Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rare-earth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

The lunar interior

The compressional velocities are estimated for materials thought to be important in the lunar interior and compared with lunar seismic results. The lower lunar crust has velocities appropriate for basalts or anorthosites. Anorthosite is preferred if lunar basalts result from a small degree of partial melting. The high velocities associated with the uppermost mantle imply high densities and a change to a lighter assemblage at depths of the order of 120 km. Ca- and Al-rich minerals are important components of both the lower crust and the upper mantle. Most of the moon may have accreted from refractory material rich in Ca, Al, U, and the rare-earth elements. The important mineral of the upper mantle is garnet; possible accessory minerals are kyanite, spinel and rutile. If the seismic results stand up, the high-velocity layer in the moon is more likely to be a high-pressure form of anorthosite than eclogite, pyroxenite, or dunite.

Anderson, D. L.↗

Apollo 16 returned lunar samples - Lithophile trace-element abundances

Lithium, K, Rb, Sr, Ba, rare-earth, Zr, and Hf abundances have been determined by mass-spectrometric isotope-dilution for Apollo 16 soils, anorthosite 61016, and 'basalt' 68415 whole-rock and separated pyroxene and plagioclase. Our sample of 61016 is similar to some other lunar anorthosites in lithophile trace-element concentrations but at a slightly lower level. It was probably accumulated from a little differentiated basalt. Basalt 68415 might be a homogeneous mixture of KREEP and anorthosite material; it appears to have crystallized under conditions as reducing as those holding for mare-basalts. The soil fines cover only a limited compositional range. No obvious chemical differences were noted between the Descartes and Cayley formations. Most of the compositional variation of the soils can be accounted for in terms of the addition of plagioclase. The existence of very high alumina basalt as an independent magma-type appears debatable in view of its KREEP-like lithophile trace-element relative concentrations and the observed lunar radioactivity distribution.

Philpotts, J. A.↗

The distribution of Sr and REE between diopside and silicate liquid

Experimental determination of the distribution coefficients in diopside-liquid pairs for strontium and nine rare-earth elements in the system CaMgSi2O6-NaAlSi3O8-CaAl2Si2O8. In experiments in air at 1265 C it is found that most of the Sr(2+), Eu(2+), and RE(3+) ions substitute for Ca(2+) and, in addition, a coupled substitution of Al(3+) for Si(4+) occurs. All of the trace ions considered are found to be excluded from the diopside lattice relative to the liquid. In the case of the trivalent ions the exclusion is much more pronounced for La and Ce, which have ionic radii larger than that of Ca(2+) in 8-fold oxygen coordination. Divalent Sr and Eu with even larger radii are also strongly excluded.

Grutzeck, M.↗

The geochemical evolution of the moon

Evidence for and implications of homogeneous accretion of the moon are considered. Interelement ratios are used to calculate the composition of the highland crust. The rare-earth data for the highlands show a positive Eu anomaly, allowing the deduction that the interior has a negative anomaly. The Cr/Ni ratios in the highlands are considered in regard to the overall lunar abundance of the siderophile elements. These abundance data and the constraints from the heat flow measurements are next used to set limits on the bulk composition for the moon. The geochemical constraints are integrated with the petrological and geophysical data in an attempt to provide a consistent model for the geochemical evolution of the moon.

Taylor, S. R.↗

Development of a magnetically suspended momentum wheel

An engineering model of a magnetically suspended momentum wheel was designed, fabricated, and tested under laboratory conditions. The basic unit consisted of two magnet bearings, a sculptured aluminum rotor, brushless dc spin motor, and electronics. The magnet bearings, utilizing rare-earth cobltrat-samarium magnets were active radially and passive axially. The results of the program showed that momentum wheels with magnetic bearings are feasible and operable, and that magnetic bearings of this type are capable of being used for applications where high capacity, high stiffness, and low power consumption are required. The tests performed developed criteria for improved performance for future designs.

