Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Product”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

A new look at oxygen production on Mars - In situ propellant production (ISPP)

Consideration is given to the technique of producing oxygen on Mars from CO2 in the Martian atmosphere via in situ propellent production (ISPP). Mission implications of ISPP for both manned and unmanned Mars missions are described as well as ways to improve system reliability. Technology options that improve reliability and reduce power requirements include the use of adsorption pumps and advanced zirconia membranes. It is concluded that both manned and unmanned missions will benefit greatly from ISPP, especially in the context of a permanent manned base on Mars.

Frisbee, Robert H.↗
NASA NTRS2005

Atmospheric Correction of High-Spatial-Resolution Commercial Satellite Imagery Products Using MODIS Atmospheric Products

Remotely sensed ground reflectance is the foundation of any interoperability or change detection technique. Satellite intercomparisons and accurate vegetation indices, such as the Normalized Difference Vegetation Index (NDVI), require the generation of accurate reflectance maps (NDVI is used to describe or infer a wide variety of biophysical parameters and is defined in terms of near-infrared (NIR) and red band reflectances). Accurate reflectance-map generation from satellite imagery relies on the removal of solar and satellite geometry and of atmospheric effects and is generally referred to as atmospheric correction. Atmospheric correction of remotely sensed imagery to ground reflectance has been widely applied to a few systems only. The ability to obtain atmospherically corrected imagery and products from various satellites is essential to enable widescale use of remotely sensed, multitemporal imagery for a variety of applications. An atmospheric correction approach derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) that can be applied to high-spatial-resolution satellite imagery under many conditions was evaluated to demonstrate a reliable, effective reflectance map generation method. Additional information is included in the original extended abstract.

Pagnutti, Mary↗
NASA NTRS2005

Atmospheric Correction of High-Spatial-Resolution Commercial Satellite Imagery Products Using MODIS Atmospheric Products

Remotely sensed ground reflectance is the basis for many inter-sensor interoperability or change detection techniques. Satellite inter-comparisons and accurate vegetation indices such as the Normalized Difference Vegetation Index, which is used to describe or to imply a wide variety of biophysical parameters and is defined in terms of near-infrared and redband reflectance, require the generation of accurate reflectance maps. This generation relies upon the removal of solar illumination, satellite geometry, and atmospheric effects and is generally referred to as atmospheric correction. Atmospheric correction of remotely sensed imagery to ground reflectance, however, has been widely applied to only a few systems. In this study, we atmospherically corrected commercially available, high spatial resolution IKONOS and QuickBird imagery using several methods to determine the accuracy of the resulting reflectance maps. We used extensive ground measurement datasets for nine IKONOS and QuickBird scenes acquired over a two-year period to establish reflectance map accuracies. A correction approach using atmospheric products derived from Moderate Resolution Imaging Spectrometer data created excellent reflectance maps and demonstrated a reliable, effective method for reflectance map generation.

Pagnutti, Mary↗
NASA NTRS2001

Ancillary Radiometric Product (APR) usage in the EOS/MISR Level 1B radiance product generation

The radiometric response of the EOS-AM1 Multi-angle Imaging SpectroRadiometer (MISR) is to be measured throughout the six-year mission. This paper discusses the investigations and algorithm changes that have occurred in the production of the ARP since launch, and discusses changes to the Level 1B data that might be expected should data be reprocessed.

MISR ancillary radiometric ARP↗
NASA NTRS1983

Production and analysis of output data products for Landsat-4 in the engineering check-out phase

The Landsat-D (now Landsat-4) program was initiated by NASA in the mid-1970's. The spacecraft was launched on July 16, 1982. Instruments on the satellite include the fourth Multispectral Scanner (MSS) and the new higher-resolution Thematic Mapper (TM). In order to achieve the planned engineering and scientific objectives, attention has to be given to the validation of spacecraft and instrument performance, the adjustment of ground processing procedures, and the definition of the measures of the TU utility. To satisfy these requirements, a Landsat Assessment System (LAS) was conceived, and the Applications Developmental Data System (ADDS) was instituted. The set of component systems collectively became known as the 'Scrounge' system. The present investigation is concerned with the Scrounge system and the results of radiometric and geometric data evaluations. Attention is given to the TM geometric correction, TM data resampling, a radiometric correction functional description, and the results of the TM geometric and radiometric correction.

Lyon, J. C.↗
NASA NTRS1989

Design of a surface-based factory for the production of life support and technology support products. Phase 2: Integrated water system for a space colony

Phase 2 of a conceptual design of an integrated water treatment system to support a space colony is presented. This includes a breathable air manufacturing system, a means of drilling for underground water, and storage of water for future use. The system is to supply quality water for biological consumption, farming, residential and industrial use and the water source is assumed to be artesian or subsurface and on Mars. Design criteria and major assumptions are itemized. A general block diagram of the expected treatment system is provided. The design capacity of the system is discussed, including a summary of potential users and the level of treatment required; and, finally, various treatment technologies are described.

Source record↗
NASA NTRS1989

Lunar production of solar cells - A near-term product for a lunar industrial facility

Because of the much lower escape velocity, there is a great advantage in manufacture of solar cells for use in space on the moon rather than on earth. Silicon is abundant on the moon, and new refining methods allow it to be reduced and purified without extensive reliance on materials unavailable on the moon. Silicon and amorphous silicon solar cells could be manufactured on the moon for use in space.

Landis, Geoffrey A.↗
NASA NTRS1994

Space tourism: A flight of fantasy or the next major space product? Paper session 3: Products

In the euphoria of the early 1980's, a number of creative proposals for nontraditional uses of space were suggested. Taking tourists to space, possibly as early as the 1990's, was one such proposal. While it is now obvious that wherever explorers go, tourists (and hoteliers, restauranteurs, and tour guides) will someday follow. This paper discusses past and present efforts to promote space as a tourist destination.

Stone, Barbara A.↗
NASA NTRS2000

Production Strategies for Production-Quality Parts for Aerospace Applications

A combination of rapid prototyping processes (3D Systems' stereolithography and Sanders Prototyping's ModelMaker) are combined with gelcasting to produce high quality silicon nitride components that were performance tested under simulated use conditions. Two types of aerospace components were produced, a low-force rocket thruster and a simulated airfoil section. The rocket was tested in a test stand using varying mixtures of H2 and O2, whereas the simulated airfoil was tested by subjecting it to a 0.3 Mach jet-fuel burner flame. Both parts performed successfully, demonstrating the usefulness of the rapid prototyping in efforts to effect materials substitution. In addition, the simulated airfoil was used to explore the possibility of applying thermal/environmental barrier coatings and providing for internal cooling of ceramic parts. It is concluded that this strategy for processing offers the ceramic engineer all the flexibility normally associated with investment casting of superalloys.

Cawley, J. D.↗