Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POPLARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Elucidating the drought-responsive changes in Poplar cuticular waxes: A GWAS analysis of genes involved in fatty acid biosynthesis

Drought and episodic drought events are major impending impacts of climate change, limiting the productivity of plants and especially trees due to their inherent high transpiration rates. One common mechanism used by plants to cope with drought stress is to change the composition of their leaf cuticular waxes. Cuticular waxes are essential for controlling non-stomatal water loss and are typically composed of a homologous series of very-long-chain fatty acid-derived compounds, as well as flavonoids, tocopherols, triterpenoids, and phytosterols. In this study, we compared the cuticular waxes of 339 natural accessions of Populus trichocarpa (black cottonwood) grown under control and drought conditions in a common garden. A Genome-Wide Association Study (GWAS) was then used to identify candidate genes associated with cuticular wax biosynthesis and/or its regulation. Although no major differences were observed in total wax load when subject to drought conditions, the amounts of the individual wax constituents were indeed responsive to drought. Specifically, changes in alkenes, alcohols, esters, and aldehydes were evident, and suggest that they contribute to the drought response/tolerance in poplar. GWAS uncovered several genes linked to fatty acid biosynthesis, including CER1, CER3, CER4, FATB, FAB1, FAR3, FAR4, KCS, and a homolog of SOH1, as well as other candidate genes that may be involved in coordinating the drought responses in poplar trees. Our findings provide new evidence that genotype-specific shifts in wax composition, rather than total wax accumulation, contribute to drought adaptation in poplar. Additionally, we show that genetic variation in key wax biosynthetic genes drives cuticular wax plasticity in P. trichocarpa under drought, identifying putative molecular targets for improving stress resilience in trees. This study expands our understanding of the adaptative mechanisms of the cuticle and their potential for enhancing drought tolerance in poplar species.

Alkanes↗

Breeding progress and preparedness for mass‐scale deployment of perennial lignocellulosic biomass crops switchgrass, miscanthus, willow and poplar

Abstract Genetic improvement through breeding is one of the key approaches to increasing biomass supply. This paper documents the breeding progress to date for four perennial biomass crops (PBCs) that have high output–input energy ratios: namely Panicum virgatum (switchgrass), species of the genera Miscanthus (miscanthus), Salix (willow) and Populus (poplar). For each crop, we report on the size of germplasm collections, the efforts to date to phenotype and genotype, the diversity available for breeding and on the scale of breeding work as indicated by number of attempted crosses. We also report on the development of faster and more precise breeding using molecular breeding techniques. Poplar is the model tree for genetic studies and is furthest ahead in terms of biological knowledge and genetic resources. Linkage maps, transgenesis and genome editing methods are now being used in commercially focused poplar breeding. These are in development in switchgrass, miscanthus and willow generating large genetic and phenotypic data sets requiring concomitant efforts in informatics to create summaries that can be accessed and used by practical breeders. Cultivars of switchgrass and miscanthus can be seed‐based synthetic populations, semihybrids or clones. Willow and poplar cultivars are commercially deployed as clones. At local and regional level, the most advanced cultivars in each crop are at technology readiness levels which could be scaled to planting rates of thousands of hectares per year in about 5 years with existing commercial developers. Investment in further development of better cultivars is subject to current market failure and the long breeding cycles. We conclude that sustained public investment in breeding plays a key role in delivering future mass‐scale deployment of PBCs.

09 BIOMASS FUELS↗

Poplar PtabZIP1-like enhances lateral root formation and biomass growth under drought stress

Developing drought-resistance varieties is a major goal for bioenergy crops, such as poplar (Populus), which will be grown on marginal lands with little or no water input. Root architecture can affect drought resistance, but few genes that affect root architecture in relation to water availability have been identified. Here in this study, using activation tagging in the prime bioenergy crop poplar, we have identified a mutant that overcomes the block of lateral root (LR) formation under osmotic stress. Positioning of the tag, validation of the activation and recapitulation showed that the phenotype is caused by the poplar PtabZIP1-like (PtabZIP1L) gene with highest homology to bZIP1 from Arabidopsis. PtabZIP1L is predominantly expressed in roots, particularly in zones where lateral root primordia (LRP) initiate and LR differentiate and emerge. Transgenics overexpressing PtabZIP1L showed precocious LRP and LR development, while PtabZIP1L suppression significantly delayed both LRP and LR formation. Transgenic overexpression and suppression of PtabZIP1L also resulted in modulation of key metabolites like proline, asparagine, valine and several flavonoids. Consistently, expression of both of the poplar Proline Dehydrogenase orthologs and two of the Flavonol Synthases genes was also increased and decreased in overexpressed and suppressed transgenics, respectively. These findings suggest that PtabZIP1L mediates LR development and drought resistance through modulation of multiple metabolic pathways.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of lignin content on changes occurring in poplar cellulose ultrastructure during dilute acid pretreatment

