SEARCH · Engineering Papers
Results for “Radio frequency.”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Nonlinear frequency coupling in dual radio-frequency driven atmospheric pressure plasmas
Plasma ionization, and associated mode transitions, in dual radio-frequency driven atmospheric pressure plasmas are governed through nonlinear frequency coupling in the dynamics of the plasma boundary sheath. Ionization in low-power mode is determined by the nonlinear coupling of electron heating and the momentary local plasma density. Ionization in high-power mode is driven by electron avalanches during phases of transient high electric fields within the boundary sheath. The transition between these distinctly different modes is controlled by the total voltage of both frequency components.
Dependence of the residual surface resistance of superconducting radio frequency cavities on the cooling dynamics around T{sub c}
We report a strong effect of the cooling dynamics through T{sub c} on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120 °C baking and nitrogen doping. Direct magnetic field measurements on the cavity walls show that the effect stems from changes in the flux trapping efficiency: slow cooling leads to almost complete flux trapping and higher residual resistance, while fast cooling leads to the much more efficient flux expulsion and lower residual resistance.
Direct-current effects on magnetization reversal properties of submicron-size Permalloy patterns for radio-frequency devices
Ferromagnetic resonance (FMR) spectroscopy is used to measure direct-current (dc) effects on the magnetization reversal properties of submicron-sized lateral patterned magnetic material. The observed FMR frequency-field relationship shows that for both 240 and 550 nm wide Permalloy (Py) nanowires the coercivity is reduced by {approx}33% when a 50 mA dc passes through the transmission line where the nanowires are incorporated. The temperature dependence of the coercivity has a {radical}(T) relationship which suggests the coherent rotation mode tendency in such 100 nm thick Py nanowires.
Solar emission levels at low radio frequencies
Solar radio emission could seriously interfere with observations made by a low frequency (1 to 10 MHz) array in space. International Sun-Earth Explorer (ISEE-3) radio data were used to determine solar emission level. The results indicate that solar emission should seriously disturb less than ten percent of the data, even during the years of solar maximum. Thus it appears that solar emission should not cause a disastrous loss of data. The information needed to design procedures to excise solar interference from the data produced by any low-frequency array is provided.
A new possibility for production of sub-picosecond x-ray pulses using a time dependent radio frequency orbit deflection
Explore the source record for details and available documents.
Excitation frequency dependent mode manipulation in radio-frequency atmospheric argon glow discharges
An experimental investigation is presented to characterize the dependence of discharge operation modes ({alpha} and {gamma} modes) and their transition on excitation frequency in radio-frequency atmospheric argon glow discharges. The current-voltage characteristics are used to distinguish the {alpha} and {gamma} modes at an excitation frequency range of 5-24 MHz. The operation regime of {alpha} mode with stable and uniform discharge in large volume is found to expand at higher excitation frequency. It is shown that, when excitation frequency is below 10 MHz, the discharge evolves directly into {gamma} mode after gas breakdown and, when excitation frequency is above 10 MHz, the discharge operates in the coexistence mode of {alpha} and {gamma} after mode transition.
Automated Work Packages: Radio Frequency Identification, Bluetooth Beacons, and Video Applications in the Nuclear Power Industry
The need to move conventional paper-based work packages into an electronic state motivated the development of a large span of electronic work package forms that ranged from simple Portable Document Format (PDF) files to adaptive and intelligent electronic forms. In parallel to this development, the Department of Energy Light Water Reactor Sustainability Program (LWRS) initiated the automated work package as a pilot project to evaluate implementing state of the art automation techniques into the work package process to improve the economic and safety of the work process. Through a multiple year’s effort, the automated work package project have developed a vision of the future work package that relies on automation in all critical and human factor challenging tasks. The vision identified gaps in the work process, the means to automate them, and evaluated the implementation, feasibility and benefits of these means. This was conducted through continues engagement with the nuclear power industry. The aim of this report is to study the potential of three automation technologies, which have been advancing in various industries, in the current work process of nuclear power plants. The study is to determine the feasibility and benefits of incorporating the technologies and determine potential gaps, if any, that need to be addressed to facilitate deployment of the studied technologies. The three automation technologies identified for this effort are ultra-high frequency (UHF) radio frequency identification (RFID), Bluetooth low energy (BLE) beacons, and video monitoring and recording. As part of this effort, the Idaho National Laboratory (INL) collaborated with Xcel Energy Inc. to evaluate these technologies. During the research and development scope of the effort, INL engaged Xcel Energy Inc. periodically and exchanged valuable insight on the means to implement these technologies in a nuclear power plant. Multiple pilot prototypes were developed and tested in a user study conducted at Xcel Energy Inc. in Minneapolis, Minnesota. The outcome of this effort resulted in significant findings that included the detailed means to custom fit the technologies to fit the nuclear power industry need, and identifying and evaluating several applications of high economic or safety potential. The limitations and obstacles that could impact deployment of the technologies were also identified, and the means of how to address these limitations and obstacles were studied.
