Bringing minimal routing back to HPC through silicon photonics: a study of "flexfly" architectures with the structural simulation toolkit (SST)
Abstract not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided.
Complex oxides and semiconductors exhibit distinct yet complementary properties owing to their respective ionic and covalent natures. By electrically coupling complex oxides to traditional semiconductors within epitaxial heterostructures, enhanced or novel functionalities beyond those of the constituent materials can potentially be realized. Essential to electrically coupling complex oxides to semiconductors is control of the physical structure of the epitaxially grown oxide, as well as the electronic structure of the interface. In this paper, we discuss how composition of the perovskite A- and B-site cations can be manipulated to control the physical and electronic structure of semiconductor—complex oxide heterostructures. Two prototypical heterostructures, Ba 1-x Sr x TiO 3 /Ge and SrZr x Ti 1-x O 3 /Ge, will be discussed. In the case of Ba 1-x Sr x TiO 3 /Ge, we discuss how strain can be engineered through A-site composition to enable the re-orientable ferroelectric polarization of the former to be coupled to carriers in the semiconductor. In the case of SrZr x Ti 1-x O 3 /Ge we discuss how B-site composition can be exploited to control the band offset at the interface. Finally, analogous to heterojunctions between compound semiconducting materials, control of band offsets, i.e., band-gap engineering, provides a pathway to electrically couple complex oxides to semiconductors to realize a host of functionalities.
The U.S. Department of Energy (DOE) is considering use of rail transport for future shipments of commercial spent nuclear fuel (SNF) from where it currently resides to storage or disposal facilities. Rail carriers transporting in commerce certain quantities of 'rail security sensitive materials,' including SNF, face a regulatory requirement from the U.S. Department of Transportation to perform route risk assessments on an annual basis. In performing these assessments, each affected rail carrier must take into consideration twenty-seven different route factors, and document its rationale for selecting preferred and alternative routes on the basis of the safety and security risk analysis results. The major freight rail carriers operating in the U.S. have invested in the development of a proprietary tool, for rail carrier use only, to assist them in making route selections. This tool utilizes operations data input by each affected rail carrier in conjunction with geographic information systems (GIS) data to represent proximate risk factors, to be integrated and assigned to individual points and segments on the railroad network. Separate safety and security risk values are generated for each rail route under consideration. These values are then placed on an equivalent scoring basis and summed together to allow direct comparison between different route options and to rank order each route in terms of its relative attractiveness. Each affected rail carrier files an annual report for evaluation by the Federal Railroad Administration (FRA) that documents its route risk assessment approach and analysis results. DOE has developed its own decision-support tool, Stakeholder Tool for Assessing Radioactive Transportation (START), which is capable of generating and analyzing routing options for transporting SNF by rail in addition to other freight modes. To better understand how affected rail carriers are likely to route SNF shipments in accordance with regulatory requirements and those route factors likely to be most influential in impacting DoE's evaluation of alternative SNF rail routes, a study was undertaken by DOE with the following objectives: - Review the shipment routes that have been historically used by rail carriers to move high hazard materials, including SNF; - Identify the physical, operational and proximate characteristics (attributes) associated with the rail segments that comprise these routes; - Evaluate the relationships between these attributes; - Make suggestions for how to streamline the factors used in DoE's rail route evaluations; - Contrast these relationships with how the factors are used by the rail carriers in applying their tool This paper describes the study approach, analysis results, and implications for rail route selection methodology. Differences between this evaluation and railroad industry information about rail route assessments are also discussed. (authors)
The Department of Energy (DOE) has a historic programmatic interest in the safe and secure routing, tracking, and transportation risk analysis of radiological materials in the United States. In order to address these program goals, DOE has funded the development of several tools and related systems designed to provide insight to planners and other professionals handling radioactive materials shipments. These systems include the WebTRAGIS (Transportation Routing Analysis Geographic Information System) platform. WebTRAGIS is a browser-based routing application developed at Oak Ridge National Laboratory (ORNL) focused primarily on the safe transport of spent nuclear fuel from US nuclear reactors via railway, highway, or waterway. It is also used for the transport planning of low-level radiological waste to depositories such as the Waste Isolation Pilot Plant (WIPP) facility. One particular feature of WebTRAGIS is its coupling with high-resolution population data from ORNL s LandScan project. This allows users to obtain highly accurate population count and density information for use in route planning and risk analysis. To perform the routing and risk analysis WebTRAGIS incorporates a basic routing model methodology, with the additional application of various constraints designed to mimic US Department of Transportation (DOT), DOE, and Nuclear Regulatory Commission (NRC) regulations. Aside from the routing models available in WebTRAGIS, the system relies on detailed or specialized modal networks for the route solutions. These include a highly detailed network model of the US railroad system, the inland and coastal waterways, and a specialized highway network that focuses on the US interstate system and the designated hazardous materials and Highway Route Controlled Quantity (HRCQ) -designated roadways. The route constraints in WebTRAGIS rely upon a series of attributes assigned to the various components of the different modal networks. Routes are determined via a constrained shortest-path Dijkstra algorithm that has an assigned impedance factor. The route constraints modify the various impedance weights to bias or prefer particular network characteristics as desired by the user. Both the basic route model and the constrained impedance function calculations are determined by a series of network characteristics and shipment types. The study examines solutions under various constraints modeled by WebTRAGIS including possible routes from select shut-down reactor sites in the US to specific locations in the US. For purposes of illustration, the designated destinations are Oak Ridge National Laboratory in Tennessee and the Savannah River Site in South Carolina. To the degree that routes express sameness or variety under constraints serves to illustrate either a) the determinism of particular transport modes by either configuration or regulatory compliance, and/or b) the variety of constrained routes that are regulation compliant but may not be operationally feasible.
