Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase Prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Experimental Verification of the Theoretical Prediction of the Phase Structure of a Ni-Al-Ti-Cr-Cu Alloy

The Bozzolo-Ferrante-Smith (BFS) method for alloys was applied to the study of NiAl-based materials to assess the effect of alloying additions on structure. Ternary, quaternary and even pentalloys based on NiAl with additions of Ti, Cr and Cu were studied and experimental verification of the theoretical predictions including the phase structure of a Ni-Al-Ti-Cr-Cu alloy is presented. Two approaches were used, Monte Carlo simulations to determine low energy structures, and analytical calculations of the energy of high symmetry configurations which give physical insight into preferred structures. The energetics for site occupancy in ternary and quaternary systems were calculated leading to an indirect determination of solubility limits at 0 K. Precipitate formation with information concerning structure and lattice parameter were also 'observed' computationally and the general characteristics of a Ni-Al-Ti-Cr-Cu alloy were correctly predicted. The results indicate that the BFS method for alloys can be a useful tool for alloy design and can be used to complement experimental alloy design programs.

Wilson, A.↗
DOE OSTI2026

Multitask graph neural networks for elastoplastic response prediction in dual-phase polycrystals

Microstructure-sensitive prediction of elastoplastic response remains a recurring bottleneck in multiscale damage and fatigue modeling, where large ensembles of statistically distinct polycrystals are required to quantify variability and extreme-value behavior. In this work, we develop a multitask graph neural network (GNN) surrogate that maps dual-phase ferrite–martensite polycrystal microstructures to Statistical Volume Element (SVE)-level elastoplastic Quantities of Interest (QoIs). Each SVE is represented as a grain-adjacency graph, with node features encoding phase, geometry, and crystallographic orientation, and edge features encoding relative misorientation. A message-passing graph convolution generates node embeddings, which are pooled into a graph representation and passed to a multitask regression head that jointly predicts 10 scalar QoIs and vector-valued stress–strain responses in orthogonal loading directions across multiple martensite volume fractions and SVE sizes. Results show high accuracy for scalar QoIs and strong agreement for full stress–strain trajectories, with population envelopes reproducing both median behavior and finite-SVE variability across compositions and partition scales. A unified model trained on pooled volume-fraction data preserves most within-regime accuracy relative to regime-specific models while also capturing the broader cross-regime variation reflected in the pooled test set. Distributional comparisons further demonstrate that the surrogate preserves heterogeneity under SVE partitioning, enabling statistically consistent block-wise random-field construction for mesoscale analyses. Overall, the proposed grain-graph surrogate provides a practical pathway to accelerate ensemble-based studies of SVE-level constitutive variability in dual-phase polycrystals.

Crystal plasticity↗
DOE OSTI2025

Data-Driven Recommendation of Optimal Tuning Scheme for Range-Separated Hybrid Functionals in Solution-Phase UV/Vis Absorption Energy Prediction

Time-dependent density functional theory (TDDFT) combined with range-separated hybrid (RSH) functionals and a tuned range-separation parameter γ offers a computationally economical approach for high-throughput excited- state property predictions. The γ-tuning procedure in the gas phase is well established. However, no agreement on the best γ- tuning procedure has been made when considering the solvent effect with implicit solvent models like the polarizable continuum model (PCM). To answer that question, this study created a diverse dataset with 937 molecules with experimental solutionphase UV/vis absorption spectra. Three γ-tuning methods, the gasphase γ-tuning (GPγT), the partial vertical γ-tuning (PVγT), and the strict vertical γ-tuning (SVγT), were evaluated for the ωPBEh functional over the entire dataset. Additional benchmarks are done for the optimally tuned screened range-separated hybrid combined with the PCM approach (SRSH-PCM) and the solvation-mediated tuning procedure (sol-med-OT). Our findings revealed that the optimal γ-values obtained by the PVγT and the SVγT are significantly smaller than the GPγT. This trend holds consistently across all molecules in our dataset, and we explained the origin of this phenomenon. TDDFT calculations with PVγTand SVγT-tuned γ-values and default global Fock exchange fraction achieve superior performance compared to those using GPγTtuned or default γ and slightly outperform SRSH-PCM and sol-med-OT with similar or lesser computational cost. Furthermore, we found that the smaller γ-values from SVγT captured the expected 1/(εR) asymptotic behavior in the solution phase, resulting in accurate prediction of solution-phase CT excitations, consistent with the screened asymptote behavior encoded in SRSH-PCM. These results show that SVγT is the best scheme for high-throughput UV/vis absorption spectrum calculations using the ωPBEh functional from a data-driven perspective.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Predicting Liquid–Liquid Phase Separation of Submicrometer Proxies for Atmospheric Secondary Aerosol

