SEARCH · Engineering Papers

Results for “PPb”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Water Vapor in Titan's Stratosphere from Cassini/CIRS Far-infrared Spectra

Since the first detection of water vapor in Titan's stratosphere by disk-average observations from the Infrared Space Observatory (Coustenis et al. 1998) we report here the successful detection of stratospheric water vapor using the Cassini Composite Infrared Spectrometer (CIRS, Flasar et al. 2004). CIRS senses water emissions in the far infrared spectral region near 50 microns, which we have modeled using two independent radiative transfer codes (NEMESIS, Irwin et al 2008 and ART, Coustenis et al. 2007, 2010). From the analysis of nadir spectra we have derived a mixing ratio of (0.14 0.05) ppb at an altitude of 97 kilometers, which corresponds to an integrated (from 0 to 600 kilometers) surface normalized column abundance of (3.7 plus or minus 1.3) x 10(exp 14) molecules per square centimeter. In the latitude range 80 S to 30 N we see no evidence for latitudinal variations in these abundances within the error bars. Using limb observations, we obtained mixing ratios of (0.13 plus or minus 0.04) ppb at an altitude of 115 kilometers and (0.45 plus or minus 0.15) ppb at an altitude of 230 kilometers, confirming that the water abundance has a positive vertical gradient as predicted by photochemical models (e.g. Lara et al. 1996, Wilson and Atreya 2004, Horst et al. 2008); retrieved scaling factors (from approximately 0.1 to approximately 0.6) to the water profile suggested by these models show that water vapor is present in Titan stratosphere with less abundance than predicted.

Cottini, V.↗

NASA NTRS2012

Miniaturized Gas Correlation Radiometer for the Detection of Trace Gases in the Martian Atmosphere

We present a miniaturized and simplified version of a gas correlation radiometer (GCR) capable of simultaneously mapping multiple trace gases and identifying active regions on the Mars surface. Gas correlation radiometry (GCR) has been shown to be a sensitive and versatile method for detecting trace gases in Earth's atmosphere. Reduction of the size and mass of the GCR was achieved by implementing compact, light-weight 1 mm inner diameter hollow-core optical fibers (hollow waveguides) as the gas correlation cells. In a comparison with an Earth orbiting CO2 GCR instrument, exchanging the 10 m multipass cells with hollow waveguide gas correlation cells of equivalent path length reduces the mass from approximately 150 kg to approximately 0.5 kg, and reduces the volume from 1.9 m x 1.3 m x 0.86 m to a small bundle of fiber coils approximately 1 meter in diameter by 0.05 m in height (mass and volume reductions of greater than 99%). A unique feature of this instrument is its stackable module design, with a single module for each trace gas. Each of the modules is self-contained, and fundamentally identical; differing by the bandpass filter wavelength range and gas mixtures inside the hollow-waveguide absorption cells. The current configuration contains four stacked modules for simultaneous measurements of methane (CH4), formaldehyde (H2CO), water vapor (H2O), and deuterated water vapor (HDO) but could easily be expanded to include measurements of additional species of interest including nitrous oxide (N2O), hydrogen sulfide (H2S), methanol (CH3OH), and sulfur dioxide (SO2), as well as carbon dioxide (CO2) for a simultaneous measure of mass balance. Preliminary results indicate that a 1 ppb detection limit is possible for both formaldehyde and methane with one second of averaging. Using non-optimized components, we have demonstrated an instrument sensitivity equivalent to approximately 30 ppb for formaldehyde, and approximately 500 ppb for methane. We expect custom bandpass filters and 6 m long waveguides to significantly improve these promising results. Ongoing testing is being conducted on water vapor and deuterated water vapor.