Obtaining a better understanding of the complex mechanisms occurring during lignocellulosic deconstruction is critical to the continued growth of renewable biofuel production. A key step in bioethanol production is thermochemical pretreatment to reduce plant cell wall recalcitrance for downstream processes. Previous studies of dilute acid pretreatment (DAP) have shown significant changes in cellulose ultrastructure that occur during pretreatment, but there is still a substantial knowledge gap with respect to the influence of lignin on these cellulose ultrastructural changes. This study was designed to assess how the presence of lignin influences DAP-induced changes in cellulose ultrastructure, which might ultimately have large implications with respect to enzymatic deconstruction efforts. Native, untreated hybrid poplar (Populus trichocarpa x Populus deltoids) samples and a partially delignified poplar sample (facilitated by acidic sodium chlorite pulping) were separately pretreated with dilute sulfuric acid (0.10 M) at 160°C for 15 minutes and 35 minutes, respectively . Following extensive characterization, the partially delignified biomass displayed more significant changes in cellulose ultrastructure following DAP than the native untreated biomass. With respect to the native untreated poplar, delignified poplar after DAP (in which approximately 40% lignin removal occurred) experienced: increased cellulose accessibility indicated by increased Simons’ stain (orange dye) adsorption from 21.8 to 72.5 mg/g, decreased cellulose weight-average degree of polymerization (DP w ) from 3087 to 294 units, and increased cellulose crystallite size from 2.9 to 4.2 nm. These changes following DAP ultimately increased enzymatic sugar yield from 10 to 80%. We conclude that, overall, the results indicate a strong influence of lignin content on cellulose ultrastructural changes occurring during DAP. With the reduction of lignin content during DAP, the enlargement of cellulose microfibril dimensions and crystallite size becomes more apparent. Further, this enlargement of cellulose microfibril dimensions is attributed to specific processes, including the co-crystallization of crystalline cellulose driven by irreversible inter-chain hydrogen bonding (similar to hornification) and/or cellulose annealing that converts amorphous cellulose to paracrystalline and crystalline cellulose. Essentially, lignin acts as a barrier to prevent cellulose crystallinity increase and cellulose fibril coalescence during DAP.

60 APPLIED LIFE SCIENCES↗

Composition and yield of non-cellulosic and cellulosic sugars in soluble and particulate fractions during consolidated bioprocessing of poplar biomass by Clostridium thermocellum

Abstract Background Terrestrial plant biomass is the primary renewable carbon feedstock for enabling transition to a sustainable bioeconomy. Consolidated bioprocessing (CBP) by the cellulolytic thermophile Clostridium thermocellum offers a single step microbial platform for production of biofuels and biochemicals via simultaneous solubilization of carbohydrates from lignocellulosic biomass and conversion to products. Here, solubilization of cell wall cellulosic, hemicellulosic, and pectic polysaccharides in the liquor and solid residues generated during CBP of poplar biomass by C. thermocellum was analyzed. Results The total amount of biomass solubilized in the C. thermocellum DSM1313 fermentation platform was 5.8, 10.3, and 13.7% of milled non-pretreated poplar after 24, 48, and 120 h, respectively. These results demonstrate solubilization of 24% cellulose and 17% non-cellulosic sugars after 120 h, consistent with prior reports. The net solubilization of non-cellulosic sugars by C. thermocellum (after correcting for the uninoculated control fermentations) was 13 to 36% of arabinose (Ara), xylose (Xyl), galactose (Gal), mannose (Man), and glucose (Glc); and 15% and 3% of fucose and glucuronic acid, respectively. No rhamnose was solubilized and 71% of the galacturonic acid (GalA) was solubilized. These results indicate that C. thermocellum may be selective for the types and/or rate of solubilization of the non-cellulosic wall polymers. Xyl, Man, and Glc were found to accumulate in the fermentation liquor at levels greater than in uninoculated control fermentations, whereas Ara and Gal did not accumulate, suggesting that C. thermocellum solubilizes both hemicelluloses and pectins but utilizes them differently. After five days of fermentation, the relative amount of Rha in the solid residues increased 21% indicating that the Rha-containing polymer rhamnogalacturonan I (RG-I) was not effectively solubilized by C. thermocellum CBP, a result confirmed by immunoassays. Comparison of the sugars in the liquor versus solid residue showed that C. thermocellum solubilized hemicellulosic xylan and mannan, but did not fully utilize them, solubilized and appeared to utilize pectic homogalacturonan, and did not solubilize RG-I. Conclusions The significant relative increase in RG-I in poplar solid residues following CBP indicates that C. thermocellum did not solubilize RG-I. These results support the hypothesis that this pectic glycan may be one barrier for efficient solubilization of poplar by C. thermocellum .

