Office of fuel cycle technologies used fuel disposition campaign objectives, mission, plans, and activity status.
No abstract prepared.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
No abstract prepared.
Ideas on the application of polymers for the liquid radioactive waste immobilization go a way back, and the first studies in the area were published 30-40 years ago. One should admit that regardless of the fairly large number of publications appeared in the past years currently the interest in this work came down greatly. It was the successful assimilation and worldwide implementation of the LRW cementation technology caused a slump in the interest in polymers. But today it's safe to say that the situation slowly changes, particularly due to the market appearance of the high-tech polymers manufactured by Nochar Company, and unique properties of these polymers gradually raise the demand in various countries. The results of multiple experiments performed with the simulated solutions have passed the comprehensive tests with actual waste. The economic effect from the implementation of the new technology is defined by the volume reduction of waste coming onto the repository, by the decline in the cost of transportation and of the repository construction on account of cutting down the construction volume. Interesting results have been obtained during the search for the technical decisions that would allow using the polymer materials in the processing technology of the industrial toxic waste. One more promising area of the possible application of polymers should be pointed out. It is the application of polymer materials as the assets for the emergency damage control when the advantages of the polymers become obvious. (authors)
A new Raman spectroscopic system for in-situ identification of the composition of solid nuclear tank waste is being developed by collaborative effort between Pacific Northwest National Laboratory (PNNL) and EIC Laboratories, Inc. The recent advancements in Raman technology allow probing the chemical composition of the tank waste without sample collection. In the newly tested configuration, the Raman probe is installed on the top of the tank riser and sends the incident laser beam to the bottom of the tank, 10 - 70 feet away. The returning light containing chemical information is collected by the Raman probe and is transmitted via fiber optic cable to the spectrometer located outside the tank farm area. This dual remote technology significantly expands currently limited options for the safe rapid in-situ identification of the solid tank waste needed for the retrieval decisions. The developed Raman system was extensively tested for acceptability prior to tank farm deployment. This testing included calibration of the system with respect of the distance between the Raman probe and the sample, incident laser beam angle, and presence of the optical interferences. The Raman system was successfully deployed on Tank C-111 at the US DOE Hanford site. As the result of this deployment, the composition of the hardpan at the bottom of C-111 tank was identified. Further development of the dual-remote Raman technology will provide a significant safety enhancement eliminating the potential of personnel radiation exposure associated with the grab sample collection and expands options of the rapid and cost-effective in-situ chemical analysis of the tank waste. (authors)
Hot Isostatic Pressing (HIP) is a technology that has been around for 60+ years. By using high temperature and high gas pressure, dry metal and ceramic powders can be consolidated and a volume decrease can be achieved. This paper presents the efforts using the HIPing process at the Idaho National Laboratory to treat the calcine radioactive waste. Once loaded into collapsible canisters, the HIPing would be used to treat the waste before final disposal. The resulting volume reduction was shown to be 20-70% and the cost ratio vs vitrification is 1:1.74. (authors)
Disposal pathway for low and intermediate short-lived wastes (LILSL) was the first to be operational in France. Successive evolutions - from the Manche disposal facility, close by La Hague to the Aube disposal facility (East of France) - allowed a steady pace of operation to be reached both in terms of volumes, type of waste and packaging. After 25 years of operation the Andra's Aube disposal facility waste management plan is intended to assess how this approach can be updated as new needs and new issues are emerging as tritiated wastes or decommissioning wastes. The disposal system could evolve to meet these needs as far as waste management should indeed be considered in an overall approach. (authors)
Markers of nuclear waste deposits that can be understood through ten millennia have been proposed for preventing from inadvertent human intrusion. It is postulated that currently designed waste repository markers are likely to fail, and an alternative system of markers is proposed based on a praxeological device, i.e., a language-learning by- action device. The key challenge is how should we represent radioactivity in waste repositories in such a way that it is understood by anyone who encounters such markers? Namely, for an adequate interpretation, two issues have to be addressed: to accommodate differing world views, and inevitable changes in languages. What is required is an integrated system that allows us to communicate a complex and abstract concept to all people at all times. That is the goal of our praxeological device, a sign that links a person's actions (praxis) in a particular context to a communication system about those actions and that particular context. That means anyone who experiences such a praxeological device will understand the actions that s/he is about to perform will help her/him to learn the iconic language s/he is reading. (authors)
