Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

TRMM On-Orbit Performance Reassessed After Control Change

The Tropical Rainfall Measuring Mission (TRMM) spacecraft, a joint mission between the U.S. and Japan, launched onboard an H-I1 rocket on November 27, 1997, and transitioned in August, 2001, from an average operating altitude of 350 kilometers to 402.5 kilometers. Due to problems using the Earth Sensor Assembly (ESA) at the higher altitude, TRMM switched to a backup attitude control mode. Prior to the orbit boost TRMM controlled pitch and roll to the local vertical using ESA measurements while using gyro data to propagate yaw attitude between yaw updates from the Sun sensors. After the orbit boost, a Kalman filter used 3-axis gyro data with Sun sensor and magnetometers to estimate onboard attitude. While originally intended to meet a degraded attitude accuracy of 0.7 degrees, the new control mode met the original 0.2 degree attitude accuracy requirement after improving onboard ephemeris prediction and adjusting the magnetometer calibration onboard. Independent roll attitude checks using a science instrument, the Precipitation Radar (PR) which was built in Japan, provided a novel insight into the pointing performance. The PR data helped identify the pointing errors after the orbit boost, track the performance improvements, and show subtle effects from ephemeris errors and gyro bias errors. It also helped identify average bias trends throughout the mission. Roll errors tracked by the PR from sample orbits pre-boost and post-boost are shown in Figure 1. Prior to the orbit boost, the largest attitude errors were due to occasional interference in the ESA. These errors were sometime larger than 0.2 degrees in pitch and roll, but usually less, as estimated from a comprehensive review of the attitude excursions using gyro data. Sudden jumps in the onboard roll show up as spikes in the reported attitude since the control responds within tens of seconds to null the pointing error. The PR estimated roll tracks well with an estimate of the roll history propagated using gyro data. After the orbit boost, the attitude errors shown by the PR roll have a smooth sine-wave type signal because of the way that attitude errors propagate with the use of gyro data. Yaw errors couple at orbit period to roll with 1/4 orbit lag. By tracking the amplitude, phase, and bias of the sinusoidal PR roll error signal, it was shown that the average pitch rotation axis tends to be offset from orbit normal in a direction perpendicular to the Sun direction, as shown in Figure 2 for a 200 day period following the orbit boost. This is a result of the higher accuracy and stability of the Sun sensor measurements relative to the magnetometer measurements used in the Kalman filter. In November, 2001 a magnetometer calibration adjustment was uploaded which improved the pointing performance, keeping the roll and yaw amplitudes within about 0.1 degrees.

Bilanow, Stephen↗

A-Train Data Depot: Integrating and Visualizing Atmospheric Measurements Along the A-Train Tracks

The succession of US and international satellites that follow each other, seconds to minutes apart, across the local afternoon equator crossing is called the ATrain. The A-Train consists of the following satellites, in order of equator crossing: OCO, EOS Aqua, CloudSat, CALIPSO, PARASOL, and EOS Aura. Flying in such formation increases the number of observations, validates observations, and enables coordination between science observations, resulting in a more complete virtual science platform (Kelly, 2000) The goal of this project is to create the first ever A-Train virtual data portal/center, the A-Train Data Depot, to process, archive, access, visualize, analyze and correlate distributed atmosphere measurements from various A-Train instruments along A-Train tracks. The A-Train Data Depot (ATDD) will enable the free movement of remotely located A-Train data so that they are combined to create a consolidated vertical view of the Earth s Atmosphere along the A-Train tracks. Once the infrastructure of the ATDD is in place, it will be easily evolved to serve data from all A-Train data measurements: one stop shopping. The innovative approach of analyzing and visualizing atmospheric profiles along the platforms track (i.e., time) will be accommodated by reusing the GSFC Atmospheric Composition Data and Information Services Center (ACDISC) visualization and analysis tool, GIOVANNI, existing data reduction tools, on-line archwing for fast data access, and Cooperative Institute for Research in the Atmosphere (CRA) data co-registration tools. Initial measurements utilized include CALIPSO lidar backscatter, CloudSat radar reflectivity, clear air relative humidity, water vapor and temperature from AIRS, and cloud properties and aerosols from both MODIS. This will be followed by associated measurements from MLS, OMI, HIRDLS, and TES. Given the independent nature of instrument/platform development, the ATDD project has been met with many interesting challenges that, once resolved, will provide a much greater understanding of the relative flight dynamics and data co-registration of the suite of A-Train instruments, thus greatly increasing the accuracy of A-Train data analysis. Some of these challenges will be discussed. The project s resulting visualizations and analysis illustrate the importance of managing data so that measurements from various missions can be combined to enhance the understanding of the atmosphere. A-Train data management coordination, as performed here, is extremely significant in facilitating the A-Train science of clouds, precipitation, aerosol and chemistry.