In this work, we consider compact routing schemes in networks of low doubling dimension, where the doubling dimension is the least value α such that any ball in the network can be covered by at most 2 α balls of half radius. There are two variants of routing-scheme design: (i) labeled (name-dependent) routing, in which the designer is allowed to rename the nodes so that the names (labels) can contain additional routing information, for example, topological information; and (ii) name-independent routing, which works on top of the arbitrary original node names in the network, that is, the node names are independent of the routing scheme. In this article, given any constant ε ϵ (0, 1) and an n-node edge-weighted network of doubling dimension α ϵ O(loglog n), we present —a (1 + ε)-stretch labeled compact routing scheme with Γlog n-bit routing labels, O(log 2 n/loglog n)-bit packet headers, and ((1/ε) O(α) log 3 n)-bit routing information at each node; —a (9 + ε)-stretch name-independent compact routing scheme with O(log 2 n/loglog n)-bit packet headers, and ((1/ε) O(α) log 3 n)-bit routing information at each node. In addition, we prove a lower bound: any name-independent routing scheme with o(n (ε/60)2 ) bits of storage at each node has stretch no less than 9 - ε for any ε ϵ (0, 8). Therefore, our name-independent routing scheme achieves asymptotically optimal stretch with polylogarithmic storage at each node and packet headers. Note that both schemes are scale-free in the sense that their space requirements do not depend on the normalized diameter Δ of the network. Finally, we also present a simpler nonscale-free (9 + ε)-stretch name-independent compact routing scheme with improved space requirements if Δ is polynomial in n.
Battery electric buses (BEBs) are increasingly being embraced by transit agencies as an energy-efficient and emission-free alternative to bus fleets. However, because of the limitations of battery technology, BEBs suffer from limited driving range, great battery cost, and time-consuming charging processes. On-route fast charging technology is gaining popularity as a remedy, reducing battery cost, extending driving range, and reducing charging time. With on-route fast charging, BEBs are as capable as their diesel counterparts in relation to range and operating time. However, transit agencies may have the following concerns about on-route fast charging: 1) on-route fast charging stations require massive capital costs; 2) on-route fast charging may lead to high electricity power demand charges; and 3) charging during peak hours may increase electricity energy charges. This study conducts a quantitative economic analysis of on-route fast charging for BEBs, thereby providing some guidelines for transit agencies. An integrated optimization model is first proposed to determine battery size, charger type, and recharging schedule for a general BEB route. Based on the model, an economic analysis of on-route fast charging is then performed on 10 real-world bus routes and a simplified general bus route with different parameters. The results demonstrate that given the current prices of on-route fast charging stations and batteries, it is always beneficial to install on-route fast charging stations for BEBs. A sensitivity analysis is also conducted to show the impact of potential price reductions of batteries.