09 BIOMASS FUELS↗

Nitrate Leaching from Continuous Corn, Perennial Grasses, and Poplar in the US Midwest

Leaching from annual corn ( Zea mays L.) crops is a primary source of nitrate (NO 3 - ) pollution of ground and surface waters. Here, we compare NO 3 - losses from no-till corn with losses from various alternative perennial cropping systems (switchgrass [ Panicum virgatum L.], miscanthus [ Miscanthus ×giganteus J.M. Greef & Deuter ex Hodkinson & Renvoiz], a native grass mixture, and restored prairie), as well as hybrid poplar ( Populus nigra L. × P. maximowiczii A. Henry ‘NM6’), all grown on a well-drained soil in Michigan. Soil water was sampled from below the root zone using suction cup samplers during nonfrozen periods (March–November) between 2009 and 2016. Leaching was estimated from NO 3 - concentrations in soil water and modeled drainage (percolation) rates. Drainage rates were not significantly different among crops, constituting ~30% of total annual precipitation. Aboveground net primary production (Mg ha -1 yr -1 ) averaged across the 7 yr was highest in poplar (30.8 ± 1.9 [SE]) followed by miscanthus (23.9 ± 2.4) and corn (20.4 ± 0.9). Volume-weighted mean NO 3 - concentrations (mg N L -1 ) and NO 3 - leaching (kg ha -1 yr -1 ) averaged across the 7 yr were 9.2 and 34.1, 2.3 and 5.9, and 3.0 and 7.2, respectively, for corn, perennial grasses and poplar. Approximately 10 to 32% of applied N was lost as NO 3 - from these crops, with the highest percent losses from poplar (32%) followed by corn (20%). Perennial cropping systems leached considerably more NO 3 - in first few years after planting, but over 7 yr they lost much less NO 3 - than corn. Perennial crops may therefore help ameliorate NO 3 - pollution in agricultural landscapes even if they receive modest N fertilization.

54 ENVIRONMENTAL SCIENCES↗

Insights of Molecular Mechanism of Xylem Development in Five Black Poplar Cultivars

Black poplar (Populus deltoides, P. nigra, and their hybrids) is the main poplar cultivars in China. It offers interesting options of large-scale biomass production for bioenergy due to its rapid growth and high yield. Poplar wood properties were associated with chemical components and physical structures during wood formation. In this study, five poplar cultivars, P. euramericana ‘Zhonglin46’ (Pe1), P. euramericana ‘Guariento’ (Pe2), P. nigra ‘N179’ (Pn1), P. deltoides ‘Danhong’ (Pd1), and P. deltoides ‘Nanyang’ (Pd2), were used to explore the molecular mechanism of xylem development. We analyzed the structural differences of developing xylem in the five cultivars and profiled the transcriptome-wide gene expression patterns through RNA sequencing. The cross sections of the developing xylem showed that the cell wall thickness of developed fiber in Pd1 was thickest and the number of xylem vessels of Pn1 was the least. A total of 10,331 differentially expressed genes were identified among 10 pairwise comparisons of the five cultivars, most of them were related to programmed cell death and secondary cell wall thickening. K-means cluster analysis and Gene Ontology enrichment analysis showed that the genes highly expressed in Pd1 were related to nucleotide decomposition, metabolic process, transferase, and microtubule cytoskeleton; whereas the genes highly expressed in Pn1 were involved in cell wall macromolecule decomposition and polysaccharide binding processes. Based on a weighted gene co-expression network analysis, a large number of candidate regulators for xylem development were identified. And their potential regulatory roles to cell wall biosynthesis genes were validated by a transient overexpression system. This study provides a set of promising candidate regulators for genetic engineering to improve feedstock and enhance biofuel conversion in the bioenergy crop Populus.