Kempler, Steven↗

A-Train Data Depot: Integrating, Visualizing, and Extracting Cloudsat, CALIPSO, MODIS, and AIRS Atmospheric Measurements Along the A-Train Tracks

The succession of US and international Earth observing satellites that follow each other, seconds to minutes apart, across the local afternoon equator crossing is called the ATrain. The A-Train consists of the following satellites, in order of equator crossing: OCO, EOS Aqua, CloudSat, CALIPSO, PARASOL, and EOS Aura. Flying in such formation increases the number of observations, validates observations, and enables coordination between science observations, resulting in a more complete virtual science platform (Kelly, 2000). The goal of this project is to create the first ever A-Train virtual data portal/center, the A-Train Data Depot (ATDD), to process, archive, access, visualize, analyze and correlate distributed atmosphere measurements from various A-Train instruments along A-Train tracks. The ATDD will enable the free movement of remotely located A-Train data so that they are combined to create a consolidated vertical view of the Earth's Atmosphere along the A-Train tracks. Once the infrastructure of the ATDD is in place, it will be easily evolved to serve data from all A-Train data measurements: one stop shopping. The innovative approach of analyzing and visualizing atmospheric profiles along the platforms track (i.e., time) will be accommodated by reusing the GSFC Atmospheric Composition Data and Information Services Center (ACDISC) visualization and analysis tool, GIOVANNI, existing data reduction tools, on-line archiving for fast data access, access to remote data without unnecessary data transfers, and data retrieval by users finding data desirable for further study. Initial measurements utilized include CALIPSO lidar backscatter, CloudSat radar reflectivity, clear air relative humidity, water vapor and temperature from AIRS, and cloud properties and aerosols from both MODIS. This will be foilowed by associated measurements from TVILS, =MI, HIRDLS, sad TES. Given the independent nature of instrumentlplatform development, the ATDD project has been met with many interesting challenges that, once resolved, will provide a much greater understanding of the relative flight dynamics and data co-registration of the suite of A-Train instruments, thus greatly increasing the accuracy of A-Train data analysis. Some of these challenges will be illustrated and discussed. The project's early visualizations and analysis efforts illustrate the importance of managing data so that measurements from various missions can be combined to enhance the understanding of the atmosphere. A-Train data management coordination, as performed here, is extremely significant in facilitating the A-Train science of clouds, precipitation, aerosol and chemistry.