This paper develops a multi-objective eco-routing algorithm (combined eco- and travel time-optimum routing) for battery electric vehicles (BEVs) and internal combustion engine vehicles (ICEVs) and investigates the network-wide impacts of the proposed multi-objective Nash optimum (user equilibrium) traffic assignment on a large-scale network. Eco-routing is a technique that finds the most energy efficient route. ICEV and BEV energy consumption patterns are significantly different with regard to their sensitivity to driving cycles. Unlike ICEVs, BEVs are more energy efficient on low-speed arterial trips compared to highway trips. Different energy consumption patterns require different eco-routing strategies for ICEVs and BEVs. This study found that single objective eco-routing could significantly reduce the energy consumption of BEVs but also significantly increase their average travel time. Consequently, the study developed a multi-objective routing model (eco- and travel time-routing) to improve both energy and travel time measures. The model introduced a link cost function that uses the specification of the value of time and the cost of fuel/energy. The simulation study found that multi-objective routing could reduce the BEV energy consumption by 13.5%, 14.2%, 12.9%, and 10.7%, as well as ICEV fuel consumption by 0.1%, 4.3%, 3.4%, and 10.6% for “not congested, “slightly congested,” “moderately congested,” and “highly congested” conditions, respectively. The study also found that multi-objective user equilibrium routing reduced the average vehicle travel time by up to 10.1% compared to the standard user equilibrium traffic assignment for highly congested conditions, producing a solution closer to the system optimum traffic assignment. The results indicate that the proposed multi-objective eco-routing strategy can reduce vehicle fuel/energy consumption effectively with minimum impacts on travel times for both BEVs and ICEVs.
In the future, it will be necessary to transport large quantities of spent nuclear fuel (SNF) from nuclear power plant sites to an interim storage facility (ISF) or a repository when such a facility is available. Because it is impossible to shield all of the radiation from this material, the general public will receive a very small, but quantifiable, dose from this transportation campaign. This paper describes the estimated collective effective radiation dose to the public due to SNF shipments under routine conditions and compares the estimated dose figures to the natural background radiation dose. To determine the estimated collective effective dose to the public, this analysis uses the US Department of Energy's (DOE) Stakeholder Tool for Assessing Radioactive Transportation (START), a geographic information system (GIS) routing tool, and a set of unit dose factors (UDFs) which were developed to calculate the estimated dose to the public along transportation routes. The estimated doses of radiation to which the public would be exposed during shipments of SNF is expected to be a consideration, along with many other factors, when making routing decisions. In all cases studied in this paper, estimated doses to the public will be orders of magnitude lower than the natural background radiation dose and will meet all US federal regulatory requirements for radiation dose/exposure to members of the public. The sample routes analyzed in this paper are expected to be representative of future SNF shipment routes in terms of length and mode of transportation, although they do not represent actual routes or destinations. This paper considers four routes from two shutdown reactor sites to two destinations. It must be noted that the specified origin sites are not necessarily the first sites under consideration for a de-inventory process. Further, the destination sites reviewed in this report are only to illustrate estimated dose figures along different routes and should not be taken as potential sites for an ISF or repository. For illustrative purposes only, the shortest distance rail route was found between each origin and destination point, and the collective effective dose to the public from the SNF cask was estimated along each route. This paper is not intended to make recommendations for routing decisions, but rather is intended to inform further discussion about the transportation of SNF and other radioactive materials.
A technique includes receiving a packet at a network device, wherein the packet is to be routed in a network to a destination network device; determining a plurality of candidate routes for the packet to be routed to the destination network device; grouping the plurality of candidate routes into a first set of candidate routes and a second set of candidate routes based on hop counts associated with the plurality of candidate routes; selecting one of the first or second sets based on a congestion metric threshold; selecting a candidate route from the selected first or second set based on weight metric values associated with the candidate routes of the selected first or second set; and selecting an egress port associated with the selected candidate route.
To implement arbitrary quantum circuits in architectures with restricted interactions, one may effectively simulate all-to-all connectivity by routing quantum information. We consider the entanglement dynamics and routing between two regions only connected through an intermediate “bottleneck” region with few qubits. In such systems, where the entanglement rate is restricted by a vertex boundary rather than an edge boundary of the underlying interaction graph, existing results such as the small incremental entangling theorem give only a trivial constant lower bound on the routing time (the minimum time to perform an arbitrary permutation). We significantly improve the lower bound on the routing time in systems with a vertex bottleneck. Specifically, for any system with two regions 𝐿,𝑅 with 𝑁 𝐿 ,𝑁 𝑅 qubits, respectively, coupled only through an intermediate region 𝐶 with 𝑁 𝐶 qubits, for any 𝛿 > 0 we show a lower bound of Ω(𝑁$^{1−𝛿}_{𝑅}$/√𝑁 𝐿 𝑁 𝐶 ) on the Hamiltonian quantum routing time when using piecewise time-independent Hamiltonians, or time-dependent Hamiltonians subject to a smoothness condition. We also prove an upper bound on the average amount of bipartite entanglement between 𝐿 and 𝐶,𝑅 that can be generated in time 𝑡 by such architecture-respecting Hamiltonians in systems constrained by vertex bottlenecks, improving the scaling in the system size from 𝑂(𝑁 𝐿 𝑡) to 𝑂(√𝑁 𝐿 𝑡). As a special case, when applied to the star graph (i.e., one vertex connected to 𝑁 leaves), we obtain an Ω(√𝑁 1−𝛿 ) lower bound on the routing time and on the time to prepare 𝑁/2 Bell pairs between the vertices. We also show that, in systems of free particles, we can route optimally on the star graph in time Θ(√𝑁) using Hamiltonian quantum routing, obtaining a speedup over gate-based routing, which takes time Θ(𝑁).
