel isostructural CeFe 11 W (a = 8.539(1) Å, c = 4.754(1) Å, V = 346.62(1) Å 3 ) are obtained in bulk, as homogenized single-phase arc-melted alloys. Here, their crystal structures are evaluated by full profile Rietveld analysis of the powder X-ray diffraction patterns which confirm that Ce occupies the 2a atomic site in both cases, whereas atomic disorder is present in the Fe-sublattice, i.e., predominantly on the dumbbell 8i site and minorly on two other sites 8j and 8f. In CeFe 11 Mo the third element, M, is mixed with Fe on the 8i dumbbell site and 8f atomic position, whereas in CeFe 11 W, M is mixed on the 8i and 8j Fe sites. In these bulk CeFe 12-x M x alloys the tetragonal structure persists at lower M content, x < 1 here, in comparison to known similar alloys, with x > 1. Because of the low M content, comparably higher values of mass magnetization and Curie temperature are achieved i.e., CeFe 11 Mo: ϭ s = 104 emu/g (14.7 µ B /f.u.), T c = 420 K and CeFe 11 W: ϭ s = 99 emu/g (16.5 µ B /f.u.), T c = 450 K. Magnetocrystalline anisotropy is uniaxial with anisotropy fields H a ∼ 14.5 and 16.5 kOe, respectively. Based on Curie temperature and magnetic anisotropy enhancements, using tungsten as the stabilizing dopant is more beneficial than molybdenum.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The lattice parameter – composition relationship of the body centered cubic uranium-niobium alloys

In this paper, in-situ time-of-flight neutron diffraction experiments were performed on uranium-niobium alloy with 6 wt% Nb to study the lattice parameter-composition relationship for the body centered cubic (bcc) alloys. Based on lattice-parameter measurements of Nb-supersaturated γs phase over the range of 450 – 790 °C, an improved Vegard's-type relationship was established for determination of Nb concentrations at elevated temperatures. Neutron diffraction data were also collected as a function of aging time over the 450 - 600 °C range when γs phase decomposed isothermally into the mixture of orthorhombic α-U and Nb-rich bcc phase, as well as at room-temperature on the alloys aged ex-situ at 500 °C up to five years. From these measurements, the average Nb concentrations in the bcc phase were determined based on the Rietveld refinements of weight fraction and mass conservation relations (lever rule). Over the 15at% – 78at% range of Nb concentrations that correspond to different experimental aging times, the lattice parameters at constant temperatures exhibit a nonlinear S-shaped variation with Nb concentration, and the associated excess volumes of mixing can be described by a subregular solution model of the Redlich–Kister type of polynomial. Over the full range of composition the S-shaped deviation from Vegard's law can be modeled using a combination of an elastic continuum model and a perturbation to the radii of the solute atoms in the solvent, suggesting that electronic interactions between solute and solvent atoms could play an important role in the compositional dependence of lattice parameter for the γ-phase U-Nb alloys. While Vegard's law is a straightforward and reasonably good approximation for the bcc solid solutions in the U-Nb system, the Nb concentrations determined from the weight fraction refinements of diffraction data provide internally consistent, mass-conserving estimates of solute redistribution for the monotectoid reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Microstructure Evolution of U–Zr System in A Thermal Cycling Neutron Diffraction Experiment: Extruded U–10Zr (wt. %)

Microstructure evolution of 1073 K extruded U–10Zr (wt. %) fuel during thermal cycling (303–1073 K with a ~9 hour hold at 873 K during cooling) was investigated using in situ neutron diffraction. Analysis was performed using Rietveld texture and crystal structure refinements from time–of–flight neutron diffraction data, with a focus on the evolution of textures and lattice parameters as a function of temperature. The α–U phase exhibits lattice contraction with increasing temperature along the b lattice direction and lattice expansion in the other directions while the other phases exhibit lattice expansion with temperature in all directions. Contrary to the established phase diagram, the β–U phase is absent at the temperatures of the thermal cycling. (001) α and (110) γ plane normals are observed with a strong preferred orientation along the extrusion direction. Finally, the variant selection of (001) α ||(110) γ is observed for the first time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Optical vibrational spectra and proposed crystal structure of ε-UO 3