Kempler, Steven↗

Data Democratization: Challenges and Opportunities

Democratizing Earth data is one of the challenges many organizations around the world face in order to maximize the use of their Earth data for research, applications, education, and societal benefits. For example, at the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC), over 1600 global and regional datasets in several NASA Earth science focus areas, including atmospheric composition, water and energy cycles, and climate variability, are archived and distributed to the public. Giovanni, the Geospatial Interactive Online Visualization and Analysis Infrastructure, was developed by GES DISC to facilitate data access and exploration, especially for novice users of Earth science. With Giovanni, users can analyze and visualize over 2000 Earth science variables (e.g., precipitation, aerosol, surface wind) without downloading data, software, the expert understanding of data formats and structures, and coding skills, lowering the barrier to data analysis/comparison by preprocessing and accessing to the data. Results of data analysis and visualization can be accessed in several popular formats (e.g., NetCDF, CSV). As a result of Giovanni's efforts, more than 3000 referral papers have been published in various fields. In spite of this, Giovanni is still difficult to use for some users. For instance, if one searches for "precipitation," it will return over 150 related variables. The question is, which one to use? Furthermore, variables from different data providers (e.g., satellites and models) are named differently with different units, further confusing users, especially those outside the communities. Data democratization is complex and multifaceted. Challenges include service and data discovery, user experiences, visualization, data quality, trustworthiness, and more. In this presentation, we will examine Giovanni as an example of challenges and opportunities in developing data democratization services.

data democratization↗

The Next Generation of Spaceborne Radars for Cloud and Precipitation Measurements

NASA’s Earth Science Technology Office (ESTO) is currently developing advanced instrument concepts and technologies for the next generation of spaceborne atmospheric radars for clouds and precipitation measurements. Two representative examples are the Radar in a CubeSat (RainCube) – a miniaturized Ka-band precipitation intensity profiling radar for operation on a 6U CubeSat bus; and the Multi-Application Smallsat Tri-band Radar (MASTR) – a Ku/Ka/W band, electronic scanning, and Doppler atmospheric radar. These radar concepts will be capable of providing information on both the state and the process of the atmospheric water (as opposed to just the state information provided by existing spaceborne radars) to fill the current observational gaps in the advancement of weather and climate models.

Im, Eastwood↗

Global Precipitation Measurement (GPM) Mission Products and Services at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC)

On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data within the NASA Earth Observation System Data Information System (EOSDIS). The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). Over the past 16 years, the GES DISC has served the scientific as well as other communities with TRMM data and user-friendly services. During the GPM era, the GES DISC will continue to provide user-friendly data services and customer support to users around the world. GPM products currently and to-be available include the following:Level-1 GPM Microwave Imager (GMI) and partner radiometer productsLevel-2 Goddard Profiling Algorithm (GPROF) GMI and partner productsLevel-3 daily and monthly productsIntegrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final) A dedicated Web portal (including user guides, etc.) has been developed for GPM data (http:disc.sci.gsfc.nasa.govgpm). Data services that are currently and to-be available include Google-like Mirador (http:mirador.gsfc.nasa.gov) for data search and access; data access through various Web services (e.g., OPeNDAP, GDS, WMS, WCS); conversion into various formats (e.g., netCDF, HDF, KML (for Google Earth), ASCII); exploration, visualization, and statistical online analysis through Giovanni (http:giovanni.gsfc.nasa.gov); generation of value-added products; parameter and spatial subsetting; time aggregation; regridding; data version control and provenance; documentation; science support for proper data usage, FAQ, help desk; monitoring services (e.g. Current Conditions) for applications.

precipitation↗

Global Precipitation Measurement (GPM) Mission Products and Services at the NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC)

On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data within the NASA Earth Observation System Data Information System (EOSDIS). The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). Over the past 16 years, the GES DISC has served the scientific as well as other communities with TRMM data and user-friendly services. During the GPM era, the GES DISC will continue to provide user-friendly data services and customer support to users around the world. GPM products currently and to-be available include the following: 1. Level-1 GPM Microwave Imager (GMI) and partner radiometer products. 2. Goddard Profiling Algorithm (GPROF) GMI and partner products. 3. Integrated Multi-satellitE Retrievals for GPM (IMERG) products. (early, late, and final)A dedicated Web portal (including user guides, etc.) has been developed for GPM data (http:disc.sci.gsfc.nasa.govgpm). Data services that are currently and to-be available include Google-like Mirador (http:mirador.gsfc.nasa.gov) for data search and access; data access through various Web services (e.g., OPeNDAP, GDS, WMS, WCS); conversion into various formats (e.g., netCDF, HDF, KML (for Google Earth), ASCII); exploration, visualization, and statistical online analysis through Giovanni (http:giovanni.gsfc.nasa.gov); generation of value-added products; parameter and spatial subsetting; time aggregation; regridding; data version control and provenance; documentation; science support for proper data usage, FAQ, help desk; monitoring services (e.g. Current Conditions) for applications.In this presentation, we will present GPM data products and services with examples.