Highlights: • Dy{sub 2}O{sub 3} nanopowders were prepared by co-precipitation and eco-friendly green combustion route using plant latex. • Both the products show excellent chromaticity coordinates in the white region, which were quite useful for white LED’s. • Thermoluminescence response of the Dy{sub 2}O{sub 3} product prepared by green synthesis was higher when compared to co-precipitation route. • Structural parameters of Dy{sub 2}O{sub 3} were estimated using Rietveld refinement. • The development of nanosize materials using eco-friendly resources was an attractive non-hazardous chemical route. - Abstract: Dysprosium oxide (Dy{sub 2}O{sub 3}) nanopowders were prepared by co-precipitation (CP) and eco-friendly green combustion (GC) routes. SEM micrographs prepared by CP route show smooth rods with various lengths and diameters while, GC route show porous, agglomerated particles. The results were further confirmed by TEM. Thermoluminescence (TL) responses of the nanopowder prepared by both the routes were studied using γ-rays. A well resolved glow peak at 353 °C along with less intense peak at 183 °C was observed in GC route while, in CP a single glow peak at 364 °C was observed. The kinetic parameters were estimated using Chen’s glow peak route. Photoluminescence (PL) of Dy{sub 2}O{sub 3} shows peaks at 481, 577, 666 and 756 nm which were attributed to Dy{sup 3+} transitions of {sup 4}F{sub 9/2}⟶{sup 6}H{sub 15/2}, {sup 6}H{sub 13/2}, {sup 6}H{sub 11/2} and {sup 6}H{sub 9/2}, respectively. Color co-ordinate values were located in the white region as a result the product may be useful for the fabrication of WLED’S.
This paper develops a multi-objective eco-routing algorithm (eco- and travel time-optimum routing) for battery electric vehicles (BEVs) and internal combustion engine vehicles (ICEVs) and investigates the network-wide impacts of the proposed multi-objective Nash optimum (user equilibrium) traffic assignment on a large-scale network. Unlike ICEVs, BEVs are more energy efficient on low-speed arterial trips compared with highway trips. Different energy consumption patterns require different eco-routing strategies for ICEVs and BEVs. This study found that single-objective eco-routing could significantly reduce the energy consumption of BEVs but also significantly increase their average travel time. Consequently, the study developed a multi-objective routing model (eco- and travel time-routing) to improve both energy and travel time measures. The model introduced a link cost function that uses the specification of the value of time and the cost of fuel/energy. The simulation study found that multi-objective routing could reduce BEV energy consumption by 13.5%, 14.2%, 12.9%, and 10.7%, as well as ICEV fuel consumption by 0.1%, 4.3%, 3.4%, and 10.6% for “not congested, “slightly congested,”“moderately congested,” and “highly congested” conditions, respectively. The study also found that multi-objective user equilibrium routing reduced the average vehicle travel time by up to 10.1% compared with the standard user equilibrium traffic assignment for highly congested conditions, producing a solution closer to the system optimum traffic assignment. The results indicate that the proposed multi-objective eco-routing strategy can reduce vehicle fuel/energy consumption effectively with minimum impacts on travel times for both BEVs and ICEVs.