ε-UO 3 is an exotic polymorph in the uranium trioxide system with an undetermined crystal structure and limited optical vibrational spectroscopic data. To improve understanding of this compound, we synthesize and investigate the crystal structure and optical vibrational spectra of ε-UO 3 . Infrared spectra collected for ε-UO 3 are in good agreement with previously published results, and our studies extend the available data into the low-energy (600–100 cm –1 ) regime. For the first time, Raman spectra are presented for ε-UO 3 using both 785 and 532 nm excitation wavelengths. Previous reports suggest an impurity phase may be present in ε-UO 3 produced by calcination of U 3 O 8 ; however, spectral center-of-mass calculations, principal component analyses, and Raman spectroscopic mapping employed to investigate this possibility indicate that the product of U 3 O 8 calcined in O 3 (g) in this work is likely phase-pure. A possible novel structure solution for ε-UO 3 is determined via Rietveld refinement of powder X-ray diffraction data and is triclinic, P-1, with a = 4.01 Å, b = 3.85 Å, c = 4.18 Å, and α = 98.26°, β = 90.41°, γ = 120.46° (R wp = 8.30%). The asymmetric unit of ε-UO 3 consists of U(VI) in hexagonal bipyramidal coordination with displaced equatorial oxygen. Further analysis reveals that the structure of ε-UO3 is best described by a 2 × 1 × 2 supercell structure in P-1 with a = 8.03 Å, b = 3.86 Å, c = 8.37 Å with α = 98.26°, β = 90.41°, and γ = 120.46°, although a higher-symmetry structure is possible. Optical vibrational spectroscopic and structural measurements of ε-UO 3 presented here furthers our understanding of this complex uranium oxide and clarifies the origin of reported structural similarity to U 3 O 8 .

-UO3↗
DOE OSTI2022

Phase evolution of U-Zr system in a thermal cycling neutron diffraction experiment: as-cast U-35Zr and U-50Zr

Here, phase evolution of as-cast U-35 wt% Zr and U-50 wt% Zr alloys during thermal cycling (303–1073 K) was investigated using in-situ neutron diffraction. Analysis was performed using Rietveld crystal and microstructure refinements from time-of-flight neutron diffraction data, with a focus on evolution of lattice parameter, atom ordering, unit cell volume, and weight fractions during the thermal cycling. Disordered δ-UZr 2 and residual γ-(U,Zr) phase are retained in the field of δ of the U-Zr equilibrium phase diagram for the U-50Zr sample, and in the field between δ and α-U for the U-35Zr sample. The α phase that is present in the reported phase diagrams of U-Zr was not observed in the diffraction patterns. The evolutions of lattice parameter and unit cell volume of δ and γ are affected by both thermal expansion and chemistry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

The effects of hydrogen absorption in U 3 Si 5 and its thermodynamic properties

The hydrogen absorption behavior of U 3 Si 5 was examined using a Sieverts apparatus. Experimental results revealed the formation of a hydride phase with a stoichiometry reaching U 3 Si 5 H 1.23 at pressures up to 250 kPa and temperatures below 300°C. Further, by employing Van 't Hoff analysis, the enthalpy and entropy of formation for the newly formed hydride phase were measured as -19.73 $kJ$ ∙ $mol$ -1 and -251.18 $J$ ∙ $mol$ -1 ∙ $T$ -1 , respectively. Rietveld refinement showcased an expansion in lattice parameters a and c, resulting in an overall increase in unit cell volume of up to 8%; volume expansion can induce structural failures within the material.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Statistical fracture behavior of doped UO 2 using a ball-on-ring equibiaxial flexure test method

Metal oxide dopants, such as titanium and chromium oxides, have garnered considerable attention for their potential to increase grain size (≥ 30 µm) in UO 2 fuel, purportedly enhancing fission gas retention during reactor operation. Fuel performance is significantly impacted by fuel fracture behavior, so it is important to understand the effects of enhanced grain size and dopant content on UO 2 fuel fracture. UO 2 pellets were doped with 0.1 wt% TiO 2 and 0.3 wt% Cr 2 O 3 to alter density and grain size. Inductively coupled plasma mass spectroscopy measured dopant levels pre- and post-sintering. X-ray diffraction revealed lattice changes and microstrain via Rietveld refinement. Field emission scanning electron microscopy determined grain sizes of approximately 30 µm for TiO 2 doping and 7 µm for Cr 2 O 3 doping. Transverse rupture strength tests were performed on over 30 samples per dataset to obtain characteristic strength and Weibull modulus. Results indicate no statistical difference in fracture strength between 0.1 wt% TiO 2 doped UO 2 and undoped UO 2 , while 0.3 wt% Cr 2 O 3 doped UO 2 exhibited a 20% decrease in fracture strength. Doped UO 2 samples also showed reduced Weibull modulus compared to undoped UO 2 , suggesting increased scatter in fracture strength. This study's findings suggest that titanium and chromium oxide doping in UO 2 , regardless of grain size, induce residual stresses, decreasing fracture strength and increasing variability in fracture behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Synchrotron X-ray diffraction of pyrolusite (MnO 2 ) and rutile (TiO 2 ) during heating to ~1000 °C