NASA GES DISC↗

CROCUS Tipping Bucket Rain Gauge Data from Argonne Deployable Mast Deployed at Argonne National Laboratory During Urban Flooding Campaign

The Tipping Bucket Rain Gauge (TBRG) dataset contains data from a non-heated Met One 12-inch tipping bucket rain gauge that was mounted on the Argonne Deployable Mast (ADM). The ADM is a rapid deployable meteorological trailer that can be outfitted with instrumentation to measure urban heat island effects, urban flooding or urban flux measurements. During the urban flooding field campaign, the ADM was outfitted with multiple precipitation measurement systems, including the TBRG. This dataset contains one minute measurements for precipitation accumulation during the ADM's deployment at the Argonne Testbed for Multiscale Observational Science (ATMOS) site. These data are helpful for identifying periods of precipitation, leading to potential flooding. TBRGs can be used to validate optical rain gauge data and disdrometer data collected during the CROCUS urban flooding campaign. Data were collected at ATMOS, a 20-acre prairie site at Argonne National Laboratory in Lemont, Illinois. The data is presented as daily NetCDF (.nc) files, each containing approximately 24 hours of observations. Files follow the naming convention of: the project (CROCUS), location (ADM-atmos), instrument name (tbrg), data level (raw, a1), and date (year, month, day). The NetCDF format can be accessed using common scientific software such as Python using xarray, netCDF4 or act-doe.

1-min Precipitation Accumulation↗

Post-fire time series of sensor and geochemistry sample data from surface water, groundwater, precipitation, soil, and vegetation across Oak Creek watershed, Washington

This dataset supports a broader study examining wildfire impacts on hydrologic connectivity across 5 sites within the Oak Creek watershed and the resulting biogeochemical impacts. Stream sites were selected using the Advanced Terrestrial Simulator (ATS) hydrologic model to identify locations with varying groundwater contributions and hydrologic responses across different burn severity scenarios. The Retreat Fire burned from July 23 to August 2 in 2024, affecting the five study sites at varying burn severities. Each site is equipped with YSI EXO2 sondes logging sub-hourly throughout the year, and grab samples are collected approximately every six weeks. YSI sondes are used to measure temporally resolved proxies for groundwater inputs (specific conductivity) and organic matter (fluorescent dissolved organic matter; fDOM) along with basic water quality and depth. Grab samples of surface water, groundwater, and precipitation are analyzed for water stable isotopes and conductivity to understand endmembers for hydrologic mixing Grab samples of surface water, groundwater, soil water, and litter/vegetation/soil leachates are analyzed for organic matter composition measured by Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry (FTICR-MS) to understand organic matter dynamics. Game camera photos are provided in a separate data package available at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/3018598. Future versions of this dataset will include time series data from YSI EXO2 sondes (fDOM, dissolved oxygen, temperature, depth, specific conductance, turbidity, pH), BaroTROLL sensors (air temperature and barometric pressure), rain gauges (precipitation), and data from the soil and vegetation samples. Because this study is ongoing, this data package will be updated regularly to include newly collected data and the additional data types. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. This dataset is comprised of (1) a folder of field photos; (2) a folder of surface water sample data; (3) a folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data; (4) a data checks report; (5) file-level metadata; (6) data dictionary; (7) field metadata; (8) readme; (9) international generic sample number (IGSN) mapping file; and (10) field protocols. The sample data subfolder contains (1) dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages; (2) total dissolved nitrogen data and averages; (3) stable water isotopes and averages; (4) methods codes; (5) FTICR-MS methods; and (15) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains the processed data and three subfolders, one containing the .xml files, one containing the water CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS). All files are .csv, .pdf, .R, .xml, .d, .html, .Rmd, .py, .cal, .json, .jpg, .jpeg, .png, .mov, or .mp4.