Liquid–liquid phase separation (LLPS) of atmospheric aerosols can significantly impact climate, air quality, and human health. However, their complex composition, small size, and history-dependent properties result in great uncertainty in the modeling of aerosol phase state and atmospheric processes. Herein, using cryogenic transmission electron microscopy (cryo-TEM), we examined model submicron aerosols composed of organic compounds and ammonium sulfate, and established a parameterization for the separation relative humidity (SRH) that accounts for chemical composition, particle size, and equilibration time. We evaluated different variables that describe chemical composition: O/C ratio, partition coefficient, solubility, molar mass, and polarizability. The O/C ratio fits the SRH of micrometer droplets best, and by using a scaling factor to translate the micrometer SRH parameterization to submicron aerosols, we incorporate the effects of size and equilibration time. The measured scaling factor for the submicron mean SRH (30nm – 1μm, 20 min equilibration times) is 0.80, the factor becomes 1 with equilibration time over 1 hour, and is equal to 0, meaning that SRH is absent, when the aerosol dry diameter is smaller than 30 nm. Furthermore, our parameterization will aid in universal SRH modeling, potentially leading to more accurate predictions of aerosol mass, optical properties, hygroscopicity, and heterogeneous chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Symmetry breaking as predicted by a phase space Hamiltonian with a spin Coriolis potential

Here, we perform electronic structure calculations for a set of molecules with degenerate spin-dependent ground states ( 3 CH 2 , 2 CH$^{•}_{3}$, 3 O 2 ) going beyond the Born–Oppenheimer approximation and accounting for nuclear motion. According to a phase space approach that parameterizes electronic states (|Φ⟩) and electronic energies (E) by nuclear position and momentum [i.e., |Φ(R, P)⟩ and E(R, P)], we find that the presence of degenerate spin degrees of freedom leads to broken symmetry ground states. More precisely, rather than a single degenerate minimum at (R, P) = (R min , 0), the ground state energy has two minima at (R,P)=(R' min ,±P min ) (where R' min is close to R min ), dramatically contradicting the notion that the total energy of the system can be written in separable form as E = $\frac{P^2}{2M}$ + V el . Although we find that the broken symmetry solutions have small barriers between them for the small molecules, we hypothesize that the barriers should be macroscopically large for metallic solids, thus offering up a new phase-space potential energy surface for simulating the Einstein–de Haas effect.

Berry connection↗
NASA NTRS1989

NASA Lewis Stirling engine computer code evaluation

In support of the U.S. Department of Energy's Stirling Engine Highway Vehicle Systems program, the NASA Lewis Stirling engine performance code was evaluated by comparing code predictions without engine-specific calibration factors to GPU-3, P-40, and RE-1000 Stirling engine test data. The error in predicting power output was -11 percent for the P-40 and 12 percent for the Re-1000 at design conditions and 16 percent for the GPU-3 at near-design conditions (2000 rpm engine speed versus 3000 rpm at design). The efficiency and heat input predictions showed better agreement with engine test data than did the power predictions. Concerning all data points, the error in predicting the GPU-3 brake power was significantly larger than for the other engines and was mainly a result of inaccuracy in predicting the pressure phase angle. Analysis into this pressure phase angle prediction error suggested that improvements to the cylinder hysteresis loss model could have a significant effect on overall Stirling engine performance predictions.