Hamilton, S. B.↗

Geochemistry of grain-size fractions of soils from the Taurus-Littrow valley floor

Results are presented for a study in which high-precision instrumental neutron activation analysis was applied to determine the abundances of seven rare-earth and nine other elements in two grain-size fractions (90 to 150 microns and less than 20 microns) of eight soils from the Taurus-Littrow Valley floor and one Apollo 11 bulk-soil fraction with grain sizes of less than 1 mm. Compositional differences between the two size fractions of two valley-floor soils are examined, and mixing of soil components is investigated. It is found that a five-component mixing model describes very adequately the chemical composition of bulk soils with grain sizes of less than 1 mm as mixtures of local Apollo 17 rock types (basalt, anorthositic gabbro, noritic breccia), orange glass, and meteorites, but does not describe well the chemical compositions of the other two size fractions. A ten-component model is used to show that the compositions of those two size fractions can be well represented as mixtures of the five components if the mineralogy and chemical composition of the basalt component are allowed to vary in the size fractions.

Korotev, R. L.↗

Magnetic Stirling cycles - A new application for magnetic materials

There is the prospect of a fundamental new application for magnetic materials as the working substance in thermodynamic cycles. Recuperative cycles which use a rare-earth ferromagnetic material near its Curie point in the field of a superconducting magnet appear feasible for applications from below 20 K to above room temperature. The elements of the cycle, advanced in an earlier paper, are summarized. The basic advantages include high entropy density in the magnetic material, completely reversible processes, convenient control of the entropy by the applied field, the feature that heat transfer is possible during all processes, and the ability of the ideal cycle to attain Carnot efficiency. The mean field theory is used to predict the entropy of a ferromagnet in an applied field and also the isothermal entropy change and isentropic temperature change caused by applying a field. Results are presented for J = 7/2 and g = 2. The results for isentropic temperature change are compared with experimental data on Gd. Coarse mixtures of ferromagnetic materials with different Curie points are proposed to modify the path of the cycle in the T-S diagram in order to improve the efficiency or to increase the specific power.

Brown, G. V.↗

UH cosmic rays and solar system material - The elements just beyond iron

The nucleosynthesis of cosmic-ray elements between the iron peak and the rare-earth region is examined, and compositional changes introduced by propagation in interstellar space are calculated. Theories on the origin of elements heavier than iron are reviewed, a supernova model of explosive nucleosynthesis is adopted for the ultraheavy (UH) cosmic rays, and computational results for different source distributions are compared with experimental data. It is shown that both the cosmic-ray data and the nucleosynthesis calculations are not yet of sufficient precision to pinpoint the processes occurring in cosmic-ray source regions, that the available data do provide boundary conditions for cosmic-ray nucleosynthesis, and that these limits may apply to the origin of elements in the solar system. Specifically, it is concluded that solar-system abundances appear to be consistent with a superposition of the massive-star core-helium-burning s-process plus explosive-carbon-burning synthesis for the elements from Cu to As and are explained adequately by the s- and r-processes for heavier elements.

Wefel, J. P.↗

A practical magnetic bearing

A small compact magnetic bearing design developed and tested features a bearing capable of supporting over ten times its own weight, dimensioned 8 cm diam by 3.75 cm, with rare-earth cobalt magnets. Only 1% of the device payload figures as part of the magnetic suspension. The design is servoed in two axes and exhibits inherent stability in three more degrees of freedom, with full rotational freedom in the desired axis. Capacitive radial gap sensing allows stiff servoing of the rotation axis. Differential sensing and EM control linearize control functions. Low power drain, simple fabrication and assembly, and larger clearances than in air bearings or ball bearings are reported

Studer, P. A.↗

New alloys to conserve critical elements

Previous studies and surveys on availability of domestic reserves have shown that chromium is a most critical element within the U.S. metal industry. More precisely, the bulk of chromium is consumed in the production of stainless steels, specifically Type 304 stainless steel (304SS) which contains 18% Cr. The present paper deals with means of reducing chromium in commercial stainless steels by substituting more abundant or less expensive elements with the intent of maintaining the properties of 304SS. The discussion focuses on some of the oxidation and corrosion properties of new substitute stainless steels with only 12% Cr, which represents a potential saving of 33% of the chromium consumed in the production of 304SS. The alloying elements substituted for Cr in 304SS are selected according to their potential for protective oxide formation during high-temperature oxidation; these are Al, Si, Ti, Y, and misch metal which is 99.7% rare-earth metals containing 50 to 55% cerium. Other alloying elements to impart corrosion resistance are Mn, Mo, and V.