Biogeochemistry↗

Permafrost Thaw, Uneven Subsidence and Projected Drying of Ice-wedge Polygon Tundra: Modeling Archive

This dataset is a model archive of the paper Permafrost Thaw, Uneven Subsidence and Projected Drying of Ice-wedge Polygon Tundra (in prep) to support a modeling study investigating how projected increases in Arctic temperature and precipitation will jointly influence hydrologic conditions in ice-rich tundra landscapes. With this dataset, this study is to address the research question: Will Arctic tundra landscapes become wetter or drier with increasing precipitation and temperature in the future when thaw-induced ground subsidence and associated microtopographic evolution are represented? The simulations focus on ice-wedge polygon tundra, a widespread form of ice-rich permafrost terrain that is highly sensitive to thaw-driven landscape change. This dataset contains model input and output data for four study watersheds in Alaska: Anaktuvuk, Utqiagvik (formerly Barrow), Brooks Foothills, and Prudhoe Bay. Simulations were performed using the Advanced Terrestrial Simulator (ATS, v1.5), a physics-rich integrated surface–subsurface hydrologic model. For each watershed, ten modeling cases were performed representing two landscape evolution conditions (with subsidence and without subsidence) combined with five climate forcing scenarios derived from Shared Socioeconomic Pathways (SSP5, SSP5 with precipitation trend, SSP2, SSP2 with precipitation trend, and SSP2 with double precipitation trend). Particularly, for each watershed under the forcing SSP2 with precipitation trend, there are two additional simulations considering spatially heterogeneous subsidence distributions: one assumes randomly distributed scaling and the other includes elevation dependent distribution scaling. These simulations span 1980–2099 and include spin-up runs (1980–2009) followed by transient projections (2010–2099). To facilitate reproducibility of simulations, all datasets are organized by watershed. For each study watershed, the dataset contains: (1) Pre-partitioned mesh files for 32-core modeling (.par.32.XX), located in EACH_WATERSHED/mesh/basin; and also a non-partitioned mesh file (.exo) located in EACH_WATERSHED/mesh; (2) Climate forcings corresponding to the five SSP scenarios (.h5), located in EACH_WATERSHED/data; (3) Final states (.h5) from column spin-up modeling used to initialize historical watershed-scale spin-up runs from 1980 to 2009, located in EACH_WATERSHED/PreSpinupHistorical; (4) Final states (.h5) of historical watershed-scale spin-up runs from 1980 to 2009 used to initialize projection runs, located in EACH_WATERSHED/Spinup_daymetERA5; (5) ATS modeling input files (.xml), located in EACH_WATERSHED/EACH_SIMULATION_SCENARIO/inputfiles; (6) ATS modeling output files (.dat), located in in EACH_WATERSHED/EACH_SIMULATION_SCENARIO/combined_obs; (7) For the Brooks Foothills watershed, additional spatial model outputs are provided (.h5) for selected years (2033 and 2093) used to generate spatial figures in this study, located in Brooksfoothills/EACH_SIMULATION_SCENARIO/results-WITH/WITHOUT_SUBSIDENCE-year2033/2093. All data files with suffix .h5 can be accessible through Python h5py, and all data files with suffix of .dat can be imported by Python pandas. Mesh file with .exo can be visualized through Paraview or read by Python netCDF. The Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) project is a research effort to reduce uncertainty in the Department of Energy’s Energy Exascale Earth System Model (E3SM) by developing a predictive understanding of Arctic tundra ecosystems underlain by permafrost and to quantify feedbacks from the Arctic tundra to the Earth system. NGEE Arctic is supported by the Department of Energy's Office of Biological and Environmental Research. Over Phases 1–3, observations made by the NGEE Arctic team across a gradient of permafrost landscapes in Arctic Alaska improved the representation of tundra processes in the land surface component of E3SM (the E3SM Land Model, ELM). Model improvements emphasized unique aspects of permafrost environments and explored reductions in model complexity while retaining predictive power. The Arctic-informed ELM developed by NGEE Arctic has been used to make novel predictions on processes ranging from permafrost thaw to soil biogeochemical cycling to Earth system feedbacks associated with the unique characteristics of tundra plants. In Phase 4, the NGEE Arctic team is evaluating our new predictive understanding under novel conditions across the Arctic domain. In collaboration with partners at long-term pan-Arctic research sites we are examining whether an Arctic-informed ELM can faithfully simulate interactions among surface and subsurface processes at site, regional, and pan-Arctic scales. In turn, we are using variety of tools to dynamically extend and evaluate ELM inference, with an emphasis on data synthesis and pan-Arctic model evaluation, reintegration of code with an evolving E3SM, scaling across heterogeneous Arctic landscapes, and the appropriate representation of the impacts of increasingly frequent Arctic disturbances.

