Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROXIMITY EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Proximity Effects of Superconductivity and Antiferromagnetism in a Nanowire

In this paper, we theoretically study the proximity effects of s-wave superconductivity(SC) and antiferromagnetism(AFM) in a nanowire. For the half-filling case, it was found that the Andreev bound states form near the boundary between the AFM and the SC which are accompanied by the strongly localized p-wave pairing. These in-gap states remain when the system is slightly doped. For the electron or hole doped system, they merge into the upper or the lower antiferromagnetic bands gradually with the increase of doping, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling T c of Iridium films using interfacial proximity effects

High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable T c , depending on the application. To advance high-precision macrocalorimetry, we require low-T c films that are easy to fabricate. A simple and effective way to suppress T c of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt bilayers as well as Au/Ir/Au trilayers. While Ir/Au films fabricated by applying heat to the substrate during Ir deposition have been used in the past for superconducting sensors, we present results of T c suppression on Iridium by deposition at room temperature in Au/Ir/Au trilayers and Ir/Pt bilayers in the range of $\sim$20-100~mK. Measurements of the relative impedance between the Ir/Pt bilayers and Au/Ir/Au trilayers fabricated show factor of $\sim$10 higher values in the Ir/Pt case. These new films could play a key role in the development of scalable superconducting transition edge sensors that require low-T c films to minimize heat capacity and maximize energy resolution, while keeping high-yield fabrication methods.

Hennings-Yeomans, R↗

DC responsivity of proximity effect bridges to high frequency radiation

The effect of microwave radiation on the dc current-voltage characteristic of proximity effect bridges has been studied at frequencies of 10, 35, and 90 GHz. The properties of bridges fabricated in layered films of Nb and Ta are reported. The fraction, epsilon, of the incident radiant power absorbed by the bridge is measured calorimetrically, permitting determination of the intrinsic responsivity (volts per watt of power absorbed when operated in a current-biased mode). In the test geometry employed, epsilon is typically about .0001 for a 0.1 ohm Nb-Ta bridge, and increases roughly linearly with dc junction resistance. Broad-band responsivity is generally independent of incident power, increases with increasing critical current (decreasing temperature), and decreases with increasing frequency. Peak responsivities achieved to date are about 100,000 V/W (absorbed) at 10 GHz and about 100 V/W (absorbed) at 90 GHz.

Hauser, M. G.↗

Proximity Effect of Magnesium Diboride on Single-Walled Carbon Nanotube: an Ab Initio Study

Magnesium diboride (MgB{sub 2}) superconductor with excellent physical properties continues to attract the attention of researchers since its discovery. It derives its versatility from the absence of weak links, large coherence length, and small anisotropy. On the other hand, reports of superconductivity in small-diameter single-walled carbon nanotubes (SWCNTs) suspended between superconducting contacts and proximity induced supercurrents in Ta/SWNTs/Au junctions have also aroused great interest in the scientific community. Proximity induced superconductivity in SWCNTs has opened up new frontiers of research which will lead to many novel discoveries. This paper reports ab initio investigations on the proximity effect of MgB{sub 2} on the electronic structure of a SWCNT. Condensation of electronic states is observed in the electronic band structure of the pristine SWCNT when MgB{sub 2} is held in proximity. An additional band gap is generated below the lowest energy state of the valence band of the pristine CNT which we suggest, is due to Cooper pair formation. This leads to the prediction that SWCNTs will show superconducting properties in proximity of MgB{sub 2}. We envision MgB{sub 2}-coated SWCNTs as a novel nanomaterial that has a combination of proximity induced superconductivity and inherently unique mechanical and optical properties of SWCNTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic proximity effect at the interface between a cuprate superconductor and an oxide spin valve

A heterostructure that consists of the YBa{sub 2}Cu{sub 3}O{sub 7–δ} cuprate superconductor and the SrRuO{sub 3}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} ruthenate/manganite spin valve is investigated using SQUID magnetometry, ferromagnetic resonance, and neutron reflectometry. It is shown that a magnetic moment is induced due to the magnetic proximity effect in the superconducting part of the heterostructure, while the magnetic moment in the composite ferromagnetic interlayer is suppressed. The magnetization emerging in the superconductor coincides in order of magnitude with the results of calculations taking into account the induced magnetic moment of Cu atoms because of orbital reconstruction at the interface between the superconductor and the ferromagnet, as well as with the results of the model taking into account the variations in the density of states at a distance on the order of the coherence length in the superconductor. The experimentally obtained characteristic penetration depth of the magnetic moment in the superconductor considerably exceeds the coherence length of the cuprate superconductor, which indicates the predominance of the mechanism of induced magnetic moment of Cu atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoparticle shape evolution and proximity effects during tip-induced electrochemical processes