Melroy, Hilary R.↗

NASA NTRS2012

The Amino Acid Composition of the Sutter's Mill Carbonaceous Chondrite

In contrast to the Murchison meteorite which had a complex distribution of amino acids with a total C2 to Cs amino acid abundance of approx.14,000 parts-per-billion (ppb) [2], the Sutters Mill meteorite was found to be highly depleted in amino acids. Much lower abundances (approx.30 to 180 ppb) of glycine, beta-alanine, L-alanine and L-serine were detected in SM2 above procedural blank levels indicating that this meteorite sample experienced only minimal terrestrial amino acid contamination after its fall to Earth. Carbon isotope measurements will be necessary to establish the origin of glycine and beta-alanine in SM2. Other non-protein amino acids that are rare on Earth, yet commonly found in other CM meteorites such as aaminoisobutyric acid (alpha-AIB) and isovaline, were not identified in SM2. However, traces of beta-AIB (approx.1 ppb) were detected in SM2 and could be" extraterrestrial in origin. The low abundances of amino acids in the Sutter's Mill meteorite is consistent with mineralogical evidence that at least some parts of the Sutter's Mill meteorite parent body experienced extensive aqueous and/or thermal alteration.

Glavin, D. P.↗

NASA NTRS2012

Water Vapor in Titan's Stratosphere from Cassini CIRS Far-Infrared Spectra

Here we report the measurement of water vapor in Titan's stratosphere using the Cassini Composite Infrared Spectrometer (CIRS). CIRS senses water emissions in the far infrared spectral region near 50 micron, which we have modeled using two independent radiative transfer codes. From the analysis of nadir spectra we have derived a mixing ratio of 0.14 +/- 0.05 ppb at an altitude of 97 km, which corresponds to an integrated (from 0 to 600 km) surface normalized column abundance of 3.7 +/- 1.3 1014 molecules/cm2. In the latitude range 80S to 30N we see no evidence for latitudinal variations in these abundances within the error bars. Using limb observations, we obtained mixing ratios of 0.13 +/- 0.04 ppb at an altitude of 115 km and 0.45 +/- 0.15 ppb at an altitude of 230 km, confirming that the water abundance has a positive vertical gradient as predicted by photochemical models. We have also fitted our data using scaling factors of 0.1-0.6 to these photochemical model profiles, indicating that the models over-predict the water abundance in Titan's lower stratosphere.

composition↗

NASA NTRS2014

Sensitivity of Air Quality to Potential Future Climate Change and Emissions in the United States and Major Cities

Simulated present and future air quality is compared for the years 2006e2010 and 2048e2052 over the contiguous United States (CONUS) using the Community Multi-scale Air Quality (CMAQ) model. Regionally downscaled present and future climate results are developed using GISS and the Weather Research Forecasting (WRF) model. Present and future emissions are estimated using MARKAL 9R model. O3 and PM(sub 2.5) sensitivities to precursor emissions for the years 2010 and 2050 are calculated using CMAQDDM (Direct Decoupled Method). We find major improvements in future U.S. air quality including generally decreased MDA8 (maximum daily 8-hr average O3) mixing ratios and PM(sub 2.5) concentrations and reduced frequency of NAAQS O3 standard exceedances in most major U.S. cities. The Eastern and Pacific U.S. experience the largest reductions in summertime seasonal average MDA8 (up to 12 ppb) with localized decreases in the 4th highest MDA8 of the year, decreasing by up to 25 ppb. Results from a Climate Penalty (CP) scenario isolate the impact of climate change on air quality and show that future climate change tends to increase O3 mixing ratios in some regions of the U.S., with climate change causing increases of over 10 ppb in the annual 4th highest MDA8 in Los Angeles. Seasonal average PM(sub 2.5) decreases (2-4 microgram m(exp -3)) over the Eastern U.S. are accounted for by decreases in sulfate and nitrate concentrations resulting from reduced mobile and point source emissions of NO(sub x) and SO(sub x).