EARTH SCIENCE > ATMOSPHERE > PRECIPITATION↗

TRMM Science Highlights and 3-hr Quasi-global Precipitation Estimates

The Tropical Rainfall Measuring Mission (TRMM) has completed more than four years in orbit. A summary of research highlights will be presented focusing on application of TRMM data to topics ranging over climate analysis, improving forecasts, precipitation processes and non-precipitation applications. One focus of the talk will be the quasi-global TRMM real-time merged rainfall analysis with 3-hr resolution, which uses TRMM to calibrate estimates from other polar-orbit and geosynchronous satellites. These rainfall estimates provide useful information for applications for assimilation into numerical models and for hydrological studies. The status of precipitation estimates from different TRMM instruments and algorithms will be described. Monthly surface rainfall estimates over the ocean based on different instruments on TRMM currently differ by 20% in overall mean. In addition, time changes in global ocean rainfall between El Nino and La Nina conditions show differences between the active and passive microwave products. Improved versions of algorithms will shortly resolve most of these differences. The TRMM rainfall estimates are intercompared among themselves and with other estimates, including those of the standard, monthly Global Precipitation Climatology Project (GPCP) analysis. A four-year TRMM rainfall climatology is presented, including anomaly fields related to the changing ENSO situation during the mission. The evolution of precipitation analysis incorporating Advanced Microwave Scanning Radiometer (AMSR) data on AQUA and ADEOS II and eventually data from the Global Precipitation Mission (GPM) will also be described.

Adler, Robert F.↗

Heading for 20 Years of Quasi-Global Precipitation with the New Version 06 IMERG

The U.S. Global Precipitation Measurement mission (GPM) science team is developing a long-term dataset based on intercalibrated estimates from the international constellation of precipitation-relevant satellites and other data. The Integrated Multi-satellitE Retrievals for GPM (IMERG) merged precipitation product (IMERG) is computed at the half hour, 0.1° x 0.1° resolution globally in three "Runs"—Early, Late, and Final (4 hours, 14 hours, and 3.5 months after observation time, respectively). GPM is well into computing the new Version 06, which will be the first time IMERG covers the last two decades and routinely provides morphed estimates in polar regions where the surface is snow- and ice-free.A few salient features of the IMERG algorithm will be summarized, then representative examples of IMERG products will be shown. This starts with basic results, such as animations of maps, then extends to preliminary analyses of dataset characteristics. For example, the diurnal cycle demonstrates improvements over V05.