Sullivan, Timothy J.↗
DOE OSTI2026

Plutonium migration and phase evolution in irradiated U-Pu-Zr metallic fuels: An integrated EPMA-SEM-TEM study

Constituent redistribution is a defining feature of irradiated U-Pu-Zr metallic fuels, yet its mechanisms and effects on fuel performance are not sufficiently resolved to guide model development. Although decades of irradiation testing have established broad trends, a true mechanistic understanding of constituent redistribution has not been achieved. Here, in this study, we use electron probe microanalysis (EPMA), scanning electron microscopy (SEM), and transmission electron microscopy-based (TEM) selective area electron diffraction (SAED) on a EBR-II irradiated U-19 wt.% Pu-6 wt.% Zr fuel pin cross-section to correlate the composition, porosity, and crystallographic phases formed after irradiation. Constituent redistribution is thought to consist of three distinct zones, in which uranium and zirconium migrate while plutonium remains relatively unchanged. Our EPMA results resolve eight distinct compositional regions, and more importantly, show that plutonium redistributes alongside zirconium, contrary to historical assumptions. The distribution of fission products was highly asymmetric with a few large lanthanide precipitates observed at isolated sites on the pin periphery instead of a uniform distribution of smaller precipitates around the periphery. Using thermodynamic data from TAF-ID and the measured EPMA compositions, matrix phase fractions were predicted across the fuel radius. Phase predictions based on composition did not match TEM/SAED results, which revealed a much higher fraction of α−U phase than would be expected if phases were retained from reactor temperatures. These findings highlight the need for expanded SAED phase identification to capture post-irradiation and storage effects, as well as rigorous uncertainty quantification in fuel performance and phase diagram modeling to better constrain predictions from compositional data.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2016

Ab Initio Simulations of Temperature Dependent Phase Stability and Martensitic Transitions in NiTi

For NiTi based alloys, the shape memory effect is governed by a transition from a low-temperature martensite phase to a high-temperature austenite phase. Despite considerable experimental and computational work, basic questions regarding the stability of the phases and the martensitic phase transition remain unclear even for the simple case of binary, equiatomic NiTi. We perform ab initio molecular dynamics simulations to describe the temperature-dependent behavior of NiTi and resolve several of these outstanding issues. Structural correlation functions and finite temperature phonon spectra are evaluated to determine phase stability. In particular, we show that finite temperature, entropic effects stabilize the experimentally observed martensite (B19') and austenite (B2) phases while destabilizing the theoretically predicted (B33) phase. Free energy computations based on ab initio thermodynamic integration confirm these results and permit estimates of the transition temperature between the phases. In addition to the martensitic phase transition, we predict a new transition between the B33 and B19' phases. The role of defects in suppressing these phase transformations is discussed.

nickel titanium↗
NASA NTRS2016

Ab Initio Simulations of Phase Stability and Martensitic Transitions in NiTi

For NiTi based alloys, the shape memory effect is governed by a transition from a low-temperature martensite phase to a high-temperature austenite phase. Despite considerable experimental and computational work, basic questions regarding the stability of the phases and the martensitic phase transition remain unclear even for the simple case of binary, equiatomic NiTi. We perform ab initio molecular dynamics simulations to describe the temperature-dependent behavior of NiTi and resolve several of these outstanding issues. Structural correlation functions and finite temperature phonon spectra are evaluated to determine phase stability. We show that finite temperature, entropic effects stabilize the experimentally observed martensite (B19') and austenite (B2) phases while destabilizing the theoretically predicted (B33) phase. Free energy computations based on ab initio thermodynamic integration confirm these results and permit estimates of the transition temperature between the phases. In addition to the martensitic phase transition, we predict a new transition between the B33 and B19' phases. The role of defects in suppressing phase transformation temperatures is discussed.

Simulations↗
NASA NTRS1973

Investigation into the propagation of Omega very low frequency signals and techniques for improvement of navigation accuracy including differential and composite omega

An analysis of Very Low Frequency propagation in the atmosphere in the 10-14 kHz range leads to a discussion of some of the more significant causes of phase perturbation. The method of generating sky-wave corrections to predict the Omega phase is discussed. Composite Omega is considered as a means of lane identification and of reducing Omega navigation error. A simple technique for generating trapezoidal model (T-model) phase prediction is presented and compared with the Navy predictions and actual phase measurements. The T-model prediction analysis illustrates the ability to account for the major phase shift created by the diurnal effects on the lower ionosphere. An analysis of the Navy sky-wave correction table is used to provide information about spatial and temporal correlation of phase correction relative to the differential mode of operation.