Stephens, J. R.↗

Magma oceanography. I - Thermal evolution

Fractional crystallization and flotation of cumulate plagioclase in a cooling 'magma ocean' provides the simplest explanation for early emplacement of a thick feldspar-rich lunar crust. The complementary mafic cumulates resulting from the differentiation of such a magma ocean have been identified as the ultimate source of mare basalt liquids on the basis or rare-earth abundance patterns and experimental petrology studies. A study is conducted concerning the thermal evolution of the early differentiation processes. A range of models of increasing sophistication are considered. The models developed contain the essence of the energetics and the time scale for magma ocean differentiation. Attention is given to constraints on a magma ocean, modeling procedures, single-component magma oceans, fractionating magma oceans, and evolving magma oceans.

Solomon, S. C.↗

On high-alumina mare basalts

Aluminous mare basalts have been found at several lunar sites, although they are not abundant. A group of crystalline clasts in breccia 14063 are also aluminous mare basalts with higher TiO2, Na2O, Mg/Fe ratio and lower FeO than other aluminous mare basalts. Composition of ilmenite clinopyroxene, and plagioclase confirm that crystallization took place from a melt with high TiO2 and Mg/Fe. A review of ages and siderophile trace-element abundances for aluminous mare basalts, suggests they are not hybrid rocks produced by melting of a mare + terra rock mix, but are pristine igneous melts from the lunar interior. Consideration of rare-earth element abundances indicate the source for aluminous mare basalts is pyroxenitic, with variable clinopyroxene/orthopyroxene ratio, and is not significantly different from the sources(s) of normal mare basalts.

Ridley, W. I.↗

On the origin of high-Ti mare basalts

Analyses were conducted of sixteen Apollo 17 mare basalts for alkali, alkaline-earth, and rare-earth elements, Co, and Sc. The obtained data were utilized in a study concerning the nature of the igneous processes responsible for the chemical variations among the high-Ti, low-K basalts. Estimates were obtained regarding the abundances of the large-ion, lithophile elements in the source regions for the basalts. It is shown that the source regions could plausibly have been produced by processes believed to have occurred during the early history of the moon. Attention is given to chemical variations among the Apollo 17 mare basalts, near-surface (low-pressure) crystal fractionation, partial melting, limits on the extent of partial melting, and a summary of possible events leading to formation of high-Ti mare basalts.

Shih, C.-Y.↗

The origin of KREEP

KREEP is a lunar material having very high concentrations of incompatible elements; its name is an acronym for the incompatibles K, rare-earth elements (REE), and P. Although a few pristine (endogenously igneous) KREEPy samples were returned from the Apollo 15 and 17 sites, most KREEPy samples are polymict breccias. Most models of KREEP petrogenesis have been based on partial melting of a variety of sources. Such models fail to explain the veritable absence of variations in incompatible element patterns over the sampled portion of the moon. We have defined a KREEP component based on the average composition of Apollo 14 breccias having extremely high concentrations of incompatible elements. Normalization of accurate incompatible data for KREEPy samples from the Apollo 12, 14, 15, 16, and 17 sites to this component virtually always shows no resolvable fractionation (e.g., <10% variation in the La/Lu ratio), whereas partial melting models typically produce larger fractionations (±20–25% in La/Lu) from a factor of 2 difference in degree of partial melting. Required is a single major source that could provide KREEP to widely separated locations on the nearside of the moon. The anorthositic crust of the moon is commonly attributed to the flotation of plagioclase on a deep, moon-wide magma ocean. Fractional crystallization of this magma ocean would have produced large enrichments of incompatibles in a residual liquid. No other plausible major source of incompatibles has been proposed. We borrow the German prefix ur—meaning primeval and designate this residual liquid ‘urKREEP.’ We propose that all KREEPy rocks originated by dilution of urKREEP with crustal or mantle materials during assimilation, or zone-refining (pristine samples), or impact-induced brecciation (breccias and melt rocks). The formation of urKREEP cannot be dated precisely. Correction of breccia Rb-Sr model ages for Rb loss or gain during the early intense bombardments yields ages that cluster in the range 4.4–4.5 Gy. This implies that crystallization of the magma ocean was essentially complete at this time and is in general agreement with U-Pb evidence indicating crustal formation at 4.4 Gy. Assuming that the moon had the composition of an H-group chondrite depleted in Fe-Ni and FeS and that half the incompatibles fractionated into materials other than urKREEP, the thickness of a moon-wide urKREEP layer was <2 km. Thorium concentrations determined by gamma ray spectroscopy indicate that about 4% of the incompatibles in an H chondritic moon are now in the outermost kilometer.