Huffman, George J.↗

Early Results for Version 06 IMERG

The U.S. Global Precipitation Measurement mission (GPM) science team is developing a long-term dataset based on intercalibrated estimates from the international constellation of precipitation-relevant satellites and other data. The Integrated Multi-satellitE Retrievals for GPM (IMERG) merged precipitation product (IMERG) is computed at the half hour, 0.1° x 0.1° resolution globally in three "Runs" Early, Late, and Final (4 hours, 14 hours, and 3.5 months after observation time, respectively). The longer latencies increase the available input data for the resulting estimates, most notably the use of monthly precipitation gauge analyses in the Final run. The Early and Late runs use a climatological gauge adjustment as a proxy for the monthly gauge analyses. At meeting time GPM should be well into computing the new Version 06, which will be the first time IMERG covers the last two decades and routinely provides morphed estimates in polar regions where the surface is snow- and ice-free. In this talk a few salient features of the IMERG algorithm will be summarized, then representative examples of IMERG products will be shown. This starts with basic results, such as animations of near-real-time maps, then extends to preliminary analyses of dataset characteristics. For example, the accumulations during Hurricane Harvey around Houston, Texas, USA, tended to be low, while accumulations along the Texas/Louisiana border to the northeast tended to be high. Furthermore, these opposite-sign differences occurred more or less simultaneously over much of the accumulation period. The working hypothesis is that there were systematic differences in the convective "regime" in the two places. The talk will end with a quick summary of the processing status and the future course of IMERG development.

Huffman, George J.↗

Developing Data Assimilated 4D Global Precipitation Products from the GEOS system in Support of the GPM Mission

This presentation is to report on the progresses made for the NASA Precipitation Measurement Mission (PMM) science team research tasks that are recently funded by NASA HQ. These tasks include (1) extending the existing GEOS all-sky analysis system to assimilate radiance data from other microwave sensors in GPM constellation satellites, (2) producing improved GEOS analyses of precipitation and downscaling of satellite precipitation estimates, and (3) providing the GEOS analyses to PMM Science team as prototype of GPM Level-4 products.

Kim, Min-Jeong↗

A Data System Architecture for Measurement Based Systems: Precipitation Processing System

NASA s Earth Science Enterprise (ESE) is changing focus from single satellite missions to measurement oriented programs. An example of this paradigm shift is the Global Precipitation Measurement (GPM) project. GPM is conceptualized as a rolling-wave of measurement possibilities all focused on the key precipitation parameter. In response to this shift to measurement programs and also integral to the ESE s new strategy for processing and management its data, a measurement based approach is also critical for data processing system that support measurement programs like GPM. This paper provides an overview of the paradigm shift from mission to measurement. It also presents a summary of the ESE s new strategy for its data systems. Building on this background the paper details the architectural, design and implementation aspects of the Precipitation Processing System (PPS). The PPS is an evolution of a single point system developed for the Tropical Rainfall Measurement Mission to a generic precipitation data system. The paper provides the context within which PPS will support the GPM program.

Stocker, Erich Franz↗

Sensitivity of the ACCP Value Framework Science Benefit Score

NASA’s priorities for Earth Science are informed by the 2017-2027 Decadal Survey for Earth Science and Applications from Space of the National Academies of Sciences, Engineering and Medicine. In that document, five Designated Observables are identified as priorities for implementation: Aerosols, Cloud-Convection-Precipitation, Surface Biology, Mass Change, and Surface Deformation Change. In 2019, NASA initiated four multi-year studies to formulate, assess, and recommend potential Observing System concepts that are responsive to the recommendations of the Earth Science Decadal Survey. The Aerosols, Clouds, Convection, and Precipitation (ACCP) study investigates opportunities for synergistic science resulting from implementations that combine both Aerosols science objectives and Clouds, Convection, and Precipitation science objectives. For the ACCP study, a Value Framework was designed to introduce structure, transparency, and traceability in the mission down-select decision process. This paper presents a sensitivity analysis that was conducted to characterize the behavior of the science benefit score of the ACCP Value Framework. it includes derivations of the sensitivity analysis equations, numerical analyses of the behavior of the combined benefit score, and the conclusions drawn from the results of the work that was conducted. The results of this analysis were key to ensuring that the aggregated science benefit scores would enable the team to differentiate and contrast across concepts.

John McLaughlan↗