The voltage spectroscopies in scanning probe microscopy (SPM) techniques are widely used to investigate the electrochemical processes in nanoscale volumes, which are important for current key applications, such as batteries, fuel cells, catalysts, and memristors. The spectroscopic measurements are commonly performed on a grid of multiple points to yield spatially resolved maps of reversible and irreversible electrochemical functionalities. Hence, the spacing between measurement points is an important parameter to be considered, especially for irreversible electrochemical processes. Here, we report nonlocal electrochemical dynamics in chains of Ag particles fabricated by the SPM tip on a silver ion solid electrolyte. When the grid spacing is small compared with the size of the formed Ag particles, anomalous chains of unequally sized particles with double periodicity evolve. This behavior is ascribed to a proximity effect during the tip-induced electrochemical process, specifically, size-dependent silver particle growth following the contact between the particles. In addition, fractal shape evolution of the formed Ag structures indicates that the growth-limiting process changes from Ag + /Ag redox reaction to Ag + -ion diffusion with the increase in the applied voltage and pulse duration. Our study shows that characteristic shapes of the electrochemical products are good indicators for determining the underlying growth-limiting process, and emergence of complex phenomena during spectroscopic mapping of electrochemical functionalities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Termination switching of antiferromagnetic proximity effect in topological insulator

This work reports the ferromagnetism of topological insulator, (Bi,Sb) 2 Te 3 (BST), with a Curie temperature of approximately 120 K induced by magnetic proximity effect (MPE) of an antiferromagnetic CrSe. The MPE was shown to be highly dependent on the stacking order of the heterostructure, as well as the interface symmetry: Growing CrSe on top of BST results in induced ferromagnetism, while growing BST on CrSe yielded no evidence of an MPE. Cr-termination in the former case leads to double-exchange interactions between Cr 3+ surface states and Cr 2+ bulk states. This Cr 3+ -Cr 2+ exchange stabilizes the ferromagnetic order localized at the interface and magnetically polarizes the BST Sb band. In contrast, Se-termination at the CrSe/BST interface yields no detectable MPE. These results directly confirm the MPE in BST films and provide critical insights into the sensitivity of the surface state.

42 ENGINEERING↗

Using Magnetic Proximity Effects to Build Designer Quantum Materials [Slides]

The properties of naturally occurring materials are not necessarily commensurate with those needed for next-generation devices. Counter to conventional thought, we find magnetic proximity effects can be asymmetric. In fact, our experimental data and DFT calculations indicate this effect is universal, with material and heterostructure specificity being vital for predictive modeling. This work suggests routes towards rational design of device component materials via selective control over spin valley states.

36 MATERIALS SCIENCE↗

Tuning the vertical location of helical surface states in topological insulator heterostructures via dual-proximity effects

In integrating topological insulators (TIs) with conventional materials, one crucial issue is how the topological surface states (TSS) will behave in such heterostructures. We use first-principles approaches to establish accurate tunability of the vertical location of the TSS via intriguing dual-proximity effects. By depositing a conventional insulator (CI) overlayer onto a TI substrate (Bi 2 Se 3 or Bi 2 Te 3 ), we demonstrate that, the TSS can float to the top of the CI film, or stay put at the CI/TI interface, or be pushed down deeper into the otherwise structurally homogeneous TI substrate. These contrasting behaviors imply a rich variety of possible quantum phase transitions in the hybrid systems, dictated by key material-specific properties of the CI. These discoveries lay the foundation for accurate manipulation of the real space properties of TSS in TI heterostructures of diverse technological significance.