Projecting emissions↗

NASA NTRS2018

The Origin of Titan's External Oxygen: Further Constraints from ALMA Upper Limits on CS and CH2NH

Titan's atmospheric inventory of oxygen compounds (H2O, CO2, CO) are thought to result from photochemistry acting on externally supplied oxygen species (O+, OH, H2O). These species potentially originate from two main sources: (1) cryogenic plumes from the active moon Enceladus and (2) micrometeoroid ablation. Enceladus is already suspected to be the major O+ source, which is required for CO creation. However, photochemical models also require H2O and OH influx to reproduce observed quantities of CO2 and H2O. Here, we exploit sulphur as a tracer to investigate the oxygen source because it has very different relative abundances in micrometeorites (S/O approx. 10(exp -2) and Enceladus' plumes (S/O approx. 10(exp -5). Photochemical models predict most sulphur is converted to CS in the upper atmosphere, so we use Atacama Large Millimeter/submillimeter Array (ALMA) observations at approx. 340 GHz to search for CS emission. We determined stringent CS 3 sigma stratospheric upper limits of 0.0074 ppb (uniform above 100 km) and 0.0256 ppb (uniform above 200 km). These upper limits are not quite stringent enough to distinguish between Enceladus and micrometeorite sources at the 3 sigma level and a contribution from micrometeorites cannot be ruled out, especially if external flux is toward the lower end of current estimates. Only the high flux micrometeorite source model of Hickson et al. can be rejected at 3 sigma. We determined a 3 sigma stratospheric upper limit for CH2NH of 0.35 ppb, which suggests cosmic rays may have a smaller influence in the lower stratosphere than predicted by some photochemical models. Disk-averaged C3H4 and C2H5CN profiles were determined and are consistent with previous ALMA and Cassini/CIRS measurements.

Teanby, N.A.↗

NASA NTRS2018

Maximum Sample Temperature for Mars Sample Return: A Historical Perspective

Since the first Mars Sample Return (MSR) report published by the Jet Propulsion Laboratory (JPL) in 1974 [1], a series of panels, reports, and white papers have recognized the importance of sample temperature and offered an informed sample maximum temperature (henceforth SMT) limit for returning martian samples to Earth. The Mars Sample Handling and Requirements Panel (MSHARP, 1999) stated that "[t]he main issue in sample preservation is temperature" [2]. More recently, the Mars Exploration Program Analysis Group (MEPAG)'s "Science Priorities for Mars Sample Return" report (2008), declared that "[s]ignificant loss, particularly to biological studies, occurs if samples reach +50C for three hours", whereby "scientific objectives related to life goals could be seriously compromised" [3]. By contrast, the Mars 2020 mission has adopted a SMT of +60C as spelled out in Beaty et al., 2016 [4]. Samples will be collected and then deposited on the surface in sealed tubes for possible retrieval and return to Earth. Beaty et al. [4] calculates that the samples will experience maximum temperatures of ~+30 to +60C, depending on latitude. At present, there is no mission requirement for the measurement/data logging of sample temperature during this period. We will explore the history of martian SMTs, as they have been recorded since 1974 [1], effectively representing input across multiple generations of Mars scientists. Ten separate publications present SMTs for MSR samples [1-10]. One report [10] is for a mission concept specifically designed to exclude life detection investigations, and recommended an SMT of 50C. Another did not specify a temperature, recommending "Mars ambient temperature" [5]. Of the remaining eight, SMTs are given as: -30C [1], -20C [3], 60C [4], -73 to 41C depending on sample type [6], -40C [7], -43 to 13C depending on type [2,8], and -33C [9]. If we restrict the temperatures to samples highlighted in the Mars 2020 mission goals, i.e. organics-bearing and sedimentary rocks, then the average SMT is -28+/-39C (n=8). Applying a Dixon's Q Test at P=0.05 (two-tailed), the 60C SMT [4] fails with Q=0.602 versus Qcrit=0.526. Excluding the outlier produces an average SMT of -40+/-17C (n=7). Therefore, the average SMT expressed by the Mars science community over the past 44 years (two generations) is a sample temperature no greater than -40C. The difference in chemical reaction rates between this average SMT and Beaty et al [4] can be estimated using the Arrhenius equation. Assuming a generic chemical reaction with an activation energy of 50 kJ/mol and a pre-exponential factor invariant with temperature, this reaction will proceed 2300x faster at 60C than at -40C. To illustrate the effects of the increased reaction rate, consider 10 ppb of alanine in a Mars 2020 cache, and assume that it becomes unmeasurable if it degrades to 1 ppb, as per the Mars 2020 Organic Contamination Panel contamination limits [11]. If we illustrate the effect with an arbitrary degradation rate such that the alanine will become undetectable in ten years at -40C, then the same 10 ppb alanine degrades beyond detectability in only 38 days at 60C. Further research is required to quantify expected analyte losses in the cached samples due to thermal processing.

