SEARCH · Engineering Papers

Results for “Requirements Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Nonlinear feedback control for high alpha flight

Analytical aerodynamic models are derived from a high alpha 6 DOF wind tunnel model. One detail model requires some interpolation between nonlinear functions of alpha. One analytical model requires no interpolation and as such is a completely continuous model. Flight path optimization is conducted on the basic maneuvers: half-loop, 90 degree pitch-up, and level turn. The optimal control analysis uses the derived analytical model in the equations of motion and is based on both moment and force equations. The maximum principle solution for the half-loop is poststall trajectory performing the half-loop in 13.6 seconds. The agility induced by thrust vectoring capability provided a minimum effect on reducing the maneuver time. By means of thrust vectoring control the 90 degrees pitch-up maneuver can be executed in a small place over a short time interval. The agility capability of thrust vectoring is quite beneficial for pitch-up maneuvers. The level turn results are based currently on only outer layer solutions of singular perturbation. Poststall solutions provide high turn rates but generate higher losses of energy than that of classical sustained solutions.

Stalford, Harold↗

NASA NTRS1997

Reuse of a Formal Model for Requirements Validation

This paper report experience from how a project engaged in the process of requirements analysis for evolutionary builds can reuse the formally specified design model produced for a similar, earlier project in the same domain.

requirements↗

NASA NTRS1987

Effects of ground proximity on a low aspect ratio propulsive wing/canard configuration

The effect of near proximity to the ground are investigated on a low aspect ratio propulsive wing/canard concept at STOL conditions. Data were obtained on a wing/body and wing/body/canard configuration at various heights above the ground, ranging from free air to approximately 1/4 of the mean aerodynamic chord (MAC) above the ground. The data presented and discussed include force and moment coefficients, surface pressure distributions, and downwash angles measured one MAC behind the wing. The test technique, model requirements, and special considerations required for testing these configurations are also discussed. Special model requirements included evenly distributed exit nozzle pressures along four separate nozzles of lengths of one and two feet with only one air supply to the model. Test techniques must recognize and deal with the ground boundary layer as well as the air supply pressure measurement and management.

Stewart, V. R.↗

NASA NTRS1992

A comparison between backscattering models for rough surfaces

The ease of applicability of three scattering models is examined. This is accomplished by considering the time taken to numerically evaluate these models and by comparing their predictions as a function of surface roughness, frequency, incident angle and polarization with the moment-method solution in two dimensions. The complexity of the analytic models in three dimensions and their analytic reduction to high- and low-frequency regions are also compared. The selected models are an integral equation model (IEM), a full wave model (FWM), and the phase perturbation model (PPM). It is noted that in three dimensions, the full-wave model requires an evaluation of a tenfold integral and the phase perturbation model requires a fourfold and a twofold integral, whereas the integral equation model is an algebraic equation in like polarization under single scattering conditions. It is found that both the IEM and PPM agree with the moment-method solution from low to high frequencies numerically.

Chen, K. S.↗

NASA NTRS1997

Comparison of Two-Equation Turbulence Models for Prediction of Heat Transfer on Film-Cooled Turbine Blades

A three-dimensional Navier-Stokes code has been used to compute the heat transfer coefficient on two film-cooled turbine blades, namely, the VKI rotor with six rows of cooling holes, including three rows on the shower head and the C3X vane with nine rows of holes, including five rows on the shower head. Predictions of heat transfer coefficient at the blade surface using three two-equation turbulence model specifically, Coakley's q-omega model, Chien's k-epsilon model and Wilcox's k-omega model with Menter's modifications, have been compared with the experimental data of Camci and Arts for the VKI rotor, and of Hylton et al. for the C3X vane along with predictions using the Baldwin-Lomar (B-L) model taken from Garg and Gaugler. It is found that for the cases considered here the two equation models predict the blade heat transfer somewhat better than the B-L model except immediately downstream of the film-cooled holes on the suction surface of the VKI rotor, and over most of the suction surface of the C3X vane. However, all two-equation models require 40% more computer core than the B-L model for solution, and while the q-omega and k-epsilon models need 40% more computer time than the B-L model the k-omega model requires at least 65% more time because of the slower rate of convergence. It is found that the heat transfer coefficient exhibit a strong spanwise as well as streamwise variation for both blades and all turbulence models.