36 MATERIALS SCIENCE↗

Hubble space telescope/cosmic origins spectrograph observations of the quasar Q0302–003: Probing the He II reionization epoch and QSO proximity effects

Q0302–003 (z = 3.2860 ± 0.0005) was the first quasar discovered that showed a He II Gunn-Peterson trough, a sign of incomplete helium reionization at z ≳ 2.9. We present its Hubble Space Telescope/Cosmic Origins Spectrograph far-UV medium-resolution spectrum, which resolves many spectral features for the first time, allowing study of the quasar itself, the intergalactic medium, and quasar proximity effects. Q0302–003 has a harder intrinsic extreme-UV spectral index than previously claimed, as determined from both a direct fit to the spectrum (yielding α{sub ν} ≈ –0.8) and the helium-to-hydrogen ion ratio in the quasar's line-of-sight proximity zone. Intergalactic absorption along this sightline shows that the helium Gunn-Peterson trough is largely black in the range 2.87 < z < 3.20, apart from ionization due to local sources, indicating that helium reionization has not completed at these redshifts. However, we tentatively report a detection of nonzero flux in the high-redshift trough when looking at low-density regions, but zero flux in higher-density regions. This constrains the He II fraction to be about 1% in the low-density intergalactic medium (IGM) and possibly a factor of a few higher in the IGM as a whole, suggesting helium reionization has progressed substantially by z ∼ 3.1. The Gunn-Peterson trough recovers to a He II Lyα forest at z < 2.87. We confirm a transmission feature due to the ionization zone around a z = 3.05 quasar just off the sightline, and resolve the feature for the first time. We discover a similar such feature possibly caused by a luminous z = 3.23 quasar further from the sightline, which suggests that this quasar has been luminous for >34 Myr.

79 ASTRONOMY AND ASTROPHYSICS↗

Two-fluid theory of composite bosons and fermions and the quantum Hall proximity effect

Here we propose a two-fluid description of fractional quantum Hall systems, in which one component is a condensate of composite bosons and the other a Fermi liquid formed by composite fermions (or simply electrons). We employ the theory to model the interface between a fractional quantum Hall liquid and a (composite) Fermi liquid metal, where we find a penetration of quantum Hall condensate into the metallic region reminiscent of the proximity effect in superconductor-metal interfaces. We also find a novel and physically reasonable set of gapped quasielectron and neutral modes in fractional quantum Hall liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The quasar proximity effect in an equivalent-width-limited sample of the Lyman-alpha forest

We have obtained a simple analytical approximation to the relationship between a rest-frame equivalent-width distribution for Ly-alpha forest absorption lines, N(W), and an H I column density distribution of the observed cloud number, N(N). Assuming a simple power-law form for N(N) proportional to N exp (1-beta), it is shown that beta = 1.4 turns out to agree fairly well with the observed form of N(W) in a broad range of column densities. We present a theoretical analysis of how the 'proximity effect' influences a W-limited sample of Ly-alpha forest lines. It is shown that this influence is considerably smaller than has been found before for a N-limited sample, for which an approximate value of beta was assumed rather than derived as has been done, for a W-limited sample, in the present paper. As a result, available observational data appear to be still consistent with the conjecture that the observed population of QSOs is the major source of the UV background at redshifts z about 2-4.

Chernomordik, Viktor V.↗

Quasar ionization of Lyman-alpha clouds - The proximity effect, a probe of the ultraviolet background at high redshift

The distribution of lines in the Ly-alpha forests in quasar spectra is examined using spectral data from 19 quasars with emission lines redshifts z sub Q ranging from 1.7 to 3.8. The number density of Ly-alpha lines generally increases with resdhift z, but there exists a countervailing trend of diminishing number density within individual quasar spectra as z tends to z sub Q. Evidence is presented that this countervailing trend is due to enhanced ionization of Ly-alpha clouds by the bright nearby quasars in whose spectra they are observed. It is suggested that this proximity effect should be used as a powerful tool to measure locally the ionizing flux emitted by high-redshift objects.

Bajtlik, Stanislaw↗

Surface magnetism and proximity effects in hexaboride thin films

Here, the unexpected ferromagnetism in alkaline hexaborides has attracted extensive research efforts. The exceptionally high Curie temperature sustained by very low density of magnetic moments is yet to be clearly understood. Here, we report the magnetic properties studied in CaB 6 and SrB 6 thin films and their heterostructures with SmB 6 grown by pulsed laser deposition. A coexistence of ferromagnetic and superparamagnetic orders with 2D-type magnetic anisotropy was observed in CaB 6 and SrB 6 . Boron deficiency and closely correlated local oxidization were found at the film surface that contacts air and its interface with the oxide substrate. These results suggest that the magnetism observed is likely generated by two thin surface/interface layers with high concentration of boron vacancies which are energetically stabled by oxygen cation. Additionally, clear suppression of the superconductivity proximity effect in SmB 6 film was observed when SmB 6 was grown on top of the magnetic CaB 6 . Such results demonstrate the interesting perspective of engineering multifunctional heterostructures by coupling the surface magnetic layer with the diversity of other hexaboride materials.