Fries, Marc↗

NASA NTRS2015

Airborne Observations of Carbon Dioxide and Methane Emission Ratios from the Yosemite Rim Wildfire, California

This paper presents airborne in situ measurements of carbon dioxide (CO2) and methane (CH4) downwind of an exceptionally large wildfire, the Rim Fire, near Yosemite, California, during two flights. Data analyses are discussed in terms of emission ratios (ER) and emission factors (EF) and are compared to previous studies. CH4 ER’s were 7.5-7.9 parts per billion (ppb) CH4 for every 1 part per million (ppm) of CO2 (ppb CH4 (ppm CO2)(exp.-1)) on 29 August 2013 and 14.2-16.7 ppb CH4 (ppm CO2)(exp. -1) on 10 September 2013. This study measured only CO2 and CH4; however, estimated emission factors (EEF’s) are used as rough estimates of EF’s of CO2 and CH4 and are in close agreement with EF’s reported in previous studies. In the western US, wildfires dominate over prescribed fires, contributing to atmospheric trace gas budgets and regional and local air pollution. Limited sampling of emissions from wildfires means western US emission estimates rely largely on data from prescribed fires, which may not be a suitable proxy for wildfire emissions. Given the magnitude of the Yosemite Rim wildfire, the impacts it had on regional air quality and the limited sampling of wildfire emissions in the western US to date, this study provides a valuable measurement dataset and may have important implications for forestry and regional air quality management.

Yates, Emma L.↗

NASA NTRS2019

Trends and Seasonal Variability of Atmospheric NO2 and HNO3 Concentrations Across Three Major African Biomes Inferred from Long-Term Series of Ground-Based and Satellite Measurements