Source record↗
NASA NTRS1988

A prediction for the maximum phase and duration of sunspot cycle 22

A projected value of the maximum amplitude of sunspot cycle 22 is used to predict the ascent, maximum phase, and length of the cycle. It is suggested that cycle 22 will have a lower maximum amplitude than cycle 21. This would make cycle 22 a 'negative-valued' maximum amplitude first-difference cycle with an ascent with a median value of 4 years. Cycle 22 is predicted to be a long-period cycle with a length in the range of 138 + or - 8 months. It is concluded that cycle 22 will probably peak sometime in the latter half of 1990 or the first half of 1991 and that it will not end until early to mid 1998.

Wilson, Robert M.↗
DOE OSTI2025

Interplay between electron localization, magnetic order, and Jahn-Teller distortion dictates LiMnO2 phase stability

The development of manganese (Mn)-rich cathodes for Li-ion batteries promises to alleviate potential supply chain bottlenecks in battery manufacturing. Fundamental challenges in Mn-rich cathodes arise from phenomena such as structural changes due to cooperative Jahn-Teller (JT) distortions of in octahedral environments, Mn migration, and phase transformations to spinel-like order, all of which affect the electrochemical performance. These physically complex phenomena motivate an re-examination of the Li-Mn-O rock-salt space, with a focus on the thermodynamics of the prototypical, polymorphs. It is found that the generalized gradient approximation (GGA-PBEsol) and meta-GGA ( ) density functionals with empirically fitted on-site Hubbard corrections yield spurious stable phases for , such as predicting a phase with -like order ( ) to be the ground state instead of the orthorhombic (Pmmn) phase, which is the experimentally known ground state. Accounting for antiferromagnetic order in each structure is shown to have a substantial effect on the total energies and resulting phase stability. By using hybrid-GGA (HSE06) and GGA with self-consistent Hubbard parameters (on-site and inter-site ) calculated from linear response theory, the experimentally observed phase stability trends are recovered. The calculated on-site between Mn- states in the experimentally observed orthorhombic, layered, and spinel phases are significantly smaller than in and disordered layered structures, by within GGA. The smaller values of are shown to be correlated with a collinear ordering of JT distortions, in which all orbitals are oriented in the same direction. This cooperative JT effect can lead to greater electron delocalization from Mn along the states due to increased Mn-O covalency, which contributes to the greater electronic stability compared to the phases with noncollinear JT arrangements. The structures with collinear ordering of JT distortions also generate greater vibrational entropy, which helps stabilize these phases at high temperature. These phases are shown to be strongly insulating with large calculated band gaps , which are computed using HSE06 and .

Kam, Ronald L↗
NASA NTRS1985

Source phase shift - A new phenomenon in wave propagation due to anelasticity

The free oscillations of an anelastic earth model due to earthquakes were calculated directly by means of the correspondence principle from wave propagation theory. The formulation made it possible to find the source phase which is not predictable using first order perturbation theory. The predicted source phase was largest for toroidal modes with source components proportional to the radial strain scalar instead of the radial displacement scalar. The source phase increased in relation to the overtone number. In addition, large relative differences were found in the excitation modulus and the phase when the elastic excitation was small. The effect was sufficient to bias estimates of source properties and elastic structure.

Buland, R.↗
NASA NTRS1994

Analysis of phase distribution phenomena in microgravity environments

The purpose of the research presented in this paper is to demonstrate the ability of multidimensional two-fluid models for bubbly two-phase flow to accurately predict lateral phase distribution phenomena in microgravity environments. If successful, this research should provide NASA with mechanistically-based analytical methods which can be used for multiphase space system design and evaluation, and should be the basis for future shuttle experiments for model verification.

Lahey, Richard T., Jr.↗
NASA NTRS1994

Analysis of phase distribution phenomena in microgravity environments

In the past one of NASA's primary emphasis has been on identifying single and multiphase flow experiments which can produce new discoveries that are not possible except in a microgravity environment. While such experiments are obviously of great scientific interest, they do not necessarily provide NASA with the ability to use multiphase processes for power production and/or utilization in space. The purpose of the research presented in this paper is to demonstrate the ability of multidimensional two-fluid models for bubbly two-phase flow to accurately predict lateral phase distribution phenomena in microgravity environments. If successful, this research should provide NASA with mechanistically-based analytical methods which can be used for multiphase space design and evaluation, and should be the basis for future shuttle experiments for model verification.

Lahey, Richard, Jr.↗