36 MATERIALS SCIENCE↗

Large-mutation spectra induced at hemizygous loci by low-LET radiation: evidence for intrachromosomal proximity effects

A mathematical model is used to analyze mutant spectra for large mutations induced by low-LET radiation. The model equations are based mainly on two-break misrejoining that leads to deletions or translocations. It is assumed, as a working hypothesis, that the initial damage induced by low-LET radiation is located randomly in the genome. Specifically, we analyzed data for two hemizygous loci: CD59- mutants, mainly very large-scale deletions (>3 Mbp), in human-hamster hybrid cells, and data from the literature on those HPRT- mutants which involve at least deletion of the whole gene, and often of additional flanking markers (approximately 50-kbp to approximately 4.4-Mbp deletions). For five data sets, we estimated f, the probability that two given breaks on the same chromosome will misrejoin to make a deletion, as a function of the separation between the breaks. We found that f is larger for nearby breaks than for breaks that are more widely separated; i.e., there is a "proximity effect". For acute irradiation, the values of f determined from the data are consistent with the corresponding break misrejoining parameters found previously in quantitative modeling of chromosome aberrations. The value of f was somewhat smaller for protracted irradiation than for acute irradiation at a given total dose; i.e., the mutation data show a decrease that was smaller than expected for dose protraction by fractionation or low dose rate.

Non-NASA Center↗

Probing Molecular‐Transport Properties using the Superconducting Proximity Effect

Molecular electronics research focuses on the study and application of molecular building blocks for the fabrication of nanoscale electronic devices, and on utilizing their self‐organization properties to achieve large‐scale electronic circuits. One of the key issues in molecular electronics is to identify the mechanism governing the electrical conductivity along the molecules. More specifically, the problem is to determine whether the junction behaves as a tunnel barrier, or the junction provides electron or hole conduction channels through the molecule. Due to the large energy gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), it is usually assumed in calculations that the molecule may contain only one conducting channel either for electrons or for holes. Experimentally, measurements using a local‐probe tip or a small gap between two metallic leads strongly depend on the nature of the linkage between the molecules and the contacts, which is hard to optimize. Here, a new approach is presented to study the electronic and transport properties of molecules using the superconducting proximity effect. Insight into these properties is gained by monitoring the modifications of the superconducting properties upon linking nanoparticles to a superconductor via the studied molecules.

Katzir, Eran↗

Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization

Two-photon polymerization (TPP) is a laser writing process that enables fabrication of millimeter scale three-dimensional (3D) structures with submicron features. In TPP, writing is achieved via nonlinear two-photon absorption that occurs at high laser intensities. Thus, it is essential to carefully select the incident power to prevent laser damage during polymerization. Currently, the feasible range of laser power is identified by writing small test patterns at varying power levels. Here in this paper, we demonstrate that the results of these tests cannot be generalized, because the damage threshold power depends on the proximity of features and reduces by as much as 47% for overlapping features. We have identified that this reduction occurs primarily due to an increase in the single-photon absorptivity of the resin after curing. We have captured the damage from proximity effects via X-ray 3D computed tomography (CT) images of a non-homogenous part that has varying feature density. Part damage manifests as internal spherical voids that arise due to boiling of the resist. We have empirically quantified this proximity effect by identifying the damage threshold power at different writing speeds and feature overlap spacings. In addition, we present a first-order analytical model that captures the scaling of this proximity effect. Based on this model and the experiments, we have identified that the proximity effect is more significant at high writing speeds; therefore, it adversely affects the scalability of manufacturing. The scaling laws and the empirical data generated here can be used to select the appropriate TPP writing parameters.

36 MATERIALS SCIENCE↗

Exploratory Study of Ground Proximity Effects on Thrust of Annular and Circular Nozzles

The proximity of the ground to an annular nozzle can result in thrust augmentation of up to 50 percent. The magnitude of thrust augmentation was a function of ground-to-nozzle distance, nozzle configuration, and nozzle pressure ratio. With a conventional circular nozzle a thrust reduction of 15 to 40 percent due to ground effect was obtained. The degree of thrust reduction was primarily a function of nozzle pressure ratio and ground-to-nozzle distance.

BOOSTER SYSTEMS AUXILIARY - GAS TURBINES↗