Paul H. Warren↗

Trace element partitioning between ionic crystal and liquid

The partitioning of trace elements between ionic crystals and the melt has been correlated with lattice energy of the host. The solid-liquid partition coefficient has been expressed in terms of the difference in relative ionic radius of the trace element and the homogeneous and heterogeneous strain of the host lattice. Predictions based on this model appear to be in general agreement with data for alkali nitrates and for rare-earth elements in natural garnet phenocrysts.

Tsang, T.↗

Trace element composition of Luna 24 Crisium VLT basalt

The origins of the individual particles analyzed from the Luna 24 core and the information they provide on the trace-element composition of Mare Crisium basalt are considered. Previous analyses of several Luna 24 soil fragments are reviewed. It is concluded that: (1) the average trace-element concentrations for 12 VLT basalt fragments are the best available estimates for bulk samples of Crisium VLT basalt; (2) there is weak evidence that the average Crisium basalt might have a small positive Eu anomaly relative to chondritic matter; (3) the soils contain components from sources other than the Crisium VLT basalt; and (4) there is no convincing information in concentrations of rare-earth elements, Co, Sc, FeO, or Na2O among the analyzed fragments to indicate more than one parent basalt.

Haskin, L. A.↗

The ultraviolet flux distribution of Alpha-2 Canum Venaticorum

Intermediate- and narrow-band UV spectrophotometry from Copernicus, OAO 2, the S2-68 experiment on TD 1, and a sounding-rocket experiment are combined with ground-based observations to define the absolute flux distribution of the bright magnetic Ap star Alpha-2 CVn over the wavelength range from 1030 to 7580 A. Two flux distributions are presented which coincide more or less with the rare-earth maximum and minimum in the star's cycle. The results are compared with those for two normal stars, the UV variability of Alpha-2 CVn is characterized as a function of wavelength, and non-LTE effects on the UV continua of C I and Si I are analyzed. Some physical properties of Alpha-2 CVn are estimated, and the evolutionary age of the star is estimated to be between 220 million and 300 million years. It is concluded that Alpha-2 CVn is old enough to have been magnetically braked to its current rotational velocity by either the centrifugal-wind or the accretion mechanism and to have developed its chemical peculiarities by either mechanism.

Leckrone, D. S.↗

Experimental partitioning of rare earth elements and scandium among armalcolite, ilmenite, olivine and mare basalt liquid

An experimental study was carried out to measure partition coefficients for two rare-earth elements (Sm and Tm) and Sc among armalcolite, ilmenite, olivine and liquid coexisting in a system modeled on high-Ti mare basalt 74275. This 'primitive' sample was chosen for study because its major and trace element chemistry as well as its equilibrium phase relations at atmospheric pressure are known from previous studies. Beta-track analytical techniques were used so that partition coefficients could be measured in an environment whose bulk trace element composition is similar to that of the natural basalt. Partition coefficients for Cr and Mn were determined in the same experiments by microprobe analysis. The only equilibrium partial melting model appears to be one in which ilmenite is initially present in the source region but is consumed by melting before segregation of the high-Ti mare basalt liquid from the residue.

Irving, A. J.↗