To compare thermal expansion behaviors in isomorphic structures with different redox behaviors, we separately heated pyrolusite (Mn 4+ O 2 ) and rutile (Ti 4+ O 2 ) powders from 25 to ~1000 °C at a rate of 0.05 °C/s at ambient pressure and analyzed them using synchrotron X-ray diffraction and Rietveld refinement. The pyrolusite exhibited two reduction-induced phase decompositions. Between 531 and 583 °C, pyrolusite decomposed to bixbyite (Mn 3+ 2 O 3 ), and between 972 and 998 °C, bixbyite decomposed to hausmannite (Mn 2+ Mn 3+ 2 O 4 ). The rutile experienced no phase decompositions or transitions over this same temperature interval. The refined bond lengths and angles for pyrolusite showed that the Mn 4+ coordination octahedron became more distorted near the phase decomposition to bixbyite due to the approach of two coordinating oxygen atoms. The 3d electrons of each Mn 4+ ion in pyrolusite make π bonds with the 2p electrons of the surrounding O 2- ions, whereas the Ti 4+ of rutile has no 3d electrons. Thus, π bonding between octahedral Mn 4+ and the surrounding O 2- anions increases the strength of the Mn–O bonds of pyrolusite relative to the Ti–O bonds of rutile. However, we observed a small decrease in O–O distances in pyrolusite before the decomposition, suggesting that at high temperature, increased π bonding between adjacent O anions precedes the release of O 2 and the reduction of Mn 4+ to Mn 3+ . Analogous behavior was observed for bixbyite before its reductive phase decomposition to hausmannite. In contrast, no anomalous changes in the O–O distances occurred for rutile. Our X-ray diffraction analyses provided accurate thermal expansion coefficients for these materials over a broader temperature range than reported in previous studies. The Mn–O bond lengths in pyrolusite were shorter and stronger than the Ti–O bonds of rutile; for example, at 60 °C, bond distances in pyrolusite refined to 1.8854(6) Å whereas the bond lengths of rutile were 1.9575(4) Å. Accordingly, the axial and volumetric thermal expansion coefficients refined for rutile were greater than those for pyrolusite. Further, the axial coefficients of thermal expansion (CTE) for pyrolusite were 96% (a-axis) and 69% (c-axis) of the corresponding values for rutile, and the volumetric CTE for pyrolusite was 85% of that for rutile.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Optimization of the compositions of polyanionic sodium-ion battery cathode NaFe 2-x V x (PO 4 )(SO 4 ) 2

Sodium (Na) super ionic conductor (NASICON) polyanionic compounds have recently attracted much attention from the battery community because of their electroactive properties and reasonably high ionic conductivities, leading to their use as a cathode in sodium-ion batteries. This article describes the compositional optimizations, crystallographic evaluations, and electrochemical behavior of a new mixed NASICON polyanionic compound, NaFe 2-x V x (PO 4 )(SO 4 ) 2 . By doping the characteristic Fe 3+ sites of the FeO 6 octahedrons with varying amounts of V 3+ , the electrochemical stability and charge transport in NaFe 2 (PO 4 )(SO 4 ) 2 were enhanced. The resulting best composition, with crystal structure NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 resolved through the Rietveld method, exhibited a stable capacity compared with the other synthesized compositions. In situ powder x-ray diffraction measurements, a single-phase intercalation/deintercalation mechanism of the NASICON structure in the measured sodium concentration window was observed with no impurity phase formation. Further electrochemical assessments revealed the interfacial charge transfer kinetics to be the rate-limiting step in the sodium concentration window. Also, the measured sodium-ion diffusivity values in the range of 6 × 10 -11 to 7 × 10 -11 cm 2 /s in the measured sodium concentration range. The results reported here highlight the potential of compositionally and morphologically optimized NaFe 1.4 V 0.6 (PO 4 )(SO 4 ) 2 with higher particle surface areas as a cathode material for high-performance sodium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Unusual superparamagnetic behavior in bulk Ba 0.198 La 0.784 Ti 0.096 Fe 0.8 O 3-δ

Here, we report the observation of superparamgnetic behavior induced by the substitution La 3+ by Ba 2+ at A-sites and Fe +3 by Ti 4+ at B-sites. Ba 0.198 La 0.784 Ti 0.096 Fe 0.8 O 3-δ was synthesized via solid state reaction. The Rietveld refinements revealed an orthorhombic (Pbnm). The low-mag STEM results showed that the particles were found to exhibit square like shape and formed in single crystal with high degree of crystallinity. The particle size ranges of 50 300 nm. Element mapping demonstrates a complementary distribution between Ba and La, while homogenous distribution is found for Fe and O. The optical band gap determined from UV-vis analysis is equal to 1.93 eV which is smaller than the reported one for LaFeO 3 and BaTiO 3 . The hysteresis loops at 300 K and 10 K show superparamagnetic behavior, which deviate extremely from the antiferromagnetic nature of LaFeO 3 perovskite. The temperature dependent magnetization demonstrates that the material kept a net magnetization of 12.29 (emu/g) at very low temperature.

36 MATERIALS SCIENCE↗