In the framework of the INDAAF (International Network to study Deposition and Atmospheric chemistry in AFrica) programme, part of the ACTRIS (Aerosols, Clouds, and Trace gases Research InfraStructure), European Research Infrastructure for the long-term observation of Aerosol, Cloud, and Trace gases, this paper aims to study trends and seasonal variability of surface atmospheric NO2 and HNO3 concentrations, and OMI (Ozone Monitoring Instrument) NO2 over 6 sites in tropical Africa. Sites are located in west and central Africa to represent the major African biomes: dry savanna (Banizoumbou, Niger and Katibougou, Mali), wet savanna (Djougou, Benin and Lamto, Côte d’Ivoire) and forest (Bomassa, Republic of Congo and Zoétélé, Cameroon). Ground-based NO2 and HNO3 concentrations were obtained over the period 1998–2015 using INDAAF passive samplers at a monthly basis, and NO2 Vertical Column Densities (VCDs) from OMI for a 1-degree grid cell around each sites were obtained from 2005 to 2015. Mean annual NO2 concentrations ranged from 2.3 plus or minus 1.2 to 0.9 plus or minus 0.4 parts per billion (ppb) from dry savannas to forests, representing a north-south gradient. In dry savannas, we observe two concentration peaks of NO2 appearing at the beginning and the end of the wet season both for ground-based and satellite measurements, whereas at wet savannas and forest sites, NO2 concentrations are highest in the dry season. The seasonality of surface NO2 observations provide further evidence for a large role of microbial soil NOx emissions in dry savannas and of biomass burning NOx emissions in wet savanna and forest sites. Mean annual HNO3 concentrations ranged from 0.4 to 0.5 ppb in dry and wet savannas to 0.2 to 0.3 ppb in forest. In dry ecosystems, higher HNO3 concentrations are measured in the early wet season, consistent with NO2 results. The analysis of a long-term dataset of surface O3 concentrations indicates that HNO3 production can mainly be explained by the photo-oxidation of NOx. Mann-Kendall and Seasonal Kendall statistical tests showed that NO2 surface concentrations have a significant decreasing seasonal and annual trends at multiple sites (p-value less than 0.05) ranging from -2.96 percent per year (at Zoétélé) to -0.64 percent per year (at Banizoumbou). HNO3 results indicate no trends except at Bomassa (1.07 percent per year). The decreasing NO2 ground-based concentration trends observed in wet savannas sites are correlated with OMI NO2 decreasing trends at these sites. Trends obtained for NO2 concentrations in wet savanna and forest ecosystems are consistent with trends of NOₓ biomass burning emissions.

Trends↗

NASA NTRSDate not supplied

Double ChemFET for the In-Line Monitoring of Silver Dosing in Potable Water Systems

With NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) baselining ionic silver (Ag+) as the biocide of choice, development in silver monitoring technologies becomes necessary to monitor and control Ag+ release. Ion-selctive field effect transistors (ISFETs) and chemically-sensitive field effect transistors (ChemFETs) are capable of selective detection of Ag+ with reversible and low detection limit responses. However, one major hurdle to ChemFET technologies is the requirement of a reference electrode, which can leak its fill solution into the potable water system and is prone to drift requiring frequent calibration. To circumvent this issue, we are developing a double chemically-sensitive field effect transistor (dChemFET). The dChemFET uses a second ChemFET to selectively monitor the counter ion and serves in place of the reference electrode. We report our work in developing the dChemFET, starting with the development of the Ag+ and NO3- ion selective memberanes (ISMs) to be used in the ChemFETs. The Ag+ ISM has a detection range of 50-105 ppb . The counter ion ISM, NO3- ISM, has shown a detection range of 400-105 ppb. NO3- ISMs are limited in detecting at lower ppb levels required for the dChemFET application on the potable water system. In response to this issue, we also report our studies in using the Ag+ ISM to measure deionized (DI) water as a reference measurement to be implemented in-line before the Ag+ is dosed.

Lance Dean Delzeit↗

NASA NTRSDate not supplied

Analysis of Atmospheric Conditions Responsible for an Ozone Exceedance Event in Southeast Virginia on June 15, 2022

On June 15, 2022, the Virginia Department of Environmental Quality monitoring site at Suffolk/Holland, a rural site in southeast Virginia, recorded its first ozone exceedance since 2016. An ozone exceedance day occurs when the daily maximum 8-hour average surface ozone concentration is greater than 70 ppb. On this day, it was 75 ppb. This event is also noteworthy due to the rapid increase in surface ozone between 6 am and 9 am EDT as well as the hourly maximum ozone concentration of 82 ppb that was measured at 1 pm EDT. In this analysis, we utilize various observational and model data to determine the atmospheric conditions responsible for this ozone exceedance event. The analysis is conducted in two parts: (1) an evaluation of the accuracy of the GEOS-CF and WRF-Chem model forecasts and (2) an investigation of the mechanisms responsible for the high surface ozone at the Virginia DEQ Suffolk/Holland monitoring site. Comparisons of model forecasted ozone time-height cross sections with measured ozone by lidars from the Tropospheric Ozone Lidar Network (TOLNet) at NASA Langley and NASA Goddard reveal that both models forecasted ozone reasonably well near the surface. Model and observational data reveal that an upper-level ridge was present over much of the eastern United States, with a broad anticyclonic circulation near the surface, resulting in north-northeasterly flow over southeast Virginia. Back trajectory calculations using the Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT) and model data suggest that a low-level plume rich in ozone and precursor species originating from the New York City and New Jersey region was transported along the east coast between June 14 and June 15, arriving in southeast Virginia around 6 am EDT on June 15. In the early morning hours, this plume mixed down to the surface, elevating the background ozone mixing ratio as well as the mixing ratios of several precursor species. Other potential contributions are also explored and discussed. Lastly, the authors note that this work represents the analysis of the authors and not the Virginia Department of Environmental Quality.