Garg, Vijay K.↗

NASA NTRS2004

X Persei: The X-Ray Halo and Spectrum of a High-Latitude X-Ray Binary

The observations were completed on February 25,2003. Although the source was in the FOV for 31.4 ksec, only 18.2 ksec of data were usable due to a strong flare in the first part of the observations. We have extracted the X-ray halo from the good portion of the data, and were then faced with the problem of calibrating the far-off-axis point spread function, which is needed only for X-ray halo analysis; the same problem affected Chandra halo observations. We used data from 3C273, MCG 6-30-15, LMC X-1, and Her X-1 to measure the PSF, and found that it is reasonably well fit with a power law of the form PSF(theta) = A theta^-G, where A = 0.0034 arcmin^-2, and G = 3.05 for energies between 1-4 keV. This suggests there are fewer large dust grains along the When fitting the spectrum of X Persei, we found NH = 3e21 cm^-2, as expected. However, the X-ray halo (using a Mathis, Rumpl, Nordsieck 1977 dust model) required at most a column density of 1.4+/-0.1 e21 cm^-2; other models required sightline to X Per than would have been expected. In addition, a smoothly distributed dust model fit the observations better than a single cloud model, also against our expectations. We are in the process of writing a paper to be submitted to ApJ with these results, and will also present them at the 2004 HEAD meeting in New Orleans.

Mushotzky, Richard↗

NASA NTRS1976

Recent research related to prediction of stall/spin characteristics of fighter aircraft

The NASA Langley Research Center is currently engaged in a stall/spin research program to provide the fundamental information and design guidelines required to predict the stall/spin characteristics of fighter aircraft. The prediction methods under study include theoretical spin prediction techniques and piloted simulation studies. The paper discusses the overall status of theoretical techniques including: (1) input data requirements, (2) math model requirements, and (3) correlation between theoretical and experimental results. The Langley Differential Maneuvering Simulator (DMS) facility has been used to evaluate the spin susceptibility of several current fighters during typical air combat maneuvers and to develop and evaluate the effectiveness of automatic departure/spin prevention concepts. The evaluation procedure is described and some of the more significant results of the studies are presented.

Nguyen, L. T.↗

NASA NTRS1981

Calibration of a turbidity meter for making estimates of total suspended solids concentrations and beam attenuation coefficients in field experiments

Management of water resources such as a reservoir requires using analytical models which describe such parameters as the suspended sediment field. To select or develop an appropriate model requires making many measurements to describe the distribution of this parameter in the water column. One potential method for making those measurements expeditiously is to measure light transmission or turbidity and relate that parameter to total suspended solids concentrations. An instrument which may be used for this purpose was calibrated by generating curves of transmission measurements plotted against measured values of total suspended solids concentrations and beam attenuation coefficients. Results of these experiments indicate that field measurements made with this instrument using curves generated in this study should correlate with total suspended solids concentrations and beam attenuation coefficients in the water column within 20 percent.

Usry, J. W.↗

NASA NTRS2005

Experience With Bayesian Image Based Surface Modeling

Bayesian surface modeling from images requires modeling both the surface and the image generation process, in order to optimize the models by comparing actual and generated images. Thus it differs greatly, both conceptually and in computational difficulty, from conventional stereo surface recovery techniques. But it offers the possibility of using any number of images, taken under quite different conditions, and by different instruments that provide independent and often complementary information, to generate a single surface model that fuses all available information. I describe an implemented system, with a brief introduction to the underlying mathematical models and the compromises made for computational efficiency. I describe successes and failures achieved on actual imagery, where we went wrong and what we did right, and how our approach could be improved. Lastly I discuss how the same approach can be extended to distinct types of instruments, to achieve true sensor fusion.

Stutz, John C.↗

DOE OSTI2025

Cluster Dynamics Modeling Needs for the Advanced Materials and Manufacturing Technologies Program

This milestone report aims to identify and assess the cluster dynamics (CD) modeling requirements within the Department of Energy's Office of Nuclear Energy (DOE-NE) Advanced Materials and Manufacturing Technologies (AMMT) program and to communicate these needs to the DOE-NE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The goal is to ensure NEAMS is well-informed about the CD modeling requirements to support AMMT's mission of accelerating the development, qualification, demonstration, and deployment of advanced structural materials and manufacturing for nuclear energy applications. CD modeling is an essential tool for predicting the degradation of structural materials under irradiation, which is a key component of AMMT's accelerated qualification process. The AMMT program focuses on both additively manufactured and wrought structural alloys, such as laser powder-bed fusion 316H austenitic stainless steel, alloy 709, Haynes 244, and alloy 617. These materials require a generalized CD modeling framework to facilitate rapid model development and computational simulation. A flexible, generalized CD software, similar to the Multiphysics Object-Oriented Simulation Environment (MOOSE) finite element framework, would enable modeling of various cluster types, including defect clusters, defect-solute clusters, and multicomponent clusters, incorporating thermodynamics and kinetics parameters. Radiation effects, microstructural feature evolution, and multi-dimensional modeling are critical considerations for the CD model. The usability of the CD code should allow for easy modification and coupling with MOOSE-based simulations. Additionally, the software should adhere to Nuclear Quality Assurance-1 standards, include a testing suite for verification and validation, and be version-controlled within a national laboratory-managed Git repository. Benchmark problems are needed to assess code predictions and performance.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2004