This paper discusses plans for implementing UK government policy for the safe geological disposal of higher activity radioactive waste. In order to progress the programme for geological disposal in the absence of a specific site, RWM has developed generic, illustrative disposal system designs for three host geological environments. These geological environments are typical of those being considered in other countries and have been chosen because they represent the range that may need to be addressed when developing the Geological Disposal Facility (GDF) for the UK. This paper provides an overview of the updated 2016 design of the UK geological disposal facility and describes the processes of construction, transport, waste package receipt, handling and emplacement and the design characteristics that the disposal facility will need to include for the waste inventory. The paper provides examples of the approach to ensure confidence in safety over the GDF life cycle and discusses the challenges in the design, construction and operation of a nationally significant infrastructure project with a scheduled waste disposal of more than 150 years. (authors)
The OECD Nuclear Energy Agency (NEA) has co-ordinated an international initiative to develop understanding and guidelines related to the long-term preservation of records, knowledge and memory (RK and M) for radioactive waste repositories. The initiative will come to a close in April 2018. Currently, a number of deliverables are in the process of publication and a preview and overview is presented in this paper. Central is the 'Final Report of the RK and M Initiative', which sets out the RK and M fundamentals, including basic principles of RK and M preservation, the concept of oversight and the relevant time frames, the mediated and non-mediated transmission of messages, and ultimately the need for a systemic strategy. Furthermore, it presents a menu of approaches and mechanisms of RK and M preservation, such as markers, time capsules, archives, the Key Information File (KIF), education, art, land use control, and monitoring. Finally, the main report provides suggestions on how to develop a systemic strategy. A bibliography and a regulatory catalogue on RK and M preservation, and concept reports describing the KIF and the Set of Essential Records (SER), will complement the set of deliverables of the RK and M Initiative. (authors)
Chlorite and sericite formed by the hydrothermal alteration of granite distribute predominantly around the geological repository in deep underground. These minerals often cover the surface of a solid phase and fill the fracture of granite considered as the natural barrier to the migration of radionuclides leaching from radioactive waste. Therefore, to assess the practical performance of the natural barrier, it is necessary to clarify the interaction between radionuclides and these minerals. This study examined the sorption of cationic radionuclides by chlorite and sericite through batch experiments, whereby Cs{sup +}, Sr{sup 2+}, and Eu{sup 3+} were used as tracer ions. In these experiments, powder-form chlorite or sericite was mixed with the solutions of the tracer ions to a liquid/solid ratio of 10 ml/g, and the resulting mixture was allowed to incubate for 2-7 days. The concentration of tracer ions was set to 1 mM and that of NaCl to a specific value in the 0-0.6 M range. The solution pH was 3, 5, or 8. As a result, tracer ions were significantly adsorbed by chlorite and sericite, regardless of pH or NaCl concentration, except when NaCl concentration reached the high value of 0.6 M. The distribution coefficient for europium ions at pH 5 was estimated to be 2-7 mL/g in chlorite and 10{sup 3}-10{sup 4} mL/g in sericite. These values significantly exceeded that measured for feldspar (2-4 mL/g), the predominant component of granite before it undergoes any hydrothermal alteration. These results suggest that cationic radionuclides will be immobilized through sorption in chlorite and sericite filling granite fractures, even if these thermal-fluid-formed minerals cover the surface of granite. (authors)
The High Flux Reactor (HFR) in Petten (NL) has been producing medical isotopes for several decades. Additionally, the HFR is used for many experiments including fuel/material tests. Over the years, Ion Exchange Resins (IER) that are used for the purification of the primary circuit and the basin have been replaced. Spent IER were accumulated and stored on site. Over time, the IER has become a historical waste issue that needs to be solved pragmatically as space to store them on site becomes scarce. This paper provides an overview of the characterization methodology needed to manage the Ion Exchange Resin wastes. (authors)
