Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Secondary antiproton production in relativistic plasmas

The possibility is investigated that the reported excess low energy antiproton component of the cosmic radiation results from proton-proton (p-p) interactions in relativistic plasmas. Because of both target and projectile motion in such plasmas, the antiproton production threshold in the frame of the plasma is much lower than the threshold of antiproton production in cosmic ray interactions with ambient matter. The spectrum of the resultant antiprotons therefore extends to much lower energy than in the cosmic ray case. The antiproton spectrum is calculated for relativistic thermal plasmas and the spectrum is estimated for relativistic nonthermal plasmas. As possible production sites, matter accreting onto compact objects located in the galaxy is considered. Possible overproduction of gamma rays from associated neutral pion production can be avoided if the site is optically thick to the photons but not to the antiprotons. A possible scenario involves a sufficiently large photon density that the neutral pion gamma rays are absorbed by photon-photon pair production. Escape of the antiprotons to the interstellar medium can be mediated by antineutron production.

Dermer, C. D.↗

Neutrino production of electron–positron pairs in a moderately strong magnetic field

Neutrino production of electron–positron pairs via the processes v v-bar → e{sup −}e{sup +} and ν → νe{sup −}e{sup +} in a moderately strong magnetic field is investigated. Under these conditions electrons and positrons can be produced in the states corresponding to excited Landau levels. The results can be used for calculating the efficiency of the electron–positron plasma production by neutrinos in the conditions of the accretion disk around a Kerr black hole.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Focused excimer laser initiated, radio frequency sustained high pressure air plasmas

Measurements and analysis of air breakdown processes and plasma production by focusing 193 nm, 300 mJ, 15 MW high power laser radiation inside a 6 cm diameter helical radio frequency (RF) coil are presented. Quantum resonant multi-photon ionization (REMPI) and collisional cascade laser ionization processes are exploited that have been shown to produce high-density (n{sub e} {approx} 7 x 10{sup 16}/cm{sup 3}) cylindrical seed plasmas at 760 Torr. Air breakdown in lower pressures (from 7-22 Torr), where REMPI is the dominant laser ionization process, is investigated using an UV 18 cm focal length lens, resulting in a laser flux of 5.5 GW/cm{sup 2} at the focal spot. The focused laser power absorption and associated shock wave produce seed plasmas for sustainment by the RF (5 kW incident power, 1.5 s) pulse. Measurements of the helical RF antenna load impedance in the inductive and capacitive coupling regimes are obtained by measuring the loaded antenna reflection coefficient. A 105 GHz interferometer is used to measure the plasma electron density and collision frequency. Spectroscopic measurements of the plasma and comparison with the SPECAIR code are made to determine translational, rotational, and vibrational neutral temperatures and the associated neutral gas temperature. From this and the associated measurement of the gas pressure the electron temperature is obtained. Experiments show that the laser-formed seed plasma allows RF sustainment at higher initial air pressures (up to 22 Torr) than that obtained via RF-only initiation (<18 Torr) by means of a 0.3 J UV laser pulse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ion firehose instability in a dusty plasma considering product-bi-kappa distributions for the plasma particles

We study the dispersion relation for low frequency waves in the whistler mode propagating along the ambient magnetic field, considering ions and electrons with product-bi-kappa (PBK) velocity distributions and taking into account the presence of a population of dust particles. The results obtained by numerical analysis of the dispersion relation show that the decrease in the κ indexes in the ion PBK distribution contributes to the increase in magnitude of the growth rates of the ion firehose instability and the size of the region in wave number space where the instability occurs. It is also shown that the decrease in the κ indexes in the electron PBK distribution contribute to decrease in the growth rates of instability, despite the fact that the instability occurs due to the anisotropy in the ion distribution function. For most of the interval of κ values which has been investigated, the ability of the non-thermal ions to increase the instability overcomes the tendency of decrease due to the non-thermal electron distribution, but for very small values of the kappa indexes the deleterious effect of the non-thermal electrons tends to overcome the effect due to the non-thermal ion distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics of Neutralization of Intense High-Energy Ion Beam Pulses by Electrons