Software Safety Analysis of a Flight Guidance System

This document summarizes the safety analysis performed on a Flight Guidance System (FGS) requirements model. In particular, the safety properties desired of the FGS model are identified and the presence of the safety properties in the model is formally verified. Chapter 1 provides an introduction to the entire project, while Chapter 2 gives a brief overview of the problem domain, the nature of accidents, model based development, and the four-variable model. Chapter 3 outlines the approach. Chapter 4 presents the results of the traditional safety analysis techniques and illustrates how the hazardous conditions associated with the system trace into specific safety properties. Chapter 5 presents the results of the formal methods analysis technique model checking that was used to verify the presence of the safety properties in the requirements model. Finally, Chapter 6 summarizes the main conclusions of the study, first and foremost that model checking is a very effective verification technique to use on discrete models with reasonable state spaces. Additional supporting details are provided in the appendices.

Butler, Ricky W.↗

NASA NTRS2004

Portable Wireless LAN Device and Two-Way Radio Threat Assessment for Aircraft VHF Communication Radio Band

Nguyen, Truong X.↗

NASA NTRSDate not supplied

Geometric Requirements for Modeling Polycrystalline Representative Volume Elements Using the Generalized Method of Cells

To accurately predict the mechanical response of advanced metallic parts, the grain structure of the metal must be considered and coupled to the macroscale in a multiscale model. The size of the microscale representative volume element must be sufficiently large, and the grid used to discretize the microscale must be adequately refined, in order to ensure an accurate and converged solution. The generalized method of cells is used to predict the mechanical properties of polycrystalline representative volume elements of copper containing randomly oriented grains with the properties of a single face-centered-cubic crystal. Moreover, the results of a parametric study are used to conclude the geometric requirements for an objective microscale model, with respect to the elastic stiffness.

Multiscale Modeling↗

NASA NTRS2021

Constraining particle acceleration in Sgr A? with simultaneous GRAVITY, Spitzer, NuSTAR, and Chandra observations

We report the time-resolved spectral analysis of a bright near-infrared and moderate X-ray flare of Sgr A⋆. We obtained light curves in the M, K, and H bands in the mid- and near-infrared and in the 2 − 8 keV and 2 − 70 keV bands in the X-ray. The observed spectral slope in the near-infrared band is νLν ∝ ν0.5 ± 0.2; the spectral slope observed in the X-ray band is νLν ∝ ν−0.7 ± 0.5. Using a fast numerical implementation of a synchrotron sphere with a constant radius, magnetic field, and electron density (i.e., a one-zone model), we tested various synchrotron and synchrotron self-Compton scenarios. The observed near-infrared brightness and X-ray faintness, together with the observed spectral slopes, pose challenges for all models explored. We rule out a scenario in which the near-infrared emission is synchrotron emission and the X-ray emission is synchrotron self-Compton. Two realizations of the one-zone model can explain the observed flare and its temporal correlation: one-zone model in which the near-infrared and X-ray luminosity are produced by synchrotron self-Compton and a model in which the luminosity stems from a cooled synchrotron spectrum. Both models can describe the mean spectral energy distribution (SED) and temporal evolution similarly well. In order to describe the mean SED, both models require specific values of the maximum Lorentz factor γmax, which differ by roughly two orders of magnitude. The synchrotron self-Compton model suggests that electrons are accelerated to γmax ∼ 500, while cooled synchrotron model requires acceleration up to γmax ∼ 5 × 104. The synchrotron self-Compton scenario requires electron densities of 1010 cm−3 that are much larger than typical ambient densities in the accretion flow. Furthermore, it requires a variation of the particle density that is inconsistent with the average mass-flow rate inferred from polarization measurements and can therefore only be realized in an extraordinary accretion event. In contrast, assuming a source size of 1 RS, the cooled synchrotron scenario can be realized with densities and magnetic fields comparable with the ambient accretion flow. For both models, the temporal evolution is regulated through the maximum acceleration factor γmax, implying that sustained particle acceleration is required to explain at least a part of the temporal evolution of the flare.

