SEARCH · Engineering Papers

Results for “Real-time simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Real-time minimal bit error probability decoding of convolutional codes

A recursive procedure is derived for decoding of rate R=1/n binary convolutional codes which minimizes the probability of the individual decoding decisions for each information bit subject to the constraint that the decoding delay be limited to Delta branches. This new decoding algorithm is similar to, but somewhat more complex than, the Viterbi decoding algorithm. A real-time, i.e. fixed decoding delay, version of the Viterbi algorithm is also developed and used for comparison to the new algorithm on simulated channels. It is shown that the new algorithm offers advantages over Viterbi decoding in soft-decision applications such as in the inner coding system for concatenated coding.

Lee, L. N.↗

NASA NTRS1974

Real-time minimal-bit-error probability decoding of convolutional codes

A recursive procedure is derived for decoding of rate R = 1/n binary convolutional codes which minimizes the probability of the individual decoding decisions for each information bit, subject to the constraint that the decoding delay be limited to Delta branches. This new decoding algorithm is similar to, but somewhat more complex than, the Viterbi decoding algorithm. A real-time, i.e., fixed decoding delay, version of the Viterbi algorithm is also developed and used for comparison to the new algorithm on simulated channels. It is shown that the new algorithm offers advantages over Viterbi decoding in soft-decision applications, such as in the inner coding system for concatenated coding.

Lee, L.-N.↗

NASA NTRS1974

Shuttle environmental and thermal control/life support system computer program

Computer programs developed to simulate the RSECS (representative shuttle environmental control system) are described. These programs were prepared to provide pretest predictions, post-test analysis and real-time problem analysis for RSECS test planning and evaluation. These programs are on a magnetic tape cassette and on a disc device that is part of the WANG-2200 series computer system.

Elfers, F. A.↗

NASA NTRS1974

The use of a multi-processor minicomputer for communication system simulation

An experimental facility is described which allows new computer communications techniques to be tested under conditions closely approximating those of real systems. A three-processor minicomputer configuration is used to achieve real-time operation at channel transmission rates of up to 50 Kbits per second. One processor runs a channel controller-concentrator program, a second is dedicated to simulation of the communication channel characteristics, and the third to the simulation of up to 1000 user terminals. The latter are divided into classes consisting of interactive time-sharing users of differing characteristics and file nodes, mixed in different proportions. Real user nodes are connected to the channel simulator processor, providing experience with actual operating characteristics under different channel loadings.

Binder, R.↗

NASA NTRS1968

Improved technique for digital simulation of bending and slosh phenomena

Mathematical model representation of bending and slosh phenomena in the Saturn vehicle results in linear second order differential equations. Improved technique was developed to provide a real-time digital solution of the equations. The technique may also be applied to nonreal time digital simultations, resulting in savings of digital computer time.

Stauffer, N. E.↗

NASA NTRS1974

Shuttle spacelab simulation using a Lear jet aircraft: Mission no. 3 (ASSESS program)

The third ASSESS mission using a Lear Jet aircraft conducted to continue the study of scientific experiment operations in a simulated Spacelab environment. Prior to the mission, research planning and equipment preparation were observed and documented. A flight readiness review for the experiment was conducted. Nine of the ten scheduled flights were completed during simulation mission and all major science objectives were accomplished. The equipment was well qualified for flight and gave little trouble; telescope malfunctions occurred early in the mission and were corrected. Both real-time and post-observation data evaluation were used to assess research progress and to plan subsequent flight observations for maximum effectiveness.

Reller, J. O., Jr.↗

NASA NTRS1972

Preliminary results of the satellite orbit determination of Mariner Mars 1971.

The preflight planning and real-time experience relating to the navigation of the first artificial satellite placed about a distant planet is presented. Results of determining the orbit of Mariner 9 are presented and contrasted against the preflight simulation test results. It is concluded that the position of Mariner 9 was located to 40 km before coefficients of the gravity field of Mars were estimated. The planet Mars has been found to be 3 to 4 times gravitationally rougher than expected, with the dominant features, the 2nd order tesserals C22 and S22, causing the orbital period of Mariner 9 to oscillate with an amplitude of 40 seconds and a wavelength of 19.5 days. The direction of the Mars spin axis has been relocated from the Camichel-Burton value by 1/2 degree.

