Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Reliability of Copper Inverse Opal Surfaces for Extreme-Heat-Flux Micro-Coolers in Low-Global-Warming-Potential Refrigerant R-1233zd Pool Boiling Experiments

This presentation provides a brief snapshot of the InterPACK paper InterPACK2023-113781. The paper explores copper inverse opal (CIO) surface reliability in pool boiling experiments in water and a new, low-global-warming-potential (GWP = 1) hydrofluoroolefin (HFO) refrigerant R-1233zd. The CIO-based structure is intended to develop enhanced two-phase heat transfer surfaces for extreme-heat-flux (approximately 1 kW/cm2) micro-coolers. In this study, a limited number of pool boiling experiments were performed using water and HFO-1233zd fluid, and the reliability of the CIO-based surfaces was evaluated. Critical heat flux (CHF) values in HFO-1233zd at 40 Degrees Celsius to 45 Degrees Celsius saturation temperatures and the corresponding saturation pressures were also measured. The CHF values with the refrigerant are significantly lower compared to those with water, but the refrigerant allows for a wider usable temperature range in the end application of the micro-coolers and is not limited to data centers with controlled ambient conditions. Reliability experiments with CIO surface samples - involving pool boiling with water on the CIO surfaces for approximately 48 hours and with HFO-1233zd for 144 hours - showed no structural degradation of the enhanced surface or any significant performance drop in heat transfer coefficients. The CIO surface samples in water were oxidized, most likely due to the presence of air in water and in the experimental vessel.

critical heat flux↗

Next-Generation Sequencing Data from a CUT&RUN Study of R. toruloides IFO0880 Cse4 and Orc1 Binding Sites

Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

Genome Engineering↗

R-matrix School 2025: Introduction to R-matrix Theory

This technical memo serves as a lecture material for the R-matrix school 2025 and distributed among the participants. The manuscript discusses in details the introduction to the R-matrix theory including its algorithm to calculate reaction cross sections and derivation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Saturn's nonaxisymmetric ring edges at 1.95 R(s) and 2.27 R(s)

The outer edges of Saturn's A and B rings, at 2.27 R(s) and 1.95 R(s), have been examined using data acquired by four Voyager experiments. The shapes and kinematics of these features are influenced by their proximity to strong low-order Lindblad resonances. The data for the A-ring edge are consistent with a seven-lobed radial distortion of amplitude 6.7 + or - 1.5 km which rotates with the mass-weighted mean angular velocity of the coorbital satellite system. The B-ring edge has essentially a double-lobed figure of radial amplitude 74 + or - 9 km which rotates with the mean motion of Mimas, though there is an indication that it is not completely described with a simple Saturn-centered ellipse. An upper limit of 10 m has been placed on the vertical thickness in the unperturbed region of the B ring.

Porco, C.↗

Evaluation of AK-225(R), Vertrel(R) MCA and HFE A 7100 as Alternative Solvents for Precision Cleaning and Verification Technology

The National Aeronautics and Space Administration (NASA), Kennedy Space Center (KSC) Materials Science Division conducted a study to evaluate alternative solvents for CFC-113 in precision cleaning and verification on typical samples that are used in the KSC environment. The effects of AK-225(R), Vertrel(R), MCA, and HFE A 7100 on selected metal and polymer materials were studied over 1, 7 and 30 day test times. This report addresses a study on the compatibility aspects of replacement solvents for materials in aerospace applications.

Orlando Melendez↗

Synthesis, structure, and electrochemical properties of [LNi(R f )(C 4 F 8 )] - and [LNi(R f ) 3 ] - complexes

The new anionic nickelate complexes [(MeCN)Ni(C 4 F 8 )(CF 3 )] -, [(MeCN)Ni(C 4 F 8 )(C 2 F 5 )] - , [(IMes)Ni(C 4 F 8 )(CF 3 )] - , [(IMes)Ni(CF 3 ) 3 ] - (IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), and [(F-NHC)Ni(Rf) 3 ] - (F-NHC = 1,3-bis(2,4-F2Ph), 2,4,6-F 3 Ph- or 3,4,5-F 3 Ph)imidazol-2-ylidene; (R f = CF 3 or C 2 F 5 ) were synthesized and structurally characterized. The electrochemical properties of all new compounds were revealed by cyclic voltammetry studies and compared to the known CF 3 analogue [(MeCN)Ni(CF 3 ) 3 ] -. The IMes-coordinated complexes exhibited initial oxidation events that were well-separated from a second oxidation process in the cyclic voltammograms. The complexes containing F-substituted NHC ligands [(F-NHC)Ni(CF 3 ) 3 ] - are structurally quite similar to the IMes derivative and reveal also two separated oxidation waves in their cyclic voltammograms. The absolute potentials as well as the separation between the two waves vary with the substitution pattern, suggesting that the NHC ligand environment (NHC = N-heterocyclic carbene) is an interesting platform for the development of new redox-triggered reactions that release trifluoromethyl and perfluoroalkyl radicals upon oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Composition measurements in the magnetotail between 60 R sub E and 240 R sub E