In 2012 and 2013, Pacific Northwest National Laboratory conducted a study that summarized the passage proportions and route-specific survival rates of steelhead kelts that passed through Federal Columbia River Power System (FCRPS) dams. To accomplish this, a total of 811 steelhead kelts were tagged with Juvenile Salmon Acoustic Telemetry System (JSATS) transmitters. Acoustic receivers, both autonomous and cabled, were deployed throughout the FCRPS to monitor the downstream movements of tagged-kelts. Kelts were also tagged with Passive Integrated Transponder tags to monitor passage through juvenile bypass systems and detect returning fish. The current study evaluated data collected in 2012 and 2013 to identify individual, behavioral, environmental and dam operation variables that were related to passage and survival of steelhead kelts that passed through FCRPS dams. Bayesian model averaging of multivariable logistic regression models was used to identify the environmental, temporal, operational, individual, and behavioral variables that had the highest probability of influencing the route of passage and the route-specific survival probabilities for kelts that passed Lower Granite (LGR), Little Goose (LGS), and Lower Monumental (LMN) dams in 2012 and 2013. The posterior probabilities of the best models for predicting route of passage ranged from 0.106 for traditional spill at LMN to 0.720 for turbine passage at LGS. Generally, the behavior (depth and near-dam searching activity) of kelts in the forebay appeared to have the greatest influence on their route of passage. Shallower-migrating kelts had a higher probability of passing via the weir and deeper-migrating kelts had a higher probability of passing via the JBS and turbines than other routes. Kelts that displayed a higher level of near-dam searching activity had a higher probability of passing via the spillway weir and those that did less near-dam searching had a higher probability of passing via the JBS and turbines. The side of the river in which kelts approached the dam and dam operations also affected route of passage. Dam operations and the size and condition of kelts were found to have the greatest effect on route-specific survival probabilities for fish that passed via the spillway at LGS. That is, longer kelts and those in fair condition had a lower probability of survival for fish that passed via the spillway weir. The survival of spillway weir- and deep-spill passed kelts was positively correlated with the percent of the total discharge that passed through turbine unit 4. Too few kelts passed through the traditional spill, JBS, and turbine units to evaluate survival through these routes. The information gathered in this study describes Snake River steelhead kelt passage behavior, rates, and distributions through the FCRPS as well as provide information to biologists and engineers about the dam operations and abiotic conditions that are related to passage and survival of steelhead kelts.
Safety issues associated with transporting crude oil by rail have been a concern since the boom of the U.S. domestic shale oil production in 2012. During the last decade, over 300 crude-oil-by-rail incidents have occurred in the United States. Some of them have caused adverse consequences including fire and hazardous materials leakage. However, only limited information on crude-on-rail routes and their associated risks is available to the public. To this end, this study proposed an unconventional way to reconstruct crude-on-rail routes using geotagged photos harvested from the Flickr website. The proposed method linked the geotagged photos of crude oil trains posted online with national railway networks to identify potential railway segments that those crude oil trains were traveling on. Here, a shortest path-based method was applied to infer the complete crude-on-rail routes, by utilizing the confirmed railway segments as well as their directional information. Validation of the inferred routes was performed using a public map and official crude oil incident data. The results suggested that the inferred routes based on geotagged photos had high coverage, with approximately 96% of the documented crude oil incidents aligned with the reconstructed crude-on-rail network. The inferred crude oil train routes were found to pass through several metropolitan areas of high population density, who were exposed to potential risk. These findings could improve situational awareness for policy makers and transportation planners. In addition, with the inferred routes, this study has established a good foundation for future crude oil train risk-analyses along the rail route.
New technologies, such as connected and automated vehicles, have attracted more and more researchers for improving the energy efficiency and environmental impact of current transportation systems. The green routing strategy instructs a vehicle to select the most fuel-efficient route before the vehicle departs. It benefits the current transportation system with fuel saving opportunity through identifying the greenest route. This paper introduces an evaluation framework for estimating benefits of green routing based on large-scale, real-world travel data. The framework has the capability to quantify fuel savings by estimating the fuel consumption of actual routes and comparing to routes procured by navigation systems. A route-based fuel consumption estimation model, considering road traffic conditions, functional class, and road grade is proposed and used in the framework. An experiment using a large-scale data set from the California Household Travel Survey global positioning system trajectory data base indicates that 31% of actual routes have fuel savings potential with a cumulative estimated fuel savings of 12%.