R. Abuter↗

NASA NTRS1985

Aerosol measurement program strategy for global aerosol backscatter model development

The purpose was to propose a balanced program of aerosol backscatter research leading to the development of a global model of aerosol backscatter. Such a model is needed for feasibility studies and systems simulation studies for NASA's prospective satellite-based Doppler lidar wind measurement system. Systems of this kind measure the Doppler shift in the backscatter return from small atmospheric aerosol wind tracers (of order 1 micrometer diameter). The accuracy of the derived local wind estimates and the degree of global wind coverage for such a system are limited by the local availability and by the global scale distribution of natural aerosol particles. The discussions here refer primarily to backscatter model requirements at CO2 wavelengths, which have been selected for most of the Doppler lidar systems studies to date. Model requirements for other potential wavelengths would be similar.

Bowdle, David A.↗

NASA NTRS2001

Requirements for Modeling and Simulation for Space Medicine Operations: Preliminary Considerations

The NASA Space Medicine program is now developing plans for more extensive use of high-fidelity medical Simulation systems. The use of simulation is seen as means to more effectively use the limited time available for astronaut medical training. Training systems should be adaptable for use in a variety of training environments, including classrooms or laboratories, space vehicle mockups, analog environments, and in microgravity. Modeling and simulation can also provide the space medicine development program a mechanism for evaluation of other medical technologies under operationally realistic conditions. Systems and procedures need preflight verification with ground-based testing. Traditionally, component testing has been accomplished, but practical means for "human in the loop" verification of patient care systems have been lacking. Medical modeling and simulation technology offer potential means to accomplish such validation work. Initial considerations in the development of functional requirements and design standards for simulation systems for space medicine are discussed.

Dawson, David L.↗

NASA NTRS2009

Corona, Jet, and Relativistic Line Models for Suzaku/RXTE/Chandra-HETG Observations of the Cygnus X-1 Hard State

Using Suzaku and the Rossi X-ray Timing Explorer (RXTE), we have conducted a series of four simultaneous observations of the galactic black hole candidate Cyg X-1 in what were historically faint and spectrally hard "low states". Additionally, all of these observations occurred near superior conjunction with our line of sight to the X-ray source passing through the dense phases of the "focused wind" from the mass donating secondary. One of our observations was also simultaneous with observations by the Chandra-High Energy Transmission Grating (HETG). These latter spectra are crucial for revealing the ionized absorption due to the secondary s focused wind. Such absorption is present and must be accounted for in all four spectra. These simultaneous data give an unprecedented view of the 0.8-300 keV spectrum of Cyg X-1, and hence bear upon both corona and X-ray emitting jet models of black hole hard states. Three models fit the spectra well: coronae with thermal or mixed thermal/non-thermal electron populations, and jets. All three models require a soft component that we fit with a low temperature disk spectrum with an inner radius of only a few tens of GM/c2. All three models also agree that the known spectral break at 10 keV is not solely due to the presence of reflection, but each gives a different underlying explanation for the augmentation of this break. Thus whereas all three models require that there is a relativistically broadened Fe line, the strength and inner radius of such a line is dependent upon the specific model, thus making premature line-based estimates of the black hole spin in the Cyg X-1 system. We look at the relativistic line in detail, accounting for the narrow Fe emission and ionized absorption detected by HETG. Although the specific relativistic parameters of the line are continuum-dependent, none of the broad line fits allow for an inner disk radius that is > 40 GM/c(sup 2).

Nowak, Michael A.↗

NASA NTRS1988

Io: IUE observations of its atmosphere and the plasma torus

Two of the main components of the atmosphere of Io, neutral oxygen and sulfur, were detected with the IUE. Four observations yield brightnesses that are similar, regardless of whether the upstream or the downstream sides of the torus plasma flow around Io is observed. A simple model requires the emissions to be produced by the interaction of O and S columns in the exospheric range with 2 eV electrons. Cooling of the 5 eV torus electrons is required prior to their interaction with the atmosphere of Io. Inconsistencies in the characteristics of the spectra that cannot be accounted for in this model require further analysis with improved atomic data. The Io plasma torus was monitored with the IUE. The long-term stability of the warm torus is established. The observed brightnesses were analyzed using a model of the torus, and variations of less than 30 percent in the composition are observed, the quantitative results being model dependent.

Ballester, G. E.↗