59 BASIC BIOLOGICAL SCIENCES↗

Life Cycle Assessment of Bioethanol Production: A Case Study from Poplar Biomass Growth in the U.S. Pacific Northwest

Biomass appears to be one of the most prominent renewable resources for biofuels such as bioethanol, mainly due to its better environmental performance compared with fossil fuels. This study addresses a comprehensive environmental performance of bioethanol production, employing empirical data from hybrid poplar grown in the U.S. The study considers 1 MJ as a functional unit and employs a cradle-to-grave approach, which entails the feedstock and harvesting production of poplar, transport to a biorefinery, bioconversion of the biomass process, and fuel use. On average, bioconversion is the main contributor to environmental degradation in all the categories evaluated (77%). The second main contributor is either the feedstock and harvesting production of poplar (17%) or fuel use (6%), depending on the environmental category. Thus, focusing on only one category may induce a misinterpretation of the environmental performance of bioethanol production. Finally, environmental credits in the global warming potential (GWP) category were obtained from the carbon sequestered in the biomass during the growing period and from avoided fossil fuel emissions due to electricity production from a renewable source. This means that the net GWP of the life cycle of bioethanol from poplar biomass is slightly negative (–1.05 × 10 –3 kg CO 2 -eq·MJ –1 ).

09 BIOMASS FUELS↗

The practice and economics of hybrid poplar biomass production for biofuels and bioproducts in the Pacific Northwest

Hybrid poplar demonstration-scale farms were managed in Oregon, Washington, Idaho, and California to establish management practices, yields, harvesting methods, and the economics of biomass production. Yield during the 2-year establishment cycle averaged 3.5 dry Mg ha –1 year –1 increasing to 11.6 Mg ha –1 year –1 in the ensuing 3-year coppice cycle. Populus deltoides (Bartram ex Marsh.) × P. maximowiczii (Henry) varieties preformed best in Oregon during the coppice cycle with the best variety producing 18.1 Mg ha –1 year –1 , while P. ×generosa (Henry) varieties maximized yields in Washington at 22.1 Mg ha –1 year –1 . P. ×canadensis (Moench) varieties excelled in Idaho and California with upper yields of 13.6 Mg ha –1 year –1 and 12.9 Mg ha –1 year –1 , respectively. Stands were cut with a single-pass harvester 2 years after planting and a second time after 3 years of coppice growth; material capacity, limited by poor ground conditions, varied between 21.7 to 31.3 green Mg h –1 . Chemical composition averaged 1.87% inorganics, 7.74% extractives, 26.90% lignin, 38.07% glucan, 13.66% xylan, 1.61% galactan, 1.14% arabinan, and 2.76% mannan. Production costs (USD) projected over a 20-year rotation of six coppice cycles were $71.81 Mg –1 in Washington, $89.91 Mg –1 in Oregon, $98.76 Mg–1 in Idaho, and 179.07 Mg–1 in California. Here, land rental, establishment, crop care, harvest, transportation, and land restoration, respectively, accounted for 23%, 5%, 19%, 30%, 17%, and 6% of total feedstock cost. Farms were successfully restored to conditions existing before poplar conversion. In the absence of fertilization, increases in soil pH and decreases in nitrate-nitrogen, zinc, iron, and organic matter were consistently noted but could not be associated with poplar production alone.