Topological and Dynamical Representations for Radio Frequency Signal Classification
Radio Frequency (RF) signals are found throughout our world, carrying over-the-air information for both digital and analog uses with applications ranging from WiFi to the radio. One area of focus in RF signal analysis is determining the modulation schemes employed in these signals which is crucial in many RF signal processing domains from secure communication to spectrum monitoring. This work investigates the accuracy and noise robustness of novel Topological Data Analysis (TDA) and dynamic representation based approaches paired with a small convolution neural network for RF signal modulation classification with a comparison to state-of-the-art deep neural network approaches. We show that using TDA tools, like Vietoris-Rips and lower star filtrations, and the Takens' embedding in conjunction with a standard shallow neural network we can capture the intrinsic dynamical, geometric, and topological features of the underlying signal's manifold, offering informative representations of the RF signals. Our approach is effective in handling the modulation classification task and is notably noise robust, outperforming the commonly used deep neural network approaches in mode classification. Moreover, our fusion of dynamical and topological information is able to attain similar performance to deep neural network architectures with significantly smaller training datasets.
Complex Signal Kurtosis and Independent Component Analysis for Wideband Radio Frequency Interference Detection
Radio-frequency interference (RFI) has negatively implicated scientific measurements across a wide variation passive remote sensing satellites. This has been observed in the L-band radiometers SMOS, Aquarius and more recently, SMAP [1, 2]. RFI has also been observed at higher frequencies such as K band [3]. Improvements in technology have allowed wider bandwidth digital back ends for passive microwave radiometry. A complex signal kurtosis radio frequency interference detector was developed to help identify corrupted measurements [4]. This work explores the use of ICA (Independent Component Analysis) as a blind source separation technique to pre-process radiometric signals for use with the previously developed real and complex signal kurtosis detectors.
NASA Radio Frequency Spectrum Management Manual
The Radio Frequency (RF) Spectrum Management Manual sets forth procedures and guidelines for the management requirements for controlling the use of radio frequencies by the National Aeronautics and Space Administration. It is applicable to NASA Headquarters and field installations. NASA Management Instruction 1102.3 assigns the authority for management of radio frequencies for the National Aeronautics and Space Administration to the Associate Administrator for Space Operations, NASA Headquarters. This manual is issued in loose-leaf form and will be revised by page changes.
Mechanical properties of niobium radio-frequency cavities
Radio-frequency cavities made of bulk niobium are one of the components used in modern particle accelerators. The mechanical stability is an important aspect of cavity design, which typically relies on finite-element analysis simulations using material properties from tensile tests on sample. This contribution presents the results of strain and resonant frequency measurements as a function of a uniform pressure up to 722 kPa, applied to single-cell niobium cavities with different crystallographic structure, purity and treatments. In addition, burst tests of high-purity multi-cell cavities with different crystallographic structure have been conducted up to the tensile strength of the material. Finite-element analysis of the single-cell cavity geometry is in good agreement with the observed behavior in the elastic regime assuming a Young's modulus value of 88.5 GPa and a Poisson's ratio of 0.4, regardless of crystallographic structure, purity or treatment. However, the measured yield strength and tensile strength depend on crystallographic structure, material purity and treatment. In particular, the results from this study show that the mechanical properties of niobium cavities with large crystals are comparable to those of cavities made of fine-grain niobium.
Simultaneous catalyst deposition and growth of aligned carbon nanotubes on SiO{sub 2}/Si substrates by radio frequency magnetron sputtering
Radio frequency magnetron sputtering has been used for the synthesis of aligned carbon nanotubes (CNTs) on a SiO{sub 2}/Si substrate, with simultaneous in situ catalyst deposition. This method allows the use of substrates without the need of a surface predeposition of catalytic particles. In particular, among the metals considered, we observed the formation of CNTs using W or Ni as catalysts. Only in the case of Ni did we find that the CNTs are aligned along the target-substrate direction, unlike the randomly oriented CNTs observed when W was used as catalyst. Scanning and transmission electron microscopies show that the catalytic Ni nanoparticle is found mostly on the tip of the obtained bamboolike CNTs, while W nanoparticles are encapsulated inside hollow nanotubes, at different points along their length. We ascribe not only the observed structural differences to the size of the W and Ni particles but also to a different diffusion behavior of C in the two kinds of metallic clusters.