Neutralization and focusing of intense charged particle beam pulses by electrons forms the basis for a wide range of applications to high energy accelerators and colliders, heavy ion fusion, and astrophysics. For example, for ballistic propagation of intense ion beam pulses, background plasma can be used to effectively neutralize the beam charge and current, so that the self-electric and self- magnetic fields do not affect the ballistic propagation of the beam. From the practical perspective of designing advanced plasma sources for beam neutralization, a robust theory should be able to predict the self-electric and self-magnetic fields during beam propagation through the background plasma. The major scaling relations for the self-electric and self-magnetic fields of intense ion charge bunches propagating through background plasma have been determined taking into account the effects of transients during beam entry into the plasma, the excitation of collective plasma waves, the effects of gas ionization, finite electron temperature, and applied solenoidal and dipole magnetic fields. Accounting for plasma production by gas ionization yields a larger self-magnetic field of the ion beam compared to the case without ionization, and a wake of current density and self-magnetic field perturbations is generated behind the beam pulse. A solenoidal magnetic field can be applied for controlling the beam propagation. Making use of theoretical models and advanced numerical simulations, it is shown that even a small applied magnetic field of about 100G can strongly affect the beam neutralization. It has also been demonstrated that in the presence of an applied magnetic field the ion beam pulse can excite large-amplitude whistler waves, thereby producing a complex structure of self-electric and self-magnetic fields. The presence of an applied solenoidal magnetic field may also cause a strong enhancement of the radial self-electric field of the beam pulse propagating through the background plasma. If controlled, this physical effect can be used for optimized beam transport over long distances.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pair production of plasma vortices.

Plasma vortex filaments produced in pairs as shown by image converter photographs of interfaces between magnetic field and accelerated plasma

VORTEX GENERATOR↗

Production of plasma with variable, radial electric fields

A device is described suitable for plasma wave experiments requiring relatively large, variable, radial electric fields perpendicular to a static magnetic field. By separately adjusting the potentials of two independent, coaxial discharge plasmas, the authors produced plasmas with a radial electric field E sub r less than approximately 5 V/cm.

Kustom, B.↗

The new TORPEX in-vessel toroidal conductor for the generation of a poloidal magnetic field

TORoidal Plasma EXperiment (TORPEX) is a Simple Magnetized Torus featuring open helical magnetic field lines obtained from the superposition of a small vertical component on the main toroidal field. This work introduces the experimental setup developed to include a poloidal magnetic field. The toroidal and poloidal fields generate a rotational transform, making the magnetic geometry of TORPEX closer to that of a tokamak. This upgrade opens the possibility to deal with closed and open flux surfaces, as well as with the transition region across the last closed flux surface. The main technical solutions are discussed together with the physical considerations at the basis of the system design. Selected examples of the magnetic configurations accessible with the set of magnetic field coils available on TORPEX are discussed, ranging from single-null X-points to magnetic snowflakes. The simplest magnetic configuration of quasi-circular concentric flux surfaces is tested experimentally. Measurements of the two-dimensional electron plasma density profiles and the particle confinement time are presented, together with the first steps towards the understanding of plasma production mechanisms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Boron ion beam generation utilizing lanthanum hexaboride cathodes: Comparison of vacuum arc and planar magnetron glow

Boron ion beams are widely used for semiconductor ion implantation and for surface modification for improving the operating parameters and increasing the lifetime of machine parts and tools. For the latter application, the purity requirements of boron ion beams are not as stringent as for semiconductor technology, and a composite cathode of lanthanum hexaboride may be suitable for the production of boron ions. We have explored the use of two different approaches to boron plasma production: vacuum arc and planar high power impulse magnetron in self-sputtering mode. For the arc discharge, the boron plasma is generated at cathode spots, whereas for the magnetron discharge, the main process is sputtering of cathode material. We present here the results of comparative test experiments for both kinds of discharge, aimed at determining the optimal discharge parameters for maximum yield of boron ions. For both discharges, the extracted ion beam current reaches hundreds of milliamps and the fraction of boron ions in the total extracted ion beam is as high as 80%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Wave modeling in a cylindrical non-uniform helicon discharge