09 BIOMASS FUELS↗

Bio-treatment of poplar via amino acid for interface control in biocomposites

Advanced biocomposites reinforced by abundant biomass-derived fillers can add a revenue stream to enhance the economic viability of biofuel production chains and the energy efficiency of the composite industry. However, the low stiffness of biopolymers limits their use in structural applications. Poplar fibers (mesh size: <180 μm, Populus spp.), an abundant waste from the wood industry, were used as bio-filler to fabricate high-performance biocomposites based on polylactic acid (PLA), in which the poplar fibers were modified by an amino acid (l-lysine). As a benefit of the amino acid treatment, the tensile Young's moduli of the lysine/poplar/PLA composites increased by up to 68% with the addition of a small amount of lysine, compared with neat PLA. At the same time, the tensile strength, failure strain, and Young's modulus of the poplar/PLA composites all increased after adding only 0.1 wt % of lysine. It has been observed that the lysine content has a significant effect on the decomposition temperature, complex viscosity, storage modulus, crystallization temperature, and crystallinity of composites. The fracture surfaces of the composites with an optimum lysine content had fewer voids and were more compact compared with composites without any lysine. The pores on the surfaces of poplar fibers became more available for the penetration of PLA molecules as a result of lysine addition. Finally, this study presents a facile method for reinforcing biocomposites with extremely low-cost and environmentally friendly biofillers.

59 BASIC BIOLOGICAL SCIENCES↗

Carbon fibers derived from liquefied and fractionated poplar lignins: The effect of molecular weight

Lignin recovered from poplar, a key woody biomass resource proposed for lignocellulosic refineries, was investigated for conversion into carbon fibers. Aqueous solutions of ethanol at selected temperatures and compositions, where the requisite solvent and liquefied-lignin phases form, were used to purify and fractionate hybrid poplar (HP) lignin using the Aqueous Lignin Purification with Hot Agents (ALPHA) process. Sugars (<0.1%) and ash (0.01 ± 0.01%) content of the highest molecular weight fraction (Mw = 52 kDa) approached the limits of detection. This 52 kDa fraction could be dry spun with excellent stability and was subsequently converted into carbon fibers having strength (1.1 ± 0.2 GPa) and modulus (78 ± 8 GPa) essentially double those previously achieved with neat poplar and other hardwood lignins. Of equal importance, stabilization times were decreased by a factor of five. Such stabilization and strength/modulus improvements are essential for reducing the overall manufacturing cost of carbon fibers being proposed for cost-sensitive applications.

09 BIOMASS FUELS↗

Molecular response of poplar to single and combined ozone and drought

High concentration in ground-level ozone (O 3 ) and water deficit affect forest ecosystems service. Earlier we found intercellular CO 2 concentration and isoprene emission were affected by the combination of O 3 and drought, but the molecular mechanisms controlling these phenotypes are still open questions. In this study, we examined the stomatal conductance (g s ) and transcriptome changes in an O 3 -sensitive hybrid poplar exposed to two O 3 levels [charcoal-filtered ambient air (CF) and non-filtered ambient air plus 40 ppb (NF40)] and two water conditions [well-watered (W) and moderate drought (D)]. NF40 reduced the g s more under D than W. We identified the differentially expressed genes (DEGs) from pairwise comparisons and found the poplar's molecular response to drought was counteracted by elevated O 3 . From nine clusters obtained through K-means clustering, 12 core transcription factors were identified. DEGs involved in isoprene biosynthesis and phytohormones signal pathways indicate the molecular response and stomatal closure of poplar under O 3 and/or drought might be through MEP/DOXP and ABA-dependent pathways. In addition, 102 Helitrons capturing DEGs were involved in response to O 3 and/or drought and related with ABA-dependent pathway. This integrated analysis provides multi-dimensional insights to understand the molecular response to the combination of O 3 and drought.

59 BASIC BIOLOGICAL SCIENCES↗

Expression of dehydroshikimate dehydratase in poplar induces transcriptional and metabolic changes in the phenylpropanoid pathway

Abstract Modification of lignin in feedstocks via genetic engineering aims to reduce biomass recalcitrance to facilitate efficient conversion processes. These improvements can be achieved by expressing exogenous enzymes that interfere with native biosynthetic pathways responsible for the production of the lignin precursors. In planta expression of a bacterial 3-dehydroshikimate dehydratase in poplar trees reduced lignin content and altered the monomer composition, which enabled higher yields of sugars after cell wall polysaccharide hydrolysis. Understanding how plants respond to such genetic modifications at the transcriptional and metabolic levels is needed to facilitate further improvement and field deployment. In this work, we acquired fundamental knowledge on lignin-modified poplar expressing 3-dehydroshikimate dehydratase using RNA-seq and metabolomics. The data clearly demonstrate that changes in gene expression and metabolite abundance can occur in a strict spatiotemporal fashion, revealing tissue-specific responses in the xylem, phloem, or periderm. In the poplar line that exhibited the strongest reduction in lignin, we found that 3% of the transcripts had altered expression levels and ~19% of the detected metabolites had differential abundance in the xylem from older stems. The changes affected predominantly the shikimate and phenylpropanoid pathways as well as secondary cell wall metabolism, and resulted in significant accumulation of hydroxybenzoates derived from protocatechuate and salicylate.