Highlights: • Wearable UFP and BC instrumentation was carried along whilst cycling 2 different commuting routes. • HR-ICP-MS provided elemental information on railway- and roadside-exposed routes. • Heart rate was tracked simultaneously to estimate the personal inhaled pollutant dose. • The bicycle highway route exhibited 300% lower BC and 20% lower UFP concentrations. • Elemental differences are observed between the considered commuting routes. Urban environments typically exhibit large atmospheric pollution variation, in both space and time. In contrast to traditional monitoring networks suffering from a limited spatial coverage, mobile platforms enable personalized high-resolution monitoring, providing valuable insights into personal atmospheric pollution exposure, and the identification of potential pollution hotspots. This study evaluated personal cyclist exposure to UFPs, BC and heavy metals whilst commuting near Antwerp, Belgium, by performing mobile measurements with wearable black carbon (BC) and ultrafine particle (UFP) instruments. Loaded micro-aethalometer filterstrips were chemically analysed and the inhaled pollutant dose determined from the exhibited heart rate. Considerable spatial pollutant variation was observed along the travelled routes, with distinct contributions from spatial factors (e.g. traffic intersections, urban park and market) and temporary events. On average 300% higher BC, 20% higher UFP and changing elemental concentrations are observed along the road traffic route (RT), when compared to the bicycle highway route (BH). Although the overall background pollution determines a large portion of the experienced personal exposure (in this case 53% for BC and 40% for UFP), cyclists can influence their personal atmospheric pollution exposure, by selecting less exposed commuting routes. Our results, hereby, strengthen the body of evidence in favour of further policy investments in isolated bicycle infrastructure.
The activation of dioxygen at typically isolated two-electron reduced centers can lead to the formation of electrophilic superoxo or peroxo species, providing an essential route to form reactive O 2 -derived species in biological, organometallic, and heterogeneous catalysts. Alternatively, O 2 activation can proceed via outer sphere routes, circumventing the formation of bound peroxo (OO*) species during oxidation catalysis by forming H 2 O 2 (g), which can react with another reduced center to form H 2 O. The electronic and binding properties of metal oxides that determine the relative rates of these activation routes are assessed here by systematic theoretical treatments using density functional theory (DFT). These methods are combined with conceptual frameworks based on thermochemical cycles and crossing potential models to assess the most appropriate descriptors for the activation barriers for each route using Keggin polyoxometalates as illustrative examples. In doing so, we show that inner sphere routes, which form OO* species via O 2 activation on the O-vacancies (*) formed in the reduction part of redox cycles, are mediated by early transition states that only weakly sense the oxide binding properties. Outer sphere routes form H 2 O 2 (g) via O 2 activation on OH pairs (H/OH*) formed by dissociation of H 2 O on O-vacancies; their rates and activation barriers reflect the rates of the first H-atom transfer from H/OH* to O 2 . The activation barriers for this H-transfer step depend on the binding energy of more weakly-bound H-atom in H/OH* pairs (HAE 2 ) and on the ˙OOH-surface interaction energy at its product state ($E_{int}$ 0 ). The $E_{int}$ 0 values are similar among oxides unless a large charge-balancing cation is present and interacts with radical ˙OOH; consequently, HAE 2 acts as an appropriate descriptor of the outer sphere dynamics. HAE 2 also determines the thermodynamics of H 2 O dissociation on O-vacancies, which influence the inner and outer sphere rates by setting the relative coverage of * and H/OH*. So these results, in turn, show that HAE 2 is a complete descriptor of the reactivity and selectivity of oxides for O 2 activation; the O-atoms in more reducible oxides (more negative HAE 2 ) exhibit a greater preference for the inner sphere routes and for the formation of electrophilic OO* intermediates that mediate epoxidation and O-insertion reactions during catalytic redox cycles. Large charge-balancing cations locally modify $E_{int}$ 0 values that determine the outer sphere rates and thus can be used to alter the preference of O-atoms to either inner or outer sphere routes.
The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. The products were characterized using high-temperature X-ray diffraction analysis (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal (TG/DTA) analysis. To investigate the phase composition and stoichiometry of compounds the unit cell parameters were refined by full-profile Rietveld XRD analysis. The morphology of products and its evolution during high-temperature treatment was examined by SEM analysis. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. The ceramic route requires a multi-stage high-temperature treatment to obtain zirconium and hafnium germanates of 95% purity or more. Also, there are strong diffusion limitations to obtain hafnium germanate Hf{sub 3}GeO{sub 8} by ceramic route. On the contrary, the co-precipitation route leads to the formation of nanocrystalline single phase germanates of stoichiometric composition at a relatively low temperatures (less than 1000 °C). The results of quantitative XRD analysis showed the hafnium germanates are stoichiometric compounds in contrast to zirconium germanates that form a set of solid solutions. This distinction may be related to the difference in the ion radii of Zr and Hf. - Graphical abstract: The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. Display Omitted - Highlights: • Zr and Hf germanates were synthesized by ceramic and co-precipitation routes. • The morphology of products depends on the synthesis parameters. • Zirconium germanates forms a set of solid solutions. • Hafnium germanates are stoichiometric compounds.