A radio frequency field solver based on Maxwell's equations and a cold plasma dielectric tensor is employed to describe wave phenomena observed in a cylindrical non-uniform helicon discharge. The experiment is carried out on a recently built linear plasma-material interaction machine: The magnetized plasma interaction experiment [Blackwell et al., Plasma Sources Sci. Technol. (submitted)], in which both plasma density and static magnetic field are functions of axial position. The field strength increases by a factor of 15 from source to target plate, and the plasma density and electron temperature are radially non-uniform. With an enhancement factor of 9.5 to the electron-ion Coulomb collision frequency, a 12% reduction in the antenna radius, and the same other conditions as employed in the experiment, the solver produces axial and radial profiles of wave amplitude and phase that are consistent with measurements. A numerical study on the effects of axial gradient in plasma density and static magnetic field on wave propagations is performed, revealing that the helicon wave has weaker attenuation away from the antenna in a focused field compared to a uniform field. This may be consistent with observations of increased ionization efficiency and plasma production in a non-uniform field. We find that the relationship between plasma density, static magnetic field strength, and axial wavelength agrees well with a simple theory developed previously. A numerical scan of the enhancement factor to the electron-ion Coulomb collision frequency from 1 to 15 shows that the wave amplitude is lowered and the power deposited into the core plasma decreases as the enhancement factor increases, possibly due to the stronger edge heating for higher collision frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O{sub 2} Plasma

Low pressure capacitively coupled plasmas are extensively used for advanced microelectronic device fabrication. Due to long electron mean free path and large bias voltages in this regime, kinetic effects play an important role in the dynamics of low pressure discharges. To take account of the kinetic effects, a one-dimensional hybrid plasma model has been developed that couples the Particle-In-Cell (PIC) technique for charged species and a fluid method for neutral species. The PIC model uses the Monte Carlo Collision (MCC) method to account for collision processes. The fluid model for neutral species takes into account species transport in the plasma, chemical reactions, and surface processes. An electronegative O{sub 2} plasma is simulated for a range of pressures (10-300 mTorr) and rf voltages (200-600 V) at 60 MHz. Our model for the O{sub 2} plasma considers electrons, O{sub 2}{sup +}, O{sup -}, O, and O*. The reaction mechanism includes electron impact dissociation, ionization, dissociative attachment and ion-ion recombination. Computational results are compared to our previous simulations for an electropositive Ar discharge. The electrons primarily absorb power from the external power supply at the sheath edge during sheath expansion. Energetic beam electrons are generated at the sheath edge during electron heating, which are responsible for plasma production and sustenance through collisions. The negative ions are found to be confined in the bulk plasma due to the potential well. The ratio of negative ions to electrons increases with increase in pressure and decrease in rf voltage. The spatial profiles of charged and neutral species in the plasma are found to primarily depend on species sources due to collisional processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of Hydrogen Negative Ion Source with FET based RF System

Characteristics of radio frequency (RF) plasma production were investigated using a FET inverter power supply as a RF generator. High density hydrogen plasma was obtained using an external coil wound a cylindrical ceramic tube (driver region) with RF frequency of lower than 0.5 MHz. When an axial magnetic field around 10 mT was applied to the driver region, an electron density increased drastically and attained to over 10{sup 19} m{sup -3} in the driver region. Effect of the axial magnetic field in driver and expansion region was examined. Lower gas pressure operation below 0.5 Pa was possible with higher RF frequency. H{sup -} density in the expansion region was measured by using laser photo-detachment system. It decreased as the axial magnetic field applied, which was caused by the increase of energetic electron from the driver.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Location of Maximum Credible Beam Losses in LCLS Injector

The memo describes the maximum credible beam the LCLS injector can produce and lose at various locations along the beamline. The estimation procedure is based upon three previous reports [1, 2, 3]. While specific numbers have been updated to accurately reflect the present design parameters, the conclusions are very similar to those given in Ref 1. The source of the maximum credible beam results from the explosive electron emission from the photocathode if the drive laser intensity exceeds the threshold for plasma production. In this event, the gun's RF field can extract a large number of electrons from this plasma which are accelerated out of the gun and into the beamline. This electron emission persists until it has depleted the gun of all its energy. Hence the number of electrons emitted per pulse is limited by the amount of stored RF energy in the gun. It needs to be emphasized that this type of emission is highly undesirable, as it causes permanent damage to the cathode.