The EDF group companies within the Cyclife platform have for decades performed treatment and recycling of metals. With different approaches but all considered international Good Practice, as valuable materials are recovered for safe recycling and volumes in the repositories for radioactive waste are saved. For an efficient decommissioning project, a well-defined waste management process is one of the critical paths, not least when it comes to routes for clearance and recycling of materials. It is easy to underestimate the complexity and bottlenecks caused by shortage of logistic space. In order to mitigate these risks, activities such as strengthening categorization, quantification and adopting different routes based on the material properties should be implemented. By categorization of the of waste and materials considered/classified as contaminated or potentially contaminated it is obvious that the management of the metals is a key parameter in nuclear decommissioning. Analyses performed by the EDF companies shows that a majority of the materials, classified as contaminated, from a BWR/PWR plant are metals. Experience gives that a high percentage of these metals from decommissioning can be subject to recycling either directly upon completion of the clearance process or after certain treatment. Non-technical key parameters like the regulatory requirements on applying the waste hierarchy, the impact on repository programs as well as, not at least, the regulatory and public acceptance of recycling of materials from the nuclear industry are, together with costs essential factors when forming the routing of metals and other waste materials from a decommissioning project. Today the EDF group companies are positioned to provide a wide range of services for management of the contaminated metals from decommissioning projects, spanning from industrial management of metals which directly will be subject general clearance after verification measurements up to decontamination and melting of selected reactor internals for recycling to public domain or within the nuclear industry. In this paper the typical waste material composition for BWR and PWR plants, the different ways to treat/manage the radioactive and potentially radioactive metals including a comparison of the different approach commonly used in a technical, logistical and economical perspectives. A few success stories will be resented as well as lessons learned. (authors)
Progress toward nuclear waste disposal in the US has been badly corrupted. Since passing and amending the Nuclear Waste Policy Act, the US is further away from geologic disposal than it was in 1987, which was 30 years ago. The waste inventory, liability costs, and elements for dealing with the burgeoning problem continue to increase in complexity - largely because of inaction. The Nuclear Waste Policy Act, as amended, remains the national law in the US. Even if a repository at Yucca Mountain can be licensed, constructed, operated, and closed, the national nuclear waste imperative will not be solved by these actions. Our national challenge includes broad technical problems that are exacerbated by national procrastination, while other countries suffer similarly. This paper discusses several roadblocks that deny progress in our nuclear waste-disposal program, many of which are shared internationally. Recommendations for moving this seemingly overwhelming problem toward solutions are also included. (author)
Within the incremental development of the Cigeo deep geological repository, the Pilot Phase (PP) concept emerged during the 2013 public debate on Cigeo. The PP is a period of time that covers the beginning of the project, after its construction license is granted. It mainly aims at acquiring and / or confirming in situ, in a representative environment and in the operating conditions of Cigeo, the data selected for the design and safety demonstration. In parallel, it will emphasize the gradual and cautious approach for starting a complex industrial installation such as Cigeo. The Pilot Phase which is scheduled for a total duration of at least a decade will include 'inactive' tests (without radioactive waste) and then radioactive waste package disposal operations. The PP should be considered as a phase during which additional knowledge will be obtained and demonstration that cannot be fully acquired within the Underground Research Laboratory will be completed. (authors)
Projects designed to define, build, operate and monitor radioactive waste disposal solutions require the transmission of knowledge over several decades and the preservation of memory over several centuries. This is particularly acute for the geological disposal project 'Cigeo' led by the French national radioactive waste management agency (Andra) as far as the requirements in terms of reversibility lead to the choice of an incremental design that allows to integrate learning resulting from continuous improvement of knowledge. For instance, for robustness purposes, Cigeo is designed on the basis of currently proven technologies, but its step-by-step construction in successive stages must make it possible to integrate improvements derived from the scientific and technical progress as well as