Jordan, j. F.↗

NASA NTRS1975

A Standard Kinematic Model for Flight Simulation at NASA Ames

A standard kinematic model for aircraft simulation exists at NASA-Ames on a variety of computer systems, one of which is used to control the flight simulator for advanced aircraft (FSAA). The derivation of the kinematic model is given and various mathematical relationships are presented as a guide. These include descriptions of standardized simulation subsystems such as the atmospheric turbulence model and the generalized six-degrees-of-freedom trim routine, as well as an introduction to the emulative batch-processing system which enables this facility to optimize its real-time environment.

Mcfarland, R. E.↗

NASA NTRS1974

Real-time correction of atmospherically degraded telescope images through image sharpening

We present a new technique for the correction of atmospheric distortion in telescope images. Most of this distortion arises from a random phase variation of the incoming light across the telescope aperture. This variation limits the resolving power of even large telescopes to about one arc second. If the sharpness of the images is defined in a suitable way, this sharpness is maximized only when the phase distortion of the incoming light is zero. We present computer simulations of a simple feedback system in which active optical elements, set to maximize the sharpness, correct most of the atmospheric distortion. Photon statistics set the limiting magnitude of the object for which a practical feedback system can work. Details in a sixth magnitude object smaller than 0.1 sec of arc should be resolvable. The system can be conveniently employed within existing telescopes.

Muller, R. A.↗

NASA NTRS1975

Automatic computer controlled testing of spacecraft and experiments

This paper describes the AUTOTEST system, a large-scale real-time testing system that was originally designed to test the Atmosphere Explorer spacecraft and experiments. It is noted that AUTOTEST is a flexible, fully automatic, programmable system that is externally controlled by a mnemonic test language and can be operated manually as well as automatically. The use of spacecraft simulators in this system is described together with the software and a sample test program. Advantages of AUTOTEST in terms of operational simplicity and low costs are discussed.

Blakeslee, W. D.↗

NASA NTRS1975

Analytical simulation of the far-field jet noise and the unsteady jet flow-field by a model of periodic shedding of vortex ring from the jet exit

The construction of a theoretical flow field due to shedding of vortex rings, the identification of the controlling parameters, and the determination of whether the theoretical model successfully simulated the unsteady pressure field near jet (and consequently the far field noise) was studied. The basic parameters contained in the analytic solutions were the epoch at which a vortex ring was shed near the jet exit and the eddy viscosity coefficient. These parameters were identified from the experimental data for the real-time pressure and from the spread of the mixing layer of the jet. Results of the theoretical analysis show good qualitative agreement with the experimental data.

Liu, C. H.↗

NASA NTRS1976

Analysis of the survivability of the shuttle (ALT) fault-tolerant avionics system

An extension of the Complementary-Analytic-Simulative Technique (CAST) is presented which is applicable to the Shuttle Data Processing Subsystem (DPS). A two step process was used. The first step provides models, both analytic and simulative, for analysis of the Approach-Landing Test (ALT) configuration. The ALT modeling and analysis are presented. Since CAST had already been shown to be multicomputer systems, the emphasis was placed on extending the CAST concept so it is applicable to computer systems including the multiplicity of input and output devices found in a real-time control system application. The DPS mission-critical survivability for a six-hour mission was determined to be 0.999863 for the Shuttle ALT baseline configuration. Thus it can be said that for ALT, the survivability is adequate. However, the fact that orbiting missions of up to 30 days are planned illustrates the necessity of extending the ALT work to be applicable to OFT and actual mission scenarios. The above analysis led to the evaluation of three selected options which identified two areas of possible improvement. These improvements would result from use of a recovery technique which combines roll ahead with memory copy, and increased TACAN fault detectability.

Source record↗

NASA NTRS1976

Continuation of advanced crew procedures development techniques

An operational computer program, the Procedures and Performance Program (PPP) which operates in conjunction with the Phase I Shuttle Procedures Simulator to provide a procedures recording and crew/vehicle performance monitoring capability was developed. A technical synopsis of each task resulting in the development of the Procedures and Performance Program is provided. Conclusions and recommendations for action leading to the improvements in production of crew procedures development and crew training support are included. The PPP provides real-time CRT displays and post-run hardcopy output of procedures, difference procedures, performance data, parametric analysis data, and training script/training status data. During post-run, the program is designed to support evaluation through the reconstruction of displays to any point in time. A permanent record of the simulation exercise can be obtained via hardcopy output of the display data and via transfer to the Generalized Documentation Processor (GDP). Reference procedures data may be transferred from the GDP to the PPP. Interface is provided with the all digital trajectory program, the Space Vehicle Dynamics Simulator (SVDS) to support initial procedures timeline development.