43 PARTICLE ACCELERATORS↗

High intensity proton injector for facility of antiproton and ion research

The high current ion source with the low energy beam transport (LEBT) will serve as injector into the proton LINAC to provide primary proton beam for the production of antiprotons. The pulsed ion source developed and built in CEA/Saclay operates with a frequency of 2.45 GHz based on ECR plasma production with two coils with 87.5 mT magnetic field necessary for the electron cyclotron resonance. The compact LEBT consists of two solenoids with a maximum magnetic field of 500 mT including two integrated magnetic steerers to adjust the horizontal and vertical beam positions. The total length of the compact LEBT is 2.3 m and was made as short as possible to reduced emittance growth along the beam line. To measure ion beam intensity behind the pentode extraction system, between solenoids and at the end of the beam line, two current transformers and a Faraday cup are installed. To get information about the beam quality and position, the diagnostic chamber with different equipment will be installed between the two solenoids. This article reports the current status of the proton injector for the facility of antiproton and ion research.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study of Implosion of Combined Nested Arrays

New experimental data on the implosion of plasma of nested kapron−tungsten arrays are obtained at the Angara-5-1 facility. The mode of plasma implosion is implemented in which a shock wave region forms in the space between the inner and outer arrays where a transition from the super-Alfvénic (V{sub r} > V{sub A}) to sub-Alfvénic (V{sub r} < V{sub A}) plasma flow takes place. Specific features of the formation and decay of the shock region are studied using laser shadow imaging and X-ray frame photography. The plasma density in the transition region is estimated. By comparing the experimental data with the results of simulations of quasi-steady implosion of a nested array with allowance for extended plasma production, the physical conditions are determined at which the implosion mode with the formation the shock region takes place. Stable compression of the plasma of the inner array was observed during the implosion of combined nested arrays with a fiber outer array and tungsten inner array. Suppression of magnetic Rayleigh-Taylor instability during the compression of the inner array plasma results in the formation of a compact radiating Z-pinch and generation of a soft X-ray pulse with a peak power of 4 TW and duration of about 5 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Trapped electron plasma formation and equilibrium with a low-power radio-frequency drive

Penning-Malmberg traps confining electron plasmas usually rely on external sources like thermo- and photocathodes. It has been already demonstrated that electron plasmas of comparable densities can be produced by applying a radio-frequency (RF) power to any inner electrode of the trap. Such excitation may result in significant electron heating and ionization of the residual gas with the formation of a plasma column when the RF frequency is of the order or larger than the typical axial bounce frequencies of few-eV electrons, even at RF amplitude of few volts. While discharges are common in plasma generation at higher pressures and RF power, this mechanism is not yet well explored in our working conditions, namely ultra-high vacuum and very low RF power. This plasma production mechanism is very sensitive to the experimental conditions. Interesting phenomena can be observed: transition from a diffuse to a narrow-section, denser plasma column; presence of low-order diocotron modes in transient and steady-state plasmas; modulation of the m=1 diocotron mode and suppression of its instability despite the presence of positive ions and resistive loads. These observations are reported here, and possible explanations are discussed. In addition, a possible electron heating mechanism is investigated with a single-particle, one-dimensional model described by an area-preserving map where an electron bounces within a square potential well and the RF excitation is modelled by a time-oscillating square barrier. The low-energy part of the Poincaré plot includes both quasi-periodic and chaotic regions, where heating up to ionization energies is achievable. Results of a systematic analysis of the map extracting its chaotic properties and scaling laws as a function of the control parameters are reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Student Research Awards - Sherwood Fusion Theory Conference

Student research awards were given for outstanding student presentations at the Annual International Sherwood Fusion Theory Conference, held May 1-3rd 2017 in Annapolis, MD. The goal of controlled thermonuclear fusion research is to develop a safe, environmentally benign, and essentially inexhaustible source of energy for the future. The Annual International Sherwood Fusion Theory Conference is organized for educational and scientific purposes in support of fusion energy and plasma physics research. Specifically, the objective of the Annual Conference shall be the communication of recent results in the physics of controlled fusion energy. This conference is conducted in accordance with the International Council of Scientific Unions guidelines on free circulation of scientists. Papers are solicited on the following topics for the International Sherwood Fusion Theory Conference: Plasma Properties, Equilibrium, Stability, and Transport; Physics of Plasma Edge and Divertor Region; Plasma Production and Heating; Computer Simulation of Plasmas. Student research awards at Sherwood serve several purposes. First, student research awards generally help recruit and retain top students in fusion energy sciences, because they highlight excellence in research and help to develop the CVs of young scientists. Second, the Sherwood Fusion Theory Conference has a long history of student research awards, and continuing this tradition helps to maintain the integrity and impact of past awards. Third, research awards in theory are especially important because they highlight not only individual students, but the entire theory field in fusion energy sciences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