From January 1, 1983 to March 30, 1983 the ISEE-3 spacecraft was in the region of the magnetotail of the earth at distances from 60 to 240 R sub E. The ion composition instrument aboard ISEE-3 made ion composition and velocity measurements in two modes during this period. In the first mode the mass per charge (M/Q) range was 0.7 to 32 at velocities from 79 to 220 km per s. The M/Q range of the second mode was 1.4 to 6.0 at velocities from 300 to 620 km per s. Preliminary analysis of the data shows the magnetotail composition to have a significant solar wind-like component, with bulk velocities generally in the 300-600 km per s range.

Ogilvie, K. W.↗

Measurements of solar system dust at R < 1 AU and R > 3 AU

In Situ experiments on space craft yield information about dust parameters such as velocity, flux and size, and mass of particles. In Situ experiments as well as brightness measurements in the inner solar system have been made with Helios from .3 to 1 AU in the ecliptic plane which reveal two different dust populations with different bulk densities and relative velocities to the spacecraft. Zodiacal light measurements from Helios 1 and 2 reveal a radial brightness gradient proportional to R(exp -2.3). Measurements of dust particles in the outer solar system have been made onboard the Pioneer 10 and 11 spacecraft and for the high latitude region with Ulysses. Pioneer 10 and 11 also carried a spin-scan photopolarimeter that was used to map the zodiacal light and background starlight during the cruise to Jupiter in two broad bandpasses centered at .44 and .64 micron. Details of these measurements are briefly discussed.

Mann, Ingrid↗

Reanalysis of Fly's Eye GLM Simulator (FEGS) Optical Pulse Detections from the 2017 GOES-R Post Launch Test (GOES-R PLT) Field Campaign

In 2017, the GOES-R PLT field campaign was conducted to validate new instruments on board GOES-16, including the Geostationary Lightning Mapper (GLM). A NASA ER-2 high altitude aircraft was equipped with a sensor suite including FEGS and an electric field change meter (EFCM) for complementary observations of lightning. As part of a modern reanalysis, we plan to combine aircraft and ground observations from the lightning instrumentation and polarimetric Doppler radars for a more complete characterization of optical lightning measurements in the context of convective properties. This presentation focuses on our initial efforts which include a reanalysis of the FEGS multi-spectral optical waveforms using an updated pulse detection algorithm and a comparison of detected pulses with coincident EFCM and Lightning Mapping Array (LMA) data. We will present on characteristics of discharge processes including leaders, strokes, and continuing current signatures as observed by the suite of aircraft and ground-based lightning instrumentation.

T Daniel Walker↗

PERCEPTIVE: an R shiny $\underline{p}$ipelin$\underline{e}$ for the p$\underline{r}$edi$\underline{c}$tion of $\underline{ep}$igenetic modula$\underline{t}$ors $\underline{i}$n no$\underline{v}$el sp$\underline{e}$cies

Epigenetic processes are central to regulating gene expression, genome stability, and metabolic function across the tree of life; yet, their roles remain underexplored in microalgae, especially as new species continue to be identified and characterized. This is likely due to the cumbersome nature and species-dependent attributes of epigenetic wet-lab methodologies, which preclude the rapid identification of epigenetic modifications and modulators. However, there is high conservation of epigenetic processes from budding yeast to humans; in many cases, one may infer how behavior and function are epigenetically regulated in novel species by identifying epigenetic modulators, or the proteins responsible for conferring epigenetic modifications. Here, to this end, we have developed a graphical software package, titled PERCEPTIVE (pipeline for the prediction of epigenetic modulators in novel species). This platform solely uses the genomic sequence of an algal species, and preexisting information from other model organisms, to predict the epigenetic modulators and associated modifications in algae. Predictions are presented to the user in a graphical interface, which provides literature-based interpretation of results, enabling users to quickly understand potential epigenetic processes in their algal species of interest and plan follow-up experiments. To test PERCEPTIVE, we predicted epigenetic modulators in several feedstock candidate algae species. To validate these predictions, wet-lab studies were performed, including mass spectrometry; these results underscore the high accuracy of PERCEPTIVE predictions. Overall, PERCEPTIVE represents a powerful in silico tool for the research and manipulation of algal species, which does not require a priori knowledge of epigenetics and is accessible to a broad set of investigators.

59 BASIC BIOLOGICAL SCIENCES↗