Arbet, J. D.↗

NASA NTRS1972

Procedure for estimating stability and control parameters from flight test data by using maximum likelihood methods employing a real-time digital system

A maximum likelihood parameter estimation procedure and program were developed for the extraction of the stability and control derivatives of aircraft from flight test data. Nonlinear six-degree-of-freedom equations describing aircraft dynamics were used to derive sensitivity equations for quasilinearization. The maximum likelihood function with quasilinearization was used to derive the parameter change equations, the covariance matrices for the parameters and measurement noise, and the performance index function. The maximum likelihood estimator was mechanized into an iterative estimation procedure utilizing a real time digital computer and graphic display system. This program was developed for 8 measured state variables and 40 parameters. Test cases were conducted with simulated data for validation of the estimation procedure and program. The program was applied to a V/STOL tilt wing aircraft, a military fighter airplane, and a light single engine airplane. The particular nonlinear equations of motion, derivation of the sensitivity equations, addition of accelerations into the algorithm, operational features of the real time digital system, and test cases are described.

Grove, R. D.↗

NASA NTRS1972

Apollo experience report: Real-time auxiliary computing facility development

The Apollo real time auxiliary computing function and facility were an extension of the facility used during the Gemini Program. The facility was expanded to include support of all areas of flight control, and computer programs were developed for mission and mission-simulation support. The scope of the function was expanded to include prime mission support functions in addition to engineering evaluations, and the facility became a mandatory mission support facility. The facility functioned as a full scale mission support activity until after the first manned lunar landing mission. After the Apollo 11 mission, the function and facility gradually reverted to a nonmandatory, offline, on-call operation because the real time program flexibility was increased and verified sufficiently to eliminate the need for redundant computations. The evaluation of the facility and function and recommendations for future programs are discussed in this report.

Allday, C. E.↗

NASA NTRS1974

Effects of simulated space environment on Skylab parasol material

A material consisting of ripstop nylon bonded to the Mylar side of aluminized Mylar film was used to construct the first Skylab parasol. The mechanical properties of elongation and tensile strength and the radiative properties of solar absorptance and thermal emittance were measured before and after exposure to simulated solar radiation at intensities of 1.0 and 3.5 solar constants for exposure times as long as 947 hours or 3316 equivalent solar hours. The accelerated testing indicated more severe degradation than was experienced in the real-time test (1 solar constant). The results predicted that this material could have given satisfactory performance throughout the planned lifetime of the Skylab workshop.

Slemp, W. S.↗

NASA NTRS1975

Crack growth in Ti-8Al-1Mo-1V with real-time and accelerated flight by flight loading

Crack growth in Ti-8Al-lMo-lV was measured and calculated for real time and accelerated simulations of supersonic airplane loading and heating. Crack-growth rates calculated on the assumption that an entire flight could be represented by a single cycle predicted the experimental rates poorly. Calculated crack growth rates were slower than the experimental rates for all tests with flight-by-flight loading. For room temperature accelerated tests, the calculated rates agreed well with the experimental rates; but the calculations became progressively less accurate for progressively more complex test conditions (tests that included elevated temperature).

Imig, L. A.↗

NASA NTRS1974

Data analysis study and performance evaluation of the scanning laser Doppler system

A simulation program which provided information on theoretically expected vortex spectra, evaluations of potential algorithms, and expected location accuracies for given scan patterns is presented. Field tests using an aircraft engine flow field and aircraft vortices during flyby tests were compared to the results of the simulation. From these studies, a vortex location algorithm was developed which provided vortex location for one or two vortices as a function of time. Results of this algorithm used on data from flyby tests were used to study vortex transport, to evaluate system performance, and to provide suggestions for real-time vortex location algorithms. The results of real-time analysis were compared to those which were expected based on theoretical considerations.

Sonnenschein, C. M.↗