from experience feedback from its exploitation. In the field of industrial activity, a significant proportion of the knowledge and skills implemented by employees of a company are not known or even identified by the human resources organization or the mid-management staff. This is mainly due to the fact that (i) the organized knowledge-sharing is often based on documentary tools but little on social modalities and (ii) the organization of knowledge is mostly cross-cutting to the managerial lines. To overcome this bias, a global and integrated approach to knowledge management is currently the focus of Andra's specific efforts. Cross-disciplinary groups and close intergenerational links positioned throughout the life of the projects aim specifically at continuous and participative knowledge sharing, capitalization and transmission. Then, devices aiming at systematic dissemination of and access to knowledge support experience feedback and provide unified collaboration, traceability and decision-support at all scales. (authors)
Hanford has 149 underground single shell tanks; of which several have known or suspected leak sites. Sluicing with large volumes of solution in compromised leaking tanks is not desirable due to the risk of environmental release. To address the complex retrieval of hardpan nuclear waste in Hanford's single shell tanks, a Mechanical Waste Gathering System is being developed and tested, which breaks up the waste and moves it to the surfaces without the introduction of liquid to the tank bottom. To improve the removal of hardpan tank waste, WRPS has leveraged industry knowledge and previous experience to identify a solution. This technology will provide another option for the technology toolbox at Hanford. (authors)
Previous work towards studying repository loading have used: - spent nuclear fuel (SNF) with an average burnup composition; - a lumped capacitance thermal model for calculating temperature in a Cyclus repository model. The goal of this work is to improve on the repository models and use U.S. historical SNF inventory data in simulations to more accurately study the loading of a waste repository. These goals will be achieved by: - using UNF-ST-and-DARDS Unified Database (UDB) that has historic assembly-specific data (e.g, isotopic composition, heat) in Cyclus simulations; - implementing a more accurate thermal model within a Cyclus repository model. Objectives: - Create a Cyclus spent fuel conditioning model that packages spent fuel bundles into packages which have user-defined properties. - Create a Cyclus medium-fidelity repository model that gives accurate time and spatial dependent temperature values and loads the repository based on a user-selected loading strategy. Cyclus is an agent-based extensible framework for modeling flow of material through user-defined nuclear fuel cycles. In Cyclus, each facility in the fuel cycle is modeled individually and the facilities interact with one another as independent agents. The spent fuel conditioning model accepts spent fuel bundles and puts them into a cylindrical waste package. In the spent fuel conditioning model, the user can define variables: For each layer, radius, thermal conductivity, thermal diffusivity; For each package, Number of spent fuel bundles, Radius and height. The waste repository model accepts waste packages and emplaces them into available positions within the waste repository based on a thermal criteria. The thermal criteria is a temperature limit at the interface between the waste package surface and the host geology, that is set based on the repository's host geology. In the waste repository model, the user can define the variables: Capacity, Distance between waste packages, Distance between drifts, Repository host geology, Loading Strategy. After the addition of new waste packages at each time step, the waste repository model recalculates the temperature at each location in the repository. If the addition of this new package causes its temperature to exceed the thermal limit, it will be placed back into the buffer. A thermal model that relies on a transient 'outside' model and quasi-steady-state 'inside' model is used to accurately determine the temperature in the repository. The 'outside' model assumes a homogenous medium with the Engineered Barrier System (EBS) replaced by the geologic medium. Temperature solutions for the central waste package, adjacent point and line sources are superimposed to calculate the temperature at specific points in the repository. The central drift consists of one finite line source which represents the central waste package. The central drift also consists of point sources that represent neighboring waste packages in the central drift. The neighboring drifts are represented by infinite line sources. The 'inside' model is considered to be at a quasi-steady-state condition because EBS has a relatively low thermal mass compared to the infinite geologic medium. The steady state calculation is performed at each time step with the heat source and interface temperature as boundary conditions. Future Work: Run Cyclus simulations with U.S. historical SNF inventory data, the spent fuel conditioning and repository models to study how waste package acceptance strategies impact repository loading.