59 BASIC BIOLOGICAL SCIENCES↗

Modulation of polar auxin transport identifies the molecular determinants of source–sink carbon relationships and sink strength in poplar

Abstract Source-to-sink carbon (C) allocation driven by the sink strength, i.e., the ability of a sink organ to import C, plays a central role in tissue growth and biomass productivity. However, molecular drivers of sink strength have not been thoroughly characterized in trees. Auxin, as a major plant phytohormone, regulates the mobilization of photoassimilates in source tissues and elevates the translocation of carbohydrates toward sink organs, including roots. In this study, we used an ‘auxin-stimulated carbon sink’ approach to understand the molecular processes involved in the long-distance source–sink C allocation in poplar. Poplar cuttings were foliar sprayed with polar auxin transport modulators, including auxin enhancers (AE) (i.e., IBA and IAA) and auxin inhibitor (AI) (i.e., NPA), followed by a comprehensive analysis of leaf, stem and root tissues using biomass evaluation, phenotyping, C isotope labeling, metabolomics and transcriptomics approaches. Auxin modulators altered root dry weight and branching pattern, and AE increased photosynthetically fixed C allocation from leaf to root tissues. The transcriptome analysis identified highly expressed genes in root tissue under AE condition including transcripts encoding polygalacturonase and β-amylase that could increase the sink size and activity. Metabolic analyses showed a shift in overall metabolism including an altered relative abundance levels of galactinol, and an opposite trend in citrate levels in root tissue under AE and AI conditions. In conclusion, we postulate a model suggesting that the source–sink C relationships in poplar could be fueled by mobile sugar alcohols, starch metabolism-derived sugars and TCA-cycle intermediates as key molecular drivers of sink strength.

59 BASIC BIOLOGICAL SCIENCES↗

The WUSCHELa ( PtoWUSa ) is Involved in Developmental Plasticity of Adventitious Root in Poplar

WUSCHEL-RELATED HOMEOBOX (WOX) transcription factors play critical roles in cell fate determination during plant development. As the founding member of the WOX family, WUSCHEL (WUS) is characterized for its role in maintaining stem cell in meristem. In this study, we investigated the function of Populus tomentosa WUSCHELa (PtoWUSa) in adventitious roots (ARs) in poplar. Expression profile analysis showed that PtoWUSa was not only expressed in shoot apical meristem and stem, but also expressed in ARs. Ectopic expression of PtoWUSa in Arabidopsis resulted in shortened primary root, as well as agravitropism and multiple branches. Overexpression of PtoWUSa in poplar increased the number of ARs but decreased their length. Moreover, the AR tip and lateral root tip became larger and swollen. In addition, the expression of auxin transporter genes PIN-FORMED were downregulated in ARs of transgenic plant. Taken together, these results suggest that PtoWUSa could be involved in AR development in poplar through regulating the polar auxin transport in ARs.

59 BASIC BIOLOGICAL SCIENCES↗

An in-depth understanding of biomass recalcitrance using natural poplar variants as the feedstock