Daniel B Phoenix↗

NASA NTRS2023

AMORE-Isoprene v1.0: A New Reduced Mechanism for Gas-Phase Isoprene Oxidation

Gas-phase oxidation of isoprene by ozone (O 3 ) and the hydroxyl (OH) and nitrate (NO 3 ) radicals significantly impacts tropospheric oxidant levels and secondary organic aerosol formation. The most comprehensive and up-to-date chemical mechanism for isoprene oxidation consists of several hundred species and over 800 reactions. Therefore, the computational expense of including the entire mechanism in large-scale atmospheric chemical transport models is usually prohibitive, and most models employ reduced isoprene mechanisms ranging in size from ∼ 10 to ∼ 200 species. We have developed a new reduced isoprene oxidation mechanism using a directed-graph path-based automated model reduction approach, with minimal manual adjustment of the output mechanism. The approach takes as inputs a full isoprene oxidation mechanism, the environmental parameter space, and a list of priority species which are protected from elimination during the reduction process. Our reduced mechanism, AMORE-Isoprene (where AMORE stands for Automated Model Reduction), consists of 12 species which are unique to the isoprene mechanism as well as 22 reactions. We demonstrate its performance in a box model in comparison with experimental data from the literature and other current isoprene oxidation mechanisms. AMORE-Isoprene's performance with respect to predicting the time evolution of isoprene oxidation products, including isoprene epoxydiols (IEPOX) and formaldehyde, is favorable compared with other similarly sized mechanisms. When AMORE-Isoprene is included in the Community Regional Atmospheric Chemistry Multiphase Mechanism 1.0 (CRACMM1AMORE) in the Community Multiscale Air Quality Model (CMAQ, v5.3.3), O 3 and formaldehyde agreement with Environmental Protection Agency (EPA) Air Quality System observations is improved. O 3 bias is reduced by 3.4 ppb under daytime conditions for O 3 concentrations over 50 ppb. Formaldehyde bias is reduced by 0.26 ppb on average for all formaldehyde measurements compared with the base CRACMM1. There was no significant change in computation time between CRACMM1AMORE and the base CRACMM. AMORE-Isoprene shows a 35 % improvement in agreement between simulated IEPOX concentrations and chamber data over the base CRACMM1 mechanism when compared in the Framework for 0-D Atmospheric Modeling (F0AM) box model framework. This work demonstrates a new highly reduced isoprene mechanism and shows the potential value of automated model reduction for complex reaction systems.

Automated Model Reduction↗

NASA NTRS1969

Testing the Fraunhofer line discriminator by sensing fluorescent dye

The experimental Fraunhofer Line Discriminator (FLD) has detected increments of Rhodamine WT dye as small as 1 ppb in 1/2 meter depths. It can be inferred that increments considerably smaller than 1 ppb will be detectable in depths considerably greater than 1/2 meter. Turbidity of the water drastically reduces luminescence or even completely blocks the transmission of detectable luminescence to the FLD. Attenuation of light within the water by turbidity and by the dye itself are the major factors to be considered in interpreting FLD records and in relating luminescence coefficient to dye concentration. An airborne test in an H-19 helicopter established feasibility of operating the FLD from the aircraft power supply, and established that the rotor blades do not visibly affect the monitoring of incident solar radiation.