Ultra-sensitive high-density Rb-87 radio-frequency magnetometer
Radio-frequency (RF) atomic magnetometers (AMs) can be used in many applications, such as magnetic resonance imaging and nuclear quadrupole resonance. High-density AMs provide both superior sensitivity and large bandwidth. Previously, high-density potassium AMs were demonstrated, but these magnetometers have various disadvantages, such as high-temperature of operation and bulky design. We demonstrate a rubidium-87 RF AM with 5 fT/Hz{sup 1/2} sensitivity (3 fT Hz{sup 1/2} probe noise), which is comparable to that of the best potassium magnetometers. Our magnetometer also features a simple fiber-optic design, providing maximum flexibility for magnetic-field measurements.
Direct current magnetic Hall probe technique for measurement of field penetration in thin film superconductors for superconducting radio frequency resonators
Superconducting Radio Frequency (SRF) cavities used in particle accelerators are typically formed from or coated with superconducting materials. Currently, high purity niobium is the material of choice for SRF cavities that have been optimized to operate near their theoretical field limits. This brings about the need for significant R & D efforts to develop next generation superconducting materials that could outperform Nb and keep up with the demands of new accelerator facilities. To achieve high quality factors and accelerating gradients, the cavity material should be able to remain in the superconducting Meissner state under a high RF magnetic field without penetration of quantized magnetic vortices through the cavity wall. Therefore, the magnetic field at which vortices penetrate a superconductor is one of the key parameters of merit of SRF cavities. Techniques to measure the onset of magnetic field penetration on thin film samples need to be developed to mitigate the issues with the conventional magnetometry measurements that are strongly influenced by the film orientation and shape and edge effects. In this work, we report the development of an experimental setup to measure the field of full flux penetration through films and multi-layered superconductors. Our system combines a small superconducting solenoid that can generate a magnetic field of up to 500 mT at the sample surface and three Hall probes to detect the full flux penetration through the superconductor. We report this setup can be used to study alternative materials that could potentially outperform niobium, as well as superconductor–insulator–superconductor (SIS) multilayer coatings on niobium.
Demonstration of sub-GV/m accelerating field in a photoemission electron gun powered by nanosecond 𝑋-band radio-frequency pulses
Radio-frequency (rf) photoemission electron guns operating at higher accelerating gradients offer a pathway to produce brighter electron bunches. Brighter beams are expected to revolutionize many areas of science: they could form the backbone of next-generation compact x-ray free-electron lasers or provide coherent ultrafast quantum electron probes. We report on the experimental demonstration of an rf photoemission electron source supporting an accelerating field close to 400 MV/m at the photocathode surface without major rf breakdown or significant dark current over a 3-week experimental run. This unprecedented gradient was achieved by operating the gun in a new regime with short rf pulses, ~9ns X-band (11.7 GHz). The demonstrated paradigm provides a viable path to form relativistic electron beams with unprecedented brightness.
Laser polishing of niobium for application to superconducting radio frequency cavities
Superconducting radio frequency niobium cavities are at the heart of an increasing number of particle accelerators. Their performance is dominated by a several nanometer thick layer at the interior surface. Maximizing the smoothness of this surface is critical, and aggressive chemical treatments are now employed to this end. The authors describe laser-induced surface melting as an alternative 'greener' approach. Selection of laser parameters guided by modeling achieved melting that reduced the surface roughness from the fabrication process. The resulting topography was examined by scanning electron microscope and atomic force microscope (AFM). Plots of power spectral density computed from the AFM data give further insight into the effect of laser melting on the topography of the mechanically polished (only) niobium.
Three-dimensional self-consistent simulations of multipacting in superconducting radio frequency cavities
Superconducting radio frequency (SRF) cavities are a popular choice among researchers designing new accelerators because of the reduced power losses due to surface resistance. However, SRF cavities still have unresolved problems, including the loss of power to stray electrons. Sources of these electrons are field emission from the walls and ionization of background gas, but the predominant source is secondary emission yield (SEY) from electron impact. When the electron motion is in resonance with the cavity fields the electrons strike the cavity surface repeatedly creating a resonant build up of electrons referred to as multipacting. Cavity shaping has successfully reduced multipacting for cavities used in very high energy accelerators. However, multipacting is still a concern for the cavity power couplers, where shaping is not possible, and for cavities used to accelerate particles at moderate velocities. This Phase II project built upon existing models in the VORPAL simulation framework to allow for simulations of multipacting behavior in SRF cavities and their associated structures. The technical work involved allowed existing models of secondary electron generation to work with the complex boundary conditions needed to model the cavity structures. The types of data produced by VORPAL were also expanded to include data common used by cavity designers to evaluate cavity performance. Post-processing tools where also modified so provide information directly related to the conditions that produce multipacting. These new methods were demonstrated by running simulations of a cavity design being developed by researchers at Jefferson National Laboratory to attempt to identify the multipacting that would be an issue for the cavity design being considered. These simulations demonstrate that VORPAL now has the capabilities to assist researchers working with SRF cavities to understand and identify possible multipacting issues with their cavity designs.