A pressing need for the Double-Shell Tank Integrity Program at Hanford is of the ability to inspect the bottom of the tanks. Though the DSTs' annulus spaces (the space between the internal and external tank walls) have been inspected visually since 1992 and with Ultrasonic Testing (UT) since 1996, inspections of the tank bottoms have been able to be conducted due to limitations of available technology, omitting about 40 percent of the tank surface below the maximum fill level from routine inspection. Visual inspections of the tank annulus have been conducted up to five times in some DSTs and portions of the annulus space for all of the DSTs has been inspected twice with UT. This region includes the walls of the primary tank and secondary liner along with accessible portions of the secondary liner bottom. Due to this lack of technology, the degradation of the primary tank bottom in Tank AY-102 was undetected until the tank leaked into its annulus space, confirmed in 2012. Since that time, WRPS has been working with the nondestructive examination community and the Pacific Northwest National Laboratory, to evaluate potential technologies to conduct these challenging remote inspections. Recent work has included the development, testing, and deployment of several remote visual inspection technologies to observe the condition of the primary tank bottom of the DSTs by leveraging air distribution slots in the refractory pad on which it rests. Robotic solutions to conduct this inspection were developed with a detailed understanding of the physical configuration and operational logistics. Understanding and subsequent communication of these details to vendors within the robotics and nondestructive examination community was a critical component to the successful production of these new tools. Throughout the FY16-FY18 years, vendors from nondestructive examination community were solicited for ideas to meet the tank bottom inspection challenge. Two tank bottom visual inspection solutions were then pursued to meet that challenge. Both tools were successfully deployed at Tank AP-107, and provided valuable visuals, never before obtained from the under tank environment of a double-shell tank. While there are minor opportunities for improvement identified with each system, general outcomes were overwhelmingly positive. Both systems were successfully able to navigate the refractory air slot pattern from the outer edge to the tank center and record video footage. The micro-crawler provided high quality and very stable footage through the air slot pattern, but took longer to deploy into the slots and traverse through them than the alternative system. The push-pull tethered camera was able to navigate all seven of its target air slots in a matter of a few hours, which included deployment, movement between slot entrances, and complete removal of the system from the annulus environment. Through these air slots, new information was gained about the tank bottom and refractory pad condition of tank AP-107, AP-106, AP-108, and AN-102. While some debris was noted in the air slots, including sand, chipped refractory, and construction materials, the refractory was found to be structurally stable and adequately supporting the primary tank bottom through the full diameter of the tank. Primary tank bottom steel exterior was found to be in good condition, free of ongoing or aggressive corrosion conditions. Looking toward the future, robotic access to and visual inspection of refractory air slots and the primary tank bottom steel has now proven viable. Incorporating periodic air slot inspections as a regular practice within the Double-Shell Tank Integrity Program is the next step, allowing trending of any changes in condition. As ultrasonic testing infrastructure was leveraged to complete the initial system deployments described in this report, it makes sense to adopt that same strategy for ongoing periodic examinations and deploy these primary tank bottom inspection tools alongside ultrasonic testing operations. Development of visual inspection tools to evaluate the primary tank bottom region of the double-shell tanks was planned as the first stage of inspection. Continued development of volumetric sensors and incorporation of these inspection tools into Hanford's ongoing Double-Shell Tank Integrity Program are the next steps, seeking to continuously expand understanding of asset integrity and remaining useful life. (authors)
The purpose of this Type A certification is to diversify the use of the RT-100 cask by allowing the end user to transport either Type A or Type B radioactive waste in accordance with the handling procedures for each waste category. The project's scope included the development of a matrix that contains all applicable requirements for a Type A package from the Code of Federal Regulations (CFR), Title 49 for the Department of Transportation (DOT) with a justification for each requirement. Moreover, the scope included the writing of conditions and restrictions list for the transportation of Type A nuclear waste, the writing of a compliance statement, and the design and fabrication of a Type A placard to be permanently placed on the RT-100 cask. Type A packages are self-certified by the end user using one of three methods as permitted by 49 CFR 173.461, either by performance of tests with prototypes or samples of the specimens representing the packaging, or reference to a previous satisfactory demonstration of compliance of a sufficiently similar nature, or calculations or reasoned evaluation using reliable and conservative procedures and parameters. Since the RT-100 cask was licensed by the Nuclear Regulatory Commission (NRC) as a Type B cask, Robatel relied on the method of reference to a previous satisfactory demonstration of compliance of a sufficiently similar nature for Type A certification. This method was determined to be acceptable, since Type B packages are evaluated for more demanding transport conditions than those required for Type A packages. This paper presents Robatel's process for certifying the RT-100 cask for Type A shipments, an overview of the DOT regulations related to Type A packages, and the documents that were generated for the end user. This paper is concluded with a discussion on the advantages of having the option to transport both Type A and Type B nuclear waste, and possible future projects to further improve the operation of the cask when making Type A shipments. (authors)