Stoertz, G. E.↗

NASA NTRS1972

Search for extinct natural radioactivity of Pb205 via thallium-isotope anomalies in chondrites and lunar soil.

Thallium and Pb204 contents were determined by stable-isotope-dilution analysis in 16 chondrites, one achondrite, and Apollo 11 and 12 lunar fines. Meteoritic thallium contents vary over a large range, 0.02 to 100 ppb, corresponding to the fact that thallium is a highly fractionated volatile element. Lunar thallium contents are less than 5 ppb. The Tl205/Tl203 ratio was determined in most of the samples, with precision ranging from 0.03% to several percent depending mainly on the amount of thallium present. No variations from the terrestrial ratio were observed. The chondritic isochron slope for Pb205 (13.8-m.y. half-life) is less than or equal to 0.00009 (99% confidence level), corresponding to an interval of at least 60 m.y. and possibly exceeding 120 m.y. between the termination of s-process nucleosynthesis and the lead-thallium fractionations.

Huey, J. M.↗

NASA NTRS1973

Geochemistry of primordial Pb, Bi, and Zn in Apollo 15 samples

Primordial Pb as Pb-204 is present in Apollo 15 samples in concentrations ranging from less than 0.2 ppb in basalts to 6 ppb in soils. An acid soluble, pH-5-6, readily volatile component of this Pb is present, possibly as PbBr2; the remainder is correlated with the metal content of the sample. Leachable Bi and Pb-204 are correlated; residual Bi is probably present in a phosphate, possibly apatite. Zn is also highly leachable; residual Zn and Pb-204 are correlated.

Allen, R. O., Jr.↗

NASA NTRS1975

Volatile organic components in the Skylab 4 spacecraft atmosphere

The volatile organic components in the spacecraft cabin atmosphere of Skylab 4 were trapped on a solid adsorbent at various times during the mission. In post-flight analyses, more than 300 compounds in concentrations from less than 1 ppb up to 8000 ppb could be detected by high-resolution gas chromatography. In the samples of the 11th, 47th, and 77th day of the mission, approximately 100 components in the molecular weight range from 58 to 592 were identified by mass spectrometry. Besides components known from other environments, such as alkanes, alkenes, and alkylated aromatic hydrocarbons, components typical of the human metabolism, such as ketones and alcohols, were found. Other typical components in the spacecraft atmosphere included fluorocarbons and various silicone compounds, mostly normal and cyclic methylsiloxanes.

Liebich, H. M.↗

NASA NTRS1976

Remote sensing of atmospheric pollutant gases using an infrared heterodyne spectrometer

Remote sensing of the concentration and vertical distribution of atmospheric gases using an infrared heterodyne spectrometer (IHS) has been investigated, and a dual (C-13)(O-16)2 laser multichannel IHS has been developed. Analyses of nadir thermal-radiance measurements from an aircraft at 10-km altitude and of solar absorption measurements from the ground indicate that initial applications of the IHS to tropospheric measurements of NH3 and O3 are feasible with measurement precisions ranging from 0.5 to 2 ppb and 20 to 30 ppb, respectively. These analyses have included effects of potential retrieval-error sources and have resulted in specifications of measurement modes, optimum signature lines, required system parameters, and expected sensitivities. Preliminary instrument performance data are presented.

Seals, R. K., Jr.↗

NASA NTRS1975

Chlorine bleaches - A significant long term source of mercury pollution

Products of industrial electrolysis of brine - NaOCl-based bleaches and NaOH - yielded 17 to 1290 ppb of Hg upon flameless atomic absorption analysis. Compared with current U.S. rejection value of 5 ppb for potable waters, the above levels seem sufficiently high to be a matter of environmental concern.

Siegel, S. M.↗