Here, in an effort to better understand the biomass recalcitrance, six natural poplar variants were selected as feedstocks based on previous sugar release analysis. Compositional analysis and physicochemical characterizations of these poplars were performed and the correlations between these physicochemical properties and enzymatic hydrolysis yield were investigated. Gel permeation chromatography (GPC) and 13 C solid state NMR were used to determine the degree of polymerization (DP) and crystallinity index (CrI) of cellulose, and the results along with the sugar release study indicated that cellulose DP likely played a more important role in enzymatic hydrolysis. Simons’ stain revealed that the accessible surface area of substrate significantly varied among these variants from 17.3 to 33.2 mg g$–1\atop{biomass}$ as reflected by dye adsorption, and cellulose accessibility was shown as one of the major factors governing substrates digestibility. HSQC and 31 P NMR analysis detailed the structural features of poplar lignin variants. Overall, cellulose relevant factors appeared to have a stronger correlation with glucose release, if any, than lignin structural features. Lignin structural features, such as a phenolic hydroxyl group and the ratio of syringyl and guaiacyl (S/G), were found to have a more convincing impact on xylose release. Low lignin content, low cellulose DP, and high cellulose accessibility generally favor enzymatic hydrolysis; however, recalcitrance cannot be simply judged on any single substrate factor.

09 BIOMASS FUELS↗

Down-regulation of gibberellic acid in poplar has negligible effects on host-plant suitability and insect pest response

Abstract Endogenous levels and signaling of gibberellin plant hormones such as gibberellic acid (GA) have been genetically down-regulated to create semi-dwarf varieties of poplar. The potential benefits of semi-dwarf stature include reduced risk of wind damage, improved stress tolerance, and improved wood quality. Despite these benefits, modification of growth traits may have consequences for non-target traits that confer defense against insect herbivores. According to the growth-differentiation balance hypothesis, reductions in growth may shift allocation of carbon from growth to chemical resistance traits, thereby altering plant defense. To date, host-plant suitability and pest response have not been comprehensively evaluated in GA down-regulated plants. We quantified chemical resistance and nitrogen (an index of protein) in GA down-regulated and wild-type poplar (Populus alba × P. tremula) genotypes. We also evaluated performance of both generalist (Lymantria dispar) and specialist (Chrysomela scripta) insect pests reared on these genotypes. Our evaluation of resistance traits in four GA down-regulated genotypes revealed increased phenolic glycosides in one modified genotype and reduced lignin in two modified genotypes relative to the non-transgenic wild type. Nitrogen levels did not vary significantly among the experimental genotypes. Generalists reared on the four GA down-regulated genotypes exhibited reduced performance on only one modified genotype relative to the wild type. Specialists, however, performed similarly across all genotypes. Results from this study indicate that although some non-target traits varied among GA down-regulated genotypes, the differences in poplar pest susceptibility were modest and highly genotype-specific.

54 ENVIRONMENTAL SCIENCES↗

Water requirements of short rotation poplar coppice: Experimental and modelling analyses across Europe

Poplars are among the most widely used short rotation woody coppice (SRWC) species but due to their assumed high water use, concerns have been raised with respect to large-scale exploitation and potentially detrimental effects on water resources. Here we present a quantitative analysis of the water requirements of poplar SRWC using experimental data and a soil water balance modelling approach at three different sites across Europe. We used (i) eddy covariance (EC) measurements (2004–2006) at an irrigated SRWC grown on a previous rice paddy in northern Italy, (ii) Bowen ratio and energy balance (BREB) measurements (2008–2015) and EC (2011–2015) at a SRWC in rain-fed uplands in the Czech Republic, and (iii) EC measurements (2010–2013) at a SRWC on a previous agricultural land with a shallow water table in Belgium. Without any calibration against water balance component measurements, simulations by the newly developed soil water balance model R-4ET were compared with evapotranspiration (ET) measurements by EC and BREB with a resulting mean root mean square error (RMSE) of 0.75 mm day -1 . In general, there was better agreement between EC and the model (RMSE = 0.66 mm day -1 ) when EC data were adjusted for lack of energy balance closure. A comparison of the simulated and measured soil water content yielded a mean RMSE of 0.03 m 3 m -3 . The mean annual crop coefficient, i.e. the ratio between actual and reference ET, was 0.82 (ranging from 0.65 to 0.95) while the monthly maxima reached 1.16. These values indicated that ET of poplar SRWC was significantly lower than ET of a well-watered grass cover at the annual time scale, but exceeded ET of the reference cover at shorter time scales during the growing season. We show that the model R-4ET is a simple, yet reliable tool for the assessment of water requirements of existing or planned SRWC. For very simple assessments on an annual basis, using a crop coefficient of 0.86 (adjusted to a sub-humid climate), representing an average value across the three sites in years with no evident drought stress, is supported by this analysis.

54 ENVIRONMENTAL SCIENCES↗